[pull] master from torvalds:master #6

pull · 2020-07-04T10:57:23Z

See Commits and Changes for more details.

Created by pull[bot]. Want to support this open source service? Please star it : )

Fix the following sparse warning: arch/arm64/xen/../../arm/xen/enlighten.c:244: warning: macro "GRANT_TABLE_PHYSADDR" is not used [-Wunused-macros] It is an isolated macro, and should be removed when its last user was deleted in the following commit 3cf4095 ("arm/xen: Use xen_xlate_map_ballooned_pages to setup grant table") Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>

This is useful for distinguishing SMB sessions on a multiuser mount. Signed-off-by: Paul Aurich <paul@darkrain42.org> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>

Ensure multiuser SMB3 mounts use encryption for all users' tcons if the mount options are configured to require encryption. Without this, only the primary tcon and IPC tcons are guaranteed to be encrypted. Per-user tcons would only be encrypted if the server was configured to require encryption. Signed-off-by: Paul Aurich <paul@darkrain42.org> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>

Without this: - persistent handles will only be enabled for per-user tcons if the server advertises the 'Continuous Availabity' capability - resilient handles would never be enabled for per-user tcons Signed-off-by: Paul Aurich <paul@darkrain42.org> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>

Fixes: 3e7a02d ("smb3: allow disabling requesting leases") Signed-off-by: Paul Aurich <paul@darkrain42.org> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>

Fixes: ca567eb ("SMB3: Allow persistent handle timeout to be configurable on mount") Signed-off-by: Paul Aurich <paul@darkrain42.org> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>

The flag from the primary tcon needs to be copied into the volume info so that cifs_get_tcon will try to enable extensions on the per-user tcon. At that point, since posix extensions must have already been enabled on the superblock, don't try to needlessly adjust the mount flags. Fixes: ce558b0 ("smb3: Add posix create context for smb3.11 posix mounts") Fixes: b326614 ("smb3: allow "posix" mount option to enable new SMB311 protocol extensions") Signed-off-by: Paul Aurich <paul@darkrain42.org> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>

When xfstest generic/035, we found the target file was deleted if the rename return -EACESS. In cifs_rename2, we unlink the positive target dentry if rename failed with EACESS or EEXIST, even if the target dentry is positived before rename. Then the existing file was deleted. We should just delete the target file which created during the rename. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>

The wait_event_... defines evaluate to long so we should not assign it an int as this may truncate the value. Reported-by: Marshall Midden <marshallmidden@gmail.com> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>

xenbus_map_ring_valloc() and its sub-functions are putting quite large structs and arrays on the stack. This is problematic at runtime, but might also result in build failures (e.g. with clang due to the option -Werror,-Wframe-larger-than=... used). Fix that by moving most of the data from the stack into a dynamically allocated struct. Performance is no issue here, as xenbus_map_ring_valloc() is used only when adding a new PV device to a backend driver. While at it move some duplicated code from pv/hvm specific mapping functions to the single caller. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20200701121638.19840-2-jgross@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

Today xenbus_map_ring_valloc() can return either a negative errno value (-ENOMEM or -EINVAL) or a grant status value. This is a mess as e.g -ENOMEM and GNTST_eagain have the same numeric value. Fix that by turning all grant mapping errors into -ENOENT. This is no problem as all callers of xenbus_map_ring_valloc() only use the return value to print an error message, and in case of mapping errors the grant status value has already been printed by __xenbus_map_ring() before. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20200701121638.19840-3-jgross@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

This error path returned directly instead of calling sysctl_head_finish(). Fixes: ef9d965 ("sysctl: reject gigantic reads/write to sysctl files") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull cifs fixes from Steve French: "Eight cifs/smb3 fixes, most when specifying the multiuser mount flag. Five of the fixes are for stable" * tag '5.8-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: prevent truncation from long to int in wait_for_free_credits cifs: Fix the target file was deleted when rename failed. SMB3: Honor 'posix' flag for multiuser mounts SMB3: Honor 'handletimeout' flag for multiuser mounts SMB3: Honor lease disabling for multiuser mounts SMB3: Honor persistent/resilient handle flags for multiuser mounts SMB3: Honor 'seal' flag for multiuser mounts cifs: Display local UID details for SMB sessions in DebugData

…/viro/vfs Pull sysctl fix from Al Viro: "Another regression fix for sysctl changes this cycle..." * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Call sysctl_head_finish on error

…nux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "One small cleanup patch for ARM and two patches for the xenbus driver fixing latent problems (large stack allocations and bad return code settings)" * tag 'for-linus-5.8b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: let xenbus_map_ring_valloc() return errno values only xen/xenbus: avoid large structs and arrays on the stack arm/xen: remove the unused macro GRANT_TABLE_PHYSADDR

After entering kdb due to breakpoint, when we execute 'ss' or 'go' (will delay installing breakpoints, do single-step first), it won't work correctly, and it will enter kdb due to oops. It's because the reason gotten in kdb_stub() is not as expected, and it seems that the ex_vector for single-step should be 0, like what arch powerpc/sh/parisc has implemented. Before the patch: Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry [0]kdb> bp printk Instruction(i) BP #0 at 0xffff8000101486cc (printk) is enabled addr at ffff8000101486cc, hardtype=0 installed=0 [0]kdb> g / # echo h > /proc/sysrq-trigger Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 due to Breakpoint @ 0xffff8000101486cc [3]kdb> ss Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 Oops: (null) due to oops @ 0xffff800010082ab8 CPU: 3 PID: 266 Comm: sh Not tainted 5.7.0-rc4-13839-gf0e5ad491718 #6 Hardware name: linux,dummy-virt (DT) pstate: 00000085 (nzcv daIf -PAN -UAO) pc : el1_irq+0x78/0x180 lr : __handle_sysrq+0x80/0x190 sp : ffff800015003bf0 x29: ffff800015003d20 x28: ffff0000fa878040 x27: 0000000000000000 x26: ffff80001126b1f0 x25: ffff800011b6a0d8 x24: 0000000000000000 x23: 0000000080200005 x22: ffff8000101486cc x21: ffff800015003d30 x20: 0000ffffffffffff x19: ffff8000119f2000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff800015003e50 x7 : 0000000000000002 x6 : 00000000380b9990 x5 : ffff8000106e99e8 x4 : ffff0000fadd83c0 x3 : 0000ffffffffffff x2 : ffff800011b6a0d8 x1 : ffff800011b6a000 x0 : ffff80001130c9d8 Call trace: el1_irq+0x78/0x180 printk+0x0/0x84 write_sysrq_trigger+0xb0/0x118 proc_reg_write+0xb4/0xe0 __vfs_write+0x18/0x40 vfs_write+0xb0/0x1b8 ksys_write+0x64/0xf0 __arm64_sys_write+0x14/0x20 el0_svc_common.constprop.2+0xb0/0x168 do_el0_svc+0x20/0x98 el0_sync_handler+0xec/0x1a8 el0_sync+0x140/0x180 [3]kdb> After the patch: Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry [0]kdb> bp printk Instruction(i) BP #0 at 0xffff8000101486cc (printk) is enabled addr at ffff8000101486cc, hardtype=0 installed=0 [0]kdb> g / # echo h > /proc/sysrq-trigger Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc [0]kdb> g Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc [0]kdb> ss Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to SS trap @ 0xffff800010082ab8 [0]kdb> Fixes: 44679a4 ("arm64: KGDB: Add step debugging support") Signed-off-by: Wei Li <liwei391@huawei.com> Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200509214159.19680-2-liwei391@huawei.com Signed-off-by: Will Deacon <will@kernel.org>

Ido Schimmel says: ==================== mlxsw fixes This patch set contains various fixes for mlxsw. Patches #1-#2 fix two trap related issues introduced in previous cycle. Patches #3-#5 fix rare use-after-frees discovered by syzkaller. After over a week of fuzzing with the fixes, the bugs did not reproduce. Patch #6 from Amit fixes an issue in the ethtool selftest that was recently discovered after running the test on a new platform that supports only 1Gbps and 10Gbps speeds. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function: Direct leak of 28 byte(s) in 4 object(s) allocated from: #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe) #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985 #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140 #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206 #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291 #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299 #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849 #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161 #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207 #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786 #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285 #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369 #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335 #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389 #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431 #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251 #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284 #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593 #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727 #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048 #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127 #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152 #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252 #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347 #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461 #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673 #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2) The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function. Free the token variable before calling read_token in order to plug the leak. Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

There's long existed a lockdep splat because we open our bdev's under the ->device_list_mutex at mount time, which acquires the bd_mutex. Usually this goes unnoticed, but if you do loopback devices at all suddenly the bd_mutex comes with a whole host of other dependencies, which results in the splat when you mount a btrfs file system. ====================================================== WARNING: possible circular locking dependency detected 5.8.0-0.rc3.1.fc33.x86_64+debug #1 Not tainted ------------------------------------------------------ systemd-journal/509 is trying to acquire lock: ffff970831f84db0 (&fs_info->reloc_mutex){+.+.}-{3:3}, at: btrfs_record_root_in_trans+0x44/0x70 [btrfs] but task is already holding lock: ffff97083144d598 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x59/0x560 [btrfs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #6 (sb_pagefaults){.+.+}-{0:0}: __sb_start_write+0x13e/0x220 btrfs_page_mkwrite+0x59/0x560 [btrfs] do_page_mkwrite+0x4f/0x130 do_wp_page+0x3b0/0x4f0 handle_mm_fault+0xf47/0x1850 do_user_addr_fault+0x1fc/0x4b0 exc_page_fault+0x88/0x300 asm_exc_page_fault+0x1e/0x30 -> #5 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x60/0x80 _copy_from_user+0x20/0xb0 get_sg_io_hdr+0x9a/0xb0 scsi_cmd_ioctl+0x1ea/0x2f0 cdrom_ioctl+0x3c/0x12b4 sr_block_ioctl+0xa4/0xd0 block_ioctl+0x3f/0x50 ksys_ioctl+0x82/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&cd->lock){+.+.}-{3:3}: __mutex_lock+0x7b/0x820 sr_block_open+0xa2/0x180 __blkdev_get+0xdd/0x550 blkdev_get+0x38/0x150 do_dentry_open+0x16b/0x3e0 path_openat+0x3c9/0xa00 do_filp_open+0x75/0x100 do_sys_openat2+0x8a/0x140 __x64_sys_openat+0x46/0x70 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&bdev->bd_mutex){+.+.}-{3:3}: __mutex_lock+0x7b/0x820 __blkdev_get+0x6a/0x550 blkdev_get+0x85/0x150 blkdev_get_by_path+0x2c/0x70 btrfs_get_bdev_and_sb+0x1b/0xb0 [btrfs] open_fs_devices+0x88/0x240 [btrfs] btrfs_open_devices+0x92/0xa0 [btrfs] btrfs_mount_root+0x250/0x490 [btrfs] legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x119/0x380 [btrfs] legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 do_mount+0x8c6/0xca0 __x64_sys_mount+0x8e/0xd0 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x7b/0x820 btrfs_run_dev_stats+0x36/0x420 [btrfs] commit_cowonly_roots+0x91/0x2d0 [btrfs] btrfs_commit_transaction+0x4e6/0x9f0 [btrfs] btrfs_sync_file+0x38a/0x480 [btrfs] __x64_sys_fdatasync+0x47/0x80 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x7b/0x820 btrfs_commit_transaction+0x48e/0x9f0 [btrfs] btrfs_sync_file+0x38a/0x480 [btrfs] __x64_sys_fdatasync+0x47/0x80 do_syscall_64+0x52/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&fs_info->reloc_mutex){+.+.}-{3:3}: __lock_acquire+0x1241/0x20c0 lock_acquire+0xb0/0x400 __mutex_lock+0x7b/0x820 btrfs_record_root_in_trans+0x44/0x70 [btrfs] start_transaction+0xd2/0x500 [btrfs] btrfs_dirty_inode+0x44/0xd0 [btrfs] file_update_time+0xc6/0x120 btrfs_page_mkwrite+0xda/0x560 [btrfs] do_page_mkwrite+0x4f/0x130 do_wp_page+0x3b0/0x4f0 handle_mm_fault+0xf47/0x1850 do_user_addr_fault+0x1fc/0x4b0 exc_page_fault+0x88/0x300 asm_exc_page_fault+0x1e/0x30 other info that might help us debug this: Chain exists of: &fs_info->reloc_mutex --> &mm->mmap_lock#2 --> sb_pagefaults Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sb_pagefaults); lock(&mm->mmap_lock#2); lock(sb_pagefaults); lock(&fs_info->reloc_mutex); *** DEADLOCK *** 3 locks held by systemd-journal/509: #0: ffff97083bdec8b8 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x12e/0x4b0 #1: ffff97083144d598 (sb_pagefaults){.+.+}-{0:0}, at: btrfs_page_mkwrite+0x59/0x560 [btrfs] #2: ffff97083144d6a8 (sb_internal){.+.+}-{0:0}, at: start_transaction+0x3f8/0x500 [btrfs] stack backtrace: CPU: 0 PID: 509 Comm: systemd-journal Not tainted 5.8.0-0.rc3.1.fc33.x86_64+debug #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: dump_stack+0x92/0xc8 check_noncircular+0x134/0x150 __lock_acquire+0x1241/0x20c0 lock_acquire+0xb0/0x400 ? btrfs_record_root_in_trans+0x44/0x70 [btrfs] ? lock_acquire+0xb0/0x400 ? btrfs_record_root_in_trans+0x44/0x70 [btrfs] __mutex_lock+0x7b/0x820 ? btrfs_record_root_in_trans+0x44/0x70 [btrfs] ? kvm_sched_clock_read+0x14/0x30 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0xc/0xb0 btrfs_record_root_in_trans+0x44/0x70 [btrfs] start_transaction+0xd2/0x500 [btrfs] btrfs_dirty_inode+0x44/0xd0 [btrfs] file_update_time+0xc6/0x120 btrfs_page_mkwrite+0xda/0x560 [btrfs] ? sched_clock+0x5/0x10 do_page_mkwrite+0x4f/0x130 do_wp_page+0x3b0/0x4f0 handle_mm_fault+0xf47/0x1850 do_user_addr_fault+0x1fc/0x4b0 exc_page_fault+0x88/0x300 ? asm_exc_page_fault+0x8/0x30 asm_exc_page_fault+0x1e/0x30 RIP: 0033:0x7fa3972fdbfe Code: Bad RIP value. Fix this by not holding the ->device_list_mutex at this point. The device_list_mutex exists to protect us from modifying the device list while the file system is running. However it can also be modified by doing a scan on a device. But this action is specifically protected by the uuid_mutex, which we are holding here. We cannot race with opening at this point because we have the ->s_mount lock held during the mount. Not having the ->device_list_mutex here is perfectly safe as we're not going to change the devices at this point. CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add some comments ] Signed-off-by: David Sterba <dsterba@suse.com>

The following deadlock was captured. The first process is holding 'kernfs_mutex' and hung by io. The io was staging in 'r1conf.pending_bio_list' of raid1 device, this pending bio list would be flushed by second process 'md127_raid1', but it was hung by 'kernfs_mutex'. Using sysfs_notify_dirent_safe() to replace sysfs_notify() can fix it. There were other sysfs_notify() invoked from io path, removed all of them. PID: 40430 TASK: ffff8ee9c8c65c40 CPU: 29 COMMAND: "probe_file" #0 [ffffb87c4df37260] __schedule at ffffffff9a8678ec #1 [ffffb87c4df372f8] schedule at ffffffff9a867f06 #2 [ffffb87c4df37310] io_schedule at ffffffff9a0c73e6 #3 [ffffb87c4df37328] __dta___xfs_iunpin_wait_3443 at ffffffffc03a4057 [xfs] #4 [ffffb87c4df373a0] xfs_iunpin_wait at ffffffffc03a6c79 [xfs] #5 [ffffb87c4df373b0] __dta_xfs_reclaim_inode_3357 at ffffffffc039a46c [xfs] #6 [ffffb87c4df37400] xfs_reclaim_inodes_ag at ffffffffc039a8b6 [xfs] #7 [ffffb87c4df37590] xfs_reclaim_inodes_nr at ffffffffc039bb33 [xfs] #8 [ffffb87c4df375b0] xfs_fs_free_cached_objects at ffffffffc03af0e9 [xfs] #9 [ffffb87c4df375c0] super_cache_scan at ffffffff9a287ec7 #10 [ffffb87c4df37618] shrink_slab at ffffffff9a1efd93 #11 [ffffb87c4df37700] shrink_node at ffffffff9a1f5968 #12 [ffffb87c4df37788] do_try_to_free_pages at ffffffff9a1f5ea2 #13 [ffffb87c4df377f0] try_to_free_mem_cgroup_pages at ffffffff9a1f6445 #14 [ffffb87c4df37880] try_charge at ffffffff9a26cc5f #15 [ffffb87c4df37920] memcg_kmem_charge_memcg at ffffffff9a270f6a #16 [ffffb87c4df37958] new_slab at ffffffff9a251430 #17 [ffffb87c4df379c0] ___slab_alloc at ffffffff9a251c85 #18 [ffffb87c4df37a80] __slab_alloc at ffffffff9a25635d #19 [ffffb87c4df37ac0] kmem_cache_alloc at ffffffff9a251f89 #20 [ffffb87c4df37b00] alloc_inode at ffffffff9a2a2b10 #21 [ffffb87c4df37b20] iget_locked at ffffffff9a2a4854 #22 [ffffb87c4df37b60] kernfs_get_inode at ffffffff9a311377 #23 [ffffb87c4df37b80] kernfs_iop_lookup at ffffffff9a311e2b #24 [ffffb87c4df37ba8] lookup_slow at ffffffff9a290118 #25 [ffffb87c4df37c10] walk_component at ffffffff9a291e83 #26 [ffffb87c4df37c78] path_lookupat at ffffffff9a293619 #27 [ffffb87c4df37cd8] filename_lookup at ffffffff9a2953af #28 [ffffb87c4df37de8] user_path_at_empty at ffffffff9a295566 #29 [ffffb87c4df37e10] vfs_statx at ffffffff9a289787 #30 [ffffb87c4df37e70] SYSC_newlstat at ffffffff9a289d5d #31 [ffffb87c4df37f18] sys_newlstat at ffffffff9a28a60e #32 [ffffb87c4df37f28] do_syscall_64 at ffffffff9a003949 #33 [ffffb87c4df37f50] entry_SYSCALL_64_after_hwframe at ffffffff9aa001ad RIP: 00007f617a5f2905 RSP: 00007f607334f838 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 00007f6064044b20 RCX: 00007f617a5f2905 RDX: 00007f6064044b20 RSI: 00007f6064044b20 RDI: 00007f6064005890 RBP: 00007f6064044aa0 R8: 0000000000000030 R9: 000000000000011c R10: 0000000000000013 R11: 0000000000000246 R12: 00007f606417e6d0 R13: 00007f6064044aa0 R14: 00007f6064044b10 R15: 00000000ffffffff ORIG_RAX: 0000000000000006 CS: 0033 SS: 002b PID: 927 TASK: ffff8f15ac5dbd80 CPU: 42 COMMAND: "md127_raid1" #0 [ffffb87c4df07b28] __schedule at ffffffff9a8678ec #1 [ffffb87c4df07bc0] schedule at ffffffff9a867f06 #2 [ffffb87c4df07bd8] schedule_preempt_disabled at ffffffff9a86825e #3 [ffffb87c4df07be8] __mutex_lock at ffffffff9a869bcc #4 [ffffb87c4df07ca0] __mutex_lock_slowpath at ffffffff9a86a013 #5 [ffffb87c4df07cb0] mutex_lock at ffffffff9a86a04f #6 [ffffb87c4df07cc8] kernfs_find_and_get_ns at ffffffff9a311d83 #7 [ffffb87c4df07cf0] sysfs_notify at ffffffff9a314b3a #8 [ffffb87c4df07d18] md_update_sb at ffffffff9a688696 #9 [ffffb87c4df07d98] md_update_sb at ffffffff9a6886d5 #10 [ffffb87c4df07da8] md_check_recovery at ffffffff9a68ad9c #11 [ffffb87c4df07dd0] raid1d at ffffffffc01f0375 [raid1] #12 [ffffb87c4df07ea0] md_thread at ffffffff9a680348 #13 [ffffb87c4df07f08] kthread at ffffffff9a0b8005 #14 [ffffb87c4df07f50] ret_from_fork at ffffffff9aa00344 Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Song Liu <songliubraving@fb.com>

This patch is to fix a crash: #3 [ffffb6580689f898] oops_end at ffffffffa2835bc2 #4 [ffffb6580689f8b8] no_context at ffffffffa28766e7 #5 [ffffb6580689f920] async_page_fault at ffffffffa320135e [exception RIP: f2fs_is_compressed_page+34] RIP: ffffffffa2ba83a2 RSP: ffffb6580689f9d8 RFLAGS: 00010213 RAX: 0000000000000001 RBX: fffffc0f50b34bc0 RCX: 0000000000002122 RDX: 0000000000002123 RSI: 0000000000000c00 RDI: fffffc0f50b34bc0 RBP: ffff97e815a40178 R8: 0000000000000000 R9: ffff97e83ffc9000 R10: 0000000000032300 R11: 0000000000032380 R12: ffffb6580689fa38 R13: fffffc0f50b34bc0 R14: ffff97e825cbd000 R15: 0000000000000c00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffffb6580689f9d8] __is_cp_guaranteed at ffffffffa2b7ea98 #7 [ffffb6580689f9f0] f2fs_submit_page_write at ffffffffa2b81a69 #8 [ffffb6580689fa30] f2fs_do_write_meta_page at ffffffffa2b99777 #9 [ffffb6580689fae0] __f2fs_write_meta_page at ffffffffa2b75f1a #10 [ffffb6580689fb18] f2fs_sync_meta_pages at ffffffffa2b77466 #11 [ffffb6580689fc98] do_checkpoint at ffffffffa2b78e46 #12 [ffffb6580689fd88] f2fs_write_checkpoint at ffffffffa2b79c29 #13 [ffffb6580689fdd0] f2fs_sync_fs at ffffffffa2b69d95 #14 [ffffb6580689fe20] sync_filesystem at ffffffffa2ad2574 #15 [ffffb6580689fe30] generic_shutdown_super at ffffffffa2a9b582 #16 [ffffb6580689fe48] kill_block_super at ffffffffa2a9b6d1 #17 [ffffb6580689fe60] kill_f2fs_super at ffffffffa2b6abe1 #18 [ffffb6580689fea0] deactivate_locked_super at ffffffffa2a9afb6 #19 [ffffb6580689feb8] cleanup_mnt at ffffffffa2abcad4 #20 [ffffb6580689fee0] task_work_run at ffffffffa28bca28 #21 [ffffb6580689ff00] exit_to_usermode_loop at ffffffffa28050b7 #22 [ffffb6580689ff38] do_syscall_64 at ffffffffa280560e #23 [ffffb6580689ff50] entry_SYSCALL_64_after_hwframe at ffffffffa320008c This occurred when umount f2fs if enable F2FS_FS_COMPRESSION with F2FS_IO_TRACE. Fixes it by adding IS_IO_TRACED_PAGE to check validity of pid for page_private. Signed-off-by: Yu Changchun <yuchangchun1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

https://bugzilla.kernel.org/show_bug.cgi?id=208565 PID: 257 TASK: ecdd0000 CPU: 0 COMMAND: "init" #0 [<c0b420ec>] (__schedule) from [<c0b423c8>] #1 [<c0b423c8>] (schedule) from [<c0b459d4>] #2 [<c0b459d4>] (rwsem_down_read_failed) from [<c0b44fa0>] #3 [<c0b44fa0>] (down_read) from [<c044233c>] #4 [<c044233c>] (f2fs_truncate_blocks) from [<c0442890>] #5 [<c0442890>] (f2fs_truncate) from [<c044d408>] #6 [<c044d408>] (f2fs_evict_inode) from [<c030be18>] #7 [<c030be18>] (evict) from [<c030a558>] #8 [<c030a558>] (iput) from [<c047c600>] #9 [<c047c600>] (f2fs_sync_node_pages) from [<c0465414>] #10 [<c0465414>] (f2fs_write_checkpoint) from [<c04575f4>] #11 [<c04575f4>] (f2fs_sync_fs) from [<c0441918>] #12 [<c0441918>] (f2fs_do_sync_file) from [<c0441098>] #13 [<c0441098>] (f2fs_sync_file) from [<c0323fa0>] #14 [<c0323fa0>] (vfs_fsync_range) from [<c0324294>] #15 [<c0324294>] (do_fsync) from [<c0324014>] #16 [<c0324014>] (sys_fsync) from [<c0108bc0>] This can be caused by flush_dirty_inode() in f2fs_sync_node_pages() where iput() requires f2fs_lock_op() again resulting in livelock. Reported-by: Zhiguo Niu <Zhiguo.Niu@unisoc.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

… set We received an error report that perf-record caused 'Segmentation fault' on a newly system (e.g. on the new installed ubuntu). (gdb) backtrace #0 __read_once_size (size=4, res=<synthetic pointer>, p=0x14) at /root/0-jinyao/acme/tools/include/linux/compiler.h:139 #1 atomic_read (v=0x14) at /root/0-jinyao/acme/tools/include/asm/../../arch/x86/include/asm/atomic.h:28 #2 refcount_read (r=0x14) at /root/0-jinyao/acme/tools/include/linux/refcount.h:65 #3 perf_mmap__read_init (map=map@entry=0x0) at mmap.c:177 #4 0x0000561ce5c0de39 in perf_evlist__poll_thread (arg=0x561ce68584d0) at util/sideband_evlist.c:62 #5 0x00007fad78491609 in start_thread (arg=<optimized out>) at pthread_create.c:477 #6 0x00007fad7823c103 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95 The root cause is, evlist__add_bpf_sb_event() just returns 0 if HAVE_LIBBPF_SUPPORT is not defined (inline function path). So it will not create a valid evsel for side-band event. But perf-record still creates BPF side band thread to process the side-band event, then the error happpens. We can reproduce this issue by removing the libelf-dev. e.g. 1. apt-get remove libelf-dev 2. perf record -a -- sleep 1 root@test:~# ./perf record -a -- sleep 1 perf: Segmentation fault Obtained 6 stack frames. ./perf(+0x28eee8) [0x5562d6ef6ee8] /lib/x86_64-linux-gnu/libc.so.6(+0x46210) [0x7fbfdc65f210] ./perf(+0x342e74) [0x5562d6faae74] ./perf(+0x257e39) [0x5562d6ebfe39] /lib/x86_64-linux-gnu/libpthread.so.0(+0x9609) [0x7fbfdc990609] /lib/x86_64-linux-gnu/libc.so.6(clone+0x43) [0x7fbfdc73b103] Segmentation fault (core dumped) To fix this issue, 1. We either install the missing libraries to let HAVE_LIBBPF_SUPPORT be defined. e.g. apt-get install libelf-dev and install other related libraries. 2. Use this patch to skip the side-band event setup if HAVE_LIBBPF_SUPPORT is not set. Committer notes: The side band thread is not used just with BPF, it is also used with --switch-output-event, so narrow the ifdef to the BPF specific part. Fixes: 23cbb41 ("perf record: Move side band evlist setup to separate routine") Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200805022937.29184-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

struct swap_info_struct si.flags could be accessed concurrently as noticed by KCSAN, BUG: KCSAN: data-race in scan_swap_map_slots / swap_readpage write to 0xffff9c77b80ac400 of 8 bytes by task 91325 on cpu 16: scan_swap_map_slots+0x6fe/0xb50 scan_swap_map_slots at mm/swapfile.c:887 get_swap_pages+0x39d/0x5c0 get_swap_page+0x377/0x524 add_to_swap+0xe4/0x1c0 shrink_page_list+0x1740/0x2820 shrink_inactive_list+0x316/0x8b0 shrink_lruvec+0x8dc/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 __alloc_pages_nodemask+0x3bb/0x450 alloc_pages_vma+0x8a/0x2c0 do_anonymous_page+0x170/0x700 __handle_mm_fault+0xc9f/0xd00 handle_mm_fault+0xfc/0x2f0 do_page_fault+0x263/0x6f9 page_fault+0x34/0x40 read to 0xffff9c77b80ac400 of 8 bytes by task 5422 on cpu 7: swap_readpage+0x204/0x6a0 swap_readpage at mm/page_io.c:380 read_swap_cache_async+0xa2/0xb0 swapin_readahead+0x6a0/0x890 do_swap_page+0x465/0xeb0 __handle_mm_fault+0xc7a/0xd00 handle_mm_fault+0xfc/0x2f0 do_page_fault+0x263/0x6f9 page_fault+0x34/0x40 Reported by Kernel Concurrency Sanitizer on: CPU: 7 PID: 5422 Comm: gmain Tainted: G W O L 5.5.0-next-20200204+ #6 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 Other reads, read to 0xffff91ea33eac400 of 8 bytes by task 11276 on cpu 120: __swap_writepage+0x140/0xc20 __swap_writepage at mm/page_io.c:289 read to 0xffff91ea33eac400 of 8 bytes by task 11264 on cpu 16: swap_set_page_dirty+0x44/0x1f4 swap_set_page_dirty at mm/page_io.c:442 The write is under &si->lock, but the reads are done as lockless. Since the reads only check for a specific bit in the flag, it is harmless even if load tearing happens. Thus, just mark them as intentional data races using the data_race() macro. [cai@lca.pw: add a missing annotation] Link: http://lkml.kernel.org/r/1581612585-5812-1-git-send-email-cai@lca.pw Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Marco Elver <elver@google.com> Link: http://lkml.kernel.org/r/20200207003601.1526-1-cai@lca.pw Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

swap_cache_info.* could be accessed concurrently as noticed by KCSAN, BUG: KCSAN: data-race in lookup_swap_cache / lookup_swap_cache write to 0xffffffff85517318 of 8 bytes by task 94138 on cpu 101: lookup_swap_cache+0x12e/0x460 lookup_swap_cache at mm/swap_state.c:322 do_swap_page+0x112/0xeb0 __handle_mm_fault+0xc7a/0xd00 handle_mm_fault+0xfc/0x2f0 do_page_fault+0x263/0x6f9 page_fault+0x34/0x40 read to 0xffffffff85517318 of 8 bytes by task 91655 on cpu 100: lookup_swap_cache+0x117/0x460 lookup_swap_cache at mm/swap_state.c:322 shmem_swapin_page+0xc7/0x9e0 shmem_getpage_gfp+0x2ca/0x16c0 shmem_fault+0xef/0x3c0 __do_fault+0x9e/0x220 do_fault+0x4a0/0x920 __handle_mm_fault+0xc69/0xd00 handle_mm_fault+0xfc/0x2f0 do_page_fault+0x263/0x6f9 page_fault+0x34/0x40 Reported by Kernel Concurrency Sanitizer on: CPU: 100 PID: 91655 Comm: systemd-journal Tainted: G W O L 5.5.0-next-20200204+ #6 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 write to 0xffffffff8d717308 of 8 bytes by task 11365 on cpu 87: __delete_from_swap_cache+0x681/0x8b0 __delete_from_swap_cache at mm/swap_state.c:178 read to 0xffffffff8d717308 of 8 bytes by task 11275 on cpu 53: __delete_from_swap_cache+0x66e/0x8b0 __delete_from_swap_cache at mm/swap_state.c:178 Both the read and write are done as lockless. Since swap_cache_info.* are only used to print out counter information, even if any of them missed a few incremental due to data races, it will be harmless, so just mark it as an intentional data race using the data_race() macro. While at it, fix a checkpatch.pl warning, WARNING: Single statement macros should not use a do {} while (0) loop Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Marco Elver <elver@google.com> Link: http://lkml.kernel.org/r/20200207003715.1578-1-cai@lca.pw Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

struct mem_cgroup_per_node mz.lru_zone_size[zone_idx][lru] could be accessed concurrently as noticed by KCSAN, BUG: KCSAN: data-race in lruvec_lru_size / mem_cgroup_update_lru_size write to 0xffff9c804ca285f8 of 8 bytes by task 50951 on cpu 12: mem_cgroup_update_lru_size+0x11c/0x1d0 mem_cgroup_update_lru_size at mm/memcontrol.c:1266 isolate_lru_pages+0x6a9/0xf30 shrink_active_list+0x123/0xcc0 shrink_lruvec+0x8fd/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 __alloc_pages_nodemask+0x3bb/0x450 alloc_pages_vma+0x8a/0x2c0 do_anonymous_page+0x170/0x700 __handle_mm_fault+0xc9f/0xd00 handle_mm_fault+0xfc/0x2f0 do_page_fault+0x263/0x6f9 page_fault+0x34/0x40 read to 0xffff9c804ca285f8 of 8 bytes by task 50964 on cpu 95: lruvec_lru_size+0xbb/0x270 mem_cgroup_get_zone_lru_size at include/linux/memcontrol.h:536 (inlined by) lruvec_lru_size at mm/vmscan.c:326 shrink_lruvec+0x1d0/0x1380 shrink_node+0x317/0xd80 do_try_to_free_pages+0x1f7/0xa10 try_to_free_pages+0x26c/0x5e0 __alloc_pages_slowpath+0x458/0x1290 __alloc_pages_nodemask+0x3bb/0x450 alloc_pages_current+0xa6/0x120 alloc_slab_page+0x3b1/0x540 allocate_slab+0x70/0x660 new_slab+0x46/0x70 ___slab_alloc+0x4ad/0x7d0 __slab_alloc+0x43/0x70 kmem_cache_alloc+0x2c3/0x420 getname_flags+0x4c/0x230 getname+0x22/0x30 do_sys_openat2+0x205/0x3b0 do_sys_open+0x9a/0xf0 __x64_sys_openat+0x62/0x80 do_syscall_64+0x91/0xb47 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported by Kernel Concurrency Sanitizer on: CPU: 95 PID: 50964 Comm: cc1 Tainted: G W O L 5.5.0-next-20200204+ #6 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 The write is under lru_lock, but the read is done as lockless. The scan count is used to determine how aggressively the anon and file LRU lists should be scanned. Load tearing could generate an inefficient heuristic, so fix it by adding READ_ONCE() for the read. Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Link: http://lkml.kernel.org/r/20200206034945.2481-1-cai@lca.pw Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Read to lru_add_pvec->nr could be interrupted and then write to the same variable. The write has local interrupt disabled, but the plain reads result in data races. However, it is unlikely the compilers could do much damage here given that lru_add_pvec->nr is a "unsigned char" and there is an existing compiler barrier. Thus, annotate the reads using the data_race() macro. The data races were reported by KCSAN, BUG: KCSAN: data-race in lru_add_drain_cpu / rotate_reclaimable_page write to 0xffff9291ebcb8a40 of 1 bytes by interrupt on cpu 23: rotate_reclaimable_page+0x2df/0x490 pagevec_add at include/linux/pagevec.h:81 (inlined by) rotate_reclaimable_page at mm/swap.c:259 end_page_writeback+0x1b5/0x2b0 end_swap_bio_write+0x1d0/0x280 bio_endio+0x297/0x560 dec_pending+0x218/0x430 [dm_mod] clone_endio+0xe4/0x2c0 [dm_mod] bio_endio+0x297/0x560 blk_update_request+0x201/0x920 scsi_end_request+0x6b/0x4a0 scsi_io_completion+0xb7/0x7e0 scsi_finish_command+0x1ed/0x2a0 scsi_softirq_done+0x1c9/0x1d0 blk_done_softirq+0x181/0x1d0 __do_softirq+0xd9/0x57c irq_exit+0xa2/0xc0 do_IRQ+0x8b/0x190 ret_from_intr+0x0/0x42 delay_tsc+0x46/0x80 __const_udelay+0x3c/0x40 __udelay+0x10/0x20 kcsan_setup_watchpoint+0x202/0x3a0 __tsan_read1+0xc2/0x100 lru_add_drain_cpu+0xb8/0x3f0 lru_add_drain+0x25/0x40 shrink_active_list+0xe1/0xc80 shrink_lruvec+0x766/0xb70 shrink_node+0x2d6/0xca0 do_try_to_free_pages+0x1f7/0x9a0 try_to_free_pages+0x252/0x5b0 __alloc_pages_slowpath+0x458/0x1290 __alloc_pages_nodemask+0x3bb/0x450 alloc_pages_vma+0x8a/0x2c0 do_anonymous_page+0x16e/0x6f0 __handle_mm_fault+0xcd5/0xd40 handle_mm_fault+0xfc/0x2f0 do_page_fault+0x263/0x6f9 page_fault+0x34/0x40 read to 0xffff9291ebcb8a40 of 1 bytes by task 37761 on cpu 23: lru_add_drain_cpu+0xb8/0x3f0 lru_add_drain_cpu at mm/swap.c:602 lru_add_drain+0x25/0x40 shrink_active_list+0xe1/0xc80 shrink_lruvec+0x766/0xb70 shrink_node+0x2d6/0xca0 do_try_to_free_pages+0x1f7/0x9a0 try_to_free_pages+0x252/0x5b0 __alloc_pages_slowpath+0x458/0x1290 __alloc_pages_nodemask+0x3bb/0x450 alloc_pages_vma+0x8a/0x2c0 do_anonymous_page+0x16e/0x6f0 __handle_mm_fault+0xcd5/0xd40 handle_mm_fault+0xfc/0x2f0 do_page_fault+0x263/0x6f9 page_fault+0x34/0x40 2 locks held by oom02/37761: #0: ffff9281e5928808 (&mm->mmap_sem#2){++++}, at: do_page_fault #1: ffffffffb3ade380 (fs_reclaim){+.+.}, at: fs_reclaim_acquire.part irq event stamp: 1949217 trace_hardirqs_on_thunk+0x1a/0x1c __do_softirq+0x2e7/0x57c __do_softirq+0x34c/0x57c irq_exit+0xa2/0xc0 Reported by Kernel Concurrency Sanitizer on: CPU: 23 PID: 37761 Comm: oom02 Not tainted 5.6.0-rc3-next-20200226+ #6 Hardware name: HP ProLiant BL660c Gen9, BIOS I38 10/17/2018 Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Marco Elver <elver@google.com> Link: http://lkml.kernel.org/r/20200228044018.1263-1-cai@lca.pw Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

BUG: KCSAN: data-race in page_cpupid_xchg_last / put_page write (marked) to 0xfffffc0d48ec1a00 of 8 bytes by task 91442 on cpu 3: page_cpupid_xchg_last+0x51/0x80 page_cpupid_xchg_last at mm/mmzone.c:109 (discriminator 11) wp_page_reuse+0x3e/0xc0 wp_page_reuse at mm/memory.c:2453 do_wp_page+0x472/0x7b0 do_wp_page at mm/memory.c:2798 __handle_mm_fault+0xcb0/0xd00 handle_pte_fault at mm/memory.c:4049 (inlined by) __handle_mm_fault at mm/memory.c:4163 handle_mm_fault+0xfc/0x2f0 handle_mm_fault at mm/memory.c:4200 do_page_fault+0x263/0x6f9 do_user_addr_fault at arch/x86/mm/fault.c:1465 (inlined by) do_page_fault at arch/x86/mm/fault.c:1539 page_fault+0x34/0x40 read to 0xfffffc0d48ec1a00 of 8 bytes by task 94817 on cpu 69: put_page+0x15a/0x1f0 page_zonenum at include/linux/mm.h:923 (inlined by) is_zone_device_page at include/linux/mm.h:929 (inlined by) page_is_devmap_managed at include/linux/mm.h:948 (inlined by) put_page at include/linux/mm.h:1023 wp_page_copy+0x571/0x930 wp_page_copy at mm/memory.c:2615 do_wp_page+0x107/0x7b0 __handle_mm_fault+0xcb0/0xd00 handle_mm_fault+0xfc/0x2f0 do_page_fault+0x263/0x6f9 page_fault+0x34/0x40 Reported by Kernel Concurrency Sanitizer on: CPU: 69 PID: 94817 Comm: systemd-udevd Tainted: G W O L 5.5.0-next-20200204+ #6 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 A page never changes its zone number. The zone number happens to be stored in the same word as other bits which are modified, but the zone number bits will never be modified by any other write, so it can accept a reload of the zone bits after an intervening write and it don't need to use READ_ONCE(). Thus, annotate this data race using ASSERT_EXCLUSIVE_BITS() to also assert that there are no concurrent writes to it. Suggested-by: Marco Elver <elver@google.com> Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Link: http://lkml.kernel.org/r/1581619089-14472-1-git-send-email-cai@lca.pw Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Daniel Machon says: ==================== net: sparx5: add support for lan969x switch device == Description: This series is the second of a multi-part series, that prepares and adds support for the new lan969x switch driver. The upstreaming efforts is split into multiple series (might change a bit as we go along): 1) Prepare the Sparx5 driver for lan969x (merged) --> 2) add support lan969x (same basic features as Sparx5 provides excl. FDMA and VCAP). 3) Add support for lan969x VCAP, FDMA and RGMII == Lan969x in short: The lan969x Ethernet switch family [1] provides a rich set of switching features and port configurations (up to 30 ports) from 10Mbps to 10Gbps, with support for RGMII, SGMII, QSGMII, USGMII, and USXGMII, ideal for industrial & process automation infrastructure applications, transport, grid automation, power substation automation, and ring & intra-ring topologies. The LAN969x family is hardware and software compatible and scalable supporting 46Gbps to 102Gbps switch bandwidths. == Preparing Sparx5 for lan969x: The main preparation work for lan969x has already been merged [1]. After this series is applied, lan969x will have the same functionality as Sparx5, except for VCAP and FDMA support. QoS features that requires the VCAP (e.g. PSFP, port mirroring) will obviously not work until VCAP support is added later. == Patch breakdown: Patch #1-#4 do some preparation work for lan969x Patch #5 adds new registers required by lan969x Patch #6 adds initial match data for all lan969x targets Patch #7 defines the lan969x register differences Patch #8 adds lan969x constants to match data Patch #9 adds some lan969x ops in bulk Patch #10 adds PTP function to ops Patch #11 adds lan969x_calendar.c for calculating the calendar Patch #12 makes additional use of the is_sparx5() macro to branch out in certain places. Patch #13 documents lan969x in the dt-bindings Patch #14 adds lan969x compatible string to sparx5 driver Patch #15 introduces new concept of per-target features [1] https://lore.kernel.org/netdev/20241004-b4-sparx5-lan969x-switch-driver-v2-0-d3290f581663@microchip.com/ v1: https://lore.kernel.org/20241021-sparx5-lan969x-switch-driver-2-v1-0-c8c49ef21e0f@microchip.com ==================== Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-0-a0b5fae88a0f@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Machon says: ==================== net: lan969x: add VCAP functionality == Description: This series is the third of a multi-part series, that prepares and adds support for the new lan969x switch driver. The upstreaming efforts is split into multiple series (might change a bit as we go along): 1) Prepare the Sparx5 driver for lan969x (merged) 2) Add support for lan969x (same basic features as Sparx5 provides excl. FDMA and VCAP, merged). --> 3) Add lan969x VCAP functionality. 4) Add RGMII and FDMA functionality. == VCAP support: The Versatile Content-Aware Processor (VCAP) is a content-aware packet processor that allows wirespeed packet inspection for rich implementation of, for example, advanced VLAN and QoS classification and manipulations, IP source guarding, longest prefix matching for Layer-3 routing, and security features for wireline and wireless applications. This is all achieved by programming rules into the VCAP. When a VCAP is enabled, every frame passing through the switch is analyzed and multiple keys are created based on the contents of the frame. The frame is examined to determine the frame type (for example, IPv4 TCP frame), so that the frame information is extracted according to the frame type, port-specific configuration, and classification results from the basic classification. Keys are applied to the VCAP and when there is a match between a key and a rule in the VCAP, the rule is then applied to the frame from which the key was extracted. After this series is applied, the lan969x driver will support the same VCAP functionality as Sparx5. == Patch breakdown: Patch #1 exposes some VCAP symbols for lan969x. Patch #2 replaces VCAP uses of SPX5_PORTS with n_ports from the match data. Patch #3 adds new VCAP constants to match data Patch #4 removes the is_sparx5() check to now initialize the VCAP API on lan969x. Patch #5 adds the auto-generated VCAP data for lan969x. Patch #6 adds the VCAP configuration data for lan969x. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> ==================== Link: https://patch.msgid.link/20241101-sparx5-lan969x-switch-driver-3-v1-0-3c76f22f4bfa@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The following handshake mechanism needs be followed after firmware download is completed to bring the firmware to running state. After firmware fragments of Operational image are downloaded and secure sends result of the image succeeds, 1. Driver sends HCI Intel reset with boot option #1 to switch FW image. 2. FW sends Alive GP[0] MSIx 3. Driver enables data path (doorbell 0x460 for RBDs, etc...) 4. Driver gets Bootup event from firmware 5. Driver performs D0 entry to device (WRITE to IPC_Sleep_Control =0x0) 6. FW sends Alive GP[0] MSIx 7. Device host interface is fully set for BT protocol stack operation. 8. Driver may optionally get debug event with ID 0x97 which can be dropped For Intermediate loadger image, all the above steps are applicable expcept #5 and #6. On HCI_OP_RESET, firmware raises alive interrupt. Driver needs to wait for it before passing control over to bluetooth stack. Co-developed-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com> Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Patch series "page allocation tag compression", v4. This patchset implements several improvements: 1. Gracefully handles module unloading while there are used allocations allocated from that module; 2. Provides an option to store page allocation tag references in the page flags, removing dependency on page extensions and eliminating the memory overhead from storing page allocation references (~0.2% of total system memory). This also improves page allocation performance when CONFIG_MEM_ALLOC_PROFILING is enabled by eliminating page extension lookup. Page allocation performance overhead is reduced from 41% to 5.5%. Patch #1 introduces mas_for_each_rev() helper function. Patch #2 introduces shutdown_mem_profiling() helper function to be used when disabling memory allocation profiling. Patch #3 copies module tags into virtually contiguous memory which serves two purposes: - Lets us deal with the situation when module is unloaded while there are still live allocations from that module. Since we are using a copy version of the tags we can safely unload the module. Space and gaps in this contiguous memory are managed using a maple tree. - Enables simple indexing of the tags in the later patches. Patch #4 changes the way we allocate virtually contiguous memory for module tags to reserve only vitrual area and populate physical pages only as needed at module load time. Patch #5 abstracts page allocation tag reference to simplify later changes. Patch #6 adds compression option to the sysctl.vm.mem_profiling boot parameter for storing page allocation tag references inside page flags if they fit. If the number of available page flag bits is insufficient to address all kernel allocations, memory allocation profiling gets disabled with an appropriate warning. This patch (of 6): Add mas_for_each_rev() function to iterate maple tree nodes in reverse order. Link: https://lkml.kernel.org/r/20241023170759.999909-1-surenb@google.com Link: https://lkml.kernel.org/r/20241023170759.999909-2-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Suggested-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Gomez <da.gomez@samsung.com> Cc: David Hildenbrand <david@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Petr Pavlu <petr.pavlu@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sourav Panda <souravpanda@google.com> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Huth <thuth@redhat.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xiongwei Song <xiongwei.song@windriver.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "Improve the copy of task comm", v8. Using {memcpy,strncpy,strcpy,kstrdup} to copy the task comm relies on the length of task comm. Changes in the task comm could result in a destination string that is overflow. Therefore, we should explicitly ensure the destination string is always NUL-terminated, regardless of the task comm. This approach will facilitate future extensions to the task comm. As suggested by Linus [0], we can identify all relevant code with the following git grep command: git grep 'memcpy.*->comm\>' git grep 'kstrdup.*->comm\>' git grep 'strncpy.*->comm\>' git grep 'strcpy.*->comm\>' PATCH #2~#4: memcpy PATCH #5~#6: kstrdup PATCH #7: strcpy Please note that strncpy() is not included in this series as it is being tracked by another effort. [1] This patch (of 7): We want to eliminate the use of __get_task_comm() for the following reasons: - The task_lock() is unnecessary Quoted from Linus [0]: : Since user space can randomly change their names anyway, using locking : was always wrong for readers (for writers it probably does make sense : to have some lock - although practically speaking nobody cares there : either, but at least for a writer some kind of race could have : long-term mixed results Link: https://lkml.kernel.org/r/20241007144911.27693-1-laoar.shao@gmail.com Link: https://lkml.kernel.org/r/20241007144911.27693-2-laoar.shao@gmail.com Link: https://lore.kernel.org/all/CAHk-=wivfrF0_zvf+oj6==Sh=-npJooP8chLPEfaFV0oNYTTBA@mail.gmail.com [0] Link: https://lore.kernel.org/all/CAHk-=whWtUC-AjmGJveAETKOMeMFSTwKwu99v7+b6AyHMmaDFA@mail.gmail.com/ Link: https://lore.kernel.org/all/CAHk-=wjAmmHUg6vho1KjzQi2=psR30+CogFd4aXrThr2gsiS4g@mail.gmail.com/ [0] Link: KSPP#90 [1] Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Matus Jokay <matus.jokay@stuba.sk> Cc: Alejandro Colomar <alx@kernel.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Justin Stitt <justinstitt@google.com> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@gmail.com> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Maxime Ripard <mripard@kernel.org> Cc: Ondrej Mosnacek <omosnace@redhat.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Quentin Monnet <qmo@kernel.org> Cc: Simon Horman <horms@kernel.org> Cc: Stephen Smalley <stephen.smalley.work@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Hou Tao says: ==================== This patch set fixes several issues for LPM trie. These issues were found during adding new test cases or were reported by syzbot. The patch set is structured as follows: Patch #1~#2 are clean-ups for lpm_trie_update_elem(). Patch #3 handles BPF_EXIST and BPF_NOEXIST correctly for LPM trie. Patch #4 fixes the accounting of n_entries when doing in-place update. Patch #5 fixes the exact match condition in trie_get_next_key() and it may skip keys when the passed key is not found in the map. Patch #6~#7 switch from kmalloc() to bpf memory allocator for LPM trie to fix several lock order warnings reported by syzbot. It also enables raw_spinlock_t for LPM trie again. After these changes, the LPM trie will be closer to being usable in any context (though the reentrance check of trie->lock is still missing, but it is on my todo list). Patch #8: move test_lpm_map to map_tests to make it run regularly. Patch #9: add test cases for the issues fixed by patch #3~#5. Please see individual patches for more details. Comments are always welcome. Change Log: v3: * patch #2: remove the unnecessary NULL-init for im_node * patch #6: alloc the leaf node before disabling IRQ to low the possibility of -ENOMEM when leaf_size is large; Free these nodes outside the trie lock (Suggested by Alexei) * collect review and ack tags (Thanks for Toke & Daniel) v2: https://lore.kernel.org/bpf/20241127004641.1118269-1-houtao@huaweicloud.com/ * collect review tags (Thanks for Toke) * drop "Add bpf_mem_cache_is_mergeable() helper" patch * patch #3~#4: add fix tag * patch #4: rename the helper to trie_check_add_elem() and increase n_entries in it. * patch #6: use one bpf mem allocator and update commit message to clarify that using bpf mem allocator is more appropriate. * patch #7: update commit message to add the possible max running time for update operation. * patch #9: update commit message to specify the purpose of these test cases. v1: https://lore.kernel.org/bpf/20241118010808.2243555-1-houtao@huaweicloud.com/ ==================== Link: https://lore.kernel.org/all/20241206110622.1161752-1-houtao@huaweicloud.com/ Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Kernel will hang on destroy admin_q while we create ctrl failed, such as following calltrace: PID: 23644 TASK: ff2d52b40f439fc0 CPU: 2 COMMAND: "nvme" #0 [ff61d23de260fb78] __schedule at ffffffff8323bc15 #1 [ff61d23de260fc08] schedule at ffffffff8323c014 #2 [ff61d23de260fc28] blk_mq_freeze_queue_wait at ffffffff82a3dba1 #3 [ff61d23de260fc78] blk_freeze_queue at ffffffff82a4113a #4 [ff61d23de260fc90] blk_cleanup_queue at ffffffff82a33006 #5 [ff61d23de260fcb0] nvme_rdma_destroy_admin_queue at ffffffffc12686ce #6 [ff61d23de260fcc8] nvme_rdma_setup_ctrl at ffffffffc1268ced #7 [ff61d23de260fd28] nvme_rdma_create_ctrl at ffffffffc126919b #8 [ff61d23de260fd68] nvmf_dev_write at ffffffffc024f362 #9 [ff61d23de260fe38] vfs_write at ffffffff827d5f25 RIP: 00007fda7891d574 RSP: 00007ffe2ef06958 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 000055e8122a4d90 RCX: 00007fda7891d574 RDX: 000000000000012b RSI: 000055e8122a4d90 RDI: 0000000000000004 RBP: 00007ffe2ef079c0 R8: 000000000000012b R9: 000055e8122a4d90 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000004 R13: 000055e8122923c0 R14: 000000000000012b R15: 00007fda78a54500 ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b This due to we have quiesced admi_q before cancel requests, but forgot to unquiesce before destroy it, as a result we fail to drain the pending requests, and hang on blk_mq_freeze_queue_wait() forever. Here try to reuse nvme_rdma_teardown_admin_queue() to fix this issue and simplify the code. Fixes: 958dc1d ("nvme-rdma: add clean action for failed reconnection") Reported-by: Yingfu.zhou <yingfu.zhou@shopee.com> Signed-off-by: Chunguang.xu <chunguang.xu@shopee.com> Signed-off-by: Yue.zhao <yue.zhao@shopee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>

When the power mode change is successful but the power mode hasn't actually changed, the post notification was missed. Similar to the approach with hibernate/clock scale/hce enable, having pre/post notifications in the same function will make it easier to maintain. Additionally, supplement the description of power parameters for the pwr_change_notify callback. Fixes: 7eb584d ("ufs: refactor configuring power mode") Cc: stable@vger.kernel.org #6.11.x Signed-off-by: Peter Wang <peter.wang@mediatek.com> Link: https://lore.kernel.org/r/20241122024943.30589-1-peter.wang@mediatek.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Its used from trace__run(), for the 'perf trace' live mode, i.e. its strace-like, non-perf.data file processing mode, the most common one. The trace__run() function will set trace->host using machine__new_host() that is supposed to give a machine instance representing the running machine, and since we'll use perf_env__arch_strerrno() to get the right errno -> string table, we need to use machine->env, so initialize it in machine__new_host(). Before the patch: (gdb) run trace --errno-summary -a sleep 1 <SNIP> Summary of events: gvfs-afc-volume (3187), 2 events, 0.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ pselect6 1 0 0.000 0.000 0.000 0.000 0.00% GUsbEventThread (3519), 2 events, 0.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ poll 1 0 0.000 0.000 0.000 0.000 0.00% <SNIP> Program received signal SIGSEGV, Segmentation fault. 0x00000000005caba0 in perf_env__arch_strerrno (env=0x0, err=110) at util/env.c:478 478 if (env->arch_strerrno == NULL) (gdb) bt #0 0x00000000005caba0 in perf_env__arch_strerrno (env=0x0, err=110) at util/env.c:478 #1 0x00000000004b75d2 in thread__dump_stats (ttrace=0x14f58f0, trace=0x7fffffffa5b0, fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>) at builtin-trace.c:4673 #2 0x00000000004b78bf in trace__fprintf_thread (fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>, thread=0x10fa0b0, trace=0x7fffffffa5b0) at builtin-trace.c:4708 #3 0x00000000004b7ad9 in trace__fprintf_thread_summary (trace=0x7fffffffa5b0, fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>) at builtin-trace.c:4747 #4 0x00000000004b656e in trace__run (trace=0x7fffffffa5b0, argc=2, argv=0x7fffffffde60) at builtin-trace.c:4456 #5 0x00000000004ba43e in cmd_trace (argc=2, argv=0x7fffffffde60) at builtin-trace.c:5487 #6 0x00000000004c0414 in run_builtin (p=0xec3068 <commands+648>, argc=5, argv=0x7fffffffde60) at perf.c:351 #7 0x00000000004c06bb in handle_internal_command (argc=5, argv=0x7fffffffde60) at perf.c:404 #8 0x00000000004c0814 in run_argv (argcp=0x7fffffffdc4c, argv=0x7fffffffdc40) at perf.c:448 #9 0x00000000004c0b5d in main (argc=5, argv=0x7fffffffde60) at perf.c:560 (gdb) After: root@number:~# perf trace -a --errno-summary sleep 1 <SNIP> pw-data-loop (2685), 1410 events, 16.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ epoll_wait 188 0 983.428 0.000 5.231 15.595 8.68% ioctl 94 0 0.811 0.004 0.009 0.016 2.82% read 188 0 0.322 0.001 0.002 0.006 5.15% write 141 0 0.280 0.001 0.002 0.018 8.39% timerfd_settime 94 0 0.138 0.001 0.001 0.007 6.47% gnome-control-c (179406), 1848 events, 20.9% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ poll 222 0 959.577 0.000 4.322 21.414 11.40% recvmsg 150 0 0.539 0.001 0.004 0.013 5.12% write 300 0 0.442 0.001 0.001 0.007 3.29% read 150 0 0.183 0.001 0.001 0.009 5.53% getpid 102 0 0.101 0.000 0.001 0.008 7.82% root@number:~# Fixes: 54373b5 ("perf env: Introduce perf_env__arch_strerrno()") Reported-by: Veronika Molnarova <vmolnaro@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Veronika Molnarova <vmolnaro@redhat.com> Acked-by: Michael Petlan <mpetlan@redhat.com> Tested-by: Michael Petlan <mpetlan@redhat.com> Link: https://lore.kernel.org/r/Z0XffUgNSv_9OjOi@x1 Signed-off-by: Namhyung Kim <namhyung@kernel.org>

…le_direct_reclaim() The task sometimes continues looping in throttle_direct_reclaim() because allow_direct_reclaim(pgdat) keeps returning false. #0 [ffff80002cb6f8d0] __switch_to at ffff8000080095ac #1 [ffff80002cb6f900] __schedule at ffff800008abbd1c #2 [ffff80002cb6f990] schedule at ffff800008abc50c #3 [ffff80002cb6f9b0] throttle_direct_reclaim at ffff800008273550 #4 [ffff80002cb6fa20] try_to_free_pages at ffff800008277b68 #5 [ffff80002cb6fae0] __alloc_pages_nodemask at ffff8000082c4660 #6 [ffff80002cb6fc50] alloc_pages_vma at ffff8000082e4a98 #7 [ffff80002cb6fca0] do_anonymous_page at ffff80000829f5a8 #8 [ffff80002cb6fce0] __handle_mm_fault at ffff8000082a5974 #9 [ffff80002cb6fd90] handle_mm_fault at ffff8000082a5bd4 At this point, the pgdat contains the following two zones: NODE: 4 ZONE: 0 ADDR: ffff00817fffe540 NAME: "DMA32" SIZE: 20480 MIN/LOW/HIGH: 11/28/45 VM_STAT: NR_FREE_PAGES: 359 NR_ZONE_INACTIVE_ANON: 18813 NR_ZONE_ACTIVE_ANON: 0 NR_ZONE_INACTIVE_FILE: 50 NR_ZONE_ACTIVE_FILE: 0 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 NODE: 4 ZONE: 1 ADDR: ffff00817fffec00 NAME: "Normal" SIZE: 8454144 PRESENT: 98304 MIN/LOW/HIGH: 68/166/264 VM_STAT: NR_FREE_PAGES: 146 NR_ZONE_INACTIVE_ANON: 94668 NR_ZONE_ACTIVE_ANON: 3 NR_ZONE_INACTIVE_FILE: 735 NR_ZONE_ACTIVE_FILE: 78 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 In allow_direct_reclaim(), while processing ZONE_DMA32, the sum of inactive/active file-backed pages calculated in zone_reclaimable_pages() based on the result of zone_page_state_snapshot() is zero. Additionally, since this system lacks swap, the calculation of inactive/ active anonymous pages is skipped. crash> p nr_swap_pages nr_swap_pages = $1937 = { counter = 0 } As a result, ZONE_DMA32 is deemed unreclaimable and skipped, moving on to the processing of the next zone, ZONE_NORMAL, despite ZONE_DMA32 having free pages significantly exceeding the high watermark. The problem is that the pgdat->kswapd_failures hasn't been incremented. crash> px ((struct pglist_data *) 0xffff00817fffe540)->kswapd_failures $1935 = 0x0 This is because the node deemed balanced. The node balancing logic in balance_pgdat() evaluates all zones collectively. If one or more zones (e.g., ZONE_DMA32) have enough free pages to meet their watermarks, the entire node is deemed balanced. This causes balance_pgdat() to exit early before incrementing the kswapd_failures, as it considers the overall memory state acceptable, even though some zones (like ZONE_NORMAL) remain under significant pressure. The patch ensures that zone_reclaimable_pages() includes free pages (NR_FREE_PAGES) in its calculation when no other reclaimable pages are available (e.g., file-backed or anonymous pages). This change prevents zones like ZONE_DMA32, which have sufficient free pages, from being mistakenly deemed unreclaimable. By doing so, the patch ensures proper node balancing, avoids masking pressure on other zones like ZONE_NORMAL, and prevents infinite loops in throttle_direct_reclaim() caused by allow_direct_reclaim(pgdat) repeatedly returning false. The kernel hangs due to a task stuck in throttle_direct_reclaim(), caused by a node being incorrectly deemed balanced despite pressure in certain zones, such as ZONE_NORMAL. This issue arises from zone_reclaimable_pages() returning 0 for zones without reclaimable file- backed or anonymous pages, causing zones like ZONE_DMA32 with sufficient free pages to be skipped. The lack of swap or reclaimable pages results in ZONE_DMA32 being ignored during reclaim, masking pressure in other zones. Consequently, pgdat->kswapd_failures remains 0 in balance_pgdat(), preventing fallback mechanisms in allow_direct_reclaim() from being triggered, leading to an infinite loop in throttle_direct_reclaim(). This patch modifies zone_reclaimable_pages() to account for free pages (NR_FREE_PAGES) when no other reclaimable pages exist. This ensures zones with sufficient free pages are not skipped, enabling proper balancing and reclaim behavior. [akpm@linux-foundation.org: coding-style cleanups] Link: https://lkml.kernel.org/r/20241130164346.436469-1-snishika@redhat.com Link: https://lkml.kernel.org/r/20241130161236.433747-2-snishika@redhat.com Fixes: 5a1c84b ("mm: remove reclaim and compaction retry approximations") Signed-off-by: Seiji Nishikawa <snishika@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Nvidia's Tegra MGBE controllers require the IOMMU "Stream ID" (SID) to be written to the MGBE_WRAP_AXI_ASID0_CTRL register. The current driver is hard coded to use MGBE0's SID for all controllers. This causes softirq time outs and kernel panics when using controllers other than MGBE0. Example dmesg errors when an ethernet cable is connected to MGBE1: [ 116.133290] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx [ 121.851283] tegra-mgbe 6910000.ethernet eth1: NETDEV WATCHDOG: CPU: 5: transmit queue 0 timed out 5690 ms [ 121.851782] tegra-mgbe 6910000.ethernet eth1: Reset adapter. [ 121.892464] tegra-mgbe 6910000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 121.905920] tegra-mgbe 6910000.ethernet eth1: PHY [stmmac-1:00] driver [Aquantia AQR113] (irq=171) [ 121.907356] tegra-mgbe 6910000.ethernet eth1: Enabling Safety Features [ 121.907578] tegra-mgbe 6910000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported [ 121.908399] tegra-mgbe 6910000.ethernet eth1: registered PTP clock [ 121.908582] tegra-mgbe 6910000.ethernet eth1: configuring for phy/10gbase-r link mode [ 125.961292] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx [ 181.921198] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 181.921404] rcu: 7-....: (1 GPs behind) idle=540c/1/0x4000000000000002 softirq=1748/1749 fqs=2337 [ 181.921684] rcu: (detected by 4, t=6002 jiffies, g=1357, q=1254 ncpus=8) [ 181.921878] Sending NMI from CPU 4 to CPUs 7: [ 181.921886] NMI backtrace for cpu 7 [ 181.922131] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Kdump: loaded Not tainted 6.13.0-rc3+ #6 [ 181.922390] Hardware name: NVIDIA CTI Forge + Orin AGX/Jetson, BIOS 202402.1-Unknown 10/28/2024 [ 181.922658] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 181.922847] pc : handle_softirqs+0x98/0x368 [ 181.922978] lr : __do_softirq+0x18/0x20 [ 181.923095] sp : ffff80008003bf50 [ 181.923189] x29: ffff80008003bf50 x28: 0000000000000008 x27: 0000000000000000 [ 181.923379] x26: ffffce78ea277000 x25: 0000000000000000 x24: 0000001c61befda0 [ 181.924486] x23: 0000000060400009 x22: ffffce78e99918bc x21: ffff80008018bd70 [ 181.925568] x20: ffffce78e8bb00d8 x19: ffff80008018bc20 x18: 0000000000000000 [ 181.926655] x17: ffff318ebe7d3000 x16: ffff800080038000 x15: 0000000000000000 [ 181.931455] x14: ffff000080816680 x13: ffff318ebe7d3000 x12: 000000003464d91d [ 181.938628] x11: 0000000000000040 x10: ffff000080165a70 x9 : ffffce78e8bb0160 [ 181.945804] x8 : ffff8000827b3160 x7 : f9157b241586f343 x6 : eeb6502a01c81c74 [ 181.953068] x5 : a4acfcdd2e8096bb x4 : ffffce78ea277340 x3 : 00000000ffffd1e1 [ 181.960329] x2 : 0000000000000101 x1 : ffffce78ea277340 x0 : ffff318ebe7d3000 [ 181.967591] Call trace: [ 181.970043] handle_softirqs+0x98/0x368 (P) [ 181.974240] __do_softirq+0x18/0x20 [ 181.977743] ____do_softirq+0x14/0x28 [ 181.981415] call_on_irq_stack+0x24/0x30 [ 181.985180] do_softirq_own_stack+0x20/0x30 [ 181.989379] __irq_exit_rcu+0x114/0x140 [ 181.993142] irq_exit_rcu+0x14/0x28 [ 181.996816] el1_interrupt+0x44/0xb8 [ 182.000316] el1h_64_irq_handler+0x14/0x20 [ 182.004343] el1h_64_irq+0x80/0x88 [ 182.007755] cpuidle_enter_state+0xc4/0x4a8 (P) [ 182.012305] cpuidle_enter+0x3c/0x58 [ 182.015980] cpuidle_idle_call+0x128/0x1c0 [ 182.020005] do_idle+0xe0/0xf0 [ 182.023155] cpu_startup_entry+0x3c/0x48 [ 182.026917] secondary_start_kernel+0xdc/0x120 [ 182.031379] __secondary_switched+0x74/0x78 [ 212.971162] rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 7-.... } 6103 jiffies s: 417 root: 0x80/. [ 212.985935] rcu: blocking rcu_node structures (internal RCU debug): [ 212.992758] Sending NMI from CPU 0 to CPUs 7: [ 212.998539] NMI backtrace for cpu 7 [ 213.004304] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Kdump: loaded Not tainted 6.13.0-rc3+ #6 [ 213.016116] Hardware name: NVIDIA CTI Forge + Orin AGX/Jetson, BIOS 202402.1-Unknown 10/28/2024 [ 213.030817] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 213.040528] pc : handle_softirqs+0x98/0x368 [ 213.046563] lr : __do_softirq+0x18/0x20 [ 213.051293] sp : ffff80008003bf50 [ 213.055839] x29: ffff80008003bf50 x28: 0000000000000008 x27: 0000000000000000 [ 213.067304] x26: ffffce78ea277000 x25: 0000000000000000 x24: 0000001c61befda0 [ 213.077014] x23: 0000000060400009 x22: ffffce78e99918bc x21: ffff80008018bd70 [ 213.087339] x20: ffffce78e8bb00d8 x19: ffff80008018bc20 x18: 0000000000000000 [ 213.097313] x17: ffff318ebe7d3000 x16: ffff800080038000 x15: 0000000000000000 [ 213.107201] x14: ffff000080816680 x13: ffff318ebe7d3000 x12: 000000003464d91d [ 213.116651] x11: 0000000000000040 x10: ffff000080165a70 x9 : ffffce78e8bb0160 [ 213.127500] x8 : ffff8000827b3160 x7 : 0a37b344852820af x6 : 3f049caedd1ff608 [ 213.138002] x5 : cff7cfdbfaf31291 x4 : ffffce78ea277340 x3 : 00000000ffffde04 [ 213.150428] x2 : 0000000000000101 x1 : ffffce78ea277340 x0 : ffff318ebe7d3000 [ 213.162063] Call trace: [ 213.165494] handle_softirqs+0x98/0x368 (P) [ 213.171256] __do_softirq+0x18/0x20 [ 213.177291] ____do_softirq+0x14/0x28 [ 213.182017] call_on_irq_stack+0x24/0x30 [ 213.186565] do_softirq_own_stack+0x20/0x30 [ 213.191815] __irq_exit_rcu+0x114/0x140 [ 213.196891] irq_exit_rcu+0x14/0x28 [ 213.202401] el1_interrupt+0x44/0xb8 [ 213.207741] el1h_64_irq_handler+0x14/0x20 [ 213.213519] el1h_64_irq+0x80/0x88 [ 213.217541] cpuidle_enter_state+0xc4/0x4a8 (P) [ 213.224364] cpuidle_enter+0x3c/0x58 [ 213.228653] cpuidle_idle_call+0x128/0x1c0 [ 213.233993] do_idle+0xe0/0xf0 [ 213.237928] cpu_startup_entry+0x3c/0x48 [ 213.243791] secondary_start_kernel+0xdc/0x120 [ 213.249830] __secondary_switched+0x74/0x78 This bug has existed since the dwmac-tegra driver was added in Dec 2022 (See Fixes tag below for commit hash). The Tegra234 SOC has 4 MGBE controllers, however Nvidia's Developer Kit only uses MGBE0 which is why the bug was not found previously. Connect Tech has many products that use 2 (or more) MGBE controllers. The solution is to read the controller's SID from the existing "iommus" device tree property. The 2nd field of the "iommus" device tree property is the controller's SID. Device tree snippet from tegra234.dtsi showing MGBE1's "iommus" property: smmu_niso0: iommu@12000000 { compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500"; ... } /* MGBE1 */ ethernet@6900000 { compatible = "nvidia,tegra234-mgbe"; ... iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF1>; ... } Nvidia's arm-smmu driver reads the "iommus" property and stores the SID in the MGBE device's "fwspec" struct. The dwmac-tegra driver can access the SID using the tegra_dev_iommu_get_stream_id() helper function found in linux/iommu.h. Calling tegra_dev_iommu_get_stream_id() should not fail unless the "iommus" property is removed from the device tree or the IOMMU is disabled. While the Tegra234 SOC technically supports bypassing the IOMMU, it is not supported by the current firmware, has not been tested and not recommended. More detailed discussion with Thierry Reding from Nvidia linked below. Fixes: d8ca113 ("net: stmmac: tegra: Add MGBE support") Link: https://lore.kernel.org/netdev/cover.1731685185.git.pnewman@connecttech.com Signed-off-by: Parker Newman <pnewman@connecttech.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://patch.msgid.link/6fb97f32cf4accb4f7cf92846f6b60064ba0a3bd.1736284360.git.pnewman@connecttech.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Hou Tao says: ==================== The use of migrate_{disable|enable} pair in BPF is mainly due to the introduction of bpf memory allocator and the use of per-CPU data struct in its internal implementation. The caller needs to disable migration before invoking the alloc or free APIs of bpf memory allocator, and enable migration after the invocation. The main users of bpf memory allocator are various kind of bpf maps in which the map values or the special fields in the map values are allocated by using bpf memory allocator. At present, the running context for bpf program has already disabled migration explictly or implictly, therefore, when these maps are manipulated in bpf program, it is OK to not invoke migrate_disable() and migrate_enable() pair. Howevers, it is not always the case when these maps are manipulated through bpf syscall, therefore many migrate_{disable|enable} pairs are added when the map can either be manipulated by BPF program or BPF syscall. The initial idea of reducing the use of migrate_{disable|enable} comes from Alexei [1]. I turned it into a patch set that archives the goals through the following three methods: 1. remove unnecessary migrate_{disable|enable} pair when the BPF syscall path also disables migration, it is OK to remove the pair. Patch #1~#3 fall into this category, while patch #4~#5 are partially included. 2. move the migrate_{disable|enable} pair from inner callee to outer caller Instead of invoking migrate_disable() in the inner callee, invoking migrate_disable() in the outer caller to simplify reasoning about when migrate_disable() is needed. Patch #4~#5 and patch #6~#19 belongs to this category. 3. add cant_migrate() check in the inner callee Add cant_migrate() check in the inner callee to ensure the guarantee that migration is disabled is not broken. Patch #1~#5, #13, #16~#19 also belong to this category. Please check the individual patches for more details. Comments are always welcome. Change Log: v2: * sqaush the ->map_free related patches (#10~#12, #15) into one patch * remove unnecessary cant_migrate() checks. v1: https://lore.kernel.org/bpf/20250106081900.1665573-1-houtao@huaweicloud.com ==================== Link: https://patch.msgid.link/20250108010728.207536-1-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

When kernel is built without debuginfo, running 'perf record' with --off-cpu results in segfault as below: ./perf record --off-cpu -e dummy sleep 1 libbpf: kernel BTF is missing at '/sys/kernel/btf/vmlinux', was CONFIG_DEBUG_INFO_BTF enabled? libbpf: failed to find '.BTF' ELF section in /lib/modules/6.13.0-rc3+/build/vmlinux libbpf: failed to find valid kernel BTF Segmentation fault (core dumped) The backtrace pointed to: #0 0x00000000100fb17c in btf.type_cnt () #1 0x00000000100fc1a8 in btf_find_by_name_kind () #2 0x00000000100fc38c in btf.find_by_name_kind () #3 0x00000000102ee3ac in off_cpu_prepare () #4 0x000000001002f78c in cmd_record () #5 0x00000000100aee78 in run_builtin () #6 0x00000000100af3e4 in handle_internal_command () #7 0x000000001001004c in main () Code sequence is: static void check_sched_switch_args(void) { struct btf *btf = btf__load_vmlinux_btf(); const struct btf_type *t1, *t2, *t3; u32 type_id; type_id = btf__find_by_name_kind(btf, "btf_trace_sched_switch", BTF_KIND_TYPEDEF); btf__load_vmlinux_btf() fails when CONFIG_DEBUG_INFO_BTF is not enabled. Here bpf__find_by_name_kind() calls btf__type_cnt() with NULL btf value and results in segfault. To fix this, add a check to see if btf is not NULL before invoking bpf__find_by_name_kind(). Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://lore.kernel.org/r/20241223135813.8175-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

libtraceevent parses and returns an array of argument fields, sometimes larger than RAW_SYSCALL_ARGS_NUM (6) because it includes "__syscall_nr", idx will traverse to index 6 (7th element) whereas sc->fmt->arg holds 6 elements max, creating an out-of-bounds access. This runtime error is found by UBsan. The error message: $ sudo UBSAN_OPTIONS=print_stacktrace=1 ./perf trace -a --max-events=1 builtin-trace.c:1966:35: runtime error: index 6 out of bounds for type 'syscall_arg_fmt [6]' #0 0x5c04956be5fe in syscall__alloc_arg_fmts /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:1966 #1 0x5c04956c0510 in trace__read_syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2110 #2 0x5c04956c372b in trace__syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2436 #3 0x5c04956d2f39 in trace__init_syscalls_bpf_prog_array_maps /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:3897 #4 0x5c04956d6d25 in trace__run /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:4335 #5 0x5c04956e112e in cmd_trace /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:5502 #6 0x5c04956eda7d in run_builtin /home/howard/hw/linux-perf/tools/perf/perf.c:351 #7 0x5c04956ee0a8 in handle_internal_command /home/howard/hw/linux-perf/tools/perf/perf.c:404 #8 0x5c04956ee37f in run_argv /home/howard/hw/linux-perf/tools/perf/perf.c:448 #9 0x5c04956ee8e9 in main /home/howard/hw/linux-perf/tools/perf/perf.c:556 #10 0x79eb3622a3b7 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #11 0x79eb3622a47a in __libc_start_main_impl ../csu/libc-start.c:360 #12 0x5c04955422d4 in _start (/home/howard/hw/linux-perf/tools/perf/perf+0x4e02d4) (BuildId: 5b6cab2d59e96a4341741765ad6914a4d784dbc6) 0.000 ( 0.014 ms): Chrome_ChildIO/117244 write(fd: 238, buf: !, count: 1) = 1 Fixes: 5e58fcf ("perf trace: Allow allocating sc->arg_fmt even without the syscall tracepoint") Signed-off-by: Howard Chu <howardchu95@gmail.com> Link: https://lore.kernel.org/r/20250122025519.361873-1-howardchu95@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

This fixes the following hard lockup in isolate_lru_folios() during memory reclaim. If the LRU mostly contains ineligible folios this may trigger watchdog. watchdog: Watchdog detected hard LOCKUP on cpu 173 RIP: 0010:native_queued_spin_lock_slowpath+0x255/0x2a0 Call Trace: _raw_spin_lock_irqsave+0x31/0x40 folio_lruvec_lock_irqsave+0x5f/0x90 folio_batch_move_lru+0x91/0x150 lru_add_drain_per_cpu+0x1c/0x40 process_one_work+0x17d/0x350 worker_thread+0x27b/0x3a0 kthread+0xe8/0x120 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1b/0x30 lruvec->lru_lock owner： PID: 2865 TASK: ffff888139214d40 CPU: 40 COMMAND: "kswapd0" #0 [fffffe0000945e60] crash_nmi_callback at ffffffffa567a555 #1 [fffffe0000945e68] nmi_handle at ffffffffa563b171 #2 [fffffe0000945eb0] default_do_nmi at ffffffffa6575920 #3 [fffffe0000945ed0] exc_nmi at ffffffffa6575af4 #4 [fffffe0000945ef0] end_repeat_nmi at ffffffffa6601dde [exception RIP: isolate_lru_folios+403] RIP: ffffffffa597df53 RSP: ffffc90006fb7c28 RFLAGS: 00000002 RAX: 0000000000000001 RBX: ffffc90006fb7c60 RCX: ffffea04a2196f88 RDX: ffffc90006fb7c60 RSI: ffffc90006fb7c60 RDI: ffffea04a2197048 RBP: ffff88812cbd3010 R8: ffffea04a2197008 R9: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: ffffea04a2197008 R13: ffffea04a2197048 R14: ffffc90006fb7de8 R15: 0000000003e3e937 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 <NMI exception stack> #5 [ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53 #6 [ffffc90006fb7cf8] shrink_active_list at ffffffffa597f788 #7 [ffffc90006fb7da8] balance_pgdat at ffffffffa5986db0 #8 [ffffc90006fb7ec0] kswapd at ffffffffa5987354 #9 [ffffc90006fb7ef8] kthread at ffffffffa5748238 crash> Scenario: User processe are requesting a large amount of memory and keep page active. Then a module continuously requests memory from ZONE_DMA32 area. Memory reclaim will be triggered due to ZONE_DMA32 watermark alarm reached. However pages in the LRU(active_anon) list are mostly from the ZONE_NORMAL area. Reproduce: Terminal 1: Construct to continuously increase pages active(anon). mkdir /tmp/memory mount -t tmpfs -o size=1024000M tmpfs /tmp/memory dd if=/dev/zero of=/tmp/memory/block bs=4M tail /tmp/memory/block Terminal 2: vmstat -a 1 active will increase. procs ---memory--- ---swap-- ---io---- -system-- ---cpu--- ... r b swpd free inact active si so bi bo 1 0 0 1445623076 45898836 83646008 0 0 0 1 0 0 1445623076 43450228 86094616 0 0 0 1 0 0 1445623076 41003480 88541364 0 0 0 1 0 0 1445623076 38557088 90987756 0 0 0 1 0 0 1445623076 36109688 93435156 0 0 0 1 0 0 1445619552 33663256 95881632 0 0 0 1 0 0 1445619804 31217140 98327792 0 0 0 1 0 0 1445619804 28769988 100774944 0 0 0 1 0 0 1445619804 26322348 103222584 0 0 0 1 0 0 1445619804 23875592 105669340 0 0 0 cat /proc/meminfo | head Active(anon) increase. MemTotal: 1579941036 kB MemFree: 1445618500 kB MemAvailable: 1453013224 kB Buffers: 6516 kB Cached: 128653956 kB SwapCached: 0 kB Active: 118110812 kB Inactive: 11436620 kB Active(anon): 115345744 kB Inactive(anon): 945292 kB When the Active(anon) is 115345744 kB, insmod module triggers the ZONE_DMA32 watermark. perf record -e vmscan:mm_vmscan_lru_isolate -aR perf script isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=2 nr_skipped=2 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=0 nr_skipped=0 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=28835844 nr_skipped=28835844 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=28835844 nr_skipped=28835844 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=29 nr_skipped=29 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=0 nr_skipped=0 nr_taken=0 lru=active_anon See nr_scanned=28835844. 28835844 * 4k = 115343376KB approximately equal to 115345744 kB. If increase Active(anon) to 1000G then insmod module triggers the ZONE_DMA32 watermark. hard lockup will occur. In my device nr_scanned = 0000000003e3e937 when hard lockup. Convert to memory size 0x0000000003e3e937 * 4KB = 261072092 KB. [ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53 ffffc90006fb7c30: 0000000000000020 0000000000000000 ffffc90006fb7c40: ffffc90006fb7d40 ffff88812cbd3000 ffffc90006fb7c50: ffffc90006fb7d30 0000000106fb7de8 ffffc90006fb7c60: ffffea04a2197008 ffffea0006ed4a48 ffffc90006fb7c70: 0000000000000000 0000000000000000 ffffc90006fb7c80: 0000000000000000 0000000000000000 ffffc90006fb7c90: 0000000000000000 0000000000000000 ffffc90006fb7ca0: 0000000000000000 0000000003e3e937 ffffc90006fb7cb0: 0000000000000000 0000000000000000 ffffc90006fb7cc0: 8d7c0b56b7874b00 ffff88812cbd3000 About the Fixes: Why did it take eight years to be discovered? The problem requires the following conditions to occur: 1. The device memory should be large enough. 2. Pages in the LRU(active_anon) list are mostly from the ZONE_NORMAL area. 3. The memory in ZONE_DMA32 needs to reach the watermark. If the memory is not large enough, or if the usage design of ZONE_DMA32 area memory is reasonable, this problem is difficult to detect. notes: The problem is most likely to occur in ZONE_DMA32 and ZONE_NORMAL, but other suitable scenarios may also trigger the problem. Link: https://lkml.kernel.org/r/20241119060842.274072-1-liuye@kylinos.cn Fixes: b2e1875 ("mm, vmscan: begin reclaiming pages on a per-node basis") Signed-off-by: liuye <liuye@kylinos.cn> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yang Shi <yang@os.amperecomputing.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When COWing a relocation tree path, at relocation.c:replace_path(), we can trigger a lockdep splat while we are in the btrfs_search_slot() call against the relocation root. This happens in that callchain at ctree.c:read_block_for_search() when we happen to find a child extent buffer already loaded through the fs tree with a lockdep class set to the fs tree. So when we attempt to lock that extent buffer through a relocation tree we have to reset the lockdep class to the class for a relocation tree, since a relocation tree has extent buffers that used to belong to a fs tree and may currently be already loaded (we swap extent buffers between the two trees at the end of replace_path()). However we are missing calls to btrfs_maybe_reset_lockdep_class() to reset the lockdep class at ctree.c:read_block_for_search() before we read lock an extent buffer, just like we did for btrfs_search_slot() in commit b40130b ("btrfs: fix lockdep splat with reloc root extent buffers"). So add the missing btrfs_maybe_reset_lockdep_class() calls before the attempts to read lock an extent buffer at ctree.c:read_block_for_search(). The lockdep splat was reported by syzbot and it looks like this: ====================================================== WARNING: possible circular locking dependency detected 6.13.0-rc5-syzkaller-00163-gab75170520d4 #0 Not tainted ------------------------------------------------------ syz.0.0/5335 is trying to acquire lock: ffff8880545dbc38 (btrfs-tree-01){++++}-{4:4}, at: btrfs_tree_read_lock_nested+0x2f/0x250 fs/btrfs/locking.c:146 but task is already holding lock: ffff8880545dba58 (btrfs-treloc-02/1){+.+.}-{4:4}, at: btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (btrfs-treloc-02/1){+.+.}-{4:4}: reacquire_held_locks+0x3eb/0x690 kernel/locking/lockdep.c:5374 __lock_release kernel/locking/lockdep.c:5563 [inline] lock_release+0x396/0xa30 kernel/locking/lockdep.c:5870 up_write+0x79/0x590 kernel/locking/rwsem.c:1629 btrfs_force_cow_block+0x14b3/0x1fd0 fs/btrfs/ctree.c:660 btrfs_cow_block+0x371/0x830 fs/btrfs/ctree.c:755 btrfs_search_slot+0xc01/0x3180 fs/btrfs/ctree.c:2153 replace_path+0x1243/0x2740 fs/btrfs/relocation.c:1224 merge_reloc_root+0xc46/0x1ad0 fs/btrfs/relocation.c:1692 merge_reloc_roots+0x3b3/0x980 fs/btrfs/relocation.c:1942 relocate_block_group+0xb0a/0xd40 fs/btrfs/relocation.c:3754 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4087 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3494 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4278 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4655 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3670 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #1 (btrfs-tree-01/1){+.+.}-{4:4}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 down_write_nested+0xa2/0x220 kernel/locking/rwsem.c:1693 btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 btrfs_init_new_buffer fs/btrfs/extent-tree.c:5052 [inline] btrfs_alloc_tree_block+0x41c/0x1440 fs/btrfs/extent-tree.c:5132 btrfs_force_cow_block+0x526/0x1fd0 fs/btrfs/ctree.c:573 btrfs_cow_block+0x371/0x830 fs/btrfs/ctree.c:755 btrfs_search_slot+0xc01/0x3180 fs/btrfs/ctree.c:2153 btrfs_insert_empty_items+0x9c/0x1a0 fs/btrfs/ctree.c:4351 btrfs_insert_empty_item fs/btrfs/ctree.h:688 [inline] btrfs_insert_inode_ref+0x2bb/0xf80 fs/btrfs/inode-item.c:330 btrfs_rename_exchange fs/btrfs/inode.c:7990 [inline] btrfs_rename2+0xcb7/0x2b90 fs/btrfs/inode.c:8374 vfs_rename+0xbdb/0xf00 fs/namei.c:5067 do_renameat2+0xd94/0x13f0 fs/namei.c:5224 __do_sys_renameat2 fs/namei.c:5258 [inline] __se_sys_renameat2 fs/namei.c:5255 [inline] __x64_sys_renameat2+0xce/0xe0 fs/namei.c:5255 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (btrfs-tree-01){++++}-{4:4}: check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/locking/lockdep.c:3280 [inline] validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904 __lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 down_read_nested+0xb5/0xa50 kernel/locking/rwsem.c:1649 btrfs_tree_read_lock_nested+0x2f/0x250 fs/btrfs/locking.c:146 btrfs_tree_read_lock fs/btrfs/locking.h:188 [inline] read_block_for_search+0x718/0xbb0 fs/btrfs/ctree.c:1610 btrfs_search_slot+0x1274/0x3180 fs/btrfs/ctree.c:2237 replace_path+0x1243/0x2740 fs/btrfs/relocation.c:1224 merge_reloc_root+0xc46/0x1ad0 fs/btrfs/relocation.c:1692 merge_reloc_roots+0x3b3/0x980 fs/btrfs/relocation.c:1942 relocate_block_group+0xb0a/0xd40 fs/btrfs/relocation.c:3754 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4087 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3494 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4278 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4655 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3670 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Chain exists of: btrfs-tree-01 --> btrfs-tree-01/1 --> btrfs-treloc-02/1 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-treloc-02/1); lock(btrfs-tree-01/1); lock(btrfs-treloc-02/1); rlock(btrfs-tree-01); *** DEADLOCK *** 8 locks held by syz.0.0/5335: #0: ffff88801e3ae420 (sb_writers#13){.+.+}-{0:0}, at: mnt_want_write_file+0x5e/0x200 fs/namespace.c:559 #1: ffff888052c760d0 (&fs_info->reclaim_bgs_lock){+.+.}-{4:4}, at: __btrfs_balance+0x4c2/0x26b0 fs/btrfs/volumes.c:4183 #2: ffff888052c74850 (&fs_info->cleaner_mutex){+.+.}-{4:4}, at: btrfs_relocate_block_group+0x775/0xd90 fs/btrfs/relocation.c:4086 #3: ffff88801e3ae610 (sb_internal#2){.+.+}-{0:0}, at: merge_reloc_root+0xf11/0x1ad0 fs/btrfs/relocation.c:1659 #4: ffff888052c76470 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0x405/0xda0 fs/btrfs/transaction.c:288 #5: ffff888052c76498 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0x405/0xda0 fs/btrfs/transaction.c:288 #6: ffff8880545db878 (btrfs-tree-01/1){+.+.}-{4:4}, at: btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 #7: ffff8880545dba58 (btrfs-treloc-02/1){+.+.}-{4:4}, at: btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 stack backtrace: CPU: 0 UID: 0 PID: 5335 Comm: syz.0.0 Not tainted 6.13.0-rc5-syzkaller-00163-gab75170520d4 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_circular_bug+0x13a/0x1b0 kernel/locking/lockdep.c:2074 check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2206 check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/locking/lockdep.c:3280 [inline] validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904 __lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 down_read_nested+0xb5/0xa50 kernel/locking/rwsem.c:1649 btrfs_tree_read_lock_nested+0x2f/0x250 fs/btrfs/locking.c:146 btrfs_tree_read_lock fs/btrfs/locking.h:188 [inline] read_block_for_search+0x718/0xbb0 fs/btrfs/ctree.c:1610 btrfs_search_slot+0x1274/0x3180 fs/btrfs/ctree.c:2237 replace_path+0x1243/0x2740 fs/btrfs/relocation.c:1224 merge_reloc_root+0xc46/0x1ad0 fs/btrfs/relocation.c:1692 merge_reloc_roots+0x3b3/0x980 fs/btrfs/relocation.c:1942 relocate_block_group+0xb0a/0xd40 fs/btrfs/relocation.c:3754 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4087 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3494 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4278 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4655 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3670 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f1ac6985d29 Code: ff ff c3 (...) RSP: 002b:00007f1ac63fe038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f1ac6b76160 RCX: 00007f1ac6985d29 RDX: 0000000020000180 RSI: 00000000c4009420 RDI: 0000000000000007 RBP: 00007f1ac6a01b08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000001 R14: 00007f1ac6b76160 R15: 00007fffda145a88 </TASK> Reported-by: syzbot+63913e558c084f7f8fdc@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/677b3014.050a0220.3b53b0.0064.GAE@google.com/ Fixes: 9978599 ("btrfs: reduce lock contention when eb cache miss for btree search") Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

We have several places across the kernel where we want to access another task's syscall arguments, such as ptrace(2), seccomp(2), etc., by making a call to syscall_get_arguments(). This works for register arguments right away by accessing the task's `regs' member of `struct pt_regs', however for stack arguments seen with 32-bit/o32 kernels things are more complicated. Technically they ought to be obtained from the user stack with calls to an access_remote_vm(), but we have an easier way available already. So as to be able to access syscall stack arguments as regular function arguments following the MIPS calling convention we copy them over from the user stack to the kernel stack in arch/mips/kernel/scall32-o32.S, in handle_sys(), to the current stack frame's outgoing argument space at the top of the stack, which is where the handler called expects to see its incoming arguments. This area is also pointed at by the `pt_regs' pointer obtained by task_pt_regs(). Make the o32 stack argument space a proper member of `struct pt_regs' then, by renaming the existing member from `pad0' to `args' and using generated offsets to access the space. No functional change though. With the change in place the o32 kernel stack frame layout at the entry to a syscall handler invoked by handle_sys() is therefore as follows: $sp + 68 -> | ... | <- pt_regs.regs[9] +---------------------+ $sp + 64 -> | $t0 | <- pt_regs.regs[8] +---------------------+ $sp + 60 -> | $a3/argument #4 | <- pt_regs.regs[7] +---------------------+ $sp + 56 -> | $a2/argument #3 | <- pt_regs.regs[6] +---------------------+ $sp + 52 -> | $a1/argument #2 | <- pt_regs.regs[5] +---------------------+ $sp + 48 -> | $a0/argument #1 | <- pt_regs.regs[4] +---------------------+ $sp + 44 -> | $v1 | <- pt_regs.regs[3] +---------------------+ $sp + 40 -> | $v0 | <- pt_regs.regs[2] +---------------------+ $sp + 36 -> | $at | <- pt_regs.regs[1] +---------------------+ $sp + 32 -> | $zero | <- pt_regs.regs[0] +---------------------+ $sp + 28 -> | stack argument #8 | <- pt_regs.args[7] +---------------------+ $sp + 24 -> | stack argument #7 | <- pt_regs.args[6] +---------------------+ $sp + 20 -> | stack argument #6 | <- pt_regs.args[5] +---------------------+ $sp + 16 -> | stack argument #5 | <- pt_regs.args[4] +---------------------+ $sp + 12 -> | psABI space for $a3 | <- pt_regs.args[3] +---------------------+ $sp + 8 -> | psABI space for $a2 | <- pt_regs.args[2] +---------------------+ $sp + 4 -> | psABI space for $a1 | <- pt_regs.args[1] +---------------------+ $sp + 0 -> | psABI space for $a0 | <- pt_regs.args[0] +---------------------+ holding user data received and with the first 4 frame slots reserved by the psABI for the compiler to spill the incoming arguments from $a0-$a3 registers (which it sometimes does according to its needs) and the next 4 frame slots designated by the psABI for any stack function arguments that follow. This data is also available for other tasks to peek/poke at as reqired and where permitted. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

This makes ptrace/get_syscall_info selftest pass on mips o32 and mips64 o32 by fixing the following two test assertions: 1. get_syscall_info test assertion on mips o32: # get_syscall_info.c:218:get_syscall_info:Expected exp_args[5] (3134521044) == info.entry.args[4] (4911432) # get_syscall_info.c:219:get_syscall_info:wait #1: entry stop mismatch 2. get_syscall_info test assertion on mips64 o32: # get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (18446744072548908753) # get_syscall_info.c:210:get_syscall_info:wait #1: entry stop mismatch The first assertion happens due to mips_get_syscall_arg() trying to access another task's context but failing to do it properly because get_user() it calls just peeks at the current task's context. It usually does not crash because the default user stack always gets assigned the same VMA, but it is pure luck which mips_get_syscall_arg() wouldn't have if e.g. the stack was switched (via setcontext(3) or however) or a non-default process's thread peeked at, and in any case irrelevant data is obtained just as observed with the test case. mips_get_syscall_arg() ought to be using access_remote_vm() instead to retrieve the other task's stack contents, but given that the data has been already obtained and saved in `struct pt_regs' it would be an overkill. The first assertion is fixed for mips o32 by using struct pt_regs.args instead of get_user() to obtain syscall arguments. This approach works due to this piece in arch/mips/kernel/scall32-o32.S: /* * Ok, copy the args from the luser stack to the kernel stack. */ .set push .set noreorder .set nomacro load_a4: user_lw(t5, 16(t0)) # argument #5 from usp load_a5: user_lw(t6, 20(t0)) # argument #6 from usp load_a6: user_lw(t7, 24(t0)) # argument #7 from usp load_a7: user_lw(t8, 28(t0)) # argument #8 from usp loads_done: sw t5, PT_ARG4(sp) # argument #5 to ksp sw t6, PT_ARG5(sp) # argument #6 to ksp sw t7, PT_ARG6(sp) # argument #7 to ksp sw t8, PT_ARG7(sp) # argument #8 to ksp .set pop .section __ex_table,"a" PTR_WD load_a4, bad_stack_a4 PTR_WD load_a5, bad_stack_a5 PTR_WD load_a6, bad_stack_a6 PTR_WD load_a7, bad_stack_a7 .previous arch/mips/kernel/scall64-o32.S has analogous code for mips64 o32 that allows fixing the issue by obtaining syscall arguments from struct pt_regs.regs[4..11] instead of the erroneous use of get_user(). The second assertion is fixed by truncating 64-bit values to 32-bit syscall arguments. Fixes: c0ff3c5 ("MIPS: Enable HAVE_ARCH_TRACEHOOK.") Signed-off-by: Dmitry V. Levin <ldv@strace.io> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

In recent kernels, there are lockdep splats around the struct request_queue::io_lockdep_map, similar to [1], but they typically don't show up until reclaim with writeback happens. Having multiple kernel versions released with a known risc of kernel deadlock during reclaim writeback should IMHO be addressed and backported to -stable with the highest priority. In order to have these lockdep splats show up earlier, preferrably during system initialization, prime the struct request_queue::io_lockdep_map as GFP_KERNEL reclaim- tainted. This will instead lead to lockdep splats looking similar to [2], but without the need for reclaim + writeback happening. [1]: [ 189.762244] ====================================================== [ 189.762432] WARNING: possible circular locking dependency detected [ 189.762441] 6.14.0-rc6-xe+ #6 Tainted: G U [ 189.762450] ------------------------------------------------------ [ 189.762459] kswapd0/119 is trying to acquire lock: [ 189.762467] ffff888110ceb710 (&q->q_usage_counter(io)#26){++++}-{0:0}, at: __submit_bio+0x76/0x230 [ 189.762485] but task is already holding lock: [ 189.762494] ffffffff834c97c0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0xbe/0xb00 [ 189.762507] which lock already depends on the new lock. [ 189.762519] the existing dependency chain (in reverse order) is: [ 189.762529] -> #2 (fs_reclaim){+.+.}-{0:0}: [ 189.762540] fs_reclaim_acquire+0xc5/0x100 [ 189.762548] kmem_cache_alloc_lru_noprof+0x4a/0x480 [ 189.762558] alloc_inode+0xaa/0xe0 [ 189.762566] iget_locked+0x157/0x330 [ 189.762573] kernfs_get_inode+0x1b/0x110 [ 189.762582] kernfs_get_tree+0x1b0/0x2e0 [ 189.762590] sysfs_get_tree+0x1f/0x60 [ 189.762597] vfs_get_tree+0x2a/0xf0 [ 189.762605] path_mount+0x4cd/0xc00 [ 189.762613] __x64_sys_mount+0x119/0x150 [ 189.762621] x64_sys_call+0x14f2/0x2310 [ 189.762630] do_syscall_64+0x91/0x180 [ 189.762637] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 189.762647] -> #1 (&root->kernfs_rwsem){++++}-{3:3}: [ 189.762659] down_write+0x3e/0xf0 [ 189.762667] kernfs_remove+0x32/0x60 [ 189.762676] sysfs_remove_dir+0x4f/0x60 [ 189.762685] __kobject_del+0x33/0xa0 [ 189.762709] kobject_del+0x13/0x30 [ 189.762716] elv_unregister_queue+0x52/0x80 [ 189.762725] elevator_switch+0x68/0x360 [ 189.762733] elv_iosched_store+0x14b/0x1b0 [ 189.762756] queue_attr_store+0x181/0x1e0 [ 189.762765] sysfs_kf_write+0x49/0x80 [ 189.762773] kernfs_fop_write_iter+0x17d/0x250 [ 189.762781] vfs_write+0x281/0x540 [ 189.762790] ksys_write+0x72/0xf0 [ 189.762798] __x64_sys_write+0x19/0x30 [ 189.762807] x64_sys_call+0x2a3/0x2310 [ 189.762815] do_syscall_64+0x91/0x180 [ 189.762823] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 189.762833] -> #0 (&q->q_usage_counter(io)#26){++++}-{0:0}: [ 189.762845] __lock_acquire+0x1525/0x2760 [ 189.762854] lock_acquire+0xca/0x310 [ 189.762861] blk_mq_submit_bio+0x8a2/0xba0 [ 189.762870] __submit_bio+0x76/0x230 [ 189.762878] submit_bio_noacct_nocheck+0x323/0x430 [ 189.762888] submit_bio_noacct+0x2cc/0x620 [ 189.762896] submit_bio+0x38/0x110 [ 189.762904] __swap_writepage+0xf5/0x380 [ 189.762912] swap_writepage+0x3c7/0x600 [ 189.762920] shmem_writepage+0x3da/0x4f0 [ 189.762929] pageout+0x13f/0x310 [ 189.762937] shrink_folio_list+0x61c/0xf60 [ 189.763261] evict_folios+0x378/0xcd0 [ 189.763584] try_to_shrink_lruvec+0x1b0/0x360 [ 189.763946] shrink_one+0x10e/0x200 [ 189.764266] shrink_node+0xc02/0x1490 [ 189.764586] balance_pgdat+0x563/0xb00 [ 189.764934] kswapd+0x1e8/0x430 [ 189.765249] kthread+0x10b/0x260 [ 189.765559] ret_from_fork+0x44/0x70 [ 189.765889] ret_from_fork_asm+0x1a/0x30 [ 189.766198] other info that might help us debug this: [ 189.767089] Chain exists of: &q->q_usage_counter(io)#26 --> &root->kernfs_rwsem --> fs_reclaim [ 189.767971] Possible unsafe locking scenario: [ 189.768555] CPU0 CPU1 [ 189.768849] ---- ---- [ 189.769136] lock(fs_reclaim); [ 189.769421] lock(&root->kernfs_rwsem); [ 189.769714] lock(fs_reclaim); [ 189.770016] rlock(&q->q_usage_counter(io)#26); [ 189.770305] *** DEADLOCK *** [ 189.771167] 1 lock held by kswapd0/119: [ 189.771453] #0: ffffffff834c97c0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0xbe/0xb00 [ 189.771770] stack backtrace: [ 189.772351] CPU: 4 UID: 0 PID: 119 Comm: kswapd0 Tainted: G U 6.14.0-rc6-xe+ #6 [ 189.772353] Tainted: [U]=USER [ 189.772354] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023 [ 189.772354] Call Trace: [ 189.772355] <TASK> [ 189.772356] dump_stack_lvl+0x6e/0xa0 [ 189.772359] dump_stack+0x10/0x18 [ 189.772360] print_circular_bug.cold+0x17a/0x1b7 [ 189.772363] check_noncircular+0x13a/0x150 [ 189.772365] ? __pfx_stack_trace_consume_entry+0x10/0x10 [ 189.772368] __lock_acquire+0x1525/0x2760 [ 189.772368] ? ret_from_fork_asm+0x1a/0x30 [ 189.772371] lock_acquire+0xca/0x310 [ 189.772372] ? __submit_bio+0x76/0x230 [ 189.772375] ? lock_release+0xd5/0x2c0 [ 189.772376] blk_mq_submit_bio+0x8a2/0xba0 [ 189.772378] ? __submit_bio+0x76/0x230 [ 189.772380] __submit_bio+0x76/0x230 [ 189.772382] ? trace_hardirqs_on+0x1e/0xe0 [ 189.772384] submit_bio_noacct_nocheck+0x323/0x430 [ 189.772386] ? submit_bio_noacct_nocheck+0x323/0x430 [ 189.772387] ? __might_sleep+0x58/0xa0 [ 189.772390] submit_bio_noacct+0x2cc/0x620 [ 189.772391] ? count_memcg_events+0x68/0x90 [ 189.772393] submit_bio+0x38/0x110 [ 189.772395] __swap_writepage+0xf5/0x380 [ 189.772396] swap_writepage+0x3c7/0x600 [ 189.772397] shmem_writepage+0x3da/0x4f0 [ 189.772401] pageout+0x13f/0x310 [ 189.772406] shrink_folio_list+0x61c/0xf60 [ 189.772409] ? isolate_folios+0xe80/0x16b0 [ 189.772410] ? mark_held_locks+0x46/0x90 [ 189.772412] evict_folios+0x378/0xcd0 [ 189.772414] ? evict_folios+0x34a/0xcd0 [ 189.772415] ? lock_is_held_type+0xa3/0x130 [ 189.772417] try_to_shrink_lruvec+0x1b0/0x360 [ 189.772420] shrink_one+0x10e/0x200 [ 189.772421] shrink_node+0xc02/0x1490 [ 189.772423] ? shrink_node+0xa08/0x1490 [ 189.772424] ? shrink_node+0xbd8/0x1490 [ 189.772425] ? mem_cgroup_iter+0x366/0x480 [ 189.772427] balance_pgdat+0x563/0xb00 [ 189.772428] ? balance_pgdat+0x563/0xb00 [ 189.772430] ? trace_hardirqs_on+0x1e/0xe0 [ 189.772431] ? finish_task_switch.isra.0+0xcb/0x330 [ 189.772433] ? __switch_to_asm+0x33/0x70 [ 189.772437] kswapd+0x1e8/0x430 [ 189.772438] ? __pfx_autoremove_wake_function+0x10/0x10 [ 189.772440] ? __pfx_kswapd+0x10/0x10 [ 189.772441] kthread+0x10b/0x260 [ 189.772443] ? __pfx_kthread+0x10/0x10 [ 189.772444] ret_from_fork+0x44/0x70 [ 189.772446] ? __pfx_kthread+0x10/0x10 [ 189.772447] ret_from_fork_asm+0x1a/0x30 [ 189.772450] </TASK> [2]: [ 8.760253] ====================================================== [ 8.760254] WARNING: possible circular locking dependency detected [ 8.760255] 6.14.0-rc6-xe+ #7 Tainted: G U [ 8.760256] ------------------------------------------------------ [ 8.760257] (udev-worker)/674 is trying to acquire lock: [ 8.760259] ffff888100e39148 (&root->kernfs_rwsem){++++}-{3:3}, at: kernfs_remove+0x32/0x60 [ 8.760265] but task is already holding lock: [ 8.760266] ffff888110dc7680 (&q->q_usage_counter(io)#27){++++}-{0:0}, at: blk_mq_freeze_queue_nomemsave+0x12/0x30 [ 8.760272] which lock already depends on the new lock. [ 8.760272] the existing dependency chain (in reverse order) is: [ 8.760273] -> #2 (&q->q_usage_counter(io)#27){++++}-{0:0}: [ 8.760276] blk_alloc_queue+0x30a/0x350 [ 8.760279] blk_mq_alloc_queue+0x6b/0xe0 [ 8.760281] scsi_alloc_sdev+0x276/0x3c0 [ 8.760284] scsi_probe_and_add_lun+0x22a/0x440 [ 8.760286] __scsi_scan_target+0x109/0x230 [ 8.760288] scsi_scan_channel+0x65/0xc0 [ 8.760290] scsi_scan_host_selected+0xff/0x140 [ 8.760292] do_scsi_scan_host+0xa7/0xc0 [ 8.760293] do_scan_async+0x1c/0x160 [ 8.760295] async_run_entry_fn+0x32/0x150 [ 8.760299] process_one_work+0x224/0x5f0 [ 8.760302] worker_thread+0x1d4/0x3e0 [ 8.760304] kthread+0x10b/0x260 [ 8.760306] ret_from_fork+0x44/0x70 [ 8.760309] ret_from_fork_asm+0x1a/0x30 [ 8.760312] -> #1 (fs_reclaim){+.+.}-{0:0}: [ 8.760315] fs_reclaim_acquire+0xc5/0x100 [ 8.760317] kmem_cache_alloc_lru_noprof+0x4a/0x480 [ 8.760319] alloc_inode+0xaa/0xe0 [ 8.760322] iget_locked+0x157/0x330 [ 8.760323] kernfs_get_inode+0x1b/0x110 [ 8.760325] kernfs_get_tree+0x1b0/0x2e0 [ 8.760327] sysfs_get_tree+0x1f/0x60 [ 8.760329] vfs_get_tree+0x2a/0xf0 [ 8.760332] path_mount+0x4cd/0xc00 [ 8.760334] __x64_sys_mount+0x119/0x150 [ 8.760336] x64_sys_call+0x14f2/0x2310 [ 8.760338] do_syscall_64+0x91/0x180 [ 8.760340] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 8.760342] -> #0 (&root->kernfs_rwsem){++++}-{3:3}: [ 8.760345] __lock_acquire+0x1525/0x2760 [ 8.760347] lock_acquire+0xca/0x310 [ 8.760348] down_write+0x3e/0xf0 [ 8.760350] kernfs_remove+0x32/0x60 [ 8.760351] sysfs_remove_dir+0x4f/0x60 [ 8.760353] __kobject_del+0x33/0xa0 [ 8.760355] kobject_del+0x13/0x30 [ 8.760356] elv_unregister_queue+0x52/0x80 [ 8.760358] elevator_switch+0x68/0x360 [ 8.760360] elv_iosched_store+0x14b/0x1b0 [ 8.760362] queue_attr_store+0x181/0x1e0 [ 8.760364] sysfs_kf_write+0x49/0x80 [ 8.760366] kernfs_fop_write_iter+0x17d/0x250 [ 8.760367] vfs_write+0x281/0x540 [ 8.760370] ksys_write+0x72/0xf0 [ 8.760372] __x64_sys_write+0x19/0x30 [ 8.760374] x64_sys_call+0x2a3/0x2310 [ 8.760376] do_syscall_64+0x91/0x180 [ 8.760377] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 8.760380] other info that might help us debug this: [ 8.760380] Chain exists of: &root->kernfs_rwsem --> fs_reclaim --> &q->q_usage_counter(io)#27 [ 8.760384] Possible unsafe locking scenario: [ 8.760384] CPU0 CPU1 [ 8.760385] ---- ---- [ 8.760385] lock(&q->q_usage_counter(io)#27); [ 8.760387] lock(fs_reclaim); [ 8.760388] lock(&q->q_usage_counter(io)#27); [ 8.760390] lock(&root->kernfs_rwsem); [ 8.760391] *** DEADLOCK *** [ 8.760391] 6 locks held by (udev-worker)/674: [ 8.760392] #0: ffff8881209ac420 (sb_writers#4){.+.+}-{0:0}, at: ksys_write+0x72/0xf0 [ 8.760398] #1: ffff88810c80f488 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x136/0x250 [ 8.760402] #2: ffff888125d1d330 (kn->active#101){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x13f/0x250 [ 8.760406] #3: ffff888110dc7bb0 (&q->sysfs_lock){+.+.}-{3:3}, at: queue_attr_store+0x148/0x1e0 [ 8.760411] #4: ffff888110dc7680 (&q->q_usage_counter(io)#27){++++}-{0:0}, at: blk_mq_freeze_queue_nomemsave+0x12/0x30 [ 8.760416] #5: ffff888110dc76b8 (&q->q_usage_counter(queue)#27){++++}-{0:0}, at: blk_mq_freeze_queue_nomemsave+0x12/0x30 [ 8.760421] stack backtrace: [ 8.760422] CPU: 7 UID: 0 PID: 674 Comm: (udev-worker) Tainted: G U 6.14.0-rc6-xe+ #7 [ 8.760424] Tainted: [U]=USER [ 8.760425] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023 [ 8.760426] Call Trace: [ 8.760427] <TASK> [ 8.760428] dump_stack_lvl+0x6e/0xa0 [ 8.760431] dump_stack+0x10/0x18 [ 8.760433] print_circular_bug.cold+0x17a/0x1b7 [ 8.760437] check_noncircular+0x13a/0x150 [ 8.760441] ? save_trace+0x54/0x360 [ 8.760445] __lock_acquire+0x1525/0x2760 [ 8.760446] ? irqentry_exit+0x3a/0xb0 [ 8.760448] ? sysvec_apic_timer_interrupt+0x57/0xc0 [ 8.760452] lock_acquire+0xca/0x310 [ 8.760453] ? kernfs_remove+0x32/0x60 [ 8.760457] down_write+0x3e/0xf0 [ 8.760459] ? kernfs_remove+0x32/0x60 [ 8.760460] kernfs_remove+0x32/0x60 [ 8.760462] sysfs_remove_dir+0x4f/0x60 [ 8.760464] __kobject_del+0x33/0xa0 [ 8.760466] kobject_del+0x13/0x30 [ 8.760467] elv_unregister_queue+0x52/0x80 [ 8.760470] elevator_switch+0x68/0x360 [ 8.760472] elv_iosched_store+0x14b/0x1b0 [ 8.760475] queue_attr_store+0x181/0x1e0 [ 8.760479] ? lock_acquire+0xca/0x310 [ 8.760480] ? kernfs_fop_write_iter+0x13f/0x250 [ 8.760482] ? lock_is_held_type+0xa3/0x130 [ 8.760485] sysfs_kf_write+0x49/0x80 [ 8.760487] kernfs_fop_write_iter+0x17d/0x250 [ 8.760489] vfs_write+0x281/0x540 [ 8.760494] ksys_write+0x72/0xf0 [ 8.760497] __x64_sys_write+0x19/0x30 [ 8.760499] x64_sys_call+0x2a3/0x2310 [ 8.760502] do_syscall_64+0x91/0x180 [ 8.760504] ? trace_hardirqs_off+0x5d/0xe0 [ 8.760506] ? handle_softirqs+0x479/0x4d0 [ 8.760508] ? hrtimer_interrupt+0x13f/0x280 [ 8.760511] ? irqentry_exit_to_user_mode+0x8b/0x260 [ 8.760513] ? clear_bhb_loop+0x15/0x70 [ 8.760515] ? clear_bhb_loop+0x15/0x70 [ 8.760516] ? clear_bhb_loop+0x15/0x70 [ 8.760518] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 8.760520] RIP: 0033:0x7aa3bf2f5504 [ 8.760522] Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d c5 8b 10 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 [ 8.760523] RSP: 002b:00007ffc1e3697d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ 8.760526] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007aa3bf2f5504 [ 8.760527] RDX: 0000000000000003 RSI: 00007ffc1e369ae0 RDI: 000000000000001c [ 8.760528] RBP: 00007ffc1e369800 R08: 00007aa3bf3f51c8 R09: 00007ffc1e3698b0 [ 8.760528] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000003 [ 8.760529] R13: 00007ffc1e369ae0 R14: 0000613ccf21f2f0 R15: 00007aa3bf3f4e80 [ 8.760533] </TASK> v2: - Update a code comment to increase readability (Ming Lei). Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250318095548.5187-1-thomas.hellstrom@linux.intel.com Signed-off-by: Jens Axboe <axboe@kernel.dk>

We have recently seen report of lockdep circular lock dependency warnings on platforms like Skylake and Kabylake: ====================================================== WARNING: possible circular locking dependency detected 6.14.0-rc6-CI_DRM_16276-gca2c04fe76e8+ #1 Not tainted ------------------------------------------------------ swapper/0/1 is trying to acquire lock: ffffffff8360ee48 (iommu_probe_device_lock){+.+.}-{3:3}, at: iommu_probe_device+0x1d/0x70 but task is already holding lock: ffff888102c7efa8 (&device->physical_node_lock){+.+.}-{3:3}, at: intel_iommu_init+0xe75/0x11f0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #6 (&device->physical_node_lock){+.+.}-{3:3}: __mutex_lock+0xb4/0xe40 mutex_lock_nested+0x1b/0x30 intel_iommu_init+0xe75/0x11f0 pci_iommu_init+0x13/0x70 do_one_initcall+0x62/0x3f0 kernel_init_freeable+0x3da/0x6a0 kernel_init+0x1b/0x200 ret_from_fork+0x44/0x70 ret_from_fork_asm+0x1a/0x30 -> #5 (dmar_global_lock){++++}-{3:3}: down_read+0x43/0x1d0 enable_drhd_fault_handling+0x21/0x110 cpuhp_invoke_callback+0x4c6/0x870 cpuhp_issue_call+0xbf/0x1f0 __cpuhp_setup_state_cpuslocked+0x111/0x320 __cpuhp_setup_state+0xb0/0x220 irq_remap_enable_fault_handling+0x3f/0xa0 apic_intr_mode_init+0x5c/0x110 x86_late_time_init+0x24/0x40 start_kernel+0x895/0xbd0 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0xbf/0x110 common_startup_64+0x13e/0x141 -> #4 (cpuhp_state_mutex){+.+.}-{3:3}: __mutex_lock+0xb4/0xe40 mutex_lock_nested+0x1b/0x30 __cpuhp_setup_state_cpuslocked+0x67/0x320 __cpuhp_setup_state+0xb0/0x220 page_alloc_init_cpuhp+0x2d/0x60 mm_core_init+0x18/0x2c0 start_kernel+0x576/0xbd0 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0xbf/0x110 common_startup_64+0x13e/0x141 -> #3 (cpu_hotplug_lock){++++}-{0:0}: __cpuhp_state_add_instance+0x4f/0x220 iova_domain_init_rcaches+0x214/0x280 iommu_setup_dma_ops+0x1a4/0x710 iommu_device_register+0x17d/0x260 intel_iommu_init+0xda4/0x11f0 pci_iommu_init+0x13/0x70 do_one_initcall+0x62/0x3f0 kernel_init_freeable+0x3da/0x6a0 kernel_init+0x1b/0x200 ret_from_fork+0x44/0x70 ret_from_fork_asm+0x1a/0x30 -> #2 (&domain->iova_cookie->mutex){+.+.}-{3:3}: __mutex_lock+0xb4/0xe40 mutex_lock_nested+0x1b/0x30 iommu_setup_dma_ops+0x16b/0x710 iommu_device_register+0x17d/0x260 intel_iommu_init+0xda4/0x11f0 pci_iommu_init+0x13/0x70 do_one_initcall+0x62/0x3f0 kernel_init_freeable+0x3da/0x6a0 kernel_init+0x1b/0x200 ret_from_fork+0x44/0x70 ret_from_fork_asm+0x1a/0x30 -> #1 (&group->mutex){+.+.}-{3:3}: __mutex_lock+0xb4/0xe40 mutex_lock_nested+0x1b/0x30 __iommu_probe_device+0x24c/0x4e0 probe_iommu_group+0x2b/0x50 bus_for_each_dev+0x7d/0xe0 iommu_device_register+0xe1/0x260 intel_iommu_init+0xda4/0x11f0 pci_iommu_init+0x13/0x70 do_one_initcall+0x62/0x3f0 kernel_init_freeable+0x3da/0x6a0 kernel_init+0x1b/0x200 ret_from_fork+0x44/0x70 ret_from_fork_asm+0x1a/0x30 -> #0 (iommu_probe_device_lock){+.+.}-{3:3}: __lock_acquire+0x1637/0x2810 lock_acquire+0xc9/0x300 __mutex_lock+0xb4/0xe40 mutex_lock_nested+0x1b/0x30 iommu_probe_device+0x1d/0x70 intel_iommu_init+0xe90/0x11f0 pci_iommu_init+0x13/0x70 do_one_initcall+0x62/0x3f0 kernel_init_freeable+0x3da/0x6a0 kernel_init+0x1b/0x200 ret_from_fork+0x44/0x70 ret_from_fork_asm+0x1a/0x30 other info that might help us debug this: Chain exists of: iommu_probe_device_lock --> dmar_global_lock --> &device->physical_node_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&device->physical_node_lock); lock(dmar_global_lock); lock(&device->physical_node_lock); lock(iommu_probe_device_lock); *** DEADLOCK *** This driver uses a global lock to protect the list of enumerated DMA remapping units. It is necessary due to the driver's support for dynamic addition and removal of remapping units at runtime. Two distinct code paths require iteration over this remapping unit list: - Device registration and probing: the driver iterates the list to register each remapping unit with the upper layer IOMMU framework and subsequently probe the devices managed by that unit. - Global configuration: Upper layer components may also iterate the list to apply configuration changes. The lock acquisition order between these two code paths was reversed. This caused lockdep warnings, indicating a risk of deadlock. Fix this warning by releasing the global lock before invoking upper layer interfaces for device registration. Fixes: b150654 ("iommu/vt-d: Fix suspicious RCU usage") Closes: https://lore.kernel.org/linux-iommu/SJ1PR11MB612953431F94F18C954C4A9CB9D32@SJ1PR11MB6129.namprd11.prod.outlook.com/ Tested-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20250317035714.1041549-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>

Chia-Yu Chang says: ==================== AccECN protocol preparation patch series Please find the v7 v7 (03-Mar-2025) - Move 2 new patches added in v6 to the next AccECN patch series v6 (27-Dec-2024) - Avoid removing removing the potential CA_ACK_WIN_UPDATE in ack_ev_flags of patch #1 (Eric Dumazet <edumazet@google.com>) - Add reviewed-by tag in patches #2, #3, #4, #5, #6, #7, #8, #12, #14 - Foloiwng 2 new pathces are added after patch #9 (Patch that adds SKB_GSO_TCP_ACCECN) * New patch #10 to replace exisiting SKB_GSO_TCP_ECN with SKB_GSO_TCP_ACCECN in the driver to avoid CWR flag corruption * New patch #11 adds AccECN for virtio by adding new negotiation flag (VIRTIO_NET_F_HOST/GUEST_ACCECN) in feature handshake and translating Accurate ECN GSO flag between virtio_net_hdr (VIRTIO_NET_HDR_GSO_ACCECN) and skb header (SKB_GSO_TCP_ACCECN) - Add detailed changelog and comments in #13 (Eric Dumazet <edumazet@google.com>) - Move patch #14 to the next AccECN patch series (Eric Dumazet <edumazet@google.com>) v5 (5-Nov-2024) - Add helper function "tcp_flags_ntohs" to preserve last 2 bytes of TCP flags of patch #4 (Paolo Abeni <pabeni@redhat.com>) - Fix reverse X-max tree order of patches #4, #11 (Paolo Abeni <pabeni@redhat.com>) - Rename variable "delta" as "timestamp_delta" of patch #2 fo clariety - Remove patch #14 in this series (Paolo Abeni <pabeni@redhat.com>, Joel Granados <joel.granados@kernel.org>) v4 (21-Oct-2024) - Fix line length warning of patches #2, #4, #8, #10, #11, #14 - Fix spaces preferred around '|' (ctx:VxV) warning of patch #7 - Add missing CC'ed of patches #4, #12, #14 v3 (19-Oct-2024) - Fix build error in v2 v2 (18-Oct-2024) - Fix warning caused by NETIF_F_GSO_ACCECN_BIT in patch #9 (Jakub Kicinski <kuba@kernel.org>) The full patch series can be found in https://github.com/L4STeam/linux-net-next/commits/upstream_l4steam/ The Accurate ECN draft can be found in https://datatracker.ietf.org/doc/html/draft-ietf-tcpm-accurate-ecn-28 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

…-bridge-ports' Petr Machata says: ==================== mlxsw: Add VXLAN to the same hardware domain as physical bridge ports Amit Cohen writes: Packets which are trapped to CPU for forwarding in software data path are handled according to driver marking of skb->offload_{,l3}_fwd_mark. Packets which are marked as L2-forwarded in hardware, will not be flooded by the bridge to bridge ports which are in the same hardware domain as the ingress port. Currently, mlxsw does not add VXLAN bridge ports to the same hardware domain as physical bridge ports despite the fact that the device is able to forward packets to and from VXLAN tunnels in hardware. In some scenarios this can result in remote VTEPs receiving duplicate packets. To solve such packets duplication, add VXLAN bridge ports to the same hardware domain as other bridge ports. One complication is ARP suppression which requires the local VTEP to avoid flooding ARP packets to remote VTEPs if the local VTEP is able to reply on behalf of remote hosts. This is currently implemented by having the device flood ARP packets in hardware and trapping them during VXLAN encapsulation, but marking them with skb->offload_fwd_mark=1 so that the bridge will not re-flood them to physical bridge ports. The above scheme will break when VXLAN bridge ports are added to the same hardware domain as physical bridge ports as ARP packets that cannot be suppressed by the bridge will not be able to egress the VXLAN bridge ports due to hardware domain filtering. This is solved by trapping ARP packets when they enter the device and not marking them as being forwarded in hardware. Patch set overview: Patch #1 sets hardware to trap ARP packets at layer 2 Patches #2-#4 are preparations for setting hardwarwe domain of VXLAN Patch #5 sets hardware domain of VXLAN Patch #6 extends VXLAN flood test to verify that this set solves the packets duplication ==================== Link: https://patch.msgid.link/cover.1742224300.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

…uctions Add several ./test_progs tests: - arena_atomics/load_acquire - arena_atomics/store_release - verifier_load_acquire/* - verifier_store_release/* - verifier_precision/bpf_load_acquire - verifier_precision/bpf_store_release The last two tests are added to check if backtrack_insn() handles the new instructions correctly. Additionally, the last test also makes sure that the verifier "remembers" the value (in src_reg) we store-release into e.g. a stack slot. For example, if we take a look at the test program: #0: r1 = 8; /* store_release((u64 *)(r10 - 8), r1); */ #1: .8byte %[store_release]; #2: r1 = *(u64 *)(r10 - 8); #3: r2 = r10; #4: r2 += r1; #5: r0 = 0; #6: exit; At #1, if the verifier doesn't remember that we wrote 8 to the stack, then later at #4 we would be adding an unbounded scalar value to the stack pointer, which would cause the program to be rejected: VERIFIER LOG: ============= ... math between fp pointer and register with unbounded min value is not allowed For easier CI integration, instead of using built-ins like __atomic_{load,store}_n() which depend on the new __BPF_FEATURE_LOAD_ACQ_STORE_REL pre-defined macro, manually craft load-acquire/store-release instructions using __imm_insn(), as suggested by Eduard. All new tests depend on: (1) Clang major version >= 18, and (2) ENABLE_ATOMICS_TESTS is defined (currently implies -mcpu=v3 or v4), and (3) JIT supports load-acquire/store-release (currently arm64 and x86-64) In .../progs/arena_atomics.c: /* 8-byte-aligned */ __u8 __arena_global load_acquire8_value = 0x12; /* 1-byte hole */ __u16 __arena_global load_acquire16_value = 0x1234; That 1-byte hole in the .addr_space.1 ELF section caused clang-17 to crash: fatal error: error in backend: unable to write nop sequence of 1 bytes To work around such llvm-17 CI job failures, conditionally define __arena_global variables as 64-bit if __clang_major__ < 18, to make sure .addr_space.1 has no holes. Ideally we should avoid compiling this file using clang-17 at all (arena tests depend on __BPF_FEATURE_ADDR_SPACE_CAST, and are skipped for llvm-17 anyway), but that is a separate topic. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Peilin Ye <yepeilin@google.com> Link: https://lore.kernel.org/r/1b46c6feaf0f1b6984d9ec80e500cc7383e9da1a.1741049567.git.yepeilin@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

perf test 11 hwmon fails on s390 with this error # ./perf test -Fv 11 --- start --- ---- end ---- 11.1: Basic parsing test : Ok --- start --- Testing 'temp_test_hwmon_event1' Using CPUID IBM,3931,704,A01,3.7,002f temp_test_hwmon_event1 -> hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/ FAILED tests/hwmon_pmu.c:189 Unexpected config for 'temp_test_hwmon_event1', 292470092988416 != 655361 ---- end ---- 11.2: Parsing without PMU name : FAILED! --- start --- Testing 'hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/' FAILED tests/hwmon_pmu.c:189 Unexpected config for 'hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/', 292470092988416 != 655361 ---- end ---- 11.3: Parsing with PMU name : FAILED! # The root cause is in member test_event::config which is initialized to 0xA0001 or 655361. During event parsing a long list event parsing functions are called and end up with this gdb call stack: #0 hwmon_pmu__config_term (hwm=0x168dfd0, attr=0x3ffffff5ee8, term=0x168db60, err=0x3ffffff81c8) at util/hwmon_pmu.c:623 #1 hwmon_pmu__config_terms (pmu=0x168dfd0, attr=0x3ffffff5ee8, terms=0x3ffffff5ea8, err=0x3ffffff81c8) at util/hwmon_pmu.c:662 #2 0x00000000012f870c in perf_pmu__config_terms (pmu=0x168dfd0, attr=0x3ffffff5ee8, terms=0x3ffffff5ea8, zero=false, apply_hardcoded=false, err=0x3ffffff81c8) at util/pmu.c:1519 #3 0x00000000012f88a4 in perf_pmu__config (pmu=0x168dfd0, attr=0x3ffffff5ee8, head_terms=0x3ffffff5ea8, apply_hardcoded=false, err=0x3ffffff81c8) at util/pmu.c:1545 #4 0x00000000012680c4 in parse_events_add_pmu (parse_state=0x3ffffff7fb8, list=0x168dc00, pmu=0x168dfd0, const_parsed_terms=0x3ffffff6090, auto_merge_stats=true, alternate_hw_config=10) at util/parse-events.c:1508 #5 0x00000000012684c6 in parse_events_multi_pmu_add (parse_state=0x3ffffff7fb8, event_name=0x168ec10 "temp_test_hwmon_event1", hw_config=10, const_parsed_terms=0x0, listp=0x3ffffff6230, loc_=0x3ffffff70e0) at util/parse-events.c:1592 #6 0x00000000012f0e4e in parse_events_parse (_parse_state=0x3ffffff7fb8, scanner=0x16878c0) at util/parse-events.y:293 #7 0x00000000012695a0 in parse_events__scanner (str=0x3ffffff81d8 "temp_test_hwmon_event1", input=0x0, parse_state=0x3ffffff7fb8) at util/parse-events.c:1867 #8 0x000000000126a1e8 in __parse_events (evlist=0x168b580, str=0x3ffffff81d8 "temp_test_hwmon_event1", pmu_filter=0x0, err=0x3ffffff81c8, fake_pmu=false, warn_if_reordered=true, fake_tp=false) at util/parse-events.c:2136 #9 0x00000000011e36aa in parse_events (evlist=0x168b580, str=0x3ffffff81d8 "temp_test_hwmon_event1", err=0x3ffffff81c8) at /root/linux/tools/perf/util/parse-events.h:41 #10 0x00000000011e3e64 in do_test (i=0, with_pmu=false, with_alias=false) at tests/hwmon_pmu.c:164 #11 0x00000000011e422c in test__hwmon_pmu (with_pmu=false) at tests/hwmon_pmu.c:219 #12 0x00000000011e431c in test__hwmon_pmu_without_pmu (test=0x1610368 <suite.hwmon_pmu>, subtest=1) at tests/hwmon_pmu.c:23 where the attr::config is set to value 292470092988416 or 0x10a0000000000 in line 625 of file ./util/hwmon_pmu.c: attr->config = key.type_and_num; However member key::type_and_num is defined as union and bit field: union hwmon_pmu_event_key { long type_and_num; struct { int num :16; enum hwmon_type type :8; }; }; s390 is big endian and Intel is little endian architecture. The events for the hwmon dummy pmu have num = 1 or num = 2 and type is set to HWMON_TYPE_TEMP (which is 10). On s390 this assignes member key::type_and_num the value of 0x10a0000000000 (which is 292470092988416) as shown in above trace output. Fix this and export the structure/union hwmon_pmu_event_key so the test shares the same implementation as the event parsing functions for union and bit fields. This should avoid endianess issues on all platforms. Output after: # ./perf test -F 11 11.1: Basic parsing test : Ok 11.2: Parsing without PMU name : Ok 11.3: Parsing with PMU name : Ok # Fixes: 531ee0f ("perf test: Add hwmon "PMU" test") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250131112400.568975-1-tmricht@linux.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Ian told me that there are many memory leaks in the hierarchy mode. I can easily reproduce it with the follwing command. $ make DEBUG=1 EXTRA_CFLAGS=-fsanitize=leak $ perf record --latency -g -- ./perf test -w thloop $ perf report -H --stdio ... Indirect leak of 168 byte(s) in 21 object(s) allocated from: #0 0x7f3414c16c65 in malloc ../../../../src/libsanitizer/lsan/lsan_interceptors.cpp:75 #1 0x55ed3602346e in map__get util/map.h:189 #2 0x55ed36024cc4 in hist_entry__init util/hist.c:476 #3 0x55ed36025208 in hist_entry__new util/hist.c:588 #4 0x55ed36027c05 in hierarchy_insert_entry util/hist.c:1587 #5 0x55ed36027e2e in hists__hierarchy_insert_entry util/hist.c:1638 #6 0x55ed36027fa4 in hists__collapse_insert_entry util/hist.c:1685 #7 0x55ed360283e8 in hists__collapse_resort util/hist.c:1776 #8 0x55ed35de0323 in report__collapse_hists /home/namhyung/project/linux/tools/perf/builtin-report.c:735 #9 0x55ed35de15b4 in __cmd_report /home/namhyung/project/linux/tools/perf/builtin-report.c:1119 #10 0x55ed35de43dc in cmd_report /home/namhyung/project/linux/tools/perf/builtin-report.c:1867 #11 0x55ed35e66767 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:351 #12 0x55ed35e66a0e in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:404 #13 0x55ed35e66b67 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:448 #14 0x55ed35e66eb0 in main /home/namhyung/project/linux/tools/perf/perf.c:556 #15 0x7f340ac33d67 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 ... $ perf report -H --stdio 2>&1 | grep -c '^Indirect leak' 93 I found that hist_entry__delete() missed to release child entries in the hierarchy tree (hroot_{in,out}). It needs to iterate the child entries and call hist_entry__delete() recursively. After this change: $ perf report -H --stdio 2>&1 | grep -c '^Indirect leak' 0 Reported-by: Ian Rogers <irogers@google.com> Tested-by Thomas Falcon <thomas.falcon@intel.com> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250307061250.320849-2-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>

The env.pmu_mapping can be leaked when it reads data from a pipe on AMD. For a pipe data, it reads the header data including pmu_mapping from PERF_RECORD_HEADER_FEATURE runtime. But it's already set in: perf_session__new() __perf_session__new() evlist__init_trace_event_sample_raw() evlist__has_amd_ibs() perf_env__nr_pmu_mappings() Then it'll overwrite that when it processes the HEADER_FEATURE record. Here's a report from address sanitizer. Direct leak of 2689 byte(s) in 1 object(s) allocated from: #0 0x7fed8f814596 in realloc ../../../../src/libsanitizer/lsan/lsan_interceptors.cpp:98 #1 0x5595a7d416b1 in strbuf_grow util/strbuf.c:64 #2 0x5595a7d414ef in strbuf_init util/strbuf.c:25 #3 0x5595a7d0f4b7 in perf_env__read_pmu_mappings util/env.c:362 #4 0x5595a7d12ab7 in perf_env__nr_pmu_mappings util/env.c:517 #5 0x5595a7d89d2f in evlist__has_amd_ibs util/amd-sample-raw.c:315 #6 0x5595a7d87fb2 in evlist__init_trace_event_sample_raw util/sample-raw.c:23 #7 0x5595a7d7f893 in __perf_session__new util/session.c:179 #8 0x5595a7b79572 in perf_session__new util/session.h:115 #9 0x5595a7b7e9dc in cmd_report builtin-report.c:1603 #10 0x5595a7c019eb in run_builtin perf.c:351 #11 0x5595a7c01c92 in handle_internal_command perf.c:404 #12 0x5595a7c01deb in run_argv perf.c:448 #13 0x5595a7c02134 in main perf.c:556 #14 0x7fed85833d67 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Let's free the existing pmu_mapping data if any. Cc: Ravi Bangoria <ravi.bangoria@amd.com> Link: https://lore.kernel.org/r/20250311000416.817631-1-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>

…ge_order() Patch series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT", v3. Let's add an "easy" way to decide -- without false positives, without page-mapcounts and without page table/rmap scanning -- whether a large folio is "certainly mapped exclusively" into a single MM, or whether it "maybe mapped shared" into multiple MMs. Use that information to implement Copy-on-Write reuse, to convert folio_likely_mapped_shared() to folio_maybe_mapped_share(), and to introduce a kernel config option that lets us not use+maintain per-page mapcounts in large folios anymore. The bigger picture was presented at LSF/MM [1]. This series is effectively a follow-up on my early work [2], which implemented a more precise, but also more complicated, way to identify whether a large folio is "mapped shared" into multiple MMs or "mapped exclusively" into a single MM. 1 Patch Organization ==================== Patch #1 -> #6: make more room in order-1 folios, so we have two "unsigned long" available for our purposes Patch #7 -> #11: preparations Patch #12: MM owner tracking for large folios Patch #13: COW reuse for PTE-mapped anon THP Patch #14: folio_maybe_mapped_shared() Patch #15 -> #20: introduce and implement CONFIG_NO_PAGE_MAPCOUNT 2 MM owner tracking =================== We assign each MM a unique ID ("MM ID"), to be able to squeeze more information in our folios. On 32bit we use 15-bit IDs, on 64bit we use 31-bit IDs. For each large folios, we now store two MM-ID+mapcount ("slot") combinations: * mm0_id + mm0_mapcount * mm1_id + mm1_mapcount On 32bit, we use a 16-bit per-MM mapcount, on 64bit an ordinary 32bit mapcount. This way, we require 2x "unsigned long" on 32bit and 64bit for both slots. Paired with the large mapcount, we can reliably identify whether one of these MMs is the current owner (-> owns all mappings) or even holds all folio references (-> owns all mappings, and all references are from mappings). As long as only two MMs map folio pages at a time, we can reliably and precisely identify whether a large folio is "mapped shared" or "mapped exclusively". Any additional MM that starts mapping the folio while there are no free slots becomes an "untracked MM". If one such "untracked MM" is the last one mapping a folio exclusively, we will not detect the folio as "mapped exclusively" but instead as "maybe mapped shared". (exception: only a single mapping remains) So that's where the approach gets imprecise. For now, we use a bit-spinlock to sync the large mapcount + slots, and make sure we do keep the machinery fast, to not degrade (un)map performance drastically: for example, we make sure to only use a single atomic (when grabbing the bit-spinlock), like we would already perform when updating the large mapcount. 3 CONFIG_NO_PAGE_MAPCOUNT ========================= patch #15 -> #20 spell out and document what exactly is affected when not maintaining the per-page mapcounts in large folios anymore. Most importantly, as we cannot maintain folio->_nr_pages_mapped anymore when (un)mapping pages, we'll account a complete folio as mapped if a single page is mapped. In addition, we'll not detect partially mapped anonymous folios as such in all cases yet. Likely less relevant changes include that we might now under-estimate the USS (Unique Set Size) of a process, but never over-estimate it. The goal is to make CONFIG_NO_PAGE_MAPCOUNT the default at some point, to then slowly make it the only option, as we learn about real-life impacts and possible ways to mitigate them. 4 Performance ============= Detailed performance numbers were included in v1 [3], and not that much changed between v1 and v2. I did plenty of measurements on different systems in the meantime, that all revealed slightly different results. The pte-mapped-folio micro-benchmarks [4] are fairly sensitive to code layout changes on some systems. Especially the fork() benchmark started being more-shaky-than-before on recent kernels for some reason. In summary, with my micro-benchmarks: * Small folios are not impacted. * CoW performance seems to be mostly unchanged across all folios sizes. * CoW reuse performance of large folios now matches CoW reuse performance of small folios, because we now actually implement the CoW reuse optimization. On an Intel Xeon Silver 4210R I measured a ~65% reduction in runtime, on an arm64 system I measured ~54% reduction. * munmap() performance improves with CONFIG_NO_PAGE_MAPCOUNT. I saw double-digit % reduction (up to ~30% on an Intel Xeon Silver 4210R and up to ~70% on an AmpereOne A192-32X) with larger folios. The larger the folios, the larger the performance improvement. * munmao() performance very slightly (couple percent) degrades without CONFIG_NO_PAGE_MAPCOUNT for smaller folios. For larger folios, there seems to be no change at all. * fork() performance improves with CONFIG_NO_PAGE_MAPCOUNT. I saw double-digit % reduction (up to ~20% on an Intel Xeon Silver 4210R and up to ~10% on an AmpereOne A192-32X) with larger folios. The larger the folios, the larger the performance improvement. * While fork() performance without CONFIG_NO_PAGE_MAPCOUNT seems to be almost unchanged on some systems, I saw some degradation for smaller folios on the AmpereOne A192-32X. I did not investigate the details yet, but I suspect code layout changes or suboptimal code placement / inlining. I'm not to worried about the fork() micro-benchmarks for smaller folios given how shaky the results are lately and by how much we improved fork() performance recently. I also ran case-anon-cow-rand and case-anon-cow-seq part of vm-scalability, to assess the scalability and the impact of the bit-spinlock. My measurements on a two 2-socket 10-core Intel Xeon Silver 4210R CPU revealed no significant changes. Similarly, running these benchmarks with 2 MiB THPs enabled on the AmpereOne A192-32X with 192 cores, I got < 1% difference with < 1% stdev, which is nice. So far, I did not get my hands on a similarly large system with multiple sockets. I found no other fitting scalability benchmarks that seem to really hammer on concurrent mapping/unmapping of large folio pages like case-anon-cow-seq does. 5 Concerns ========== 5.1 Bit spinlock ---------------- I'm not quite happy about the bit-spinlock, but so far it does not seem to affect scalability in my measurements. If it ever becomes a problem we could either investigate improving the locking, or simply stopping the MM tracking once there are "too many mappings" and simply assume that the folio is "mapped shared" until it was freed. This would be similar (but slightly different) to the "0,1,2,stopped" counting idea Willy had at some point. Adding that logic to "stop tracking" adds more code to the hot path, so I avoided that for now. 5.2 folio_maybe_mapped_shared() ------------------------------- I documented the change from folio_likely_mapped_shared() to folio_maybe_mapped_shared() quite extensively. If we run into surprises, I have some ideas on how to resolve them. For now, I think we should be fine. 5.3 Added code to map/unmap hot path ------------------------------------ So far, it looks like the added code on the rmap hot path does not really seem to matter much in the bigger picture. I'd like to further reduce it (and possibly improve fork() performance further), but I don't easily see how right now. Well, and I am out of puff 🙂 Having that said, alternatives I considered (e.g., per-MM per-folio mapcount) would add a lot more overhead to these hot paths. 6 Future Work ============= 6.1 Large mapcount ------------------ It would be very handy if the large mapcount would count how often folio pages are actually mapped into page tables: a PMD on x86-64 would count 512 times. Calculating the average per-page mapcount will be easy, and remapping (PMD->PTE) folios would get even faster. That would also remove the need for the entire mapcount (except for PMD-sized folios for memory statistics reasons ...), and allow for mapping folios larger than PMDs (e.g., 4 MiB) easily. We likely would also have to take the same number of folio references to make our folio_mapcount() == folio_ref_count() work, and we'd want to be able to avoid mapcount+refcount overflows: this could already become an issue with pte-mapped PUD-sized folios (fsdax). One approach we discussed in the THP cabal meeting is (1) extending the mapcount for large folios to 64bit (at least on 64bit systems) and (2) keeping the refcount at 32bit, but (3) having exactly one reference if the the mapcount != 0. It should be doable, but there are some corner cases to consider on the unmap path; it is something that I will be looking into next. 6.2 hugetlb ----------- I'd love to make use of the same tracking also for hugetlb. The real problem is PMD table sharing: getting a page mapped by MM X and unmapped by MM Y will not work. With mshare, that problem should not exist (all mapping/unmapping will be routed through the mshare MM). [1] https://lwn.net/Articles/974223/ [2] https://lore.kernel.org/linux-mm/a9922f58-8129-4f15-b160-e0ace581bcbe@redhat.com/T/ [3] https://lkml.kernel.org/r/20240829165627.2256514-1-david@redhat.com [4] https://gitlab.com/davidhildenbrand/scratchspace/-/raw/main/pte-mapped-folio-benchmarks.c This patch (of 20): Let's factor it out into a simple helper function. This helper will also come in handy when working with code where we know that our folio is large. Maybe in the future we'll have the order readily available for small and large folios; in that case, folio_large_order() would simply translate to folio_order(). Link: https://lkml.kernel.org/r/20250303163014.1128035-1-david@redhat.com Link: https://lkml.kernel.org/r/20250303163014.1128035-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Lance Yang <ioworker0@gmail.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirks^H^Hski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michal Koutn <mkoutny@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: tejun heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush() generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC, which causes the flush_bio to be throttled by wbt_wait(). An example from v5.4, similar problem also exists in upstream: crash> bt 2091206 PID: 2091206 TASK: ffff2050df92a300 CPU: 109 COMMAND: "kworker/u260:0" #0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8 #1 [ffff800084a2f820] __schedule at ffff800040bfa0c4 #2 [ffff800084a2f880] schedule at ffff800040bfa4b4 #3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4 #4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc #5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0 #6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254 #7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38 #8 [ffff800084a2fa60] generic_make_request at ffff800040570138 #9 [ffff800084a2fae0] submit_bio at ffff8000405703b4 #10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs] #11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs] #12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs] #13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs] #14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs] #15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs] #16 [ffff800084a2fdb0] process_one_work at ffff800040111d08 #17 [ffff800084a2fe00] worker_thread at ffff8000401121cc #18 [ffff800084a2fe70] kthread at ffff800040118de4 After commit 2def284 ("xfs: don't allow log IO to be throttled"), the metadata submitted by xlog_write_iclog() should not be throttled. But due to the existence of the dm layer, throttling flush_bio indirectly causes the metadata bio to be throttled. Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes wbt_should_throttle() return false to avoid wbt_wait(). Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com> Reviewed-by: Tianxiang Peng <txpeng@tencent.com> Reviewed-by: Hao Peng <flyingpeng@tencent.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>

In ThinPro, we use the convention <upstream_ver>+hp<patchlevel> for the kernel package. This does not have a dash in the name or version. This is built by editing ".version" before a build, and setting EXTRAVERSION="+hp" and KDEB_PKGVERSION make variables: echo 68 > .version make -j<n> EXTRAVERSION="+hp" bindeb-pkg KDEB_PKGVERSION=6.12.2+hp69 .deb name: linux-image-6.12.2+hp_6.12.2+hp69_amd64.deb Since commit 7d4f07d ("kbuild: deb-pkg: squash scripts/package/deb-build-option to debian/rules"), this no longer works. The deb build logic changed, even though, the commit message implies that the logic should be unmodified. Before, KBUILD_BUILD_VERSION was not set if the KDEB_PKGVERSION did not contain a dash. After the change KBUILD_BUILD_VERSION is always set to KDEB_PKGVERSION. Since this determines UTS_VERSION, the uname output to look off: (now) uname -a: version 6.12.2+hp ... #6.12.2+hp69 (expected) uname -a: version 6.12.2+hp ... #69 Update the debian/rules logic to restore the original behavior. Fixes: 7d4f07d ("kbuild: deb-pkg: squash scripts/package/deb-build-option to debian/rules") Signed-off-by: Alexandru Gagniuc <alexandru.gagniuc@hp.com> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

syzkaller triggered an oversized kvmalloc() warning. Silence it by adding __GFP_NOWARN. syzkaller log: WARNING: CPU: 7 PID: 518 at mm/util.c:665 __kvmalloc_node_noprof+0x175/0x180 CPU: 7 UID: 0 PID: 518 Comm: c_repro Not tainted 6.11.0-rc6+ #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:__kvmalloc_node_noprof+0x175/0x180 RSP: 0018:ffffc90001e67c10 EFLAGS: 00010246 RAX: 0000000000000100 RBX: 0000000000000400 RCX: ffffffff8149d46b RDX: 0000000000000000 RSI: ffff8881030fae80 RDI: 0000000000000002 RBP: 000000712c800000 R08: 0000000000000100 R09: 0000000000000000 R10: ffffc90001e67c10 R11: 0030ae0601000000 R12: 0000000000000000 R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000 FS: 00007fde79159740(0000) GS:ffff88813bdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000180 CR3: 0000000105eb4005 CR4: 00000000003706b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ib_umem_odp_get+0x1f6/0x390 mlx5_ib_reg_user_mr+0x1e8/0x450 ib_uverbs_reg_mr+0x28b/0x440 ib_uverbs_write+0x7d3/0xa30 vfs_write+0x1ac/0x6c0 ksys_write+0x134/0x170 ? __sanitizer_cov_trace_pc+0x1c/0x50 do_syscall_64+0x50/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fixes: 3782495 ("RDMA/odp: Use kvcalloc for the dma_list and page_list") Signed-off-by: Shay Drory <shayd@nvidia.com> Link: https://patch.msgid.link/c6cb92379de668be94894f49c2cfa40e73f94d56.1742388096.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org>

Xiaofei Tan and others added 15 commits June 29, 2020 16:16

cifs: Display local UID details for SMB sessions in DebugData

aadd69c

This is useful for distinguishing SMB sessions on a multiuser mount. Signed-off-by: Paul Aurich <paul@darkrain42.org> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com>

Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git…

8b082a4

…/viro/vfs Pull sysctl fix from Al Viro: "Another regression fix for sysctl changes this cycle..." * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Call sysctl_head_finish on error

pull bot added the ⤵️ pull label Jul 4, 2020

pull bot merged commit 35e884f into vchong:master Jul 4, 2020

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

[pull] master from torvalds:master #6

[pull] master from torvalds:master #6

pull bot commented Jul 4, 2020 •

edited

Loading

[pull] master from torvalds:master #6

[pull] master from torvalds:master #6

Conversation

pull bot commented Jul 4, 2020 • edited Loading

pull bot commented Jul 4, 2020 •

edited

Loading