Update qgl.cfg #553
Merged
Update qgl.cfg #553
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Format with _ so a space is in the name, like other temps
Update rpi_temp.cfg
Replace M204 with SET_VELOCITY_LIMIT
ksummers92
added a commit
to ksummers92/klippain
that referenced
this pull request
Mar 21, 2024
* make Klippain compatible with HH v2.5 * start print for HH > v2.5 * move HHv2.5 init in _KLIPPAIN_MMU_INIT * add some info in mmu.md for 2.5 * add sync fonction with HH>2.5 * add eject slicer option for HH>2.5 * typo error * Update end_print.cfg Change EJECT to boolean for MMU_END * show HH version on startup * added custom4..9 in start_print (Frix-x#539) * updated beeper sections (Frix-x#549) by switching to pwm_cycle_time instead of output pin * removed M204 in favor of SET_VELOCITY_LIMIT (Frix-x#555) * support for LDO Picobilical (Frix-x#533) * removed M204 for SET_VELOCITY_LIMIT (Frix-x#554) * removed last M204 for SET_VELOCITY_LIMIT (Frix-x#553) * added Beacon accelerometer support (Frix-x#552) * deprecate HH<v2.5 and small typos * removed old artifacts from TMC2240 init feature Please use https://github.com/andrewmcgr/klipper_tmc_autotune instead! * error on changes in _INIT_CHECK_MMU --------- Co-authored-by: Benoitone <63300355+Benoitone@users.noreply.github.com> Co-authored-by: Félix Boisselier <felix@fboisselier.fr> Co-authored-by: Jan-Gerrit Drexhage <102791900+Surion79@users.noreply.github.com> Co-authored-by: Colten Edwards <cd.edwards@sasktel.net> Co-authored-by: Nick Danyluk <ndanyluk7@gmail.com> Co-authored-by: Svennixx <xsvenhd@hotmail.com>
ksummers92
added a commit
to ksummers92/klippain
that referenced
this pull request
Jun 22, 2024
* Fysetc Catalyst Config * added respond on idle_timeout * sherpa mini config (Frix-x#385) Co-authored-by: Félix Boisselier <felix@fboisselier.fr> * switch moonraker update management to dev channel (Frix-x#390) * Update orbiter2.0.cfg (Frix-x#405) Add comment about required current. At the default of 0.45 on the Orbiter 2 motor, very poor performance will occur including significant underextrusion on infill, etc. * chore(mcu): properly label CAN H/L (Frix-x#418) TX and RX are not helpful, looking at the back of the m8p v2 shows that RX is high, and TX is low. * added back the proper idle timeout behavior * BTT S2DW V1.0 and similar RP2040 + lis2dw boards (Frix-x#439) * Add Octopus Pro 1.0 MCU definition as duplicate of Octopus MCU * fix typo in BTT_Octopus_Pro_v1.1.cfg (Frix-x#460) * Turn on filter only if it was used during printing. (Frix-x#380) Co-authored-by: Jan-Gerrit Drexhage <102791900+Surion79@users.noreply.github.com> * added parameters to park (Frix-x#391) * M8P v2.0 SPI fix (Frix-x#389) Co-authored-by: Félix Boisselier <felix@fboisselier.fr> * Add per material filament sensor management (Frix-x#381) * Remove _TIP_SHAPING from End/cancel print macros (Frix-x#357) Co-authored-by: Jan-Gerrit Drexhage <102791900+Surion79@users.noreply.github.com> Co-authored-by: Félix Boisselier <felix@fboisselier.fr> * Klipper SET_PRINT_STATS_INFO compatibility (Frix-x#392) Co-authored-by: Félix Boisselier <felix@fboisselier.fr> * Fix error with turning on filter only if it was used during printing. (Frix-x#406) Fix issue discovered after merging Frix-x#380 * fix missing variable to cancel_print (Frix-x#408) * filament sensor status checks universal (Frix-x#411) * proper Shake&Tune integration in Klippain * add mellow SB2040 v2 and SB2040 Pro toolhead boards (Frix-x#417) * correct overriders misspelling (Frix-x#425) * check if heatsoak is configured to verbose message (Frix-x#424) * typo * Add pin definitions for Fysetc S6 V2.X * add TR8x2 leadscrew config for trident * Add older version of Fysetc mini12864 display * HappyHare & other related dev (Frix-x#371) * HappyHare MMU integration in Klippain * Spoolman support * Multiple MCU templates added or modified, especially MMU templates * LED system rework to support the LED_effects plugin and rainbow barf, etc... ( Frix-x#416 ) * TMC Autotune moonraker updater predefined config (add your motor defs to your overrides.cfg or mcu.cfg) --------- Co-authored-by: Jan-Gerrit Drexhage <102791900+Surion79@users.noreply.github.com> Co-authored-by: claudioguareschi <33001685+claudioguareschi@users.noreply.github.com> Co-authored-by: Félix Boisselier <felix@fboisselier.fr> Co-authored-by: ksummers92 <66363414+ksummers92@users.noreply.github.com> * fix status leds at startup (Frix-x#448) * Status leds on startup fix * display menu and V0 Display (Frix-x#420) * Better display menu adapted to Klippain * V0 display support * Klippain boot logo --------- Co-authored-by: Elias Huwyler <elias.huwyler@ti8m.ch> * improved display management structure * fixed MMU includes for HappyHare symlink * Add BLTouch support (Frix-x#450) * fixed nozzle and status led on/off. (Frix-x#454) * reverted update manager to main branch * followed naming scheme for bltouch include as virtual * moved the machine.cfg include and included additional thermistor defs * Mellow fly super8 template (Frix-x#463) * Support for TMC5160 on Z Axis (Frix-x#469) * added fix to prevent issues when updating Klippain without MMU (Frix-x#462) * Add configs for Fysetc SB Can TH boards (Frix-x#464) Co-authored-by: Félix Boisselier <felix@fboisselier.fr> * fix: make prime line height a variable parameter (Frix-x#466) Fix Frix-x#465 * fix for extrude when temperature is too low (Frix-x#480) * Add BTT Kraken MCU support (Frix-x#476) * Update Fysetc_Spider_v3.x.cfg to fix fan ports (Frix-x#474) * fix BTT_MMB pin (Frix-x#486) * added fix for rsense for TMC5160 (Frix-x#489) * Add support for dockable probes with separate retainer (Frix-x#401) This is needed for probes like https://github.com/kevinakasam/KlackEnder-Probe * fix for rsense on TMC5160 Z (Frix-x#490) * Create stale action workflow (Frix-x#449) Co-authored-by: Félix Boisselier <felix@fboisselier.fr> * fixed K-Shake&Tune integration * Avoid cooling hotend in extruder_preheating Frix-x#495 (Frix-x#496) * Add a park front macro for toolhead maintenance (Frix-x#494) * Update MMU include order to allow overriding default HH defs (Frix-x#497) * avoid led effect flashing on startup if leds desabled on startup (Frix-x#500) * Added BTT SKR2 board template (Frix-x#503) * fixed the regression introduced in startup call * fix typo in stale.yml * fixed probe pin for BTT_SB2209_RP2040_v1.0 (Frix-x#507) * LDO Nitehawk MCU template and tachometer management (Frix-x#505) Co-authored-by: Meindert <19568018+mvdveer@users.noreply.github.com> Co-authored-by: Akash Patel <akashrpatel@yahoo.com> * update primeline to make it adaptive (Frix-x#498) Co-authored-by: Frédéric Beaucamp <88246672+fbeauKmi@users.noreply.github.com> Co-authored-by: Félix Boisselier <felix@fboisselier.fr> * fixed missing adaptive primeline variable * remplaced CANCEL_PRINT by PARK in the automated error management gcode * fixed typo in LDO Nitehawk manufacturer template * Add support for Manta_M5P v1.0 and 0.9 degree steppers on Trident Z axis (Frix-x#514) * fix homing check for PARK in error gcode (Frix-x#513) * fix typo in Fysetc_ERCF_ERB.cfg (Frix-x#519) * Update BTT_Kraken_v1.0.cfg, RGB1 fix listed as PF10, but should be PF12 (pf10 is mcu_min7 already, an endstop) verified rest of pins as well * reverted PARK and PARK_FRONT to fail if axis are not homed * fix PARK with overriden param E (Frix-x#515) * install and uninstall scripts improvement (Frix-x#511) * Don't fail uninstall if the backup folder has been removed * Make uninstall work when backup has sub-directories * Make sure we don't fail making a backup when there is no current user config folder * added Mellow Fly Gemini v3 MCU template (Frix-x#527) * fix pinout for Fysetc_ERB board (Frix-x#530) * updated homing_override to improve sensorless homing (Frix-x#531) by using M400 vs the old 2 second dwell time that is not required anymore * fixed v0_display pin and improved overrides docs (Frix-x#535) * Update rpi_temp.cfg Format with _ so a space is in the name, like other temps * Update cabinet_temp.cfg * switched to the new minimum_cruise_ratio Klipper parameter * commented the default minimum_cruise_ratio to not break older Klipper versions * added Beacon accelerometer support (Frix-x#552) * Happy hare v2.5 merge (#8) * make Klippain compatible with HH v2.5 * start print for HH > v2.5 * move HHv2.5 init in _KLIPPAIN_MMU_INIT * add some info in mmu.md for 2.5 * add sync fonction with HH>2.5 * add eject slicer option for HH>2.5 * typo error * Update end_print.cfg Change EJECT to boolean for MMU_END * show HH version on startup * added custom4..9 in start_print (Frix-x#539) * updated beeper sections (Frix-x#549) by switching to pwm_cycle_time instead of output pin * removed M204 in favor of SET_VELOCITY_LIMIT (Frix-x#555) * support for LDO Picobilical (Frix-x#533) * removed M204 for SET_VELOCITY_LIMIT (Frix-x#554) * removed last M204 for SET_VELOCITY_LIMIT (Frix-x#553) * added Beacon accelerometer support (Frix-x#552) * deprecate HH<v2.5 and small typos * removed old artifacts from TMC2240 init feature Please use https://github.com/andrewmcgr/klipper_tmc_autotune instead! * error on changes in _INIT_CHECK_MMU --------- Co-authored-by: Benoitone <63300355+Benoitone@users.noreply.github.com> Co-authored-by: Félix Boisselier <felix@fboisselier.fr> Co-authored-by: Jan-Gerrit Drexhage <102791900+Surion79@users.noreply.github.com> Co-authored-by: Colten Edwards <cd.edwards@sasktel.net> Co-authored-by: Nick Danyluk <ndanyluk7@gmail.com> Co-authored-by: Svennixx <xsvenhd@hotmail.com> * Align hardware/mmu.cfg with upstream * Update nozzle brushing to accomodate offset for situations in which standard nozzle brushing parameters lead to undesired interactions. * Modify starting move prior to brush procedure to accomodate for brush_offset * Fix brush center calculation * Add some debugging messages * ??? * Fixed brush stroke maths * Removed unneccessary if statement * Update Shake&Tune path This is due to a change in Shake&Tune v3.0.0 --------- Co-authored-by: Surion79 <102791900+Surion79@users.noreply.github.com> Co-authored-by: Félix Boisselier <felix@fboisselier.fr> Co-authored-by: Benoitone <63300355+Benoitone@users.noreply.github.com> Co-authored-by: Eric <saericzimmerman@gmail.com> Co-authored-by: Devon Hazelett <dhazelett@users.noreply.github.com> Co-authored-by: Gustavo Ribeiro Alves <145077902+gralves2@users.noreply.github.com> Co-authored-by: Andrew Wickham <andrewwickham@westfieldgrp.com> Co-authored-by: tehniemer <jrniemand@gmail.com> Co-authored-by: Arsène Thieffry <arsene.thieffry@gmail.com> Co-authored-by: claudioguareschi <33001685+claudioguareschi@users.noreply.github.com> Co-authored-by: Elias Huwyler <elias.huwyler@gmail.com> Co-authored-by: Elias Huwyler <elias.huwyler@ti8m.ch> Co-authored-by: Neil Smith <8648114+nmsmith22389@users.noreply.github.com> Co-authored-by: Reiner Uhry <24939566+reineruhry@users.noreply.github.com> Co-authored-by: lokiagent <75763148+lokiagent@users.noreply.github.com> Co-authored-by: Arcadien <aurelien.labrosse@gmail.com> Co-authored-by: Tyler Olson <tolson@dlinc.io> Co-authored-by: Felix Boisselier <f.boisselier@irepa-laser.com> Co-authored-by: elpopo <68954733+elpopo-eng@users.noreply.github.com> Co-authored-by: tsk-2222 <111063724+tsk-2222@users.noreply.github.com> Co-authored-by: Meindert <19568018+mvdveer@users.noreply.github.com> Co-authored-by: Akash Patel <akashrpatel@yahoo.com> Co-authored-by: Frédéric Beaucamp <88246672+fbeauKmi@users.noreply.github.com> Co-authored-by: Birkemosen <Birkemosen@users.noreply.github.com> Co-authored-by: Magne Rasmussen <magne.rasmussen@gmail.com> Co-authored-by: Parker <infowolfe@gmail.com> Co-authored-by: Svennixx <xsvenhd@hotmail.com> Co-authored-by: Colten Edwards <cd.edwards@sasktel.net> Co-authored-by: Nick Danyluk <ndanyluk7@gmail.com>
ksummers92
added a commit
to ksummers92/klippain
that referenced
this pull request
Jun 22, 2024
* check test * check mmu * test * check * check * check mmu startup * macros * macros * macros * printer.cfg update only for LGX Heavy for MMU * orbiter2.0 mmu * changes * MMU specific mcu config * readme * moonraker * update printer.cfg for mmu extruders sections * typo * moonraker * typo * readme update * typo * MMU_HOME * check for mmu synch with extruder in prime line and swap * add CHECK_GATES optional parameter in start_print * unload at end for mmu * new HHv2 extruder modifications. You must review extruder section of printer.cfg and run Happy-Hare/install.sh script!!! * typo * changes on boards templates * Add configuration for BTT SKR Pro v1.2 and use of BTT SKR Pico v1.0 as mmu controller * Update calibrate.cfg Update to accommodate use of MMU. * Update base.conf Removed update manager for Klippain from base.conf to put in moonraker.conf to be editable. * Update install.sh * Updated start_print macro to put mmu stuff in modules. Removed mmu toolhead loading from extruder heating because one may like to wait to load until later. Updated end_print macro to save mmu_ready variable to 0 after eject. * Accidentally put "else if" instead of "elif". * for develop HHv2 * Update start_print.cfg Change mmu ready variable to save in macro and call from macro instead of save variables. * Update end_print.cfg * Update start_print.cfg Put ready variable in _MODULE_MMU_READY in the right place. * Update start_print.cfg Capitalize False? * Another attempt to get mmu to load in start print. * merge develop into Happy_Hare * Remove MMU_PREP reference. * readme * typo * typo * typo * Update README.md * Update mmu.md * Update mmu.md * Update configuration.md * Update mmu.md * Update README.md * Update mmu.md * Update README.md * Update README.md * Update README.md * Update README.md * Update Tircown_ERCF_easy_brd.cfg * Update Fysetc_ERCF_ERB.cfg * Update Mellow_fly_ERCF.cfg * add servo and comments in skr_Mini_E3 mcu * add servo in template mcu for spider board * add xyz check in park macro * Update park.cfg typo * test for PARK macro * startup * add Spider 3.0 and EBB2209_Can_RP2040 boards into happy_hare * add BTT MMB CAN Board and simplification of mmu templates * test for park * info on extruder retraction in PARK macro * Update park.cfg * cancel park mod and changes for the mmu_error_check in start print * rename ercf to mmu in variables * btt rp2040 * remove completly ercf name in variable * test error check * check gate to True by default on variables.cfg * configuration.md * Update variables.cfg * changes to only check mmu initial tool * typos * mmu.md adds * mmu doc * add check for new/rename mmu variables in variables.cfg * doc * test * upload image * update mmu.md * update comment * startup * remove check tool * Work for loading filament only if need... * typo correction * typo * some messges improvement * typo * color test * first commit * for bypass * test with check all gates * bypass * start_detection * test * test * test * test * ok? * typo * Update startup.cfg * Update mmu.cfg * Update startup.cfg * test * test2 * print_start_detection not forced * test * test * test * test * test * info * start check1 * bypass doc * 2 * info * base.conf * New HHv2 Hardware * comment mcu * mmu doc update * changes in start_print.cfg for new vesion of HHv2 extruder * Typos * mmu doc * first test for mmu errors * config start_print * error * doc * load bypass * merge from * start print mod * use new print_start_detection * doc * typo * typo * typo * test * test * test3 * ok * Correction for typo errors and test some print_start MMU * Some adjustment + first try Spoolman * typo 1 * typo 2 * test * typo * typo2 * ok * canceled * typo correction * typo * little bug * minor bug + hidden mmu_check_state * add hiden mmu_check_state * test tool used * Tool_use check * prevent bug if check gate and gate marked empty in HH * simplification 1 * typo * changes in MMU start_print * error * error? * install script * install.sh * typo * fix errors without mmu * fix error without mmu * missing mmu * missing mmu * zut * temp * reverse changes * remove option to sync mmu extruder in gcode print_start * doc * remove Sync mmu extruder from option in start print gcode * typo * typo * info check * added Ocotpus Pro v1.1 template (Frix-x#349) * changes * always desactivate clog detection for primelin * change readme for correct beta branch * Fixed start_print to merge * Another fix * remove and rename * typo * Update install.sh * Added LDO Nitehawk toolhead board configuration * Update LDO Nitehawk pin names to match pin diagram. Added LDO Nitehawk toolhead mcu template * Fixed missing comma * Fixed erroneous - sign * Happy hare v2.5 merge (#8) * make Klippain compatible with HH v2.5 * start print for HH > v2.5 * move HHv2.5 init in _KLIPPAIN_MMU_INIT * add some info in mmu.md for 2.5 * add sync fonction with HH>2.5 * add eject slicer option for HH>2.5 * typo error * Update end_print.cfg Change EJECT to boolean for MMU_END * show HH version on startup * added custom4..9 in start_print (Frix-x#539) * updated beeper sections (Frix-x#549) by switching to pwm_cycle_time instead of output pin * removed M204 in favor of SET_VELOCITY_LIMIT (Frix-x#555) * support for LDO Picobilical (Frix-x#533) * removed M204 for SET_VELOCITY_LIMIT (Frix-x#554) * removed last M204 for SET_VELOCITY_LIMIT (Frix-x#553) * added Beacon accelerometer support (Frix-x#552) * deprecate HH<v2.5 and small typos * removed old artifacts from TMC2240 init feature Please use https://github.com/andrewmcgr/klipper_tmc_autotune instead! * error on changes in _INIT_CHECK_MMU --------- Co-authored-by: Benoitone <63300355+Benoitone@users.noreply.github.com> Co-authored-by: Félix Boisselier <felix@fboisselier.fr> Co-authored-by: Jan-Gerrit Drexhage <102791900+Surion79@users.noreply.github.com> Co-authored-by: Colten Edwards <cd.edwards@sasktel.net> Co-authored-by: Nick Danyluk <ndanyluk7@gmail.com> Co-authored-by: Svennixx <xsvenhd@hotmail.com> * Align hardware/mmu.cfg with upstream * Update nozzle brushing to accomodate offset for situations in which standard nozzle brushing parameters lead to undesired interactions. * Modify starting move prior to brush procedure to accomodate for brush_offset * Fix brush center calculation * Add some debugging messages * ??? * Fixed brush stroke maths * Removed unneccessary if statement * Attempt to merge main in HH (#12) * Update install.sh * Added Fysetc Cheetah V2 to mcu_definitions * Change moonraker Klippain update manager * Create SKR Pico+Cheetah mcu_definitions * Added picobilicial mcu_definitions * Upstream main (#9) * Further parameterize nozzle brush variables * Update brush_center_offset.md * Fix default brush size * Added default values to nozzle_cleaning.cfg * Update Shake&Tune path This is due to a change in Shake&Tune v3.0.0 * fixed max_z bug in PARK macro * Update BTT_SKR_2.cfg to fix EXP1_4 typo (Frix-x#578) * Nozzle cleaning parameters update (Frix-x#569) * add built in adxl sensor from nitehawk sb board (Frix-x#602) * add: mcu Fystec Cheetah v3 (Frix-x#604) --------- Co-authored-by: Félix Boisselier <felix@fboisselier.fr> Co-authored-by: tsk-2222 <111063724+tsk-2222@users.noreply.github.com> Co-authored-by: dev-aphex <dev-aphex@users.noreply.github.com> Co-authored-by: Minims <github@minims.fr> --------- Co-authored-by: Félix Boisselier <felix@fboisselier.fr> Co-authored-by: tsk-2222 <111063724+tsk-2222@users.noreply.github.com> Co-authored-by: dev-aphex <dev-aphex@users.noreply.github.com> Co-authored-by: Minims <github@minims.fr> --------- Co-authored-by: Benoitone <63300355+Benoitone@users.noreply.github.com> Co-authored-by: Benoitone <benoitonepub@gmail.com> Co-authored-by: Jan-Gerrit Drexhage <102791900+Surion79@users.noreply.github.com> Co-authored-by: Félix Boisselier <felix@fboisselier.fr> Co-authored-by: Colten Edwards <cd.edwards@sasktel.net> Co-authored-by: Nick Danyluk <ndanyluk7@gmail.com> Co-authored-by: Svennixx <xsvenhd@hotmail.com> Co-authored-by: tsk-2222 <111063724+tsk-2222@users.noreply.github.com> Co-authored-by: dev-aphex <dev-aphex@users.noreply.github.com> Co-authored-by: Minims <github@minims.fr>
tehniemer
added a commit
to tehniemer/klippain
that referenced
this pull request
Aug 22, 2024
* added custom4..9 in start_print (Frix-x#539) * updated beeper sections (Frix-x#549) by switching to pwm_cycle_time instead of output pin * removed M204 in favor of SET_VELOCITY_LIMIT (Frix-x#555) * support for LDO Picobilical (Frix-x#533) * removed M204 for SET_VELOCITY_LIMIT (Frix-x#554) * removed last M204 for SET_VELOCITY_LIMIT (Frix-x#553) * removed old artifacts from TMC2240 init feature Please use https://github.com/andrewmcgr/klipper_tmc_autotune instead! * Message update to show "Available RAM" rather than "Used RAM" (Frix-x#579) * fixed max_z bug in PARK macro * Update BTT_SKR_2.cfg to fix EXP1_4 typo (Frix-x#578) * added a fix for filament sensor activation for material as default (Frix-x#582) * code cleanup in some templates (removed extra spaces) (Frix-x#570) * Nozzle cleaning parameters update (Frix-x#569) * add expander templates support (Frix-x#567) with Klipper expander and Arduino nano templates as first expanders * Reset layers stats on start print (Frix-x#565) * optional setting for adaptive primeline (Frix-x#522) * fix typo in qgl.cfg * added AWD support (2x X, 2x Y) (Frix-x#508) * add built in adxl sensor from nitehawk sb board (Frix-x#602) * Update LDO_Nitehawk-SB_v1.0.cfg (Frix-x#594) * add: mcu Fystec Cheetah v3 (Frix-x#604) * fixed default pins for SB2209 v1.0 (Frix-x#609) * added function for pause at (next) layer (Frix-x#606) * Add FYSETC Nozzle-Input-Shaper accelerometer support (Frix-x#603) --------- Co-authored-by: Félix Boisselier <felix@fboisselier.fr> Co-authored-by: Jan-Gerrit Drexhage <102791900+Surion79@users.noreply.github.com> Co-authored-by: Colten Edwards <cd.edwards@sasktel.net> Co-authored-by: Nick Danyluk <ndanyluk7@gmail.com> Co-authored-by: Christian Johnson <cjohnson-phys@users.noreply.github.com> Co-authored-by: tsk-2222 <111063724+tsk-2222@users.noreply.github.com> Co-authored-by: o1hitman1o <o1hitman1o@gmail.com> Co-authored-by: ksummers92 <66363414+ksummers92@users.noreply.github.com> Co-authored-by: Benoitone <63300355+Benoitone@users.noreply.github.com> Co-authored-by: dev-aphex <dev-aphex@users.noreply.github.com> Co-authored-by: Minims <github@minims.fr>
tehniemer
added a commit
to tehniemer/klippain
that referenced
this pull request
Aug 22, 2024
* added custom4..9 in start_print (Frix-x#539) * updated beeper sections (Frix-x#549) by switching to pwm_cycle_time instead of output pin * removed M204 in favor of SET_VELOCITY_LIMIT (Frix-x#555) * support for LDO Picobilical (Frix-x#533) * removed M204 for SET_VELOCITY_LIMIT (Frix-x#554) * removed last M204 for SET_VELOCITY_LIMIT (Frix-x#553) * removed old artifacts from TMC2240 init feature Please use https://github.com/andrewmcgr/klipper_tmc_autotune instead! * Message update to show "Available RAM" rather than "Used RAM" (Frix-x#579) * fixed max_z bug in PARK macro * Update BTT_SKR_2.cfg to fix EXP1_4 typo (Frix-x#578) * added a fix for filament sensor activation for material as default (Frix-x#582) * code cleanup in some templates (removed extra spaces) (Frix-x#570) * Nozzle cleaning parameters update (Frix-x#569) * add expander templates support (Frix-x#567) with Klipper expander and Arduino nano templates as first expanders * Reset layers stats on start print (Frix-x#565) * optional setting for adaptive primeline (Frix-x#522) * fix typo in qgl.cfg * added AWD support (2x X, 2x Y) (Frix-x#508) * add built in adxl sensor from nitehawk sb board (Frix-x#602) * Update LDO_Nitehawk-SB_v1.0.cfg (Frix-x#594) * add: mcu Fystec Cheetah v3 (Frix-x#604) * fixed default pins for SB2209 v1.0 (Frix-x#609) * added function for pause at (next) layer (Frix-x#606) * Add FYSETC Nozzle-Input-Shaper accelerometer support (Frix-x#603) --------- Co-authored-by: Félix Boisselier <felix@fboisselier.fr> Co-authored-by: Jan-Gerrit Drexhage <102791900+Surion79@users.noreply.github.com> Co-authored-by: Colten Edwards <cd.edwards@sasktel.net> Co-authored-by: Nick Danyluk <ndanyluk7@gmail.com> Co-authored-by: Christian Johnson <cjohnson-phys@users.noreply.github.com> Co-authored-by: tsk-2222 <111063724+tsk-2222@users.noreply.github.com> Co-authored-by: o1hitman1o <o1hitman1o@gmail.com> Co-authored-by: ksummers92 <66363414+ksummers92@users.noreply.github.com> Co-authored-by: Benoitone <63300355+Benoitone@users.noreply.github.com> Co-authored-by: dev-aphex <dev-aphex@users.noreply.github.com> Co-authored-by: Minims <github@minims.fr>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Replace M204 with SET_VELOCITY_LIMIT