Update README.md

README.md

@@ -30,7 +30,9 @@ I've included the PDF assembly guide of a QUIK so decide which wiring option you
 
 I found these orientations work best, a little support is needed on the pusher and motor mount.
 
-(add printbed picture)
+![print orientation](https://github.com/LCobeaga/Nerf-MA40-Full-Auto/assets/44830532/23f4beb9-3fac-449c-b30f-fe5a605f4b4f)
+
+I also printed the post in the center of the disk solid for extra support on the D-slot.
 
 ## Blaster Modificatons 
 
@@ -53,27 +55,37 @@ Remove the support wall shown, it can be bent off, no need to flush cut.
 
 ## Assembly
 
-![trigger switch placement](https://user-images.githubusercontent.com/44830532/235378748-8f6e842e-d461-4e6f-9831-48afc5a60cd8.png)
+![trigger switch](https://github.com/LCobeaga/Nerf-MA40-Full-Auto/assets/44830532/0ee53eff-3c9c-45bc-99e5-882c289d9ac0)
 
 The trigger switch sits on the switch plate and is friction fit around the post and X support under it. 
 
-(insert pusher assembly image)
+![motor and screw](https://github.com/LCobeaga/Nerf-MA40-Full-Auto/assets/44830532/d547126a-8430-4c04-aedd-506efefc408a)
+
+Slot the N20 motor into the top of the motor mount and attach the switch plate in the back with a toy screw, this will also lock the motor in place.
+
+![disk assembly](https://github.com/LCobeaga/Nerf-MA40-Full-Auto/assets/44830532/60516068-9480-4fc0-a9a5-d36454fcf5ae)
+
+screw the M2 bolt into the top flat side of the disk, and push the D slot hole onto the motor. This is a friction fit.
+
+![block placement](https://github.com/LCobeaga/Nerf-MA40-Full-Auto/assets/44830532/2c5969c2-3429-486d-8e23-2c69839a6ffa)
+
+The pusher mechanism is friction fit between the post and wall of the mag release.
+Make sure that the corner of the motor mount (red arrow) is not sitting on top of the mag release but is pushed down past it. 
 
-Slot the N20 motor into the top of the motor mount and attach the switch plate in the back with a tiy screw, this will also lock the motor in place.
+![pusher step 1](https://github.com/LCobeaga/Nerf-MA40-Full-Auto/assets/44830532/7f82f0bc-729c-4961-a115-c2dfa12d1f87)
 
-(insert disk assmebly image)
+To insert the actual pusher first move the screw to the front of the pusher mechanism and align the pusher slot.
 
-screw the M2 bolt into the top flay side of the disk, and push the D slot hole onto the motor. This is a friction fit.
+(image)
 
-(insert back image)
+Then place the bolt into the pusher slot.
 
-The pusher mechanism is friction fit between the post and wall of the mag release, and supported below by a block reaching to the shell. 
-The pusher itself is snapped into the slot of the old pusher and then the M2 screw is placed into the slot. (you may need to flex the pusher over the bolt)
+(image)
 
-(insert pusher image)
+finally snap the long tab of the pusher into the old pusher channel. 
 
 Add lubriucant to the top of the pusher disk, the right side of the pusher arm, and inside both slots on the top of the pusher.
 
-And thats all, have fun using your slightly more game accurate MA40 (in game the RPM is 720 so decide on your N20 motor accordingly)
+And thats all, have fun using your slightly more game accurate MA40 (in game the RPM is 720 so decide on your N20 motor accordingly).
 
 <a rel="license" href="http://creativecommons.org/licenses/by-nc-sa/3.0/"><img alt="Creative Commons License" style="border-width:0" src="https://i.creativecommons.org/l/by-nc-sa/3.0/88x31.png" /></a><br />This work is licensed under a <a rel="license" href="http://creativecommons.org/licenses/by-nc-sa/3.0/">Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License</a>.