Update 5.4.x+fslc up to v5.4.125 #366
Merged
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
commit 1119a72 upstream. The tree checker checks the extent ref hash at read and write time to make sure we do not corrupt the file system. Generally extent references go inline, but if we have enough of them we need to make an item, which looks like key.objectid = <bytenr> key.type = <BTRFS_EXTENT_DATA_REF_KEY|BTRFS_TREE_BLOCK_REF_KEY> key.offset = hash(tree, owner, offset) However if key.offset collide with an unrelated extent reference we'll simply key.offset++ until we get something that doesn't collide. Obviously this doesn't match at tree checker time, and thus we error while writing out the transaction. This is relatively easy to reproduce, simply do something like the following xfs_io -f -c "pwrite 0 1M" file offset=2 for i in {0..10000} do xfs_io -c "reflink file 0 ${offset}M 1M" file offset=$(( offset + 2 )) done xfs_io -c "reflink file 0 17999258914816 1M" file xfs_io -c "reflink file 0 35998517829632 1M" file xfs_io -c "reflink file 0 53752752058368 1M" file btrfs filesystem sync And the sync will error out because we'll abort the transaction. The magic values above are used because they generate hash collisions with the first file in the main subvol. The fix for this is to remove the hash value check from tree checker, as we have no idea which offset ours should belong to. Reported-by: Tuomas Lähdekorpi <tuomas.lahdekorpi@gmail.com> Fixes: 0785a9a ("btrfs: tree-checker: Add EXTENT_DATA_REF check") CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add comment] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de658a1 ] RTL8156 sends notifications about every 32ms. Only display/log notifications when something changes. This issue has been reported by others: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1832472 https://lkml.org/lkml/2020/8/27/1083 ... [785962.779840] usb 1-1: new high-speed USB device number 5 using xhci_hcd [785962.929944] usb 1-1: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00 [785962.929949] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [785962.929952] usb 1-1: Product: USB 10/100/1G/2.5G LAN [785962.929954] usb 1-1: Manufacturer: Realtek [785962.929956] usb 1-1: SerialNumber: 000000001 [785962.991755] usbcore: registered new interface driver cdc_ether [785963.017068] cdc_ncm 1-1:2.0: MAC-Address: 00:24:27:88:08:15 [785963.017072] cdc_ncm 1-1:2.0: setting rx_max = 16384 [785963.017169] cdc_ncm 1-1:2.0: setting tx_max = 16384 [785963.017682] cdc_ncm 1-1:2.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-1, CDC NCM, 00:24:27:88:08:15 [785963.019211] usbcore: registered new interface driver cdc_ncm [785963.023856] usbcore: registered new interface driver cdc_wdm [785963.025461] usbcore: registered new interface driver cdc_mbim [785963.038824] cdc_ncm 1-1:2.0 enx002427880815: renamed from usb0 [785963.089586] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected [785963.121673] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected [785963.153682] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected ... This is about 2KB per second and will overwrite all contents of a 1MB dmesg buffer in under 10 minutes rendering them useless for debugging many kernel problems. This is also an extra 180 MB/day in /var/logs (or 1GB per week) rendering the majority of those logs useless too. When the link is up (expected state), spew amount is >2x higher: ... [786139.600992] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.632997] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink [786139.665097] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.697100] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink [786139.729094] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.761108] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink ... Chrome OS cannot support RTL8156 until this is fixed. Signed-off-by: Grant Grundler <grundler@chromium.org> Reviewed-by: Hayes Wang <hayeswang@realtek.com> Link: https://lore.kernel.org/r/20210120011208.3768105-1-grundler@chromium.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff40e0d ] GCC reports the following warning with W=1 sound/usb/mixer_quirks.c: In function ‘snd_microii_controls_create’: sound/usb/mixer_quirks.c:1694:2: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] 1694 | const static usb_mixer_elem_resume_func_t resume_funcs[] = { | ^~~~~ Move static to the beginning of declaration Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200111214736.3002-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2d94630 upstream syzbot discovered a bug in which an OOB access was being made because an unsuitable key_idx value was wrongly considered to be acceptable while deleting a key in nl80211_del_key(). Since we don't know the cipher at the time of deletion, if cfg80211_validate_key_settings() were to be called directly in nl80211_del_key(), even valid keys would be wrongly determined invalid, and deletion wouldn't occur correctly. For this reason, a new function - cfg80211_valid_key_idx(), has been created, to determine if the key_idx value provided is valid or not. cfg80211_valid_key_idx() is directly called in 2 places - nl80211_del_key(), and cfg80211_validate_key_settings(). Reported-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com Tested-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Link: https://lore.kernel.org/r/20201204215825.129879-1-anant.thazhemadam@gmail.com Cc: stable@vger.kernel.org [also disallow IGTK key IDs if no IGTK cipher is supported] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Zubin Mithra <zsm@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35d470b ] When support for up to 10 temp sensors and for disabling automatic BIOS fan control was added, noone updated the index values used for disallowing fan support and fan type calls. Fix those values. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20210513154546.12430-1-W_Armin@gmx.de Fixes: 1bb46a2 ("hwmon: (dell-smm) Support up to 10 temp sensors") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22cbdbc ] When ipv6 sockopt register fails, the ipv4 one needs to be removed. Fixes: a0ae256 ("netfilter: conntrack: remove l3proto abstraction") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45add3c ] UEFI spec 2.9, p.108, table 4-1 lists the scenario that both attributes are cleared with the description "No memory access protection is possible for Entry". So we can have valid entries where both attributes are cleared, so remove the check. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Fixes: 10f0d2f ("efi: Implement generic support for the Memory Attributes table") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 942859d ] snprintf() should be given the full buffer size, not one less. And it guarantees nul-termination, so doing it manually afterwards is pointless. It's even potentially harmful (though probably not in practice because CPER_REC_LEN is 256), due to the "return how much would have been written had the buffer been big enough" semantics. I.e., if the bank and/or device strings are long enough that the "DIMM location ..." output gets truncated, writing to msg[n] is a buffer overflow. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Fixes: 3760cd2 ("CPER: Adjust code flow of some functions") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1ce2c7 ] The error code returned from vfio_ext_cap_len() is stored in 'len', not in 'ret'. Fixes: 89e1f7d ("vfio: Add PCI device driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Message-Id: <20210515020458.6771-1-thunder.leizhen@huawei.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a55ca3 ] zap_vma_ptes() is only available when CONFIG_MMU is set/enabled. Without CONFIG_MMU, vfio_pci.o has build errors, so make VFIO_PCI depend on MMU. riscv64-linux-ld: drivers/vfio/pci/vfio_pci.o: in function `vfio_pci_mmap_open': vfio_pci.c:(.text+0x1ec): undefined reference to `zap_vma_ptes' riscv64-linux-ld: drivers/vfio/pci/vfio_pci.o: in function `.L0 ': vfio_pci.c:(.text+0x165c): undefined reference to `zap_vma_ptes' Fixes: 11c4cd0 ("vfio-pci: Fault mmaps to enable vma tracking") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Cornelia Huck <cohuck@redhat.com> Cc: kvm@vger.kernel.org Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Eric Auger <eric.auger@redhat.com> Message-Id: <20210515190856.2130-1-rdunlap@infradead.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 752774c ] Fix to return a negative error code from the framebuffer_alloc() error handling case instead of 0, also release regions in some error handing cases. Fixes: cacade1 ("sample: vfio mdev display - guest driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Message-Id: <20210520133641.1421378-1-weiyongjun1@huawei.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc51ff9 ] The ->parent_module is the one that use in try_module_get. It should also be the one the we use in module_put during vfio_platform_open(). Fixes: 32a2d71 ("vfio: platform: introduce vfio-platform-base module") Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Message-Id: <20210518192133.59195-1-mgurtovoy@nvidia.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56e4ee8 ] syzbot reported memory leak [1] when adding service with HASHED flag. We should ignore this flag both from sockopt and netlink provided data, otherwise the service is not hashed and not visible while releasing resources. [1] BUG: memory leak unreferenced object 0xffff888115227800 (size 512): comm "syz-executor263", pid 8658, jiffies 4294951882 (age 12.560s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff83977188>] kmalloc include/linux/slab.h:556 [inline] [<ffffffff83977188>] kzalloc include/linux/slab.h:686 [inline] [<ffffffff83977188>] ip_vs_add_service+0x598/0x7c0 net/netfilter/ipvs/ip_vs_ctl.c:1343 [<ffffffff8397d770>] do_ip_vs_set_ctl+0x810/0xa40 net/netfilter/ipvs/ip_vs_ctl.c:2570 [<ffffffff838449a8>] nf_setsockopt+0x68/0xa0 net/netfilter/nf_sockopt.c:101 [<ffffffff839ae4e9>] ip_setsockopt+0x259/0x1ff0 net/ipv4/ip_sockglue.c:1435 [<ffffffff839fa03c>] raw_setsockopt+0x18c/0x1b0 net/ipv4/raw.c:857 [<ffffffff83691f20>] __sys_setsockopt+0x1b0/0x360 net/socket.c:2117 [<ffffffff836920f2>] __do_sys_setsockopt net/socket.c:2128 [inline] [<ffffffff836920f2>] __se_sys_setsockopt net/socket.c:2125 [inline] [<ffffffff836920f2>] __x64_sys_setsockopt+0x22/0x30 net/socket.c:2125 [<ffffffff84350efa>] do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47 [<ffffffff84400068>] entry_SYSCALL_64_after_hwframe+0x44/0xae Reported-and-tested-by: syzbot+e562383183e4b1766930@syzkaller.appspotmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Julian Anastasov <ja@ssi.bg> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3dd653c ] Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 224ee88 ("Input: add force feedback driver for PID devices") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc5f9f5 ] clang doesn't like printing a 32-bit integer using %hX format string: drivers/hid/i2c-hid/i2c-hid-core.c:994:18: error: format specifies type 'unsigned short' but the argument has type '__u32' (aka 'unsigned int') [-Werror,-Wformat] client->name, hid->vendor, hid->product); ^~~~~~~~~~~ drivers/hid/i2c-hid/i2c-hid-core.c:994:31: error: format specifies type 'unsigned short' but the argument has type '__u32' (aka 'unsigned int') [-Werror,-Wformat] client->name, hid->vendor, hid->product); ^~~~~~~~~~~~ Use an explicit cast to truncate it to the low 16 bits instead. Fixes: 9ee3e06 ("HID: i2c-hid: override HID descriptors for certain devices") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb91702 ] Fix current behavior of skipping template allocation in case the ct action is in zone 0. Skipping the allocation may cause the datapath ct code to ignore the entire ct action with all its attributes (commit, nat) in case the ct action in zone 0 was preceded by a ct clear action. The ct clear action sets the ct_state to untracked and resets the skb->_nfct pointer. Under these conditions and without an allocated ct template, the skb->_nfct pointer will remain NULL which will cause the tc ct action handler to exit without handling commit and nat actions, if such exist. For example, the following rule in OVS dp: recirc_id(0x2),ct_state(+new-est-rel-rpl+trk),ct_label(0/0x1), \ in_port(eth0),actions:ct_clear,ct(commit,nat(src=10.11.0.12)), \ recirc(0x37a) Will result in act_ct skipping the commit and nat actions in zone 0. The change removes the skipping of template allocation for zone 0 and treats it the same as any other zone. Fixes: b57dc7c ("net/sched: Introduce action ct") Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Link: https://lore.kernel.org/r/20210526170110.54864-1-lariel@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4dfe10 ] ACPICA commit bc43c878fd4ff27ba75b1d111b97ee90d4a82707 Fixes: c27f3d0 ("Fix race in GenericSerialBus (I2C) and GPIO OpRegion parameter handling") Link: acpica/acpica@bc43c878 Reported-by: John Garry <john.garry@huawei.com> Reported-by: Xiang Chen <chenxiang66@hisilicon.com> Tested-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1710eb9 ] nft_ct_expect_obj_eval() calls nf_ct_ext_add() for a confirmed conntrack entry. However, nf_ct_ext_add() can only be called for !nf_ct_is_confirmed(). [ 1825.349056] WARNING: CPU: 0 PID: 1279 at net/netfilter/nf_conntrack_extend.c:48 nf_ct_xt_add+0x18e/0x1a0 [nf_conntrack] [ 1825.351391] RIP: 0010:nf_ct_ext_add+0x18e/0x1a0 [nf_conntrack] [ 1825.351493] Code: 41 5c 41 5d 41 5e 41 5f c3 41 bc 0a 00 00 00 e9 15 ff ff ff ba 09 00 00 00 31 f6 4c 89 ff e8 69 6c 3d e9 eb 96 45 31 ed eb cd <0f> 0b e9 b1 fe ff ff e8 86 79 14 e9 eb bf 0f 1f 40 00 0f 1f 44 00 [ 1825.351721] RSP: 0018:ffffc90002e1f1e8 EFLAGS: 00010202 [ 1825.351790] RAX: 000000000000000e RBX: ffff88814f5783c0 RCX: ffffffffc0e4f887 [ 1825.351881] RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88814f578440 [ 1825.351971] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff88814f578447 [ 1825.352060] R10: ffffed1029eaf088 R11: 0000000000000001 R12: ffff88814f578440 [ 1825.352150] R13: ffff8882053f3a00 R14: 0000000000000000 R15: 0000000000000a20 [ 1825.352240] FS: 00007f992261c900(0000) GS:ffff889faec00000(0000) knlGS:0000000000000000 [ 1825.352343] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1825.352417] CR2: 000056070a4d1158 CR3: 000000015efe0000 CR4: 0000000000350ee0 [ 1825.352508] Call Trace: [ 1825.352544] nf_ct_helper_ext_add+0x10/0x60 [nf_conntrack] [ 1825.352641] nft_ct_expect_obj_eval+0x1b8/0x1e0 [nft_ct] [ 1825.352716] nft_do_chain+0x232/0x850 [nf_tables] Add the ct helper extension only for unconfirmed conntrack. Skip rule evaluation if the ct helper extension does not exist. Thus, you can only create expectations from the first packet. It should be possible to remove this limitation by adding a new action to attach a generic ct helper to the first packet. Then, use this ct helper extension from follow up packets to create the ct expectation. While at it, add a missing check to skip the template conntrack too and remove check for IPCT_UNTRACK which is implicit to !ct. Fixes: 857b460 ("netfilter: nft_ct: add ct expectations support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8971ee8 ] The private helper data size cannot be updated. However, updates that contain NFCTH_PRIV_DATA_LEN might bogusly hit EBUSY even if the size is the same. Fixes: 12f7a50 ("netfilter: add user-space connection tracking helper infrastructure") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79c6b8e ] Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: be51da0 ("ieee802154: Stop using NLA_PUT*().") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210508062517.2574-1-thunder.leizhen@huawei.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 373e864 ] Fix to return negative error code -ENOBUFS from the error handling case instead of 0, as done elsewhere in this function. Fixes: 3e9c156 ("ieee802154: add netlink interfaces for llsec") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20210519141614.3040055-1-weiyongjun1@huawei.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit faae814 ] Add missing exception tracing to XDP when a number of different errors can occur. The support was only partial. Several errors where not logged which would confuse the user quite a lot not knowing where and why the packets disappeared. Fixes: 21092e9 ("ixgbevf: Add support for XDP_TX action") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Vishakha Jambekar <vishakha.jambekar@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 821bbf7 ] Reported by syzbot: HEAD commit: 90c911a Merge tag 'fixes' of git://git.kernel.org/pub/scm.. git tree: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master dashboard link: https://syzkaller.appspot.com/bug?extid=123aa35098fd3c000eb7 compiler: Debian clang version 11.0.1-2 ================================================================== BUG: KASAN: slab-out-of-bounds in fib6_nh_get_excptn_bucket net/ipv6/route.c:1604 [inline] BUG: KASAN: slab-out-of-bounds in fib6_nh_flush_exceptions+0xbd/0x360 net/ipv6/route.c:1732 Read of size 8 at addr ffff8880145c78f8 by task syz-executor.4/17760 CPU: 0 PID: 17760 Comm: syz-executor.4 Not tainted 5.12.0-rc8-syzkaller #0 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x202/0x31e lib/dump_stack.c:120 print_address_description+0x5f/0x3b0 mm/kasan/report.c:232 __kasan_report mm/kasan/report.c:399 [inline] kasan_report+0x15c/0x200 mm/kasan/report.c:416 fib6_nh_get_excptn_bucket net/ipv6/route.c:1604 [inline] fib6_nh_flush_exceptions+0xbd/0x360 net/ipv6/route.c:1732 fib6_nh_release+0x9a/0x430 net/ipv6/route.c:3536 fib6_info_destroy_rcu+0xcb/0x1c0 net/ipv6/ip6_fib.c:174 rcu_do_batch kernel/rcu/tree.c:2559 [inline] rcu_core+0x8f6/0x1450 kernel/rcu/tree.c:2794 __do_softirq+0x372/0x7a6 kernel/softirq.c:345 invoke_softirq kernel/softirq.c:221 [inline] __irq_exit_rcu+0x22c/0x260 kernel/softirq.c:422 irq_exit_rcu+0x5/0x20 kernel/softirq.c:434 sysvec_apic_timer_interrupt+0x91/0xb0 arch/x86/kernel/apic/apic.c:1100 </IRQ> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:632 RIP: 0010:lock_acquire+0x1f6/0x720 kernel/locking/lockdep.c:5515 Code: f6 84 24 a1 00 00 00 02 0f 85 8d 02 00 00 f7 c3 00 02 00 00 49 bd 00 00 00 00 00 fc ff df 74 01 fb 48 c7 44 24 40 0e 36 e0 45 <4b> c7 44 3d 00 00 00 00 00 4b c7 44 3d 09 00 00 00 00 43 c7 44 3d RSP: 0018:ffffc90009e06560 EFLAGS: 00000206 RAX: 1ffff920013c0cc0 RBX: 0000000000000246 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc90009e066e0 R08: dffffc0000000000 R09: fffffbfff1f992b1 R10: fffffbfff1f992b1 R11: 0000000000000000 R12: 0000000000000000 R13: dffffc0000000000 R14: 0000000000000000 R15: 1ffff920013c0cb4 rcu_lock_acquire+0x2a/0x30 include/linux/rcupdate.h:267 rcu_read_lock include/linux/rcupdate.h:656 [inline] ext4_get_group_info+0xea/0x340 fs/ext4/ext4.h:3231 ext4_mb_prefetch+0x123/0x5d0 fs/ext4/mballoc.c:2212 ext4_mb_regular_allocator+0x8a5/0x28f0 fs/ext4/mballoc.c:2379 ext4_mb_new_blocks+0xc6e/0x24f0 fs/ext4/mballoc.c:4982 ext4_ext_map_blocks+0x2be3/0x7210 fs/ext4/extents.c:4238 ext4_map_blocks+0xab3/0x1cb0 fs/ext4/inode.c:638 ext4_getblk+0x187/0x6c0 fs/ext4/inode.c:848 ext4_bread+0x2a/0x1c0 fs/ext4/inode.c:900 ext4_append+0x1a4/0x360 fs/ext4/namei.c:67 ext4_init_new_dir+0x337/0xa10 fs/ext4/namei.c:2768 ext4_mkdir+0x4b8/0xc00 fs/ext4/namei.c:2814 vfs_mkdir+0x45b/0x640 fs/namei.c:3819 ovl_do_mkdir fs/overlayfs/overlayfs.h:161 [inline] ovl_mkdir_real+0x53/0x1a0 fs/overlayfs/dir.c:146 ovl_create_real+0x280/0x490 fs/overlayfs/dir.c:193 ovl_workdir_create+0x425/0x600 fs/overlayfs/super.c:788 ovl_make_workdir+0xed/0x1140 fs/overlayfs/super.c:1355 ovl_get_workdir fs/overlayfs/super.c:1492 [inline] ovl_fill_super+0x39ee/0x5370 fs/overlayfs/super.c:2035 mount_nodev+0x52/0xe0 fs/super.c:1413 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x86/0x270 fs/super.c:1497 do_new_mount fs/namespace.c:2903 [inline] path_mount+0x196f/0x2be0 fs/namespace.c:3233 do_mount fs/namespace.c:3246 [inline] __do_sys_mount fs/namespace.c:3454 [inline] __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3431 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f68f2b87188 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 000000000056bf60 RCX: 00000000004665f9 RDX: 00000000200000c0 RSI: 0000000020000000 RDI: 000000000040000a RBP: 00000000004bfbb9 R08: 0000000020000100 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056bf60 R13: 00007ffe19002dff R14: 00007f68f2b87300 R15: 0000000000022000 Allocated by task 17768: kasan_save_stack mm/kasan/common.c:38 [inline] kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:427 [inline] ____kasan_kmalloc+0xc2/0xf0 mm/kasan/common.c:506 kasan_kmalloc include/linux/kasan.h:233 [inline] __kmalloc+0xb4/0x380 mm/slub.c:4055 kmalloc include/linux/slab.h:559 [inline] kzalloc include/linux/slab.h:684 [inline] fib6_info_alloc+0x2c/0xd0 net/ipv6/ip6_fib.c:154 ip6_route_info_create+0x55d/0x1a10 net/ipv6/route.c:3638 ip6_route_add+0x22/0x120 net/ipv6/route.c:3728 inet6_rtm_newroute+0x2cd/0x2260 net/ipv6/route.c:5352 rtnetlink_rcv_msg+0xb34/0xe70 net/core/rtnetlink.c:5553 netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2502 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x7de/0x9b0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0xaa6/0xe90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x5a2/0x900 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmsg+0x319/0x400 net/socket.c:2433 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae Last potentially related work creation: kasan_save_stack+0x27/0x50 mm/kasan/common.c:38 kasan_record_aux_stack+0xee/0x120 mm/kasan/generic.c:345 __call_rcu kernel/rcu/tree.c:3039 [inline] call_rcu+0x1b1/0xa30 kernel/rcu/tree.c:3114 fib6_info_release include/net/ip6_fib.h:337 [inline] ip6_route_info_create+0x10c4/0x1a10 net/ipv6/route.c:3718 ip6_route_add+0x22/0x120 net/ipv6/route.c:3728 inet6_rtm_newroute+0x2cd/0x2260 net/ipv6/route.c:5352 rtnetlink_rcv_msg+0xb34/0xe70 net/core/rtnetlink.c:5553 netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2502 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x7de/0x9b0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0xaa6/0xe90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x5a2/0x900 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmsg+0x319/0x400 net/socket.c:2433 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae Second to last potentially related work creation: kasan_save_stack+0x27/0x50 mm/kasan/common.c:38 kasan_record_aux_stack+0xee/0x120 mm/kasan/generic.c:345 insert_work+0x54/0x400 kernel/workqueue.c:1331 __queue_work+0x981/0xcc0 kernel/workqueue.c:1497 queue_work_on+0x111/0x200 kernel/workqueue.c:1524 queue_work include/linux/workqueue.h:507 [inline] call_usermodehelper_exec+0x283/0x470 kernel/umh.c:433 kobject_uevent_env+0x1349/0x1730 lib/kobject_uevent.c:617 kvm_uevent_notify_change+0x309/0x3b0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:4809 kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:877 [inline] kvm_put_kvm+0x9c/0xd10 arch/x86/kvm/../../../virt/kvm/kvm_main.c:920 kvm_vcpu_release+0x53/0x60 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3120 __fput+0x352/0x7b0 fs/file_table.c:280 task_work_run+0x146/0x1c0 kernel/task_work.c:140 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:174 [inline] exit_to_user_mode_prepare+0x10b/0x1e0 kernel/entry/common.c:208 __syscall_exit_to_user_mode_work kernel/entry/common.c:290 [inline] syscall_exit_to_user_mode+0x26/0x70 kernel/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff8880145c7800 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 56 bytes to the right of 192-byte region [ffff8880145c7800, ffff8880145c78c0) The buggy address belongs to the page: page:ffffea00005171c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x145c7 flags: 0xfff00000000200(slab) raw: 00fff00000000200 ffffea00006474c0 0000000200000002 ffff888010c41a00 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880145c7780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8880145c7800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8880145c7880: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff8880145c7900: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880145c7980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ================================================================== In the ip6_route_info_create function, in the case that the nh pointer is not NULL, the fib6_nh in fib6_info has not been allocated. Therefore, when trying to free fib6_info in this error case using fib6_info_release, the function will call fib6_info_destroy_rcu, which it will access fib6_nh_release(f6i->fib6_nh); However, f6i->fib6_nh doesn't have any refcount yet given the lack of allocation causing the reported memory issue above. Therefore, releasing the empty pointer directly instead would be the solution. Fixes: f88d8ea ("ipv6: Plumb support for nexthop object in a fib6_info") Fixes: 706ec91 ("ipv6: Fix nexthop refcnt leak when creating ipv6 route info") Signed-off-by: Coco Li <lixiaoyan@google.com> Cc: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3955945 ] The VF_MBX_ARQLEN register array is per-PF, not global, so we should not use the absolute VF ID as an index. Instead, use the per-PF VF ID. This fixes an issue with VFs on PFs other than 0 not seeing reset. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8679f07 ] Some AVF drivers expect the VF_MBX_ATQLEN register to be cleared for any type of VFR/VFLR. Fix this by clearing the VF_MBX_ATQLEN register at the same time as VF_MBX_ARQLEN. Fixes: 82ba012 ("ice: clear VF ARQLEN register on reset") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9f8320 ] Currently in the ice driver, the check whether to allow a LLDP packet to egress the interface from the PF_VSI is being based on the SKB's priority field. It checks to see if the packets priority is equal to TC_PRIO_CONTROL. Injected LLDP packets do not always meet this condition. SCAPY defaults to a sk_buff->protocol value of ETH_P_ALL (0x0003) and does not set the priority field. There will be other injection methods (even ones used by end users) that will not correctly configure the socket so that SKB fields are correctly populated. Then ethernet header has to have to correct value for the protocol though. Add a check to also allow packets whose ethhdr->h_proto matches ETH_P_LLDP (0x88CC). Fixes: 0c3a610 ("ice: Allow egress control packets from PF_VSI") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f78c60 ] If the hardware is still accessing memory after SMMU translation is disabled (as part of smmu shutdown callback), then the IOVAs (I/O virtual address) which it was using will go on the bus as the physical addresses which will result in unknown crashes like NoC/interconnect errors. So, implement shutdown callback for i2c driver to suspend the bus during system "reboot" or "shutdown". Fixes: 37692de ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller") Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 346497c ] Optimize i40e_run_xdp_zc() for the XDP program verdict being XDP_REDIRECT in the xsk zero-copy path. This path is only used when having AF_XDP zero-copy on and in that case most packets will be directed to user space. This provides a little over 100k extra packets in throughput on my server when running l2fwd in xdpsock. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6c10b4 ] Add missing exception tracing to XDP when a number of different errors can occur. The support was only partial. Several errors where not logged which would confuse the user quite a lot not knowing where and why the packets disappeared. Fixes: 74608d1 ("i40e: add support for XDP_TX action") Fixes: 0a71418 ("i40e: add AF_XDP zero-copy Rx support") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dabea67 ] While enabling EDAC support for the LS1028A it was discovered that the memory node has a wrong endianness setting as well as a wrong interrupt assignment. Fix both. This was tested on a sl28 board. To force ECC errors, you can use the error injection supported by the controller in hardware (with CONFIG_EDAC_DEBUG enabled): # enable error injection $ echo 0x100 > /sys/devices/system/edac/mc/mc0/inject_ctrl # flip lowest bit of the data $ echo 0x1 > /sys/devices/system/edac/mc/mc0/inject_data_lo Fixes: 8897f32 ("arm64: dts: Add support for NXP LS1028A SoC") Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0711f0d upstream. During boot, kernel_init_freeable() initializes `cad_pid` to the init task's struct pid. Later on, we may change `cad_pid` via a sysctl, and when this happens proc_do_cad_pid() will increment the refcount on the new pid via get_pid(), and will decrement the refcount on the old pid via put_pid(). As we never called get_pid() when we initialized `cad_pid`, we decrement a reference we never incremented, can therefore free the init task's struct pid early. As there can be dangling references to the struct pid, we can later encounter a use-after-free (e.g. when delivering signals). This was spotted when fuzzing v5.13-rc3 with Syzkaller, but seems to have been around since the conversion of `cad_pid` to struct pid in commit 9ec5209 ("[PATCH] replace cad_pid by a struct pid") from the pre-KASAN stone age of v2.6.19. Fix this by getting a reference to the init task's struct pid when we assign it to `cad_pid`. Full KASAN splat below. ================================================================== BUG: KASAN: use-after-free in ns_of_pid include/linux/pid.h:153 [inline] BUG: KASAN: use-after-free in task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509 Read of size 4 at addr ffff23794dda0004 by task syz-executor.0/273 CPU: 1 PID: 273 Comm: syz-executor.0 Not tainted 5.12.0-00001-g9aef892b2d15 Freescale#1 Hardware name: linux,dummy-virt (DT) Call trace: ns_of_pid include/linux/pid.h:153 [inline] task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509 do_notify_parent+0x308/0xe60 kernel/signal.c:1950 exit_notify kernel/exit.c:682 [inline] do_exit+0x2334/0x2bd0 kernel/exit.c:845 do_group_exit+0x108/0x2c8 kernel/exit.c:922 get_signal+0x4e4/0x2a88 kernel/signal.c:2781 do_signal arch/arm64/kernel/signal.c:882 [inline] do_notify_resume+0x300/0x970 arch/arm64/kernel/signal.c:936 work_pending+0xc/0x2dc Allocated by task 0: slab_post_alloc_hook+0x50/0x5c0 mm/slab.h:516 slab_alloc_node mm/slub.c:2907 [inline] slab_alloc mm/slub.c:2915 [inline] kmem_cache_alloc+0x1f4/0x4c0 mm/slub.c:2920 alloc_pid+0xdc/0xc00 kernel/pid.c:180 copy_process+0x2794/0x5e18 kernel/fork.c:2129 kernel_clone+0x194/0x13c8 kernel/fork.c:2500 kernel_thread+0xd4/0x110 kernel/fork.c:2552 rest_init+0x44/0x4a0 init/main.c:687 arch_call_rest_init+0x1c/0x28 start_kernel+0x520/0x554 init/main.c:1064 0x0 Freed by task 270: slab_free_hook mm/slub.c:1562 [inline] slab_free_freelist_hook+0x98/0x260 mm/slub.c:1600 slab_free mm/slub.c:3161 [inline] kmem_cache_free+0x224/0x8e0 mm/slub.c:3177 put_pid.part.4+0xe0/0x1a8 kernel/pid.c:114 put_pid+0x30/0x48 kernel/pid.c:109 proc_do_cad_pid+0x190/0x1b0 kernel/sysctl.c:1401 proc_sys_call_handler+0x338/0x4b0 fs/proc/proc_sysctl.c:591 proc_sys_write+0x34/0x48 fs/proc/proc_sysctl.c:617 call_write_iter include/linux/fs.h:1977 [inline] new_sync_write+0x3ac/0x510 fs/read_write.c:518 vfs_write fs/read_write.c:605 [inline] vfs_write+0x9c4/0x1018 fs/read_write.c:585 ksys_write+0x124/0x240 fs/read_write.c:658 __do_sys_write fs/read_write.c:670 [inline] __se_sys_write fs/read_write.c:667 [inline] __arm64_sys_write+0x78/0xb0 fs/read_write.c:667 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall arch/arm64/kernel/syscall.c:49 [inline] el0_svc_common.constprop.1+0x16c/0x388 arch/arm64/kernel/syscall.c:129 do_el0_svc+0xf8/0x150 arch/arm64/kernel/syscall.c:168 el0_svc+0x28/0x38 arch/arm64/kernel/entry-common.c:416 el0_sync_handler+0x134/0x180 arch/arm64/kernel/entry-common.c:432 el0_sync+0x154/0x180 arch/arm64/kernel/entry.S:701 The buggy address belongs to the object at ffff23794dda0000 which belongs to the cache pid of size 224 The buggy address is located 4 bytes inside of 224-byte region [ffff23794dda0000, ffff23794dda00e0) The buggy address belongs to the page: page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4dda0 head:(____ptrval____) order:1 compound_mapcount:0 flags: 0x3fffc0000010200(slab|head) raw: 03fffc0000010200 dead000000000100 dead000000000122 ffff23794d40d080 raw: 0000000000000000 0000000000190019 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff23794dd9ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff23794dd9ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff23794dda0000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff23794dda0080: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff23794dda0100: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00 ================================================================== Link: https://lkml.kernel.org/r/20210524172230.38715-1-mark.rutland@arm.com Fixes: 9ec5209 ("[PATCH] replace cad_pid by a struct pid") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Christian Brauner <christian@brauner.io> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6bba447 upstream. When fallocate punches holes out of inode size, if original isize is in the middle of last cluster, then the part from isize to the end of the cluster will be zeroed with buffer write, at that time isize is not yet updated to match the new size, if writeback is kicked in, it will invoke ocfs2_writepage()->block_write_full_page() where the pages out of inode size will be dropped. That will cause file corruption. Fix this by zero out eof blocks when extending the inode size. Running the following command with qemu-image 4.2.1 can get a corrupted coverted image file easily. qemu-img convert -p -t none -T none -f qcow2 $qcow_image \ -O qcow2 -o compat=1.1 $qcow_image.conv The usage of fallocate in qemu is like this, it first punches holes out of inode size, then extend the inode size. fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2276196352, 65536) = 0 fallocate(11, 0, 2276196352, 65536) = 0 v1: https://www.spinics.net/lists/linux-fsdevel/msg193999.html v2: https://lore.kernel.org/linux-fsdevel/20210525093034.GB4112@quack2.suse.cz/T/ Link: https://lkml.kernel.org/r/20210528210648.9124-1-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Jan Kara <jack@suse.cz> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…nect commit 4ac06a1 upstream. It's possible to trigger NULL pointer dereference by local unprivileged user, when calling getsockname() after failed bind() (e.g. the bind fails because LLCP_SAP_MAX used as SAP): BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 1 PID: 426 Comm: llcp_sock_getna Not tainted 5.13.0-rc2-next-20210521+ Freescale#9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1 04/01/2014 Call Trace: llcp_sock_getname+0xb1/0xe0 __sys_getpeername+0x95/0xc0 ? lockdep_hardirqs_on_prepare+0xd5/0x180 ? syscall_enter_from_user_mode+0x1c/0x40 __x64_sys_getpeername+0x11/0x20 do_syscall_64+0x36/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xae This can be reproduced with Syzkaller C repro (bind followed by getpeername): https://syzkaller.appspot.com/x/repro.c?x=14def446e00000 Cc: <stable@vger.kernel.org> Fixes: d646960 ("NFC: Initial LLCP support") Reported-by: syzbot+80fb126e7f7d8b1a5914@syzkaller.appspotmail.com Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210531072138.5219-1-krzysztof.kozlowski@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dce3d8e upstream. On QUERY2 IOCTL don't query counts of correctable and uncorrectable errors, since when RAS is enabled and supported on Vega20 server boards, this takes insurmountably long time, in O(n^3), which slows the system down to the point of it being unusable when we have GUI up. Fixes: ae363a2 ("drm/amdgpu: Add a new flag to AMDGPU_CTX_OP_QUERY_STATE2") Cc: Alexander Deucher <Alexander.Deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0743860 upstream. Releasing pinned BOs is illegal now. UVD 6 was missing from: commit 2f40801 ("drm/amdgpu: make sure we unpin the UVD BO") Fixes: 2f40801 ("drm/amdgpu: make sure we unpin the UVD BO") Cc: stable@vger.kernel.org Signed-off-by: Nirmoy Das <nirmoy.das@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d65f9e upstream. PIC interrupts do not support affinity setting and they can end up on any online CPU. Therefore, it's required to mark the associated vectors as system-wide reserved. Otherwise, the corresponding irq descriptors are copied to the secondary CPUs but the vectors are not marked as assigned or reserved. This works correctly for the IO/APIC case. When the IO/APIC is disabled via config, kernel command line or lack of enumeration then all legacy interrupts are routed through the PIC, but nothing marks them as system-wide reserved vectors. As a consequence, a subsequent allocation on a secondary CPU can result in allocating one of these vectors, which triggers the BUG() in apic_update_vector() because the interrupt descriptor slot is not empty. Imran tried to work around that by marking those interrupts as allocated when a CPU comes online. But that's wrong in case that the IO/APIC is available and one of the legacy interrupts, e.g. IRQ0, has been switched to PIC mode because then marking them as allocated will fail as they are already marked as system vectors. Stay consistent and update the legacy vectors after attempting IO/APIC initialization and mark them as system vectors in case that no IO/APIC is available. Fixes: 69cde00 ("x86/vector: Use matrix allocator for vector assignment") Reported-by: Imran Khan <imran.f.khan@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20210519233928.2157496-1-imran.f.khan@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d61bec0 upstream. While doing error injection testing I saw that sometimes we'd get an abort that wouldn't stop the current transaction commit from completing. This abort was coming from finish ordered IO, but at this point in the transaction commit we should have gotten an error and stopped. It turns out the abort came from finish ordered io while trying to write out the free space cache. It occurred to me that any failure inside of finish_ordered_io isn't actually raised to the person doing the writing, so we could have any number of failures in this path and think the ordered extent completed successfully and the inode was fine. Fix this by marking the ordered extent with BTRFS_ORDERED_IOERR, and marking the mapping of the inode with mapping_set_error, so any callers that simply call fdatawait will also get the error. With this we're seeing the IO error on the free space inode when we fail to do the finish_ordered_io. CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b86652b upstream. Error injection stress would sometimes fail with checksums on disk that did not have a corresponding extent. This occurred because the pattern in btrfs_del_csums was while (1) { ret = btrfs_search_slot(); if (ret < 0) break; } ret = 0; out: btrfs_free_path(path); return ret; If we got an error from btrfs_search_slot we'd clear the error because we were breaking instead of goto out. Instead of using goto out, simply handle the cases where we may leave a random value in ret, and get rid of the ret = 0; out: pattern and simply allow break to have the proper error reporting. With this fix we properly abort the transaction and do not commit thinking we successfully deleted the csum. Reviewed-by: Qu Wenruo <wqu@suse.com> CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 856bd27 upstream. We are unconditionally returning 0 in cleanup_ref_head, despite the fact that btrfs_del_csums could fail. We need to return the error so the transaction gets aborted properly, fix this by returning ret from btrfs_del_csums in cleanup_ref_head. Reviewed-by: Qu Wenruo <wqu@suse.com> CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 011b28a upstream. This function has the following pattern while (1) { ret = whatever(); if (ret) goto out; } ret = 0 out: return ret; However several places in this while loop we simply break; when there's a problem, thus clearing the return value, and in one case we do a return -EIO, and leak the memory for the path. Fix this by re-arranging the loop to deal with ret == 1 coming from btrfs_search_slot, and then simply delete the ret = 0; out: bit so everybody can break if there is an error, which will allow for proper error handling to occur. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d84cf06 ] The userfaultfd hugetlb tests cause a resv_huge_pages underflow. This happens when hugetlb_mcopy_atomic_pte() is called with !is_continue on an index for which we already have a page in the cache. When this happens, we allocate a second page, double consuming the reservation, and then fail to insert the page into the cache and return -EEXIST. To fix this, we first check if there is a page in the cache which already consumed the reservation, and return -EEXIST immediately if so. There is still a rare condition where we fail to copy the page contents AND race with a call for hugetlb_no_page() for this index and again we will underflow resv_huge_pages. That is fixed in a more complicated patch not targeted for -stable. Test: Hacked the code locally such that resv_huge_pages underflows produce a warning, then: ./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10 2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success ./tools/testing/selftests/vm/userfaultfd hugetlb 10 2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success Both tests succeed and produce no warnings. After the test runs number of free/resv hugepages is correct. [mike.kravetz@oracle.com: changelog fixes] Link: https://lkml.kernel.org/r/20210528004649.85298-1-almasrymina@google.com Fixes: 8fb5deb ("userfaultfd: hugetlbfs: add hugetlb_mcopy_atomic_pte for userfaultfd support") Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1d86859 upstream. The dev_port is meant to distinguish the network ports belonging to the same PCI function. Our devices only have one network port associated with each PCI function and so we should not set it for correctness. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ffbb45 upstream This function returns the order of a transparent huge page. It compiles to 0 if CONFIG_TRANSPARENT_HUGEPAGE is disabled. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: http://lkml.kernel.org/r/20200629151959.15779-4-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 57417ce upstream Patch series "Fix read-only THP for non-tmpfs filesystems". As described more verbosely in the [3/3] changelog, we can inadvertently put an order-0 page in the page cache which occupies 512 consecutive entries. Users are running into this if they enable the READ_ONLY_THP_FOR_FS config option; see https://bugzilla.kernel.org/show_bug.cgi?id=206569 and Qian Cai has also reported it here: https://lore.kernel.org/lkml/20200616013309.GB815@lca.pw/ This is a rather intrusive way of fixing the problem, but has the advantage that I've actually been testing it with the THP patches, which means that it sees far more use than it does upstream -- indeed, Song has been entirely unable to reproduce it. It also has the advantage that it removes a few patches from my gargantuan backlog of THP patches. This patch (of 3): This function returns the order of the entry at the index. We need this because there isn't space in the shadow entry to encode its order. [akpm@linux-foundation.org: export xa_get_order to modules] Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Qian Cai <cai@lca.pw> Cc: Song Liu <songliubraving@fb.com> Link: https://lkml.kernel.org/r/20200903183029.14930-1-willy@infradead.org Link: https://lkml.kernel.org/r/20200903183029.14930-2-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8fc7564 upstream In order to use multi-index entries for huge pages in the page cache, we need to be able to split a multi-index entry (eg if a file is truncated in the middle of a huge page entry). This version does not support splitting more than one level of the tree at a time. This is an acceptable limitation for the page cache as we do not expect to support order-12 pages in the near future. [akpm@linux-foundation.org: export xas_split_alloc() to modules] [willy@infradead.org: fix xarray split] Link: https://lkml.kernel.org/r/20200910175450.GV6583@casper.infradead.org [willy@infradead.org: fix xarray] Link: https://lkml.kernel.org/r/20201001233943.GW20115@casper.infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Qian Cai <cai@lca.pw> Cc: Song Liu <songliubraving@fb.com> Link: https://lkml.kernel.org/r/20200903183029.14930-3-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 198b62f upstream When a THP is removed from the page cache by reclaim, we replace it with a shadow entry that occupies all slots of the XArray previously occupied by the THP. If the user then accesses that page again, we only allocate a single page, but storing it into the shadow entry replaces all entries with that one page. That leads to bugs like page dumped because: VM_BUG_ON_PAGE(page_to_pgoff(page) != offset) ------------[ cut here ]------------ kernel BUG at mm/filemap.c:2529! https://bugzilla.kernel.org/show_bug.cgi?id=206569 This is hard to reproduce with mainline, but happens regularly with the THP patchset (as so many more THPs are created). This solution is take from the THP patchset. It splits the shadow entry into order-0 pieces at the time that we bring a new page into cache. Fixes: 99cb0db ("mm,thp: add read-only THP support for (non-shmem) FS") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Song Liu <songliubraving@fb.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Qian Cai <cai@lca.pw> Link: https://lkml.kernel.org/r/20200903183029.14930-4-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e753a8 upstream. The following test case reproduces an issue of wrongly freeing in-use blocks on the readonly seed device when fstrim is called on the rw sprout device. As shown below. Create a seed device and add a sprout device to it: $ mkfs.btrfs -fq -dsingle -msingle /dev/loop0 $ btrfstune -S 1 /dev/loop0 $ mount /dev/loop0 /btrfs $ btrfs dev add -f /dev/loop1 /btrfs BTRFS info (device loop0): relocating block group 290455552 flags system BTRFS info (device loop0): relocating block group 1048576 flags system BTRFS info (device loop0): disk added /dev/loop1 $ umount /btrfs Mount the sprout device and run fstrim: $ mount /dev/loop1 /btrfs $ fstrim /btrfs $ umount /btrfs Now try to mount the seed device, and it fails: $ mount /dev/loop0 /btrfs mount: /btrfs: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error. Block 5292032 is missing on the readonly seed device: $ dmesg -kt | tail <snip> BTRFS error (device loop0): bad tree block start, want 5292032 have 0 BTRFS warning (device loop0): couldn't read-tree root BTRFS error (device loop0): open_ctree failed >From the dump-tree of the seed device (taken before the fstrim). Block 5292032 belonged to the block group starting at 5242880: $ btrfs inspect dump-tree -e /dev/loop0 | grep -A1 BLOCK_GROUP <snip> item 3 key (5242880 BLOCK_GROUP_ITEM 8388608) itemoff 16169 itemsize 24 block group used 114688 chunk_objectid 256 flags METADATA <snip> >From the dump-tree of the sprout device (taken before the fstrim). fstrim used block-group 5242880 to find the related free space to free: $ btrfs inspect dump-tree -e /dev/loop1 | grep -A1 BLOCK_GROUP <snip> item 1 key (5242880 BLOCK_GROUP_ITEM 8388608) itemoff 16226 itemsize 24 block group used 32768 chunk_objectid 256 flags METADATA <snip> BPF kernel tracing the fstrim command finds the missing block 5292032 within the range of the discarded blocks as below: kprobe:btrfs_discard_extent { printf("freeing start %llu end %llu num_bytes %llu:\n", arg1, arg1+arg2, arg2); } freeing start 5259264 end 5406720 num_bytes 147456 <snip> Fix this by avoiding the discard command to the readonly seed device. Reported-by: Chris Murphy <lists@colorremedies.com> CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0884335 upstream. Drop bits 63:32 on loads/stores to/from DRs and CRs when the vCPU is not in 64-bit mode. The APM states bits 63:32 are dropped for both DRs and CRs: In 64-bit mode, the operand size is fixed at 64 bits without the need for a REX prefix. In non-64-bit mode, the operand size is fixed at 32 bits and the upper 32 bits of the destination are forced to 0. Fixes: 7ff76d5 ("KVM: SVM: enhance MOV CR intercept handler") Fixes: cae3797 ("KVM: SVM: enhance mov DR intercept handler") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210422022128.3464144-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [sudip: manual backport to old file] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cb853de upstream. Commit 03fdfb2 ("KVM: arm64: Don't write junk to sysregs on reset") flipped the register number to 0 for all the debug registers in the sysreg table, hereby indicating that these registers live in a separate shadow structure. However, the author of this patch failed to realise that all the accessors are using that particular index instead of the register encoding, resulting in all the registers hitting index 0. Not quite a valid implementation of the architecture... Address the issue by fixing all the accessors to use the CRm field of the encoding, which contains the debug register index. Fixes: 03fdfb2 ("KVM: arm64: Don't write junk to sysregs on reset") Reported-by: Ricardo Koller <ricarkol@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b79fef upstream. Various PV features (Async PF, PV EOI, steal time) work through memory shared with hypervisor and when we restore from hibernation we must properly teardown all these features to make sure hypervisor doesn't write to stale locations after we jump to the previously hibernated kernel (which can try to place anything there). For secondary CPUs the job is already done by kvm_cpu_down_prepare(), register syscore ops to do the same for boot CPU. Krzysztof: This fixes memory corruption visible after second resume from hibernation: BUG: Bad page state in process dbus-daemon pfn:18b01 page:ffffea000062c040 refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 compound_mapcount: -30591 flags: 0xfffffc0078141(locked|error|workingset|writeback|head|mappedtodisk|reclaim) raw: 000fffffc0078141 dead0000000002d0 dead000000000100 0000000000000000 raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_PREP flag set bad because of flags: 0x78141(locked|error|workingset|writeback|head|mappedtodisk|reclaim) Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210414123544.1060604-3-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrea Righi <andrea.righi@canonical.com> [krzysztof: Extend the commit message] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c02027b upstream. Currenly, we disable kvmclock from machine_shutdown() hook and this only happens for boot CPU. We need to disable it for all CPUs to guard against memory corruption e.g. on restore from hibernate. Note, writing '0' to kvmclock MSR doesn't clear memory location, it just prevents hypervisor from updating the location so for the short while after write and while CPU is still alive, the clock remains usable and correct so we don't need to switch to some other clocksource. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210414123544.1060604-4-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d6b841 upstream. Crash shutdown handler only disables kvmclock and steal time, other PV features remain active so we risk corrupting memory or getting some side-effects in kdump kernel. Move crash handler to kvm.c and unify with CPU offline. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210414123544.1060604-5-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89b1586 upstream. LZ4 final literal copy could be overlapped when doing in-place decompression, so it's unsafe to just use memcpy() on an optimized memcpy approach but memmove() instead. Upstream LZ4 has updated this years ago [1] (and the impact is non-sensible [2] plus only a few bytes remain), this commit just synchronizes LZ4 upstream code to the kernel side as well. It can be observed as EROFS in-place decompression failure on specific files when X86_FEATURE_ERMS is unsupported, memcpy() optimization of commit 59daa70 ("x86, mem: Optimize memcpy by avoiding memory false dependece") will be enabled then. Currently most modern x86-CPUs support ERMS, these CPUs just use "rep movsb" approach so no problem at all. However, it can still be verified with forcely disabling ERMS feature... arch/x86/lib/memcpy_64.S: ALTERNATIVE_2 "jmp memcpy_orig", "", X86_FEATURE_REP_GOOD, \ - "jmp memcpy_erms", X86_FEATURE_ERMS + "jmp memcpy_orig", X86_FEATURE_ERMS We didn't observe any strange on arm64/arm/x86 platform before since most memcpy() would behave in an increasing address order ("copy upwards" [3]) and it's the correct order of in-place decompression but it really needs an update to memmove() for sure considering it's an undefined behavior according to the standard and some unique optimization already exists in the kernel. [1] lz4/lz4@33cb851 [2] lz4/lz4#717 (comment) [3] https://sourceware.org/bugzilla/show_bug.cgi?id=12518 Link: https://lkml.kernel.org/r/20201122030749.2698994-1-hsiangkao@redhat.com Signed-off-by: Gao Xiang <hsiangkao@redhat.com> Reviewed-by: Nick Terrell <terrelln@fb.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Li Guifu <bluce.liguifu@huawei.com> Cc: Guo Xuenan <guoxuenan@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit referenced below was incomplete: It merely affected what would get written to the vdev-<N> xenstore node. The guest would still find the function at the original function number as long as __xen_pcibk_get_pci_dev() wouldn't be in sync. The same goes for AER wrt __xen_pcibk_get_pcifront_dev(). Undo overriding the function to zero and instead make sure that VFs at function zero remain alone in their slot. This has the added benefit of improving overall capacity, considering that there's only a total of 32 slots available right now (PCI segment and bus can both only ever be zero at present). This is upstream commit 4ba50e7. Fixes: 8a5248f ("xen PV passthru: assign SR-IOV virtual functions to separate virtual slots") Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/8def783b-404c-3452-196d-3f3fd4d72c9e@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 57648e8 upstream. Mark bus as suspended during system suspend to block the future transfers. Implement geni_i2c_resume_noirq() to resume the bus. Fixes: 37692de ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller") Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a6b1ab upstream. IFF_POINTOPOINT interfaces use NUD_NOARP entries for IPv6. It's possible to fill up the neighbour table with enough entries that it will overflow for valid connections after that. This behaviour is more prevalent after commit 5895631 ("neighbor: Improve garbage collection") is applied, as it prevents removal from entries that are not NUD_FAILED, unless they are more than 5s old. Fixes: 5895631 (neighbor: Improve garbage collection) Reported-by: Kasper Dupont <kasperd@gjkwv.06.feb.2021.kasperd.net> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210608175935.254388043@linuxfoundation.org Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Jason Self <jason@bluehome.net> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the 5.4.125 stable release Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
zandrey
added a commit
to zandrey/meta-freescale
that referenced
this pull request
Sep 21, 2021
Kernel repository has been upgraded up to v5.4.125 from stable korg. Following upstream commits are included in this version: ---- 3909e2374335 Linux 5.4.125 d99029e6aab6 neighbour: allow NUD_NOARP entries to be forced GCed 8e0bb29446d1 i2c: qcom-geni: Suspend and resume the bus during SYSTEM_SLEEP_PM ops bdc17b2f8264 xen-pciback: redo VF placement in the virtual topology defcc2b5e54a lib/lz4: explicitly support in-place decompression 97e814e6b5cd x86/kvm: Disable all PV features on crash 9084fe1b3572 x86/kvm: Disable kvmclock on all CPUs on shutdown 7620a669111b x86/kvm: Teardown PV features on boot CPU as well f82030a586a1 KVM: arm64: Fix debug register indexing 2295e87a5e39 KVM: SVM: Truncate GPR value for DR and CR accesses in !64-bit mode 0450af01ae7e btrfs: fix unmountable seed device after fstrim 3b7f3cab1d47 mm/filemap: fix storing to a THP shadow entry 0a890e220954 XArray: add xas_split 03a390d8796d XArray: add xa_get_order fd8e06a7a723 mm: add thp_order f192885f7cee bnxt_en: Remove the setting of dev_port. 14fd3da3e8d3 mm, hugetlb: fix simple resv_huge_pages underflow on UFFDIO_COPY 6d4da27bd9ef btrfs: fixup error handling in fixup_inode_link_counts dad974d2494a btrfs: return errors from btrfs_del_csums in cleanup_ref_head 0fd9149a82e3 btrfs: fix error handling in btrfs_del_csums 295859a55549 btrfs: mark ordered extent and inode with error if we fail to finish 12ca65539b04 x86/apic: Mark _all_ legacy interrupts when IO/APIC is missing b0c0d8b5bf94 drm/amdgpu: make sure we unpin the UVD BO 24c06e5452c3 drm/amdgpu: Don't query CE and UE errors 5d4c4b06ed9f nfc: fix NULL ptr dereference in llcp_sock_getname() after failed connect cc2edb99ea60 ocfs2: fix data corruption by fallocate 2cd6eedfa634 pid: take a reference when initializing `cad_pid` fe4e0bd4c26c usb: dwc2: Fix build in periphal-only mode 920697b004e4 ext4: fix bug on in ext4_es_cache_extent as ext4_split_extent_at failed 52fc8f05c158 ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators 2cac47eed455 ARM: dts: imx6dl-yapp4: Fix RGMII connection to QCA8334 switch d349ff008cb3 ALSA: hda: Fix for mute key LED for HP Pavilion 15-CK0xx 0afd601d8e0a ALSA: timer: Fix master timer notification d65bc969ec8b HID: multitouch: require Finger field to mark Win8 reports as MT 368c5d45a87e HID: magicmouse: fix NULL-deref on disconnect 142d5ca797a9 HID: i2c-hid: Skip ELAN power-on command after reset 4d94f530cd24 net: caif: fix memory leak in cfusbl_device_notify f52f4fd67264 net: caif: fix memory leak in caif_device_notify c97cdb70b72d net: caif: add proper error handling 64824f626c0c net: caif: added cfserl_release function b6f97555c71f Bluetooth: use correct lock to prevent UAF of hdev object 8d3d0ac73a4a Bluetooth: fix the erroneous flush_work() order 28efacc21d2a tipc: fix unique bearer names sanity check 9ac67fdf64e0 tipc: add extack messages for bearer/media failure 0fa160a75748 bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act 22ea29c39717 ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells 5b97dd983255 ARM: dts: imx7d-pico: Fix the 'tuning-step' property 55fa22d1d8b2 ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' property 3a559111bd10 arm64: dts: zii-ultra: fix 12V_MAIN voltage f78c28a0dda1 arm64: dts: ls1028a: fix memory node 3616dd03bc43 i40e: add correct exception tracing for XDP adfd6355fc8b i40e: optimize for XDP_REDIRECT in xsk path 06f667dba42e i2c: qcom-geni: Add shutdown callback for i2c de37510ec67d ice: Allow all LLDP packets from PF to Tx bafd0a7461f0 ice: Fix VFR issues for AVF drivers that expect ATQLEN cleared 3583ab29177c ice: write register with correct offset 7ba7fa78a92d ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions 112533f50c7e ixgbevf: add correct exception tracing for XDP b5cc02c6986f ieee802154: fix error return code in ieee802154_llsec_getparams() 4ca8aa37cb43 ieee802154: fix error return code in ieee802154_add_iface() 66f3ab065b70 netfilter: nfnetlink_cthelper: hit EBUSY on updates if size mismatches da8d31e80ff4 netfilter: nft_ct: skip expectations for confirmed conntrack 14c0381e2639 ACPICA: Clean up context mutex during object deletion 8e8678936f0d net/sched: act_ct: Fix ct template allocation for zone 0 385e1861f31b HID: i2c-hid: fix format string mismatch 279e2136dd21 HID: pidff: fix error return code in hid_pidff_init() c8a95cb0c02d ipvs: ignore IP_VS_SVC_F_HASHED flag when adding service 087b803a5b49 vfio/platform: fix module_put call in error flow 60dcad10e2c7 samples: vfio-mdev: fix error handing in mdpy_fb_probe() 870973918b2a vfio/pci: zap_vma_ptes() needs MMU 5da371c3fdfb vfio/pci: Fix error return code in vfio_ecap_init() a4ed60297770 efi: cper: fix snprintf() use in cper_dimm_err_location() bc8f6647a73c efi: Allow EFI_MEMORY_XP and EFI_MEMORY_RO both to be cleared 2986fdd3211f netfilter: conntrack: unregister ipv4 sockopts on error unwind 90870b45fc62 hwmon: (dell-smm-hwmon) Fix index values 0338fa4af9f3 nl80211: validate key indexes for cfg80211_registered_device e9487a498753 ALSA: usb: update old-style static const declaration aaa41b3094ea net: usb: cdc_ncm: don't spew notifications 96a40c3fa3d3 btrfs: tree-checker: do not error out if extent ref hash doesn't match ---- Link: https://lore.kernel.org/r/20210608175935.254388043@linuxfoundation.org # v5.4.125 Link: Freescale/linux-fslc#366 Signed-off-by: Andrey Zhizhikin <andrey.z@gmail.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Automatic merge performed, no conflicts reported.
Kernel has been built for both aarch64 (
defconfig) and arm32 (imx_v6_v7_defconfig).-- andrey