Support api_config_source without cluster_names #2860
Comments
|
I think what we want to do as well is allow |
htuch
pushed a commit
that referenced
this issue
Apr 6, 2018
To support the deprecation of cluster_names in the api_config_source (#2860), I added a more verbose error in utility.cc for GRPC api_config_sources with any named clusters hunted down places in tests where api_config_source.cluster_names()[0] was implicitly used (assuming that API would be GRPC and would have cluster names). renamed factoryForApiConfigSource to factoryForGrpcApiConfigSource, as it already implicitly returns a Grpc::AsyncClientFactoryPtr, and gave a more verbose error for when the user passes a config with cluster_names set. separated out checkApiConfigSourceSubscriptionBackingCluster into checkApiConfigSourceNames, which does the gRPC services v. cluster names validation, and checkApiConfigSourceSubscriptionBackingCluster, which actually validates the cluster name against the clusters map. more completely covered the tests for the branching cases for non-gRPC API configs which happened to have grpc services defined. Risk Level: Low Testing: bazel test test/... all passed. Fixed #2680 Fixed #2902 Signed-off-by: James Buckland <jbuckland@google.com>
|
Fixed in #2999. |
htuch
pushed a commit
that referenced
this issue
Apr 11, 2018
This reverts #3018, which reverted #2999. Therefore this PR is similar to #2999, except that 77b292c allows REST/gRPC config mismatch errors to warn instead of throwing an error. Hopefully this solves the issue for users who were unable to roll forward their binaries while keeping the same config. Changelist for #2999: To support the deprecation of cluster_names in the api_config_source (#2860), I added a more verbose error in utility.cc for GRPC api_config_sources with any named clusters hunted down places in tests where api_config_source.cluster_names()[0] was implicitly used (assuming that API would be GRPC and would have cluster names). renamed factoryForApiConfigSource to factoryForGrpcApiConfigSource, as it already implicitly returns a Grpc::AsyncClientFactoryPtr, and gave a more verbose error for when the user passes a config with cluster_names set. separated out checkApiConfigSourceSubscriptionBackingCluster into checkApiConfigSourceNames, which does the gRPC services v. cluster names validation, and - checkApiConfigSourceSubscriptionBackingCluster, which actually validates the cluster name against the clusters map. more completely covered the tests for the branching cases for non-gRPC API configs which happened to have grpc services defined. Risk Level: Low Testing: bazel test test/... all passed. Fixed #2680 Fixed #2902 Signed-off-by: James Buckland <jbuckland@google.com>
phlax
pushed a commit
that referenced
this issue
Jul 15, 2024
…2 updates (#35076) Bumps the pip group in /examples/grpc-bridge/client with 2 updates: [certifi](https://github.com/certifi/python-certifi) and [urllib3](https://github.com/urllib3/urllib3). Updates `certifi` from 2023.7.22 to 2024.7.4 <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/certifi/python-certifi/commit/bd8153872e9c6fc98f4023df9c2deaffea2fa463"><code>bd81538</code></a> 2024.07.04 (<a href="https://redirect.github.com/certifi/python-certifi/issues/295">#295</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/06a2cbf21f345563dde6c28b60e29d57e9b210b3"><code>06a2cbf</code></a> Bump peter-evans/create-pull-request from 6.0.5 to 6.1.0 (<a href="https://redirect.github.com/certifi/python-certifi/issues/294">#294</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/13bba02b72bac97c432c277158bc04b4d2a6bc23"><code>13bba02</code></a> Bump actions/checkout from 4.1.6 to 4.1.7 (<a href="https://redirect.github.com/certifi/python-certifi/issues/293">#293</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/e8abcd0e62b334c164b95d49fcabdc9ecbca0554"><code>e8abcd0</code></a> Bump pypa/gh-action-pypi-publish from 1.8.14 to 1.9.0 (<a href="https://redirect.github.com/certifi/python-certifi/issues/292">#292</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/124f4adf171e15cd9a91a8b6e0325ecc97be8fe1"><code>124f4ad</code></a> 2024.06.02 (<a href="https://redirect.github.com/certifi/python-certifi/issues/291">#291</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/c2196ce5d6ee675b27755a19948480a7823e2c6a"><code>c2196ce</code></a> --- (<a href="https://redirect.github.com/certifi/python-certifi/issues/290">#290</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/fefdeec7588ff1c05214b85a552afcad5fdb51b2"><code>fefdeec</code></a> Bump actions/checkout from 4.1.4 to 4.1.5 (<a href="https://redirect.github.com/certifi/python-certifi/issues/289">#289</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/3c5fb1560b826a7f83f1f9750173ff766492c9cf"><code>3c5fb15</code></a> Bump actions/download-artifact from 4.1.6 to 4.1.7 (<a href="https://redirect.github.com/certifi/python-certifi/issues/286">#286</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/4a9569a3eb58db8548536fc16c5c5c7af946a5b1"><code>4a9569a</code></a> Bump actions/checkout from 4.1.2 to 4.1.4 (<a href="https://redirect.github.com/certifi/python-certifi/issues/287">#287</a>)</li> <li><a href="https://github.com/certifi/python-certifi/commit/1fc808626a895a916b1e4c2b63abae6c5eafdbe3"><code>1fc8086</code></a> Bump peter-evans/create-pull-request from 6.0.4 to 6.0.5 (<a href="https://redirect.github.com/certifi/python-certifi/issues/288">#288</a>)</li> <li>Additional commits viewable in <a href="https://github.com/certifi/python-certifi/compare/2023.07.22...2024.07.04">compare view</a></li> </ul> </details> <br /> Updates `urllib3` from 2.0.7 to 2.2.2 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/urllib3/urllib3/releases">urllib3's releases</a>.</em></p> <blockquote> <h2>2.2.2</h2> <h2>🚀 urllib3 is fundraising for HTTP/2 support</h2> <p><a href="https://sethmlarson.dev/urllib3-is-fundraising-for-http2-support">urllib3 is raising ~$40,000 USD</a> to release HTTP/2 support and ensure long-term sustainable maintenance of the project after a sharp decline in financial support for 2023. If your company or organization uses Python and would benefit from HTTP/2 support in Requests, pip, cloud SDKs, and thousands of other projects <a href="https://opencollective.com/urllib3">please consider contributing financially</a> to ensure HTTP/2 support is developed sustainably and maintained for the long-haul.</p> <p>Thank you for your support.</p> <h2>Changes</h2> <ul> <li>Added the <code>Proxy-Authorization</code> header to the list of headers to strip from requests when redirecting to a different host. As before, different headers can be set via <code>Retry.remove_headers_on_redirect</code>.</li> <li>Allowed passing negative integers as <code>amt</code> to read methods of <code>http.client.HTTPResponse</code> as an alternative to <code>None</code>. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3122">#3122</a>)</li> <li>Fixed return types representing copying actions to use <code>typing.Self</code>. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3363">#3363</a>)</li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/urllib3/urllib3/compare/2.2.1...2.2.2">https://github.com/urllib3/urllib3/compare/2.2.1...2.2.2</a></p> <h2>2.2.1</h2> <h2>🚀 urllib3 is fundraising for HTTP/2 support</h2> <p><a href="https://sethmlarson.dev/urllib3-is-fundraising-for-http2-support">urllib3 is raising ~$40,000 USD</a> to release HTTP/2 support and ensure long-term sustainable maintenance of the project after a sharp decline in financial support for 2023. If your company or organization uses Python and would benefit from HTTP/2 support in Requests, pip, cloud SDKs, and thousands of other projects <a href="https://opencollective.com/urllib3">please consider contributing financially</a> to ensure HTTP/2 support is developed sustainably and maintained for the long-haul.</p> <p>Thank you for your support.</p> <h2>Changes</h2> <ul> <li>Fixed issue where <code>InsecureRequestWarning</code> was emitted for HTTPS connections when using Emscripten. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3331">#3331</a>)</li> <li>Fixed <code>HTTPConnectionPool.urlopen</code> to stop automatically casting non-proxy headers to <code>HTTPHeaderDict</code>. This change was premature as it did not apply to proxy headers and <code>HTTPHeaderDict</code> does not handle byte header values correctly yet. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3343">#3343</a>)</li> <li>Changed <code>ProtocolError</code> to <code>InvalidChunkLength</code> when response terminates before the chunk length is sent. (<a href="https://redirect.github.com/urllib3/urllib3/issues/2860">#2860</a>)</li> <li>Changed <code>ProtocolError</code> to be more verbose on incomplete reads with excess content. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3261">#3261</a>)</li> </ul> <h2>2.2.0</h2> <h2>🖥️ urllib3 now works in the browser</h2> <p>:tada: <strong>This release adds experimental support for <a href="https://urllib3.readthedocs.io/en/stable/reference/contrib/emscripten.html">using urllib3 in the browser with Pyodide</a>!</strong> 🎉</p> <p>Thanks to Joe Marshall (<a href="https://github.com/joemarshall"><code>@joemarshall</code></a>) for contributing this feature. This change was possible thanks to work done in urllib3 v2.0 to detach our API from <code>http.client</code>. Please report all bugs to the <a href="https://github.com/urllib3/urllib3/issues">urllib3 issue tracker</a>.</p> <h2>🚀 urllib3 is fundraising for HTTP/2 support</h2> <p><a href="https://sethmlarson.dev/urllib3-is-fundraising-for-http2-support">urllib3 is raising ~$40,000 USD</a> to release HTTP/2 support and ensure long-term sustainable maintenance of the project after a sharp decline in financial support for 2023. If your company or organization uses Python and would benefit from HTTP/2 support in Requests, pip, cloud SDKs, and thousands of other projects <a href="https://opencollective.com/urllib3">please consider contributing financially</a> to ensure HTTP/2 support is developed sustainably and maintained for the long-haul.</p> <p>Thank you for your support.</p> <h2>Changes</h2> <ul> <li>Added support for <a href="https://urllib3.readthedocs.io/en/latest/reference/contrib/emscripten.html">Emscripten and Pyodide</a>, including streaming support in cross-origin isolated browser environments where threading is enabled. (<a href="https://redirect.github.com/urllib3/urllib3/issues/2951">#2951</a>)</li> <li>Added support for <code>HTTPResponse.read1()</code> method. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3186">#3186</a>)</li> <li>Added rudimentary support for HTTP/2. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3284">#3284</a>)</li> <li>Fixed issue where requests against urls with trailing dots were failing due to SSL errors when using proxy. (<a href="https://redirect.github.com/urllib3/urllib3/issues/2244">#2244</a>)</li> <li>Fixed <code>HTTPConnection.proxy_is_verified</code> and <code>HTTPSConnection.proxy_is_verified</code> to be always set to a boolean after connecting to a proxy. It could be <code>None</code> in some cases previously. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3130">#3130</a>)</li> </ul> <!-- raw HTML omitted --> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/urllib3/urllib3/blob/main/CHANGES.rst">urllib3's changelog</a>.</em></p> <blockquote> <h1>2.2.2 (2024-06-17)</h1> <ul> <li>Added the <code>Proxy-Authorization</code> header to the list of headers to strip from requests when redirecting to a different host. As before, different headers can be set via <code>Retry.remove_headers_on_redirect</code>.</li> <li>Allowed passing negative integers as <code>amt</code> to read methods of <code>http.client.HTTPResponse</code> as an alternative to <code>None</code>. (<code>[#3122](urllib3/urllib3#3122) <https://github.com/urllib3/urllib3/issues/3122></code>__)</li> <li>Fixed return types representing copying actions to use <code>typing.Self</code>. (<code>[#3363](urllib3/urllib3#3363) <https://github.com/urllib3/urllib3/issues/3363></code>__)</li> </ul> <h1>2.2.1 (2024-02-16)</h1> <ul> <li>Fixed issue where <code>InsecureRequestWarning</code> was emitted for HTTPS connections when using Emscripten. (<code>[#3331](urllib3/urllib3#3331) <https://github.com/urllib3/urllib3/issues/3331></code>__)</li> <li>Fixed <code>HTTPConnectionPool.urlopen</code> to stop automatically casting non-proxy headers to <code>HTTPHeaderDict</code>. This change was premature as it did not apply to proxy headers and <code>HTTPHeaderDict</code> does not handle byte header values correctly yet. (<code>[#3343](urllib3/urllib3#3343) <https://github.com/urllib3/urllib3/issues/3343></code>__)</li> <li>Changed <code>InvalidChunkLength</code> to <code>ProtocolError</code> when response terminates before the chunk length is sent. (<code>[#2860](urllib3/urllib3#2860) <https://github.com/urllib3/urllib3/issues/2860></code>__)</li> <li>Changed <code>ProtocolError</code> to be more verbose on incomplete reads with excess content. (<code>[#3261](urllib3/urllib3#3261) <https://github.com/urllib3/urllib3/issues/3261></code>__)</li> </ul> <h1>2.2.0 (2024-01-30)</h1> <ul> <li>Added support for <code>Emscripten and Pyodide <https://urllib3.readthedocs.io/en/latest/reference/contrib/emscripten.html></code><strong>, including streaming support in cross-origin isolated browser environments where threading is enabled. (<code>[#2951](urllib3/urllib3#2951) <https://github.com/urllib3/urllib3/issues/2951></code></strong>)</li> <li>Added support for <code>HTTPResponse.read1()</code> method. (<code>[#3186](urllib3/urllib3#3186) <https://github.com/urllib3/urllib3/issues/3186></code>__)</li> <li>Added rudimentary support for HTTP/2. (<code>[#3284](urllib3/urllib3#3284) <https://github.com/urllib3/urllib3/issues/3284></code>__)</li> <li>Fixed issue where requests against urls with trailing dots were failing due to SSL errors when using proxy. (<code>[#2244](urllib3/urllib3#2244) <https://github.com/urllib3/urllib3/issues/2244></code>__)</li> <li>Fixed <code>HTTPConnection.proxy_is_verified</code> and <code>HTTPSConnection.proxy_is_verified</code> to be always set to a boolean after connecting to a proxy. It could be <code>None</code> in some cases previously. (<code>[#3130](urllib3/urllib3#3130) <https://github.com/urllib3/urllib3/issues/3130></code>__)</li> <li>Fixed an issue where <code>headers</code> passed in a request with <code>json=</code> would be mutated (<code>[#3203](urllib3/urllib3#3203) <https://github.com/urllib3/urllib3/issues/3203></code>__)</li> <li>Fixed <code>HTTPSConnection.is_verified</code> to be set to <code>False</code> when connecting from a HTTPS proxy to an HTTP target. It was set to <code>True</code> previously. (<code>[#3267](urllib3/urllib3#3267) <https://github.com/urllib3/urllib3/issues/3267></code>__)</li> <li>Fixed handling of new error message from OpenSSL 3.2.0 when configuring an HTTP proxy as HTTPS (<code>[#3268](urllib3/urllib3#3268) <https://github.com/urllib3/urllib3/issues/3268></code>__)</li> <li>Fixed TLS 1.3 post-handshake auth when the server certificate validation is disabled (<code>[#3325](urllib3/urllib3#3325) <https://github.com/urllib3/urllib3/issues/3325></code>__)</li> <li>Note for downstream distributors: To run integration tests, you now need to run the tests a second time with the <code>--integration</code> pytest flag. (<code>[#3181](urllib3/urllib3#3181) <https://github.com/urllib3/urllib3/issues/3181></code>__)</li> </ul> <h1>2.1.0 (2023-11-13)</h1> <ul> <li>Removed support for the deprecated urllib3[secure] extra. (<code>[#2680](urllib3/urllib3#2680) <https://github.com/urllib3/urllib3/issues/2680></code>__)</li> <li>Removed support for the deprecated SecureTransport TLS implementation. (<code>[#2681](urllib3/urllib3#2681) <https://github.com/urllib3/urllib3/issues/2681></code>__)</li> <li>Removed support for the end-of-life Python 3.7. (<code>[#3143](urllib3/urllib3#3143) <https://github.com/urllib3/urllib3/issues/3143></code>__)</li> <li>Allowed loading CA certificates from memory for proxies. (<code>[#3065](urllib3/urllib3#3065) <https://github.com/urllib3/urllib3/issues/3065></code>__)</li> <li>Fixed decoding Gzip-encoded responses which specified <code>x-gzip</code> content-encoding. (<code>[#3174](urllib3/urllib3#3174) <https://github.com/urllib3/urllib3/issues/3174></code>__)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/urllib3/urllib3/commit/27e2a5c5a7ab6a517252cc8dcef3ffa6ffb8f61a"><code>27e2a5c</code></a> Release 2.2.2 (<a href="https://redirect.github.com/urllib3/urllib3/issues/3406">#3406</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/accff72ecc2f6cf5a76d9570198a93ac7c90270e"><code>accff72</code></a> Merge pull request from GHSA-34jh-p97f-mpxf</li> <li><a href="https://github.com/urllib3/urllib3/commit/34be4a57e59eb7365bcc37d52e9f8271b5b8d0d3"><code>34be4a5</code></a> Pin CFFI to a new release candidate instead of a Git commit (<a href="https://redirect.github.com/urllib3/urllib3/issues/3398">#3398</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/da410581b6b3df73da976b5ce5eb20a4bd030437"><code>da41058</code></a> Bump browser-actions/setup-chrome from 1.6.0 to 1.7.1 (<a href="https://redirect.github.com/urllib3/urllib3/issues/3399">#3399</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/b07a669bd970d69847801148286b726f0570b625"><code>b07a669</code></a> Bump github/codeql-action from 2.13.4 to 3.25.6 (<a href="https://redirect.github.com/urllib3/urllib3/issues/3396">#3396</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/b8589ec9f8c4da91511e601b632ac06af7e7c10e"><code>b8589ec</code></a> Measure coverage with v4 of artifact actions (<a href="https://redirect.github.com/urllib3/urllib3/issues/3394">#3394</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/f3bdc5585111429e22c81b5fb26c3ec164d98b81"><code>f3bdc55</code></a> Allow triggering CI manually (<a href="https://redirect.github.com/urllib3/urllib3/issues/3391">#3391</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/52392654b30183129cf3ec06010306f517d9c146"><code>5239265</code></a> Fix HTTP version in debug log (<a href="https://redirect.github.com/urllib3/urllib3/issues/3316">#3316</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/b34619f94ece0c40e691a5aaf1304953d88089de"><code>b34619f</code></a> Bump actions/checkout to 4.1.4 (<a href="https://redirect.github.com/urllib3/urllib3/issues/3387">#3387</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/9961d14de7c920091d42d42ed76d5d479b80064d"><code>9961d14</code></a> Bump browser-actions/setup-chrome from 1.5.0 to 1.6.0 (<a href="https://redirect.github.com/urllib3/urllib3/issues/3386">#3386</a>)</li> <li>Additional commits viewable in <a href="https://github.com/urllib3/urllib3/compare/2.0.7...2.2.2">compare view</a></li> </ul> </details> <br /> Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions You can disable automated security fix PRs for this repo from the [Security Alerts page](https://github.com/envoyproxy/envoy/network/alerts). </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
phlax
pushed a commit
that referenced
this issue
Jul 15, 2024
…e/client in the pip group (#34784) Bumps the pip group in /examples/grpc-bridge/client with 1 update: [urllib3](https://github.com/urllib3/urllib3). Updates `urllib3` from 2.0.7 to 2.2.2 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/urllib3/urllib3/releases">urllib3's releases</a>.</em></p> <blockquote> <h2>2.2.2</h2> <h2>🚀 urllib3 is fundraising for HTTP/2 support</h2> <p><a href="https://sethmlarson.dev/urllib3-is-fundraising-for-http2-support">urllib3 is raising ~$40,000 USD</a> to release HTTP/2 support and ensure long-term sustainable maintenance of the project after a sharp decline in financial support for 2023. If your company or organization uses Python and would benefit from HTTP/2 support in Requests, pip, cloud SDKs, and thousands of other projects <a href="https://opencollective.com/urllib3">please consider contributing financially</a> to ensure HTTP/2 support is developed sustainably and maintained for the long-haul.</p> <p>Thank you for your support.</p> <h2>Changes</h2> <ul> <li>Added the <code>Proxy-Authorization</code> header to the list of headers to strip from requests when redirecting to a different host. As before, different headers can be set via <code>Retry.remove_headers_on_redirect</code>.</li> <li>Allowed passing negative integers as <code>amt</code> to read methods of <code>http.client.HTTPResponse</code> as an alternative to <code>None</code>. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3122">#3122</a>)</li> <li>Fixed return types representing copying actions to use <code>typing.Self</code>. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3363">#3363</a>)</li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/urllib3/urllib3/compare/2.2.1...2.2.2">https://github.com/urllib3/urllib3/compare/2.2.1...2.2.2</a></p> <h2>2.2.1</h2> <h2>🚀 urllib3 is fundraising for HTTP/2 support</h2> <p><a href="https://sethmlarson.dev/urllib3-is-fundraising-for-http2-support">urllib3 is raising ~$40,000 USD</a> to release HTTP/2 support and ensure long-term sustainable maintenance of the project after a sharp decline in financial support for 2023. If your company or organization uses Python and would benefit from HTTP/2 support in Requests, pip, cloud SDKs, and thousands of other projects <a href="https://opencollective.com/urllib3">please consider contributing financially</a> to ensure HTTP/2 support is developed sustainably and maintained for the long-haul.</p> <p>Thank you for your support.</p> <h2>Changes</h2> <ul> <li>Fixed issue where <code>InsecureRequestWarning</code> was emitted for HTTPS connections when using Emscripten. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3331">#3331</a>)</li> <li>Fixed <code>HTTPConnectionPool.urlopen</code> to stop automatically casting non-proxy headers to <code>HTTPHeaderDict</code>. This change was premature as it did not apply to proxy headers and <code>HTTPHeaderDict</code> does not handle byte header values correctly yet. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3343">#3343</a>)</li> <li>Changed <code>ProtocolError</code> to <code>InvalidChunkLength</code> when response terminates before the chunk length is sent. (<a href="https://redirect.github.com/urllib3/urllib3/issues/2860">#2860</a>)</li> <li>Changed <code>ProtocolError</code> to be more verbose on incomplete reads with excess content. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3261">#3261</a>)</li> </ul> <h2>2.2.0</h2> <h2>🖥️ urllib3 now works in the browser</h2> <p>:tada: <strong>This release adds experimental support for <a href="https://urllib3.readthedocs.io/en/stable/reference/contrib/emscripten.html">using urllib3 in the browser with Pyodide</a>!</strong> 🎉</p> <p>Thanks to Joe Marshall (<a href="https://github.com/joemarshall"><code>@joemarshall</code></a>) for contributing this feature. This change was possible thanks to work done in urllib3 v2.0 to detach our API from <code>http.client</code>. Please report all bugs to the <a href="https://github.com/urllib3/urllib3/issues">urllib3 issue tracker</a>.</p> <h2>🚀 urllib3 is fundraising for HTTP/2 support</h2> <p><a href="https://sethmlarson.dev/urllib3-is-fundraising-for-http2-support">urllib3 is raising ~$40,000 USD</a> to release HTTP/2 support and ensure long-term sustainable maintenance of the project after a sharp decline in financial support for 2023. If your company or organization uses Python and would benefit from HTTP/2 support in Requests, pip, cloud SDKs, and thousands of other projects <a href="https://opencollective.com/urllib3">please consider contributing financially</a> to ensure HTTP/2 support is developed sustainably and maintained for the long-haul.</p> <p>Thank you for your support.</p> <h2>Changes</h2> <ul> <li>Added support for <a href="https://urllib3.readthedocs.io/en/latest/reference/contrib/emscripten.html">Emscripten and Pyodide</a>, including streaming support in cross-origin isolated browser environments where threading is enabled. (<a href="https://redirect.github.com/urllib3/urllib3/issues/2951">#2951</a>)</li> <li>Added support for <code>HTTPResponse.read1()</code> method. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3186">#3186</a>)</li> <li>Added rudimentary support for HTTP/2. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3284">#3284</a>)</li> <li>Fixed issue where requests against urls with trailing dots were failing due to SSL errors when using proxy. (<a href="https://redirect.github.com/urllib3/urllib3/issues/2244">#2244</a>)</li> <li>Fixed <code>HTTPConnection.proxy_is_verified</code> and <code>HTTPSConnection.proxy_is_verified</code> to be always set to a boolean after connecting to a proxy. It could be <code>None</code> in some cases previously. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3130">#3130</a>)</li> </ul> <!-- raw HTML omitted --> </blockquote> <p>... (truncated)</p> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/urllib3/urllib3/blob/main/CHANGES.rst">urllib3's changelog</a>.</em></p> <blockquote> <h1>2.2.2 (2024-06-17)</h1> <ul> <li>Added the <code>Proxy-Authorization</code> header to the list of headers to strip from requests when redirecting to a different host. As before, different headers can be set via <code>Retry.remove_headers_on_redirect</code>.</li> <li>Allowed passing negative integers as <code>amt</code> to read methods of <code>http.client.HTTPResponse</code> as an alternative to <code>None</code>. (<code>[#3122](urllib3/urllib3#3122) <https://github.com/urllib3/urllib3/issues/3122></code>__)</li> <li>Fixed return types representing copying actions to use <code>typing.Self</code>. (<code>[#3363](urllib3/urllib3#3363) <https://github.com/urllib3/urllib3/issues/3363></code>__)</li> </ul> <h1>2.2.1 (2024-02-16)</h1> <ul> <li>Fixed issue where <code>InsecureRequestWarning</code> was emitted for HTTPS connections when using Emscripten. (<code>[#3331](urllib3/urllib3#3331) <https://github.com/urllib3/urllib3/issues/3331></code>__)</li> <li>Fixed <code>HTTPConnectionPool.urlopen</code> to stop automatically casting non-proxy headers to <code>HTTPHeaderDict</code>. This change was premature as it did not apply to proxy headers and <code>HTTPHeaderDict</code> does not handle byte header values correctly yet. (<code>[#3343](urllib3/urllib3#3343) <https://github.com/urllib3/urllib3/issues/3343></code>__)</li> <li>Changed <code>InvalidChunkLength</code> to <code>ProtocolError</code> when response terminates before the chunk length is sent. (<code>[#2860](urllib3/urllib3#2860) <https://github.com/urllib3/urllib3/issues/2860></code>__)</li> <li>Changed <code>ProtocolError</code> to be more verbose on incomplete reads with excess content. (<code>[#3261](urllib3/urllib3#3261) <https://github.com/urllib3/urllib3/issues/3261></code>__)</li> </ul> <h1>2.2.0 (2024-01-30)</h1> <ul> <li>Added support for <code>Emscripten and Pyodide <https://urllib3.readthedocs.io/en/latest/reference/contrib/emscripten.html></code><strong>, including streaming support in cross-origin isolated browser environments where threading is enabled. (<code>[#2951](urllib3/urllib3#2951) <https://github.com/urllib3/urllib3/issues/2951></code></strong>)</li> <li>Added support for <code>HTTPResponse.read1()</code> method. (<code>[#3186](urllib3/urllib3#3186) <https://github.com/urllib3/urllib3/issues/3186></code>__)</li> <li>Added rudimentary support for HTTP/2. (<code>[#3284](urllib3/urllib3#3284) <https://github.com/urllib3/urllib3/issues/3284></code>__)</li> <li>Fixed issue where requests against urls with trailing dots were failing due to SSL errors when using proxy. (<code>[#2244](urllib3/urllib3#2244) <https://github.com/urllib3/urllib3/issues/2244></code>__)</li> <li>Fixed <code>HTTPConnection.proxy_is_verified</code> and <code>HTTPSConnection.proxy_is_verified</code> to be always set to a boolean after connecting to a proxy. It could be <code>None</code> in some cases previously. (<code>[#3130](urllib3/urllib3#3130) <https://github.com/urllib3/urllib3/issues/3130></code>__)</li> <li>Fixed an issue where <code>headers</code> passed in a request with <code>json=</code> would be mutated (<code>[#3203](urllib3/urllib3#3203) <https://github.com/urllib3/urllib3/issues/3203></code>__)</li> <li>Fixed <code>HTTPSConnection.is_verified</code> to be set to <code>False</code> when connecting from a HTTPS proxy to an HTTP target. It was set to <code>True</code> previously. (<code>[#3267](urllib3/urllib3#3267) <https://github.com/urllib3/urllib3/issues/3267></code>__)</li> <li>Fixed handling of new error message from OpenSSL 3.2.0 when configuring an HTTP proxy as HTTPS (<code>[#3268](urllib3/urllib3#3268) <https://github.com/urllib3/urllib3/issues/3268></code>__)</li> <li>Fixed TLS 1.3 post-handshake auth when the server certificate validation is disabled (<code>[#3325](urllib3/urllib3#3325) <https://github.com/urllib3/urllib3/issues/3325></code>__)</li> <li>Note for downstream distributors: To run integration tests, you now need to run the tests a second time with the <code>--integration</code> pytest flag. (<code>[#3181](urllib3/urllib3#3181) <https://github.com/urllib3/urllib3/issues/3181></code>__)</li> </ul> <h1>2.1.0 (2023-11-13)</h1> <ul> <li>Removed support for the deprecated urllib3[secure] extra. (<code>[#2680](urllib3/urllib3#2680) <https://github.com/urllib3/urllib3/issues/2680></code>__)</li> <li>Removed support for the deprecated SecureTransport TLS implementation. (<code>[#2681](urllib3/urllib3#2681) <https://github.com/urllib3/urllib3/issues/2681></code>__)</li> <li>Removed support for the end-of-life Python 3.7. (<code>[#3143](urllib3/urllib3#3143) <https://github.com/urllib3/urllib3/issues/3143></code>__)</li> <li>Allowed loading CA certificates from memory for proxies. (<code>[#3065](urllib3/urllib3#3065) <https://github.com/urllib3/urllib3/issues/3065></code>__)</li> <li>Fixed decoding Gzip-encoded responses which specified <code>x-gzip</code> content-encoding. (<code>[#3174](urllib3/urllib3#3174) <https://github.com/urllib3/urllib3/issues/3174></code>__)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/urllib3/urllib3/commit/27e2a5c5a7ab6a517252cc8dcef3ffa6ffb8f61a"><code>27e2a5c</code></a> Release 2.2.2 (<a href="https://redirect.github.com/urllib3/urllib3/issues/3406">#3406</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/accff72ecc2f6cf5a76d9570198a93ac7c90270e"><code>accff72</code></a> Merge pull request from GHSA-34jh-p97f-mpxf</li> <li><a href="https://github.com/urllib3/urllib3/commit/34be4a57e59eb7365bcc37d52e9f8271b5b8d0d3"><code>34be4a5</code></a> Pin CFFI to a new release candidate instead of a Git commit (<a href="https://redirect.github.com/urllib3/urllib3/issues/3398">#3398</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/da410581b6b3df73da976b5ce5eb20a4bd030437"><code>da41058</code></a> Bump browser-actions/setup-chrome from 1.6.0 to 1.7.1 (<a href="https://redirect.github.com/urllib3/urllib3/issues/3399">#3399</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/b07a669bd970d69847801148286b726f0570b625"><code>b07a669</code></a> Bump github/codeql-action from 2.13.4 to 3.25.6 (<a href="https://redirect.github.com/urllib3/urllib3/issues/3396">#3396</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/b8589ec9f8c4da91511e601b632ac06af7e7c10e"><code>b8589ec</code></a> Measure coverage with v4 of artifact actions (<a href="https://redirect.github.com/urllib3/urllib3/issues/3394">#3394</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/f3bdc5585111429e22c81b5fb26c3ec164d98b81"><code>f3bdc55</code></a> Allow triggering CI manually (<a href="https://redirect.github.com/urllib3/urllib3/issues/3391">#3391</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/52392654b30183129cf3ec06010306f517d9c146"><code>5239265</code></a> Fix HTTP version in debug log (<a href="https://redirect.github.com/urllib3/urllib3/issues/3316">#3316</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/b34619f94ece0c40e691a5aaf1304953d88089de"><code>b34619f</code></a> Bump actions/checkout to 4.1.4 (<a href="https://redirect.github.com/urllib3/urllib3/issues/3387">#3387</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/9961d14de7c920091d42d42ed76d5d479b80064d"><code>9961d14</code></a> Bump browser-actions/setup-chrome from 1.5.0 to 1.6.0 (<a href="https://redirect.github.com/urllib3/urllib3/issues/3386">#3386</a>)</li> <li>Additional commits viewable in <a href="https://github.com/urllib3/urllib3/compare/2.0.7...2.2.2">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions You can disable automated security fix PRs for this repo from the [Security Alerts page](https://github.com/envoyproxy/envoy/network/alerts). </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
phlax
pushed a commit
that referenced
this issue
Jul 15, 2024
…ip group (#34786) Bumps the pip group in /tools/base with 1 update: [urllib3](https://github.com/urllib3/urllib3). Updates `urllib3` from 2.2.0 to 2.2.2 <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/urllib3/urllib3/releases">urllib3's releases</a>.</em></p> <blockquote> <h2>2.2.2</h2> <h2>🚀 urllib3 is fundraising for HTTP/2 support</h2> <p><a href="https://sethmlarson.dev/urllib3-is-fundraising-for-http2-support">urllib3 is raising ~$40,000 USD</a> to release HTTP/2 support and ensure long-term sustainable maintenance of the project after a sharp decline in financial support for 2023. If your company or organization uses Python and would benefit from HTTP/2 support in Requests, pip, cloud SDKs, and thousands of other projects <a href="https://opencollective.com/urllib3">please consider contributing financially</a> to ensure HTTP/2 support is developed sustainably and maintained for the long-haul.</p> <p>Thank you for your support.</p> <h2>Changes</h2> <ul> <li>Added the <code>Proxy-Authorization</code> header to the list of headers to strip from requests when redirecting to a different host. As before, different headers can be set via <code>Retry.remove_headers_on_redirect</code>.</li> <li>Allowed passing negative integers as <code>amt</code> to read methods of <code>http.client.HTTPResponse</code> as an alternative to <code>None</code>. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3122">#3122</a>)</li> <li>Fixed return types representing copying actions to use <code>typing.Self</code>. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3363">#3363</a>)</li> </ul> <p><strong>Full Changelog</strong>: <a href="https://github.com/urllib3/urllib3/compare/2.2.1...2.2.2">https://github.com/urllib3/urllib3/compare/2.2.1...2.2.2</a></p> <h2>2.2.1</h2> <h2>🚀 urllib3 is fundraising for HTTP/2 support</h2> <p><a href="https://sethmlarson.dev/urllib3-is-fundraising-for-http2-support">urllib3 is raising ~$40,000 USD</a> to release HTTP/2 support and ensure long-term sustainable maintenance of the project after a sharp decline in financial support for 2023. If your company or organization uses Python and would benefit from HTTP/2 support in Requests, pip, cloud SDKs, and thousands of other projects <a href="https://opencollective.com/urllib3">please consider contributing financially</a> to ensure HTTP/2 support is developed sustainably and maintained for the long-haul.</p> <p>Thank you for your support.</p> <h2>Changes</h2> <ul> <li>Fixed issue where <code>InsecureRequestWarning</code> was emitted for HTTPS connections when using Emscripten. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3331">#3331</a>)</li> <li>Fixed <code>HTTPConnectionPool.urlopen</code> to stop automatically casting non-proxy headers to <code>HTTPHeaderDict</code>. This change was premature as it did not apply to proxy headers and <code>HTTPHeaderDict</code> does not handle byte header values correctly yet. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3343">#3343</a>)</li> <li>Changed <code>ProtocolError</code> to <code>InvalidChunkLength</code> when response terminates before the chunk length is sent. (<a href="https://redirect.github.com/urllib3/urllib3/issues/2860">#2860</a>)</li> <li>Changed <code>ProtocolError</code> to be more verbose on incomplete reads with excess content. (<a href="https://redirect.github.com/urllib3/urllib3/issues/3261">#3261</a>)</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/urllib3/urllib3/blob/main/CHANGES.rst">urllib3's changelog</a>.</em></p> <blockquote> <h1>2.2.2 (2024-06-17)</h1> <ul> <li>Added the <code>Proxy-Authorization</code> header to the list of headers to strip from requests when redirecting to a different host. As before, different headers can be set via <code>Retry.remove_headers_on_redirect</code>.</li> <li>Allowed passing negative integers as <code>amt</code> to read methods of <code>http.client.HTTPResponse</code> as an alternative to <code>None</code>. (<code>[#3122](urllib3/urllib3#3122) <https://github.com/urllib3/urllib3/issues/3122></code>__)</li> <li>Fixed return types representing copying actions to use <code>typing.Self</code>. (<code>[#3363](urllib3/urllib3#3363) <https://github.com/urllib3/urllib3/issues/3363></code>__)</li> </ul> <h1>2.2.1 (2024-02-16)</h1> <ul> <li>Fixed issue where <code>InsecureRequestWarning</code> was emitted for HTTPS connections when using Emscripten. (<code>[#3331](urllib3/urllib3#3331) <https://github.com/urllib3/urllib3/issues/3331></code>__)</li> <li>Fixed <code>HTTPConnectionPool.urlopen</code> to stop automatically casting non-proxy headers to <code>HTTPHeaderDict</code>. This change was premature as it did not apply to proxy headers and <code>HTTPHeaderDict</code> does not handle byte header values correctly yet. (<code>[#3343](urllib3/urllib3#3343) <https://github.com/urllib3/urllib3/issues/3343></code>__)</li> <li>Changed <code>InvalidChunkLength</code> to <code>ProtocolError</code> when response terminates before the chunk length is sent. (<code>[#2860](urllib3/urllib3#2860) <https://github.com/urllib3/urllib3/issues/2860></code>__)</li> <li>Changed <code>ProtocolError</code> to be more verbose on incomplete reads with excess content. (<code>[#3261](urllib3/urllib3#3261) <https://github.com/urllib3/urllib3/issues/3261></code>__)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/urllib3/urllib3/commit/27e2a5c5a7ab6a517252cc8dcef3ffa6ffb8f61a"><code>27e2a5c</code></a> Release 2.2.2 (<a href="https://redirect.github.com/urllib3/urllib3/issues/3406">#3406</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/accff72ecc2f6cf5a76d9570198a93ac7c90270e"><code>accff72</code></a> Merge pull request from GHSA-34jh-p97f-mpxf</li> <li><a href="https://github.com/urllib3/urllib3/commit/34be4a57e59eb7365bcc37d52e9f8271b5b8d0d3"><code>34be4a5</code></a> Pin CFFI to a new release candidate instead of a Git commit (<a href="https://redirect.github.com/urllib3/urllib3/issues/3398">#3398</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/da410581b6b3df73da976b5ce5eb20a4bd030437"><code>da41058</code></a> Bump browser-actions/setup-chrome from 1.6.0 to 1.7.1 (<a href="https://redirect.github.com/urllib3/urllib3/issues/3399">#3399</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/b07a669bd970d69847801148286b726f0570b625"><code>b07a669</code></a> Bump github/codeql-action from 2.13.4 to 3.25.6 (<a href="https://redirect.github.com/urllib3/urllib3/issues/3396">#3396</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/b8589ec9f8c4da91511e601b632ac06af7e7c10e"><code>b8589ec</code></a> Measure coverage with v4 of artifact actions (<a href="https://redirect.github.com/urllib3/urllib3/issues/3394">#3394</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/f3bdc5585111429e22c81b5fb26c3ec164d98b81"><code>f3bdc55</code></a> Allow triggering CI manually (<a href="https://redirect.github.com/urllib3/urllib3/issues/3391">#3391</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/52392654b30183129cf3ec06010306f517d9c146"><code>5239265</code></a> Fix HTTP version in debug log (<a href="https://redirect.github.com/urllib3/urllib3/issues/3316">#3316</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/b34619f94ece0c40e691a5aaf1304953d88089de"><code>b34619f</code></a> Bump actions/checkout to 4.1.4 (<a href="https://redirect.github.com/urllib3/urllib3/issues/3387">#3387</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/9961d14de7c920091d42d42ed76d5d479b80064d"><code>9961d14</code></a> Bump browser-actions/setup-chrome from 1.5.0 to 1.6.0 (<a href="https://redirect.github.com/urllib3/urllib3/issues/3386">#3386</a>)</li> <li>Additional commits viewable in <a href="https://github.com/urllib3/urllib3/compare/2.2.0...2.2.2">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore <dependency name> major version` will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself) - `@dependabot ignore <dependency name> minor version` will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself) - `@dependabot ignore <dependency name>` will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself) - `@dependabot unignore <dependency name>` will remove all of the ignore conditions of the specified dependency - `@dependabot unignore <dependency name> <ignore condition>` will remove the ignore condition of the specified dependency and ignore conditions You can disable automated security fix PRs for this repo from the [Security Alerts page](https://github.com/envoyproxy/envoy/network/alerts). </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Title: Support api_config_source without cluster_names
Description:
To support deprecation of cluster_names in api_config_source (https://github.com/envoyproxy/envoy/blob/master/source/common/config/utility.cc#L184)
we should relax/remove assertions that cluster_names.size() is 1 (https://github.com/envoyproxy/envoy/blob/master/source/common/config/utility.cc#L185)
and also handle call sites that extract the cluster name field value (https://github.com/envoyproxy/envoy/blob/master/source/server/lds_subscription.cc#L20)
For example, the following LDS config which does not have field cluster_names should be considered valid:
The text was updated successfully, but these errors were encountered: