Blitzwolf SHP7
Blitzwolf SHP7 is a smart plug, featuring:
- two remotely controllable sockets
- power metering
By default, it runs Tuya proprietary firmware.
Provisioning configuration name: espqtoggle/blitzwolf/shp7.
- flash mode: DOUT
- flash frequency: 40MHz
| Number | Function | Remarks |
|---|---|---|
| 0 | push button 1 | active low |
| 1 | status LED | active low |
| 2 | on/off LED 2 | active low |
| 3 | BL0937 SEL | |
| 4 | BL0937 CF | |
| 5 | BL0937 CF1 | |
| 12 | push button 2 | |
| 13 | on/off LED 1 | active low |
| 14 | relay 2 | active high |
| 16 | relay 1 | active high |
| Id | Type | Description | Range/Unit | Remarks |
|---|---|---|---|---|
push_button1 |
boolean | on/off button 1, setup button | ||
push_button2 |
boolean | on/off button 2 | ||
led1 |
boolean | on/off LED 1 | ||
led2 |
boolean | on/off LED 2 | ||
relay1 |
boolean | relay 1 | ||
relay2 |
boolean | relay 2 | ||
active_power |
number | active power | W | needs calibration |
energy |
number | energy | Wh | needs calibration |
current |
number | current | A | needs calibration |
voltage |
number | voltage | V | needs calibration |
power_calib |
number | power & energy calibration factor | ||
voltage_calib |
number | voltage calibration factor | ||
current_calib |
number | current calibration factor | ||
apparent_power |
number | apparent power | VA | |
power_factor |
number | power factor | 0..100 % |
Follow the Tuya Convert OS procedure.
You can now power your device by connecting it to mains. Follow the initial setup instructions to connect the device to Wi-Fi and add it to your qToggle system.