Update uv-build requirement from <0.9.0,>=0.8.3 to >=0.8.3,<0.10.0

[dependabot]

Updates the requirements on uv-build to permit the latest version.

Release notes

Sourced from uv-build's releases.

0.9.0

Release Notes

Released on 2025-10-07.

This breaking release is primarily motivated by the release of Python 3.14, which contains some breaking changes (we recommend reading the "What's new in Python 3.14" page). uv may use Python 3.14 in cases where it previously used 3.13, e.g., if you have not pinned your Python version and do not have any Python versions installed on your machine. While we think this is uncommon, we prefer to be cautious. We've included some additional small changes that could break workflows.

See our Python 3.14 blog post for some discussion of features we're excited about!

There are no breaking changes to uv_build. If you have an upper bound in your [build-system] table, you should update it.

Breaking changes

• Python 3.14 is now the default stable version

  The default Python version has changed from 3.13 to 3.14. This applies to Python version installation when no Python version is requested, e.g., uv python install. By default, uv will use the system Python version if present, so this may not cause changes to general use of uv. For example, if Python 3.13 is installed already, then uv venv will use that version. If no Python versions are installed on a machine and automatic downloads are enabled, uv will now use 3.14 instead of 3.13, e.g., for uv venv or uvx python. This change will not affect users who are using a .python-version file to pin to a specific Python version.

• Allow use of free-threaded variants in Python 3.14+ without explicit opt-in (#16142)

  Previously, free-threaded variants of Python were considered experimental and required explicit opt-in (i.e., with 3.14t) for usage. Now uv will allow use of free-threaded Python 3.14+ interpreters without explicit selection. The GIL-enabled build of Python will still be preferred, e.g., when performing an installation with uv python install 3.14. However, e.g., if a free-threaded interpreter comes before a GIL-enabled build on the PATH, it will be used. This change does not apply to free-threaded Python 3.13 interpreters, which will continue to require opt-in.

• Use Python 3.14 stable Docker images (#16150)

  Previously, the Python 3.14 images had an -rc suffix, e.g., python:3.14-rc-alpine or python:3.14-rc-trixie. Now, the -rc suffix has been removed to match the stable upstream images. The -rc images tags will no longer be updated. This change should not break existing workflows.

• Upgrade Alpine Docker image to Alpine 3.22

  Previously, the uv:alpine Docker image was based on Alpine 3.21. Now, this image is based on Alpine 3.22. The previous image can be recovered with uv:alpine3.21 and will continue to be updated until a future release.

• Upgrade Debian Docker images to Debian 13 "Trixie"

  Previously, the uv:debian and uv:debian-slim Docker images were based on Debian 12 "Bookworm". Now, these images are based on Debian 13 "Trixie". The previous images can be recovered with uv:bookworm and uv:bookworm-slim and will continue to be updated until a future release.

• Fix incorrect output path when a trailing / is used in uv build (#15133)

  When using uv build in a workspace, the artifacts are intended to be written to a dist directory in the workspace root. A bug caused workspace root determination to fail when the input path included a trailing / causing the dist directory to be placed in the child directory. This bug has been fixed in this release. For example, uv build child/ is used, the output path will now be in <workspace root>/dist/ rather than <workspace root>/child/dist/.

Python

• Add CPython 3.14.0
• Add CPython 3.13.8

Enhancements

• Don't warn when a dependency is constrained by another dependency (#16149)

Bug fixes

... (truncated)

Changelog

Sourced from uv-build's changelog.

0.9.0

Released on 2025-10-07.

This breaking release is primarily motivated by the release of Python 3.14, which contains some breaking changes (we recommend reading the "What's new in Python 3.14" page). uv may use Python 3.14 in cases where it previously used 3.13, e.g., if you have not pinned your Python version and do not have any Python versions installed on your machine. While we think this is uncommon, we prefer to be cautious. We've included some additional small changes that could break workflows.

See our Python 3.14 blog post for some discussion of features we're excited about!

There are no breaking changes to uv_build. If you have an upper bound in your [build-system] table, you should update it.

Breaking changes

• Python 3.14 is now the default stable version

  The default Python version has changed from 3.13 to 3.14. This applies to Python version installation when no Python version is requested, e.g., uv python install. By default, uv will use the system Python version if present, so this may not cause changes to general use of uv. For example, if Python 3.13 is installed already, then uv venv will use that version. If no Python versions are installed on a machine and automatic downloads are enabled, uv will now use 3.14 instead of 3.13, e.g., for uv venv or uvx python. This change will not affect users who are using a .python-version file to pin to a specific Python version.

• Allow use of free-threaded variants in Python 3.14+ without explicit opt-in (#16142)

  Previously, free-threaded variants of Python were considered experimental and required explicit opt-in (i.e., with 3.14t) for usage. Now uv will allow use of free-threaded Python 3.14+ interpreters without explicit selection. The GIL-enabled build of Python will still be preferred, e.g., when performing an installation with uv python install 3.14. However, e.g., if a free-threaded interpreter comes before a GIL-enabled build on the PATH, it will be used. This change does not apply to free-threaded Python 3.13 interpreters, which will continue to require opt-in.

• Use Python 3.14 stable Docker images (#16150)

  Previously, the Python 3.14 images had an -rc suffix, e.g., python:3.14-rc-alpine or python:3.14-rc-trixie. Now, the -rc suffix has been removed to match the stable upstream images. The -rc images tags will no longer be updated. This change should not break existing workflows.

• Upgrade Alpine Docker image to Alpine 3.22

  Previously, the uv:alpine Docker image was based on Alpine 3.21. Now, this image is based on Alpine 3.22. The previous image can be recovered with uv:alpine3.21 and will continue to be updated until a future release.

• Upgrade Debian Docker images to Debian 13 "Trixie"

  Previously, the uv:debian and uv:debian-slim Docker images were based on Debian 12 "Bookworm". Now, these images are based on Debian 13 "Trixie". The previous images can be recovered with uv:bookworm and uv:bookworm-slim and will continue to be updated until a future release.

• Fix incorrect output path when a trailing / is used in uv build (#15133)

  When using uv build in a workspace, the artifacts are intended to be written to a dist directory in the workspace root. A bug caused workspace root determination to fail when the input path included a trailing / causing the dist directory to be placed in the child directory. This bug has been fixed in this release. For example, uv build child/ is used, the output path will now be in <workspace root>/dist/ rather than <workspace root>/child/dist/.

Python

• Add CPython 3.14.0
• Add CPython 3.13.8

Enhancements

• Don't warn when a dependency is constrained by another dependency (#16149)

Bug fixes

... (truncated)

Commits

• 39b6886 Bump version to 0.9.0 (#16161)
• 5936780 Publish Python 3.14 Docker Images (#16150)
• 2f7bb7e Promote trixie and alpine 3.22 as default tags (#15352)
• df0a12d Fix uv python upgrade replacement of installed binaries on pre-release to s...
• 3a507e6 Ban pre-release versions in uv python upgrade requests (#16160)
• 37b3557 Sync latest Python releases (#16157)
• 61b8eae Fix uv python upgrade / install output when there is a no-op for one reques...
• 9214855 fix compile error on missing uv-python metadata (#16154)
• 111ed6f Update uv pip compile args in layout.md (#16155)
• 83f7380 Allow use of free-threaded variants in Python 3.14+ without explicit opt-in (...
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)