[Device Support Request] Circuit Breaker 63A with Power Monitoring and Threshold TS011F | _TZ3000_lepzuhto

[giball]

Problem description

Electrical measurements in this device not working properly - current and summation delivered (kWh) are too high.

Solution description

Please correct the current multiplier

Screenshots/Video

Screenshots/Video

[Paste/upload your

media here]

Device signature

Device signature

"node_descriptor": "NodeDescriptor(logical_type=<LogicalType.Router: 1>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.FullFunctionDevice|MainsPowered|RxOnWhenIdle|AllocateAddress: 142>, manufacturer_code=4098, maximum_buffer_size=82, maximum_incoming_transfer_size=82, server_mask=11264, maximum_outgoing_transfer_size=82, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=False, *is_full_function_device=True, *is_mains_powered=True, *is_receiver_on_when_idle=True, *is_router=True, *is_security_capable=False)",
  "endpoints": {
    "1": {
      "profile_id": "0x0104",
      "device_type": "0x010a",
      "input_clusters": [
        "0x0000",
        "0x0003",
        "0x0004",
        "0x0005",
        "0x0006",
        "0x0402",
        "0x0702",
        "0x0b04",
        "0xe000",
        "0xe001"
      ],
      "output_clusters": [
        "0x000a",
        "0x0019"
      ]
    },
    "242": {
      "profile_id": "0xa1e0",
      "device_type": "0x0061",
      "input_clusters": [],
      "output_clusters": [
        "0x0021"
      ]
    }
  },
  "manufacturer": "_TZ3000_lepzuhto",
  "model": "TS011F",
  "class": "zigpy.device.Device"

Diagnostic information

Diagnostic information

[{
  "home_assistant": {
    "installation_type": "Home Assistant OS",
    "version": "2023.10.3",
    "dev": false,
    "hassio": true,
    "virtualenv": false,
    "python_version": "3.11.5",
    "docker": true,
    "arch": "aarch64",
    "timezone": "Europe/Warsaw",
    "os_name": "Linux",
    "os_version": "6.1.21-v8",
    "supervisor": "2023.10.0",
    "host_os": "Home Assistant OS 11.0",
    "docker_version": "24.0.6",
    "chassis": "embedded",
    "run_as_root": true
  },
  "custom_components": {
    "toyota": {
      "version": "1.2.11",
      "requirements": [
        "mytoyota==0.7.8",
        "arrow"
      ]
    },
    "hon": {
      "version": "0.6.5",
      "requirements": []
    },
    "hacs": {
      "version": "1.33.0",
      "requirements": [
        "aiogithubapi>=22.10.1"
      ]
    }
  },
  "integration_manifest": {
    "domain": "zha",
    "name": "Zigbee Home Automation",
    "after_dependencies": [
      "onboarding",
      "usb"
    ],
    "codeowners": [
      "@dmulcahey",
      "@adminiuga",
      "@puddly"
    ],
    "config_flow": true,
    "dependencies": [
      "file_upload"
    ],
    "documentation": "https://www.home-assistant.io/integrations/zha",
    "iot_class": "local_polling",
    "loggers": [
      "aiosqlite",
      "bellows",
      "crccheck",
      "pure_pcapy3",
      "zhaquirks",
      "zigpy",
      "zigpy_deconz",
      "zigpy_xbee",
      "zigpy_zigate",
      "zigpy_znp",
      "universal_silabs_flasher"
    ],
    "requirements": [
      "bellows==0.36.5",
      "pyserial==3.5",
      "pyserial-asyncio==0.6",
      "zha-quirks==0.0.104",
      "zigpy-deconz==0.21.1",
      "zigpy==0.57.2",
      "zigpy-xbee==0.18.3",
      "zigpy-zigate==0.11.0",
      "zigpy-znp==0.11.5",
      "universal-silabs-flasher==0.0.14",
      "pyserial-asyncio-fast==0.11"
    ],
    "usb": [
      {
        "vid": "10C4",
        "pid": "EA60",
        "description": "*2652*",
        "known_devices": [
          "slae.sh cc2652rb stick"
        ]
      },
      {
        "vid": "1A86",
        "pid": "55D4",
        "description": "*sonoff*plus*",
        "known_devices": [
          "sonoff zigbee dongle plus v2"
        ]
      },
      {
        "vid": "10C4",
        "pid": "EA60",
        "description": "*sonoff*plus*",
        "known_devices": [
          "sonoff zigbee dongle plus"
        ]
      },
      {
        "vid": "10C4",
        "pid": "EA60",
        "description": "*tubeszb*",
        "known_devices": [
          "TubesZB Coordinator"
        ]
      },
      {
        "vid": "1A86",
        "pid": "7523",
        "description": "*tubeszb*",
        "known_devices": [
          "TubesZB Coordinator"
        ]
      },
      {
        "vid": "1A86",
        "pid": "7523",
        "description": "*zigstar*",
        "known_devices": [
          "ZigStar Coordinators"
        ]
      },
      {
        "vid": "1CF1",
        "pid": "0030",
        "description": "*conbee*",
        "known_devices": [
          "Conbee II"
        ]
      },
      {
        "vid": "10C4",
        "pid": "8A2A",
        "description": "*zigbee*",
        "known_devices": [
          "Nortek HUSBZB-1"
        ]
      },
      {
        "vid": "0403",
        "pid": "6015",
        "description": "*zigate*",
        "known_devices": [
          "ZiGate+"
        ]
      },
      {
        "vid": "10C4",
        "pid": "EA60",
        "description": "*zigate*",
        "known_devices": [
          "ZiGate"
        ]
      },
      {
        "vid": "10C4",
        "pid": "8B34",
        "description": "*bv 2010/10*",
        "known_devices": [
          "Bitron Video AV2010/10"
        ]
      }
    ],
    "zeroconf": [
      {
        "type": "_esphomelib._tcp.local.",
        "name": "tube*"
      },
      {
        "type": "_zigate-zigbee-gateway._tcp.local.",
        "name": "*zigate*"
      },
      {
        "type": "_zigstar_gw._tcp.local.",
        "name": "*zigstar*"
      },
      {
        "type": "_uzg-01._tcp.local.",
        "name": "uzg-01*"
      },
      {
        "type": "_slzb-06._tcp.local.",
        "name": "slzb-06*"
      }
    ],
    "is_built_in": true
  },
  "data": {
    "ieee": "**REDACTED**",
    "nwk": 30405,
    "manufacturer": "_TZ3000_lepzuhto",
    "model": "TS011F",
    "name": "_TZ3000_lepzuhto TS011F",
    "quirk_applied": false,
    "quirk_class": "zigpy.device.Device",
    "manufacturer_code": 4098,
    "power_source": "Mains",
    "lqi": 255,
    "rssi": -52,
    "last_seen": "2023-10-16T22:42:32",
    "available": true,
    "device_type": "Router",
    "signature": {
      "node_descriptor": "NodeDescriptor(logical_type=<LogicalType.Router: 1>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.FullFunctionDevice|MainsPowered|RxOnWhenIdle|AllocateAddress: 142>, manufacturer_code=4098, maximum_buffer_size=82, maximum_incoming_transfer_size=82, server_mask=11264, maximum_outgoing_transfer_size=82, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=False, *is_full_function_device=True, *is_mains_powered=True, *is_receiver_on_when_idle=True, *is_router=True, *is_security_capable=False)",
      "endpoints": {
        "1": {
          "profile_id": "0x0104",
          "device_type": "0x010a",
          "input_clusters": [
            "0x0000",
            "0x0003",
            "0x0004",
            "0x0005",
            "0x0006",
            "0x0402",
            "0x0702",
            "0x0b04",
            "0xe000",
            "0xe001"
          ],
          "output_clusters": [
            "0x000a",
            "0x0019"
          ]
        },
        "242": {
          "profile_id": "0xa1e0",
          "device_type": "0x0061",
          "input_clusters": [],
          "output_clusters": [
            "0x0021"
          ]
        }
      },
      "manufacturer": "_TZ3000_lepzuhto",
      "model": "TS011F"
    },
    "active_coordinator": false,
    "entities": [
      {
        "entity_id": "button.tz3000_lepzuhto_ts011f_identify",
        "name": "_TZ3000_lepzuhto TS011F"
      },
      {
        "entity_id": "sensor.tz3000_lepzuhto_ts011f_rms_current",
        "name": "_TZ3000_lepzuhto TS011F"
      },
      {
        "entity_id": "sensor.tz3000_lepzuhto_ts011f_rms_voltage",
        "name": "_TZ3000_lepzuhto TS011F"
      },
      {
        "entity_id": "sensor.tz3000_lepzuhto_ts011f_power_factor",
        "name": "_TZ3000_lepzuhto TS011F"
      },
      {
        "entity_id": "sensor.tz3000_lepzuhto_ts011f_temperature",
        "name": "_TZ3000_lepzuhto TS011F"
      },
      {
        "entity_id": "sensor.tz3000_lepzuhto_ts011f_active_power",
        "name": "_TZ3000_lepzuhto TS011F"
      },
      {
        "entity_id": "sensor.tz3000_lepzuhto_ts011f_summation_delivered",
        "name": "_TZ3000_lepzuhto TS011F"
      },
      {
        "entity_id": "switch.tz3000_lepzuhto_ts011f_switch",
        "name": "_TZ3000_lepzuhto TS011F"
      }
    ],
    "neighbors": [
      {
        "device_type": "Coordinator",
        "rx_on_when_idle": "On",
        "relationship": "Sibling",
        "extended_pan_id": "**REDACTED**",
        "ieee": "**REDACTED**",
        "nwk": "0x0000",
        "permit_joining": "Unknown",
        "depth": "0",
        "lqi": "155"
      },
      {
        "device_type": "Router",
        "rx_on_when_idle": "On",
        "relationship": "Sibling",
        "extended_pan_id": "**REDACTED**",
        "ieee": "**REDACTED**",
        "nwk": "0x1FB0",
        "permit_joining": "Unknown",
        "depth": "15",
        "lqi": "106"
      },
      {
        "device_type": "Router",
        "rx_on_when_idle": "On",
        "relationship": "Sibling",
        "extended_pan_id": "**REDACTED**",
        "ieee": "**REDACTED**",
        "nwk": "0x32BF",
        "permit_joining": "Unknown",
        "depth": "15",
        "lqi": "127"
      },
      {
        "device_type": "Router",
        "rx_on_when_idle": "On",
        "relationship": "Sibling",
        "extended_pan_id": "**REDACTED**",
        "ieee": "**REDACTED**",
        "nwk": "0x5636",
        "permit_joining": "Unknown",
        "depth": "15",
        "lqi": "97"
      },
      {
        "device_type": "Router",
        "rx_on_when_idle": "On",
        "relationship": "Sibling",
        "extended_pan_id": "**REDACTED**",
        "ieee": "**REDACTED**",
        "nwk": "0x71DA",
        "permit_joining": "Unknown",
        "depth": "15",
        "lqi": "150"
      },
      {
        "device_type": "Router",
        "rx_on_when_idle": "On",
        "relationship": "Parent",
        "extended_pan_id": "**REDACTED**",
        "ieee": "**REDACTED**",
        "nwk": "0x88F5",
        "permit_joining": "Unknown",
        "depth": "15",
        "lqi": "204"
      },
      {
        "device_type": "Router",
        "rx_on_when_idle": "On",
        "relationship": "Sibling",
        "extended_pan_id": "**REDACTED**",
        "ieee": "**REDACTED**",
        "nwk": "0x9F02",
        "permit_joining": "Unknown",
        "depth": "15",
        "lqi": "102"
      },
      {
        "device_type": "Router",
        "rx_on_when_idle": "On",
        "relationship": "Sibling",
        "extended_pan_id": "**REDACTED**",
        "ieee": "**REDACTED**",
        "nwk": "0xA7DA",
        "permit_joining": "Unknown",
        "depth": "15",
        "lqi": "84"
      },
      {
        "device_type": "Router",
        "rx_on_when_idle": "On",
        "relationship": "Sibling",
        "extended_pan_id": "**REDACTED**",
        "ieee": "**REDACTED**",
        "nwk": "0xF2E1",
        "permit_joining": "Unknown",
        "depth": "15",
        "lqi": "151"
      }
    ],
    "routes": [
      {
        "dest_nwk": "0x0000",
        "route_status": "Active",
        "memory_constrained": false,
        "many_to_one": true,
        "route_record_required": false,
        "next_hop": "0x0000"
      }
    ],
    "endpoint_names": [
      {
        "name": "ON_OFF_PLUG_IN_UNIT"
      },
      {
        "name": "PROXY_BASIC"
      }
    ],
    "user_given_name": null,
    "device_reg_id": "97403dfa4589b6825af226e1eb663b7d",
    "area_id": null,
    "cluster_details": {
      "1": {
        "device_type": {
          "name": "ON_OFF_PLUG_IN_UNIT",
          "id": 266
        },
        "profile_id": 260,
        "in_clusters": {
          "0x0000": {
            "endpoint_attribute": "basic",
            "attributes": {
              "0x0004": {
                "attribute_name": "manufacturer",
                "value": "_TZ3000_lepzuhto"
              },
              "0x0005": {
                "attribute_name": "model",
                "value": "TS011F"
              }
            },
            "unsupported_attributes": {}
          },
          "0x0003": {
            "endpoint_attribute": "identify",
            "attributes": {},
            "unsupported_attributes": {}
          },
          "0x0004": {
            "endpoint_attribute": "groups",
            "attributes": {},
            "unsupported_attributes": {}
          },
          "0x0005": {
            "endpoint_attribute": "scenes",
            "attributes": {},
            "unsupported_attributes": {}
          },
          "0x0006": {
            "endpoint_attribute": "on_off",
            "attributes": {
              "0x4002": {
                "attribute_name": "off_wait_time",
                "value": 0
              },
              "0x0000": {
                "attribute_name": "on_off",
                "value": 1
              },
              "0x4001": {
                "attribute_name": "on_time",
                "value": 0
              }
            },
            "unsupported_attributes": {
              "0x4003": {
                "attribute_name": "start_up_on_off"
              }
            }
          },
          "0x0702": {
            "endpoint_attribute": "smartenergy_metering",
            "attributes": {
              "0x0000": {
                "attribute_name": "current_summ_delivered",
                "value": 5954
              },
              "0x0306": {
                "attribute_name": "metering_device_type",
                "value": 0
              },
              "0x0200": {
                "attribute_name": "status",
                "value": 0
              },
              "0x0303": {
                "attribute_name": "summation_formatting",
                "value": 0
              },
              "0x0300": {
                "attribute_name": "unit_of_measure",
                "value": 0
              }
            },
            "unsupported_attributes": {
              "0x0400": {
                "attribute_name": "instantaneous_demand"
              },
              "0x0100": {
                "attribute_name": "current_tier1_summ_delivered"
              },
              "0x0102": {
                "attribute_name": "current_tier2_summ_delivered"
              },
              "0x0302": {
                "attribute_name": "divisor"
              },
              "0x0104": {
                "attribute_name": "current_tier3_summ_delivered"
              },
              "0x0304": {
                "attribute_name": "demand_formatting"
              },
              "0x0106": {
                "attribute_name": "current_tier4_summ_delivered"
              },
              "0x0301": {
                "attribute_name": "multiplier"
              },
              "0x0108": {
                "attribute_name": "current_tier5_summ_delivered"
              },
              "0x010a": {
                "attribute_name": "current_tier6_summ_delivered"
              }
            }
          },
          "0x0b04": {
            "endpoint_attribute": "electrical_measurement",
            "attributes": {
              "0x050b": {
                "attribute_name": "active_power",
                "value": 198
              },
              "0x0508": {
                "attribute_name": "rms_current",
                "value": 1049
              },
              "0x0505": {
                "attribute_name": "rms_voltage",
                "value": 238
              }
            },
            "unsupported_attributes": {
              "0x0300": {
                "attribute_name": "ac_frequency"
              },
              "0x0601": {
                "attribute_name": "ac_voltage_divisor"
              },
              "0x0302": {
                "attribute_name": "ac_frequency_max"
              },
              "0x0603": {
                "attribute_name": "ac_current_divisor"
              },
              "0x0602": {
                "attribute_name": "ac_current_multiplier"
              },
              "0x0605": {
                "attribute_name": "ac_power_divisor"
              },
              "0x0604": {
                "attribute_name": "ac_power_multiplier"
              },
              "0x0507": {
                "attribute_name": "rms_voltage_max"
              },
              "0x0600": {
                "attribute_name": "ac_voltage_multiplier"
              },
              "0x0401": {
                "attribute_name": "ac_frequency_divisor"
              },
              "0x050a": {
                "attribute_name": "rms_current_max"
              },
              "0x0000": {
                "attribute_name": "measurement_type"
              },
              "0x050d": {
                "attribute_name": "active_power_max"
              },
              "0x050f": {
                "attribute_name": "apparent_power"
              },
              "0x0402": {
                "attribute_name": "power_multiplier"
              },
              "0x0400": {
                "attribute_name": "ac_frequency_multiplier"
              },
              "0x0403": {
                "attribute_name": "power_divisor"
              }
            }
          },
          "0x0402": {
            "endpoint_attribute": "temperature",
            "attributes": {
              "0x0000": {
                "attribute_name": "measured_value",
                "value": 3058
              }
            },
            "unsupported_attributes": {}
          },
          "0xe000": {
            "endpoint_attribute": null,
            "attributes": {},
            "unsupported_attributes": {}
          },
          "0xe001": {
            "endpoint_attribute": null,
            "attributes": {},
            "unsupported_attributes": {}
          }
        },
        "out_clusters": {
          "0x0019": {
            "endpoint_attribute": "ota",
            "attributes": {},
            "unsupported_attributes": {}
          },
          "0x000a": {
            "endpoint_attribute": "time",
            "attributes": {},
            "unsupported_attributes": {}
          }
        }
      },
      "242": {
        "device_type": {
          "name": "PROXY_BASIC",
          "id": 97
        },
        "profile_id": 41440,
        "in_clusters": {},
        "out_clusters": {
          "0x0021": {
            "endpoint_attribute": "green_power",
            "attributes": {},
            "unsupported_attributes": {}
          }
        }
      }
    }
  }
}]

Logs

Logs

[Paste the logs here]

Custom quirk

Custom quirk

[Paste your custom quirk here]

Additional information

No response

[Pajuris]

Tongou TO-Q-SY2-163JZT - TS011F _TZ3000_cayepv1a.

Wrong amperes (always show 62-63), wrong measurements (kWh), no threshold.

[apolloathome]

Same problem with Tongou TO-Q-SY2-163JZT - TS011F _TZ3000_cayepv1a

{
"node_descriptor": "NodeDescriptor(logical_type=<LogicalType.Router: 1>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.FullFunctionDevice|MainsPowered|RxOnWhenIdle|AllocateAddress: 142>, manufacturer_code=4098, maximum_buffer_size=82, maximum_incoming_transfer_size=82, server_mask=11264, maximum_outgoing_transfer_size=82, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=False, *is_full_function_device=True, *is_mains_powered=True, *is_receiver_on_when_idle=True, *is_router=True, *is_security_capable=False)",
"endpoints": {
"1": {
"profile_id": "0x0104",
"device_type": "0x010a",
"input_clusters": [
"0x0000",
"0x0003",
"0x0004",
"0x0005",
"0x0006",
"0x0402",
"0x0702",
"0x0b04",
"0xe000",
"0xe001"
],
"output_clusters": [
"0x000a",
"0x0019"
]
},
"242": {
"profile_id": "0xa1e0",
"device_type": "0x0061",
"input_clusters": [],
"output_clusters": [
"0x0021"
]
}
},
"manufacturer": "_TZ3000_cayepv1a",
"model": "TS011F",
"class": "zigpy.device.Device"
}

Ampere is x 1000

Cumulated power is x 100 Edit on 29 march 24

[dartvader1234]

TS011F by _TZ3000_cayepv1a
Same problem but different values:

• Current in ampere is x1000 so it indicates 10000 Amperes with 10 Amperes load
• The cumulated "summation delivered" in kWh is x100 (not x1000), so 200 kWh indicated with 2 kWh.
• Power in Watt is ok.

[MnM001]

If we are talking abut the same device (TO-Q-SY2-163JZT) , and I think we are, the integration into ZHA needs a lot of work.
The wrong measurements needs to be fixed, however, there are lot of things missing from this device in ZHA. Zigbee2mqtt has all of them covered.

As it is right now this device function as TO-Q-SY1 device, which is just a normal breaker with an ON/OFF button and displaying some power values.
The TO-Q-SY2-163JZT is a different product in the sense that it had all the features of the TO-Q-SY1 device plus more:

• temperature protection
• over current protection
• over voltage protection
• under voltage protection
• high power protection
• timing

This is the zigbee2mqtt page for this device:

https://www.zigbee2mqtt.io/devices/TO-Q-SY2-163JZT.html

Will be good to see the same kind of functionality in ZHA too because with out that it will just acts like a dumb TO-Q-SY1 device offering no protection at all.

The pic below shows what this device exposes in zigbee2mqtt:

[liouma]

Hello, I just received this device.
The problem we all face is double:

1. x1000 A
2. x2 power

@dartvader1234 : you correctly detected the problem (1). You should have a look at the following discussion. Someone had the same problem with another device and solved (1) with a custom quirck (but not (2)).
#2364

The problem (2) was identified in the thread above but not solved. If you check P=UI you will see that the power value is incorrect. Are everyone here using 220v? Anyone using 11v? The guess from the other thread is that TUYA calculate power from 110v.
I can not confirm, the only thing I can say is that there is a x2 error (as the rule P=UI prove it).

I hope someone will be able to write a custom quirck inspired from this one:
#2364

[liouma]

9After some more testing, here are more info.
1/ about the custom quirk from this thread: #2364 I can say that Current, Voltage and Power values are correct. I measured current and voltage. Then P=UI rule is verified with the displayed power value. (did not test yet summation delivered). -> the custom quirk is good, that would be great if someone could adapt it here!

2/ about the values measured by _TZ3000_cayepv1a:
Values displayed in HA are:

• Current: 194A
• voltage 237v
• power 23W

Value measured with an external tool (simple AC clamp meter) = 0.130A

Let's simplify for now and says that there is a x1000 factor. There will still be a huge difference between 130 and 194. Can it be explained by the relatively low current and the method (AC clamp)?? Later I'll connect an amperemeter to get a more precise value.
But already we can say that the info displayed by HA are:

• current: mA and not A -> need to do a value = value/1000
• power should be 46 (0.194x237). Correction needed: value=value x 2
• summation delivered: at 18h15 value was approximately 4. At 22h35 -> 13. In 4h20=4,33h value increased by 9. 4,33/9=0.48. As I said my calculation is an approximation as I read value from graphs. So 0.48 is probably 0.46. But my power was 23 and we now from previous line that I should read 23x2=46. So there is a x100 factor (as written by dartvader1234 previously). So correction needed: value=value/50. Instead of 9kWh I spent 0.18kWh (much more realistic for 3x15W bulbs during 4h).

Unfortunately I'm not able to write a custom quirk. I hope those info will help someone write one on the basis of this one: custom quirk for tuya clamp

For all others: you can make a simple correction using templates

[liouma]

• The cumulated "summation delivered" in kWh is x100 (not x1000), so 200 kWh indicated with 2 kWh.
• Power in Watt is ok.

@dartvader1234: can you please double check your power value? are your sure you do not read a value/2 ??
Are you using 110v or 220v ? -> if you are in 110v that could explain why your value is correct and mine /2

[apolloathome]

TS011F by _TZ3000_cayepv1a Same problem but different values:

• Current in ampere is x1000 so it indicates 10000 Amperes with 10 Amperes load
• The cumulated "summation delivered" in kWh is x100 (not x1000), so 200 kWh indicated with 2 kWh.
• Power in Watt is ok.

You are rigth, me wrong, cumulated power is x 100

[mortiy]

Hi,
Just want to add that there are two more fingerprints for this device:
_TZ3000_cayepv1a and _TZ3000_qystbcjg

Taken from here:
https://github.com/Vorta/zigbee-herdsman-converters/blob/master/src/devices/tuya.ts#L4805

[apolloathome]

Thank you mortiy. 👍

[Milhauz666]

I have TO-Q-SY2-JZT - TS011F _TZ3000_cayepv1a with SimpleDescriptor(endpoint=1, profile=260, device_type=266, device_version=1, input_clusters=[0, 3, 4, 5, 6, 1794, 2820, 1026, 57344, 57345], output_clusters=[25, 10]), which is using the default quirk "zigpy.device.Device",

There is a quirk for similar device _TZ3000_qeuvnohg having the same descriptor, but with slightly reordered clusters:

# <SimpleDescriptor endpoint=1 profile=260 device_type=266
            # device_version=1
            # input_clusters=[0, 3, 4, 5, 6, 1026, 1794, 2820, 57344, 57345]
            # output_clusters=[10, 25]>

I suppose tweaking this quirk should help to identify the _TZ3000_cayepv1a device properly?

[neildsb]

Hi, please excuse the simple question, I too have this device (TO-Q-SY2-163JZT) and am using ZHA, and have noticed the lack of exposed sensors compared to Zigbee2mqtt (within this thread), will this be updated/rectified overtime, are there manual interventions/configuration changes needed to identify the current product? I am primarily using the switching function (noted the wrong current values) the other sensors are nice to have. Thanks in advance…

[meremortals70]

Another vote for fixing this please.