Blitzwolf SHP10

• Device
  • Description
  • Configuration
  • Flash Parameters
  • Pins
  • Ports
• Installation
• Next Steps

---

Device

Description

Blitzwolf SHP10 is a smart plug, featuring:

• one remotely controllable socket
• power metering (only model POA6204582)

By default, it runs Tuya proprietary firmware.

Following models are available:

• POA6204581
• POA6204582 (with power metering)

Configuration

Provisioning configuration names:

• espqtoggle/blitzwolf/shp10
• espqtoggle/blitzwolf/shp10/pm

Flash Parameters

• flash mode: DOUT
• flash frequency: 40MHz

Pins

Number	Function	Remarks
1	BL0940 RX	only for POA6204582 model
3	BL0940 TX	only for POA6204582 model
4	status LED	active low
5	relay	active high
13	push button	active low

Ports

Id	Type	Description	Range/Unit	Remarks
push_button	boolean	on/off button, setup button
relay	boolean	relay
active_power	number	active power	W	only for POA6204582 model
energy	number	energy	Wh	only for POA6204582 model
current	number	current	A	only for POA6204582 model
voltage	number	voltage	V	only for POA6204582 model
temperature	number	temperature	°C	only for POA6204582 model
apparent_power	number	apparent power	VA	only for POA6204582 model
power_factor	number	power factor	0..100 %	only for POA6204582 model

Installation

Follow the Tuya Convert OS procedure.

Next Steps

You can now power your device by connecting it to mains. Follow the initial setup instructions to connect the device to Wi-Fi and add it to your qToggle system.