Hifiberry DAC HD2 no sound #377
Comments
|
Just for reference this is a duplicate of #357 |
|
Dear shawaj, Yes i see i have explore the fully internet for looking how i can solve my problem so that also my Hifiberry dad hd2 card work. Please can you told me how i can solve my problem? |
|
@arjan5340 could you report the output of the following commands from the terminal: |
|
Dear,
Thanks for your help. Hereby the information you ask for. Hopefully you will and can help me.
root@569d0a627462:/usr/src# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: bcm2835-jack [bcm2835 Headphones], device 0: bcm2835 Headphones [bcm2835 Headphones]
Subdevices: 7/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
root@569d0a627462:/usr/src#
root@569d0a627462:/usr/src# cat /proc/asound/modules
0 snd_bcm2835
root@569d0a627462:/usr/src# cat /proc/asound/cards
0 [bcm2835-jack ]: bcm2835_headphonbcm2835 Headphones - bcm2835 Headphones
bcm2835 Headphones
… Op 25 dec. 2020, om 22:56 heeft Aaron Shaw ***@***.***> het volgende geschreven:
@arjan5340 <https://github.com/arjan5340> could you report the output of the following commands from the terminal:
aplay -l
cat /proc/asound/modules
cat /proc/asound/cards
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub <#377 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AOQI7BPHC65EGLF5ULM3CNDSWUDBHANCNFSM4VG2HRPA>.
|
|
@arjan5340 and this was from the It hasn't loaded the soundcard which is why you aren't getting any sound. Let me know answer to my question above, and then I'll provide some screenshots for you of the settings you will need in balenaCloud to fix this. |
|
This screenshot is from my balena sound.
Verstuurd vanaf mijn iPhone
… Op 26 dec. 2020 om 15:49 heeft Aaron Shaw ***@***.***> het volgende geschreven:
@arjan5340 and this was from the sound container on balenaCloud or a different one?
It hasn't loaded the soundcard which is why you aren't getting any sound.
Let me know answer to my question above, and then I'll provide some screenshots for you of the settings you will need in balenaCloud to fix this.
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub, or unsubscribe.
|
|
@arjan5340 there was no picture? Can you try posting it directly on GitHub via the "view it on GitHub" link |
|
Sorry hereby the screenshot again. Thanks for your help iam new with Balena. I have 3 pi's and 3 amplifiers with on each amplifier 2 speakers. When i use the jack plug i have sound but when i plug on the Hifiberry DAC HD2 boards i don't have any sound. Its really fantastic when you will and can help me. |
|
@arjan5340 where it says "Define DT parameters" it currently says Also you can delete the BALENA_HOST_CONFIG_dtoverlay declaration and above where it says "Define DT overlays" you can change this to |
|
Dear Shawaj, I try it now. Many thanks for help. |
|
@arjan5340 you are using the HD2 DAC right? If so the correct overlay for you is I updated the above instructions to reflect that |
|
you are using the HD2 DAC right? that is correct. i try hifiberry-dacplushd |
|
I have changed the parameters as you say. But i don't have any sound yet. root@569d0a627462:/usr/src# aplay -l root@569d0a627462:/usr/src# cat /proc/asound/modules root@569d0a627462:/usr/src# cat /proc/asound/cards In the screenshot the parameters as i set now: |
|
Dear shawaj Hereby the dmesg hope this help for you. Huge logroot@569d0a627462:/usr/src# dmesg [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 5.4.58 (oe-user@oe-host) (gcc version 8.3.0 (GCC)) #1 SMP PREEMPT Wed Dec 16 13:40:47 UTC 2020 [ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.2 [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] On node 0 totalpages: 1025536 [ 0.000000] DMA zone: 4096 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 255488 pages, LIFO batch:63 [ 0.000000] DMA32 zone: 12032 pages used for memmap [ 0.000000] DMA32 zone: 770048 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 32 pages/cpu s90392 r8192 d32488 u131072 [ 0.000000] pcpu-alloc: s90392 r8192 d32488 u131072 alloc=32*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1009408 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 smsc95xx.macaddr=DC:A6:32:86:C4:5B vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 dwc_otg.lpm_enable=0 console=tty1 console=ttyS0,115200 rootwait cgroup_enable=memory root=UUID=ba1eadef-3804-4ba7-acaa-22c728d7b67d rootwait [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x3a600000-0x3e600000] (64MB) [ 0.000000] Memory: 3665924K/4102144K available (10748K kernel code, 1176K rwdata, 3812K rodata, 10560K init, 1223K bss, 174076K reserved, 262144K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 36209 entries in 142 pages [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x320/0x4ac with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000217] Console: colour dummy device 80x25 [ 0.000622] printk: console [tty1] enabled [ 0.000680] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.000713] pid_max: default: 32768 minimum: 301 [ 0.001034] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.001093] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.024025] ASID allocator initialised with 32768 entries [ 0.032017] rcu: Hierarchical SRCU implementation. [ 0.040379] EFI services will not be available. [ 0.048077] smp: Bringing up secondary CPUs ... [ 0.080272] Detected PIPT I-cache on CPU1 [ 0.080329] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.112376] Detected PIPT I-cache on CPU2 [ 0.112416] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] [ 0.144484] Detected PIPT I-cache on CPU3 [ 0.144523] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] [ 0.144671] smp: Brought up 1 node, 4 CPUs [ 0.144756] SMP: Total of 4 processors activated. [ 0.144777] CPU features: detected: 32-bit EL0 Support [ 0.144798] CPU features: detected: CRC32 instructions [ 0.169025] CPU: All CPU(s) started at EL2 [ 0.169091] alternatives: patching kernel code [ 0.170569] devtmpfs: initialized [ 0.180030] Enabled cp15_barrier support [ 0.180078] Enabled setend support [ 0.180672] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.180715] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.187258] pinctrl core: initialized pinctrl subsystem [ 0.187955] DMI not present or invalid. [ 0.188302] NET: Registered protocol family 16 [ 0.191008] DMA: preallocated 1024 KiB pool for atomic allocations [ 0.191790] cpuidle: using governor menu [ 0.192150] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.192382] Serial: AMBA PL011 UART driver [ 0.195387] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.208901] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-10-22 13:59, variant start_cd [ 0.212913] raspberrypi-firmware soc:firmware: Firmware hash is 74e754ff8947c58d2773253f77f6f68a303188f8 [ 0.254006] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.257146] vgaarb: loaded [ 0.257546] SCSI subsystem initialized [ 0.257758] usbcore: registered new interface driver usbfs [ 0.257826] usbcore: registered new interface driver hub [ 0.257945] usbcore: registered new device driver usb [ 0.258241] usb_phy_generic phy: phy supply vcc not found, using dummy regulator [ 0.259783] clocksource: Switched to clocksource arch_sys_counter [ 0.975220] VFS: Disk quotas dquot_6.6.0 [ 0.975342] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.975501] FS-Cache: Loaded [ 0.975710] CacheFiles: Loaded [ 0.985639] thermal_sys: Registered thermal governor 'step_wise' [ 0.985962] NET: Registered protocol family 2 [ 0.986693] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.986754] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.986964] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.987367] TCP: Hash tables configured (established 32768 bind 32768) [ 0.987566] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.987633] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.987989] NET: Registered protocol family 1 [ 0.988769] RPC: Registered named UNIX socket transport module. [ 0.988794] RPC: Registered udp transport module. [ 0.988812] RPC: Registered tcp transport module. [ 0.988830] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.988859] PCI: CLS 0 bytes, default 64 [ 1.061425] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 1.061682] kvm: Limiting the IPA size due to kernel Virtual Address limit [ 1.061706] kvm [1]: IPA Size Limit: 43bits [ 1.062517] kvm [1]: vgic interrupt IRQ1 [ 1.062757] kvm [1]: Hyp mode initialized successfully [ 1.065210] Initialise system trusted keyrings [ 1.065502] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 1.073967] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.074233] FS-Cache: Netfs 'nfs' registered for caching [ 1.074887] NFS: Registering the id_resolver key type [ 1.074927] Key type id_resolver registered [ 1.074947] Key type id_legacy registered [ 1.074975] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.076295] Key type asymmetric registered [ 1.076319] Asymmetric key parser 'x509' registered [ 1.076370] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.076622] io scheduler mq-deadline registered [ 1.076646] io scheduler kyber registered [ 1.079934] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.079972] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 1.080046] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000 [ 1.080117] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0000000000 [ 1.129877] brcm-pcie fd500000.pcie: link up, 5 GT/s x1 (SSC) [ 1.130189] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.130219] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.130246] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff]) [ 1.130314] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.130542] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.134289] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 1.134438] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 1.134866] pci 0000:01:00.0: PME# supported from D0 D3cold [ 1.138330] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.138364] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 1.138452] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.138481] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.142632] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 1.145304] iproc-rng200 fe104000.rng: hwrng registered [ 1.145687] vc-mem: phys_addr:0x00000000 mem_base=0x3f000000 mem_size:0x3f600000(1014 MiB) [ 1.146441] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 1.146866] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.157261] brd: module loaded [ 1.168720] loop: module loaded [ 1.169283] zram: Added device: zram0 [ 1.170540] Loading iSCSI transport class v2.0-870. [ 1.172445] libphy: Fixed MDIO Bus: probed [ 1.172494] tun: Universal TUN/TAP device driver, 1.6 [ 1.173180] bcmgenet fd580000.ethernet: failed to get enet clock [ 1.173210] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 1.173240] bcmgenet fd580000.ethernet: failed to get enet-wol clock [ 1.173268] bcmgenet fd580000.ethernet: failed to get enet-eee clock [ 1.173302] bcmgenet: Skipping UMAC reset [ 1.183818] libphy: bcmgenet MII bus: probed [ 1.235914] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.237395] pci 0000:00:00.0: enabling device (0000 -> 0002) [ 1.237470] xhci_hcd 0000:01:00.0: enabling device (0000 -> 0002) [ 1.237630] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.237669] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.238595] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890 [ 1.239761] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 1.239821] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.239846] usb usb1: Product: xHCI Host Controller [ 1.239867] usb usb1: Manufacturer: Linux 5.4.58 xhci-hcd [ 1.239888] usb usb1: SerialNumber: 0000:01:00.0 [ 1.240484] hub 1-0:1.0: USB hub found [ 1.240591] hub 1-0:1.0: 1 port detected [ 1.241204] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.241235] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.241272] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.241659] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04 [ 1.241689] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.241712] usb usb2: Product: xHCI Host Controller [ 1.241733] usb usb2: Manufacturer: Linux 5.4.58 xhci-hcd [ 1.241754] usb usb2: SerialNumber: 0000:01:00.0 [ 1.242309] hub 2-0:1.0: USB hub found [ 1.242404] hub 2-0:1.0: 4 ports detected [ 1.243802] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.244065] dwc_otg: FIQ enabled [ 1.244074] dwc_otg: NAK holdoff enabled [ 1.244082] dwc_otg: FIQ split-transaction FSM enabled [ 1.244092] Module dwc_common_port init [ 1.244569] usbcore: registered new interface driver uas [ 1.244672] usbcore: registered new interface driver usb-storage [ 1.244797] usbcore: registered new interface driver usbserial_generic [ 1.244840] usbserial: USB Serial support registered for generic [ 1.245050] mousedev: PS/2 mouse device common for all mice [ 1.247483] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.249861] sdhci: Secure Digital Host Controller Interface driver [ 1.249886] sdhci: Copyright(c) Pierre Ossman [ 1.250396] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [ 1.250875] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.254964] ledtrig-cpu: registered to indicate activity on CPUs [ 1.255092] hidraw: raw HID events driver (C) Jiri Kosina [ 1.255167] usbcore: registered new interface driver usbhid [ 1.255175] usbhid: USB HID core driver [ 1.255851] vchiq: vchiq_init_state: slot_zero = (____ptrval____) [ 1.257969] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP) [ 1.258009] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) [ 1.258130] IPVS: ipvs loaded. [ 1.258319] Initializing XFRM netlink socket [ 1.258606] NET: Registered protocol family 10 [ 1.259253] Segment Routing with IPv6 [ 1.259316] NET: Registered protocol family 17 [ 1.259347] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.259407] Key type dns_resolver registered [ 1.259748] registered taskstats version 1 [ 1.259806] Loading compiled-in X.509 certificates [ 1.259930] Key type ._fscrypt registered [ 1.259939] Key type .fscrypt registered [ 1.264246] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.264313] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 14, base_baud = 0) is a PL011 rev2 [ 1.268604] printk: console [ttyS0] disabled [ 1.268643] fe215040.serial: ttyS0 at MMIO 0x0 (irq = 16, base_baud = 62500000) is a 16550 [ 2.493382] printk: console [ttyS0] enabled [ 2.497939] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 2.506130] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 2.512238] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 2.563650] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 2.570797] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.577931] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.583529] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA [ 2.592739] of_cfs_init [ 2.593904] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.595288] of_cfs_init: OK [ 2.602415] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.619333] Freeing unused kernel memory: 10560K [ 2.624116] Run /init as init process [ 2.648557] random: fast init done [ 2.675868] mmc1: new high speed SDIO card at address 0001 [ 2.715854] mmc0: new ultra high speed DDR50 SDHC card at address 0001 [ 2.727260] mmcblk0: mmc0:0001 SD16G 14.6 GiB [ 2.743470] mmcblk0: p1 p2 p3 p4 < p5 p6 > [ 2.751813] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.906400] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 2.914756] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.922043] usb 1-1: Product: USB2.0 Hub [ 2.927290] hub 1-1:1.0: USB hub found [ 2.931439] hub 1-1:1.0: 4 ports detected [ 3.070967] zram0: detected capacity change from 0 to 2016579584 [ 4.244017] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.275575] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null) [ 4.683424] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 4.816706] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null) [ 5.097191] systemd[1]: System time before build time, advancing clock. [ 5.438107] systemd[1]: /lib/systemd/system/chronyd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/chrony/chronyd.pid → /run/chrony/chronyd.pid; please update the unit file accordingly. [ 5.584875] random: systemd: uninitialized urandom read (16 bytes read) [ 5.607970] random: systemd: uninitialized urandom read (16 bytes read) [ 5.631938] random: systemd: uninitialized urandom read (16 bytes read) [ 8.172773] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 [ 8.184402] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 [ 8.197517] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 [ 8.210914] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 [ 8.225362] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 8.240729] mc: Linux media interface: v0.10 [ 8.266914] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 8.274424] [vc_sm_connected_init]: start [ 8.285423] vc_sm_cma_vchi_init: failed to open VCHI service (-1) [ 8.285428] [vc_sm_connected_init]: failed to initialize shared memory service [ 8.291338] videodev: Linux video capture interface: v2.00 [ 8.332383] snd-rpi-hifiberry-dacplushd soc:sound: ASoC: failed to init link HiFiBerry DAC+ HD: -517 [ 8.364284] pcm179x 1-004c: No cache used with register defaults set! [ 8.392808] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [ 8.404440] [drm] No displays found. Consider forcing hotplug if HDMI is attached [ 8.440873] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) [ 8.448956] snd-rpi-hifiberry-dacplushd soc:sound: pcm179x-hifi <-> fe203000.i2s mapping ok [ 8.457753] snd-rpi-hifiberry-dacplushd soc:sound: ASoC: no DMI vendor name! [ 8.458018] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 8.485624] [drm] No driver support for vblank timestamp query. [ 8.493936] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL [ 8.521422] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 [ 8.540022] zram: Can't change algorithm for initialized device [ 8.557890] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 8.579356] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 8.580498] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 8.581708] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 8.633715] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 8.646467] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-1) [ 8.662840] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 8.664957] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 8.680274] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.692088] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-1) [ 8.692120] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-1) [ 8.800822] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 8.805652] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 8.815658] usbcore: registered new interface driver brcmfmac [ 8.861316] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2 [ 9.080069] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 9.099152] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:19:54 version 7.45.206 (r725000 CY) FWID 01-88ee44ea [ 9.435821] Adding 1969312k swap on /dev/zram0. Priority:-2 extents:1 across:1969312k SSFS [ 9.651535] uart-pl011 fe201000.serial: no DMA platform data [ 10.326946] random: crng init done [ 10.330419] random: 7 urandom warning(s) missed due to ratelimiting [ 11.675029] i2c /dev entries driver [ 12.065649] bcmgenet: Skipping UMAC reset [ 12.076021] bcmgenet fd580000.ethernet: configuring instance for external RGMII [ 12.088109] bcmgenet fd580000.ethernet eth0: Link is Down [ 12.138157] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled [ 12.674880] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled [ 15.078270] Bridge firewalling registered [ 15.167989] bcmgenet fd580000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 15.176363] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 16.414127] Bluetooth: Core ver 2.22 [ 16.417866] NET: Registered protocol family 31 [ 16.422395] Bluetooth: HCI device and connection manager initialized [ 16.428860] Bluetooth: HCI socket layer initialized [ 16.434540] Bluetooth: L2CAP socket layer initialized [ 16.439714] Bluetooth: SCO socket layer initialized [ 16.492318] Bluetooth: HCI UART driver ver 2.3 [ 16.497327] Bluetooth: HCI UART protocol H4 registered [ 16.502941] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 16.509479] Bluetooth: HCI UART protocol Broadcom registered [ 16.896421] br-d511e847fed1: port 1(veth2598d0d) entered blocking state [ 16.903235] br-d511e847fed1: port 1(veth2598d0d) entered disabled state [ 16.912558] device veth2598d0d entered promiscuous mode [ 16.920513] br-d511e847fed1: port 1(veth2598d0d) entered blocking state [ 16.927282] br-d511e847fed1: port 1(veth2598d0d) entered forwarding state [ 16.934792] br-d511e847fed1: port 1(veth2598d0d) entered disabled state [ 17.030486] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.037108] Bluetooth: BNEP filters: protocol multicast [ 17.042481] Bluetooth: BNEP socket layer initialized [ 17.630863] br-d511e847fed1: port 2(veth4f19e66) entered blocking state [ 17.637727] br-d511e847fed1: port 2(veth4f19e66) entered disabled state [ 17.645301] device veth4f19e66 entered promiscuous mode [ 17.651097] br-d511e847fed1: port 2(veth4f19e66) entered blocking state [ 17.657846] br-d511e847fed1: port 2(veth4f19e66) entered forwarding state [ 17.665324] br-d511e847fed1: port 2(veth4f19e66) entered disabled state [ 18.093014] br-d511e847fed1: port 3(vethd6ba57f) entered blocking state [ 18.099771] br-d511e847fed1: port 3(vethd6ba57f) entered disabled state [ 18.107183] device vethd6ba57f entered promiscuous mode [ 18.114009] br-d511e847fed1: port 3(vethd6ba57f) entered blocking state [ 18.120751] br-d511e847fed1: port 3(vethd6ba57f) entered forwarding state [ 18.127954] IPv6: ADDRCONF(NETDEV_CHANGE): br-d511e847fed1: link becomes ready [ 18.135613] br-d511e847fed1: port 3(vethd6ba57f) entered disabled state [ 21.105431] eth0: renamed from vethdb4750e [ 21.162004] eth0: renamed from vethd5bbd62 [ 21.201333] IPv6: ADDRCONF(NETDEV_CHANGE): veth4f19e66: link becomes ready [ 21.208481] br-d511e847fed1: port 2(veth4f19e66) entered blocking state [ 21.215224] br-d511e847fed1: port 2(veth4f19e66) entered forwarding state [ 21.223007] IPv6: ADDRCONF(NETDEV_CHANGE): veth2598d0d: link becomes ready [ 21.230303] br-d511e847fed1: port 1(veth2598d0d) entered blocking state [ 21.237048] br-d511e847fed1: port 1(veth2598d0d) entered forwarding state [ 21.302704] eth0: renamed from veth71a892c [ 21.320944] IPv6: ADDRCONF(NETDEV_CHANGE): vethd6ba57f: link becomes ready [ 21.328160] br-d511e847fed1: port 3(vethd6ba57f) entered blocking state [ 21.334889] br-d511e847fed1: port 3(vethd6ba57f) entered forwarding state [ 32.554290] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 32.562617] ext4 filesystem being mounted at /mnt/sysroot/inactive supports timestamps until 2038 (0x7fffffff) [ 35.455863] br-d511e847fed1: port 2(veth4f19e66) entered disabled state [ 35.462823] vethdb4750e: renamed from eth0 [ 35.576644] br-d511e847fed1: port 2(veth4f19e66) entered disabled state [ 35.601036] device veth4f19e66 left promiscuous mode [ 35.606750] br-d511e847fed1: port 2(veth4f19e66) entered disabled state [ 36.088938] br-d511e847fed1: port 2(vethfa74183) entered blocking state [ 36.096794] br-d511e847fed1: port 2(vethfa74183) entered disabled state [ 36.104186] device vethfa74183 entered promiscuous mode [ 36.110382] br-d511e847fed1: port 2(vethfa74183) entered blocking state [ 36.117155] br-d511e847fed1: port 2(vethfa74183) entered forwarding state [ 36.480310] br-d511e847fed1: port 2(vethfa74183) entered disabled state [ 37.553295] eth0: renamed from vethe98f463 [ 37.581499] IPv6: ADDRCONF(NETDEV_CHANGE): vethfa74183: link becomes ready [ 37.588719] br-d511e847fed1: port 2(vethfa74183) entered blocking state [ 37.595457] br-d511e847fed1: port 2(vethfa74183) entered forwarding state [ 38.665465] br-d511e847fed1: port 2(vethfa74183) entered disabled state [ 38.672481] vethe98f463: renamed from eth0 [ 38.828315] br-d511e847fed1: port 2(vethfa74183) entered disabled state [ 38.851077] device vethfa74183 left promiscuous mode [ 38.856331] br-d511e847fed1: port 2(vethfa74183) entered disabled state [ 39.377708] br-d511e847fed1: port 2(veth229fde3) entered blocking state [ 39.384482] br-d511e847fed1: port 2(veth229fde3) entered disabled state [ 39.392097] device veth229fde3 entered promiscuous mode [ 39.400936] br-d511e847fed1: port 2(veth229fde3) entered blocking state [ 39.407710] br-d511e847fed1: port 2(veth229fde3) entered forwarding state [ 39.680319] br-d511e847fed1: port 2(veth229fde3) entered disabled state [ 39.736310] Bluetooth: RFCOMM TTY layer initialized [ 39.741649] Bluetooth: RFCOMM socket layer initialized [ 39.747026] Bluetooth: RFCOMM ver 1.11 [ 40.806218] eth0: renamed from veth2ab1aa7 [ 40.829086] IPv6: ADDRCONF(NETDEV_CHANGE): veth229fde3: link becomes ready [ 40.836364] br-d511e847fed1: port 2(veth229fde3) entered blocking state [ 40.843090] br-d511e847fed1: port 2(veth229fde3) entered forwarding state root@569d0a627462:/usr/src# |
|
@arjan5340 well the good thing is it's actually recognising the soundcard now so that's progress at least! How are you trying to play music? Through Bluetooth or Spotify or something else? Can you open a terminal in the audio container and try Also can you try running If you could post some screenshots of the output as well that would be great! |
|
@arjan5340 could you also try just rebooting the device from the balenaCloud device management page first? |
|
Dear Shawaj, I use spotify as music streamer. When i try to do a speaker test no sound.
root@569d0a627462:/usr/src# speaker-test -c2 -t wav speaker-test 1.2.4 Playback device is default |
|
Dear Shawaj, c: Sink alsa_output.dac.stereo-fallback does not exist. |
|
@arjan5340 when you say it's not the default soundcard in alsamixer - what do you mean by this? What options are you presented with? |
|
Dear Shawaj, I mean this as follow. When i open Alsamixer the card is Pulseaudio. I can make the choice under F6 for my sound card and after select my sound card you see them. You see my sound card is select. But when i close Aslamixer and reopen Alsamixer my card is again Pulseaudio. Maybe it doesn't matter. Is this clear for you? |
|
@arjan5340 from the second screenshot it appears that the standard audio card is still loading. Bcm2835 one. It shouldn't be doing that with the audio=off setting. You know the changes you made to this, was that on the device itself? Or on the whole application? |
|
By the way, pulseaudio is correct one to be default. It is the system sound. So that's the master volume. It will always be that as default when you start to alsamixer |
|
I have make the changes in the device. (See screenshot) I have done a reboot again and again i see the message below. Is this the problem? |
|
@arjan5340 sorry it's a bit difficult to know because I don't have the exact soundcard here. So I'm guessing a bit. Also I can't find the exact pinout of the board either so there is maybe some setting I'm unaware of. Do you specifically need UART for anything? If not, can you click the delete button next to the "Enable / Disable UART"? Can you also go into device variables in the menu on the left hand side, and change the AUDIO_OUTPUT one to say DAC |
|
This might be interesting to try also #357 (comment) However, as I said I don't have a board to test it. |
|
I have made a fresh install of BalenaSound and start tomorrow from scratch. The first I do tomorrow is update the raspberry to the last kernel. Hope that make sense. I give you tomorrow a update. |
|
Dear shawaj, I have start from scratch but that make not sense. Below the information you asking for. Huge logroot@b998d39a2892:/usr/src# pactl list sinks Sink #1 Sink #2 Sink #3 Sink #4 root@b998d39a2892:/usr/src# dmesg | grep hifi root@b998d39a2892:/usr/src# dmesg | grep hifi root@b998d39a2892:/usr/src# aplay -lL Hope you can help me with this information |
|
Maybe this can help? |
|
@arjan5340 the weird thing is how it is still loading the bcm2835 system audio. Are you sure you have the "audio=off" set in the dtparams section? |
|
IT WORKS YES YES YES YES |
|
@arjan5340 awesome! I'm very glad to hear that. I was starting to get a bit annoyed that we couldn't get it to work haha. Thanks for all your help debugging. Makes it harder not having the device here :-) Enjoy your HiFiBerry and balenaSound setup! I'll leave this issue open for now until the PR is merged on the audio repo. |
|
Dear Aaron, Again thanks a lot. 2 of the 3 rasps work now i setup now the last one. |
|
All devices works perfectly. The sync was in the begin not very well after a couple of restarts works everything perfect. |
|
@arjan5340 glad to hear you are up and running and everything working nicely. Hope you have a great 2021 as well! |
|
Dear Aaron, After your update i have a little problem with multiroom playing. I have 3 raspberry but the multiroom doesn't work any more this morning. I have reboot the 3 devices without any succes. I delete the devices and install them again from scratch and use your patch also. But the multiroom function doesn't work. Do you have any idea's |
31.12.20 12:09:57 (+0100) spotify --autoplay autoplay similar songs when your music ends. |
|
Now i can't see the devices on spotify any more |
|
31.12.20 13:12:49 (+0100) Failed to download image 'registry2.balena-cloud.com/v2/5bb6966706680ddac2361d7d57331a98@sha256:0d7c592579307e9e4dab42b9403407aad9ac50bcbb39f8039ffc6435a3a20b2a' due to 'failed to register layer: Error processing tar file(exit status 1): write /lib/udev/rules.d/60-block.rules: no space left on device' I think above is the problem how can i clean my hole rasp? and start again |
|
Don't the file edits disappear after restarting the container? I added the lines, restarted the container, everything appears to be working, but when I went to checkout the same file, my edits were gone. 🤷 |
|
@richardpringle yes unfortunately that is the case until the changes are pulled in. @arjan5340 your first issue seems to be related to #387 / #386 The second one seems to be that your SD card is full. Perhaps you have a larger sd card or can wipe that one and start again? |
it has been determined that there are errors in the 91 rules file. by pulseaudio rpi2. this should solve the problem |
|
@aandroide where are you seeing these issues? Is there a PR somewhere you can refer to? |
|
https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/issues/1082#note_739409 |
|
@aandroide how does this relate to the hifiberry dac hd2 not working? I can't see how it relates? It seems to be a different issue? |
I'm just reporting that whoever has the image of december buster and therefore pulseaudio updated will surely have problems due to an error in the 91 rules file. in my case I had a google voice hat and I solved the problem by making the changes declared before. mine is just a suggestion and not a problem here. |
|
@aandroide ahh I see - ok thanks for the heads up. We don't use Raspberry Pi OS because this runs on balenaOS which is yocto based. So not sure we will be affected by this. We don't have a file at |
|
@arjan5340 @richardpringle the audio block repo is now updated with the latest images. Could you try rebuilding and pushing? https://hub.docker.com/r/balenablocks/audio/tags?page=1&ordering=last_updated |
|
Seems to be working for me:
|
|
@arjan5340 has confirmed in this thread that it is now working balena-io-experimental/audio#48 So closing this issue now. |
add link to issue where debugging for dac2 hd occured and was subsequently fixed Change-type: patch Connects-to: #377 Signed-off-by: Aaron Shaw <aaron@balena.io>
- update the unicode quotes to ascii so copy and paste works - add link to dac2 hd debugging issue - add link to issue where debugging for dac2 hd occured and was subsequently fixed - add screenshot and description of alternative dt overlay option Connects-to: #377 Change-type: patch Signed-off-by: Aaron Shaw <aaron@balena.io>
- update the unicode quotes to ascii so copy and paste works - add link to dac2 hd debugging issue - add link to issue where debugging for dac2 hd occured and was subsequently fixed - add screenshot and description of alternative dt overlay option Connects-to: #377 Change-type: patch Signed-off-by: Aaron Shaw <aaron@balena.io>
- update the unicode quotes to ascii so copy and paste works - add link to dac2 hd debugging issue - add link to issue where debugging for dac2 hd occured and was subsequently fixed - add screenshot and description of alternative dt overlay option Connects-to: #377 Change-type: patch Signed-off-by: Aaron Shaw <aaron@balena.io>
Dear,
I use a raspberry pi 4 and deploy with Balena. When i use the jack plug i have sound. When i install the hardware Hifiberry DAC HD2 on top of the raspberry and i make a new custom variable BALENA_HOST_CONFIG_dtoverlay with value hifiberry-dacplushd. Reboot the raspberry and i have no sound. Please can anybody told me what i doing wrong. Thanks
The text was updated successfully, but these errors were encountered: