stm32g474

Can Example for Arduino Core STM32

一款基于STM32G474的四开关Buck-Boost数字电源，支持TypeC接口PD诱骗输入和DC5.5接口输入，输入/输出最高48V10A，这是我的毕业设计，现在开源出来，含原理图、PCB、程序源码、外壳3D模型等资料。

无感FOC项目，采用EKF观测器或非线性磁链观测器(Nonlinear Flux Observer)或滑模观测器(SMO)，MCU采用STM32G474RET6，板子使用ST的X-NUCLEO-IHM07M1评估板，项目为Clion的CMAKE项目，可以使用Clion或VSCode打开。

STM32G474 USB CDC example implementation, combined with Jan Breuer's SCPI parser library v2

基于STM32G474的数字电源，这是上位机仓库，下位机在https://github.com/UF4DigitalPower/UF4DigitalPower

基于 STM32G474 的双向四管升降压数字电源 设计输入: 5V - 40V 10AMAX 输出范围: 0.5V - 40V， 功率拓扑: 四开关同步整流 Buck-Boost 正反向电流均可以到0-10A

Precision 0–50 V programmable laboratory PSU with 1 mV/1 mA setting steps, hybrid synchronous-buck + linear regulation, STM32G474 control, INA228 metering, and layered hardware protection.

HAL layer for my projects

STM32G474单相逆变器控制固件｜2023全国大学生电子设计竞赛A题基础部分

CNN Model for MCU ADC

Autonomous RC car

STM32G474 & RFM95W (SX1276) LoRa telemetry node (868MHz). Features FreeRTOS-based architecture, interrupt-driven radio flow, BME280 monitoring, SSD1306 OLED, and USB CDC CLI. Includes ADC+DMA battery sensing and modular firmware design for industrial telemetry.

Open-source ESC for stepper and brushless motors, designed in KiCad.

Experimental STM32G474-based high-current battery charger and programmable synchronous buck converter. KiCad hardware and STM32CubeIDE firmware.

A bare metal STM32G474 Project.

Low-cost 8Mhz dual-channel 12-bit wireless oscilloscope, minimal soldering, no custom PCB, based on demo boards - STM Nucleo-G474RE & M5Stamp C3U

A minimal cooperative multitasking operating system with a process management API and chaser light application as demo.

A minimal run-to-completion scheduler with process management API, configurable context switching, and a demo application using 8 concurrent LED processes.

STM32G474 beginner starter project with OLED menu and GPIO, I2C, SPI, SD, FRAM, UART, encoder and Classic CAN examples

A minimal unit test framework in C for embedded projects, designed for STM32 (Arm Cortex-M4) and using sprintf with a 2D buffer to display test results.