ChipKIT MAX32 Bluetooth

Shortly I will add a Max32 Setup guide with added links to Bill of Materials for each setup.

Some things that need proper documentation:

Need a source for the metric bolts to connect both the Network Shield and Max32 together.

Need sizing for spacers

Parts List - Originally from OpenXCPlatform site.

• BlueSMiRF Module

• Angled connector pins OR jumper cables soldered directly to the BlueSMiRF

• Digilent chipKIT Max32 Microcontroller

• Digilent chipKIT Network Shield

• OBD-II Male to Breakout Cable

• (3x) 2x6 Crimp Connector Housings

• (4x) Female crimp pins from Pololu

• (1x) Male crimp pin from Pololu

• Shrink tubing

• Rubber cable grommet that fits the OBD-II cable (HomeDepot has a few but they are not quite small enough,

• adding an additional amount of shrink tubing can make up the difference for this.)

• Optional - Enclosure from PacTec

• Optional - Mounting spacers for use with the enclosure (Home Depot has some that fit quite well)

Tools List

This is a list of the tools needed to assemble the kit.

1. Wire stripper

2. Wire crimper

3. Heat gun (or lighter)

4. Multimeter for continuity testing

5. Optional - label maker

6. For the suggested enclosure, you'll also need the following:

7. Angle cutters

8. Phillips head screw driver

9. Tools for etching and cutting plastic - Radio Shack has a solder kit that can do this, but it's cleaner to use a proper drill and small saw.

10. Drill