boards: shields: add suport for st_b_cams_omv_mb1683

Add support for ST B-CAMS-OMV MB1683 shield.

Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>

boards/shields/st_b_cams_omv_mb1683/Kconfig.defconfig

@@ -0,0 +1,10 @@
+# Copyright (c) 2024 Charles Dias <charlesdias.cd@outlook.com>
+# SPDX-License-Identifier: Apache-2.0
+
+if SHIELD_ST_B_CAMS_OMV_MB1683
+
+# Enable the STM32 DCMI driver as the camera interface requires it.
+config VIDEO_STM32_DCMI
+	default y
+
+endif # SHIELD_ST_B_CAMS_OMV_MB1683

boards/shields/st_b_cams_omv_mb1683/Kconfig.shield

@@ -0,0 +1,5 @@
+# Copyright (c) 2024 Charles Dias <charlesdias.cd@outlook.com>
+# SPDX-License-Identifier: Apache-2.0
+
+config SHIELD_ST_B_CAMS_OMV_MB1683
+	def_bool $(shields_list_contains,st_b_cams_omv_mb1683)

boards/shields/st_b_cams_omv_mb1683/boards/stm32h7b3i_dk.overlay

@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2024 Charles Dias <charlesdias.cd@outlook.com>
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ */
+
+&i2c4 {
+	pinctrl-0 = <&i2c4_scl_pd12 &i2c4_sda_pd13>;
+	pinctrl-names = "default";
+	status = "okay";
+	clock-frequency = <I2C_BITRATE_FAST>;
+
+	ov5640: ov5640@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		status = "okay";
+		reset-gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
+		powerdown-gpios = <&gpioa 7 GPIO_ACTIVE_HIGH>;
+
+		port {
+			ov5640_ep_out: endpoint {
+				compatible = "zephyr,video-interfaces";
+				remote-endpoint-label = "dcmi_ep_in";
+				bus-type = "parallel";
+			};
+		};
+	};
+};
+
+&dcmi {
+	pinctrl-0 = <&dcmi_hsync_pa4 &dcmi_pixclk_pa6 &dcmi_vsync_pb7
+		&dcmi_d0_pc6 &dcmi_d1_pc7 &dcmi_d2_pg10 &dcmi_d3_pc9
+		&dcmi_d4_pc11 &dcmi_d5_pd3 &dcmi_d6_pb8 &dcmi_d7_pb9>;
+	pinctrl-names = "default";
+
+	dmas = <&dma1 0 75 (STM32_DMA_PERIPH_TO_MEMORY | STM32_DMA_PERIPH_NO_INC |
+		STM32_DMA_MEM_INC | STM32_DMA_PERIPH_8BITS | STM32_DMA_MEM_32BITS |
+		STM32_DMA_PRIORITY_HIGH) STM32_DMA_FIFO_1_4>;
+};
+
+&dma1 {
+	status = "okay";
+};
+
+&dmamux1 {
+	status = "okay";
+};

boards/shields/st_b_cams_omv_mb1683/doc/index.rst

@@ -0,0 +1,115 @@
+.. _st_b_cams_omv_mb1683:
+
+ST B-CAMS-OMV-MB1683
+####################
+
+Overview
+********
+
+The camera module bundle (B-CAMS-OMV) provides extension connectors
+for the MB1379 STMicroelectronics camera module daughterboard or
+third-party modules like OpenMV and Waveshare modules. It can be used
+with the STM32 boards featuring a 1 x 30 pin ZIF connector for the
+connection of multiple cameras to implement computer vision on STM32
+microcontrollers easily.
+
+The camera module bundle is compatible with all STM32 Discovery kits and
+Evaluation boards featuring a ZIF connector, such as the STM32H747I-DISCO,
+STM32H7B3I-DK, and 32L4R9IDISCOVERY Discovery kits.
+
+.. figure:: st_b_cams_omv.webp
+     :width: 600px
+     :align: center
+     :alt: B-CAMS-OMV-MB1683
+
+     B-CAMS-OMV MB1683 Image (Credit: STMicroelectronics.)
+
+Waveshare camera board connector CN4
+*************************************
+
++------------+-----------------+------------+--------------+
+| Pin number | Description     | Pin number | Description  |
++============+=================+============+==============+
+| 1          | GND             | 2          | VCAM         |
++------------+-----------------+------------+--------------+
+| 3          | I2C_SDA         | 4          | I2C_SCL      |
++------------+-----------------+------------+--------------+
+| 5          | DCMI_HSYNC      | 6          | DCMI_VSYNC   |
++------------+-----------------+------------+--------------+
+| 7          | Camera_CLK      | 8          | DCMI_PIXCLK  |
++------------+-----------------+------------+--------------+
+| 9          | DCMI_D6         | 10         | DCMI_D7      |
++------------+-----------------+------------+--------------+
+| 11         | DCMI_D4         | 12         | DCMI_D5      |
++------------+-----------------+------------+--------------+
+| 13         | DCMI_D2         | 14         | DCMI_D3      |
++------------+-----------------+------------+--------------+
+| 15         | DCMI_D0         | 16         | DCMI_D1      |
++------------+-----------------+------------+--------------+
+| 17         | PWR_EN / LED1   | 18         | RESET#       |
++------------+-----------------+------------+--------------+
+
+ZIF connector CN5
+*****************
+
++------------+--------------+------------+--------------+
+| Pin number | Description  | Pin number | Description  |
++============+==============+============+==============+
+| 1          | 3V3          | 16         | DCMI_PIXCK   |
++------------+--------------+------------+--------------+
+| 2          | GND          | 17         | GND          |
++------------+--------------+------------+--------------+
+| 3          | I2C_SCL      | 18         | SPI_MISO     |
++------------+--------------+------------+--------------+
+| 4          | I2C_SDA      | 19         | SPI_CS       |
++------------+--------------+------------+--------------+
+| 5          | RESET#       | 20         | DCMI_D7      |
++------------+--------------+------------+--------------+
+| 6          | PWR_EN / LED1| 21         | DCMI_D6      |
++------------+--------------+------------+--------------+
+| 7          | SHUTTER      | 22         | DCMI_D5      |
++------------+--------------+------------+--------------+
+| 8          | GND          | 23         | DCMI_D4      |
++------------+--------------+------------+--------------+
+| 9          | PULLDOWN / LED2 | 24      | DCMI_D3      |
++------------+--------------+------------+--------------+
+| 10         | Camera_CLK   | 25         | DCMI_D2      |
++------------+--------------+------------+--------------+
+| 11         | 3V3          | 26         | DCMI_D1      |
++------------+--------------+------------+--------------+
+| 12         | DCMI_VSYNC   | 27         | DCMI_D0      |
++------------+--------------+------------+--------------+
+| 13         | 5V (RSU)     | 28         | SPI_MOSI     |
++------------+--------------+------------+--------------+
+| 14         | DCMI_HSYNC   | 29         | SPI_CLK      |
++------------+--------------+------------+--------------+
+| 15         | GND          | 30         | GND          |
++------------+--------------+------------+--------------+
+
+Requirements
+************
+
+Your board needs to have a ``dcmi`` device tree label to work with this shield.
+
+Usage
+*****
+
+The shield can be used in any application by setting ``SHIELD`` to
+``_st_b_cams_omv_mb1683`` and adding the necessary device tree properties.
+
+Set ``--shield "_st_b_cams_omv_mb1683"`` when you invoke ``west build``. For example:
+
+.. zephyr-app-commands::
+   :zephyr-app: samples/drivers/video/capture_to_lvgl
+   :board: stm32h7b3i_dk
+   :shield: st_b_cams_omv_mb1683
+   :goals: build
+
+References
+**********
+
+- `Product page <https://www.st.com/en/evaluation-tools/b-cams-omv.html>`_
+
+- `Databrief <https://www.st.com/resource/en/data_brief/b-cams-omv.pdf>`_
+
+- `User manual <https://www.st.com/resource/en/user_manual/um2779-camera-module-bundle-for-stm32-boards-stmicroelectronics.pdf>`_

boards/shields/st_b_cams_omv_mb1683/st_b_cams_omv_mb1683.overlay

@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2024 Charles Dias <charlesdias.cd@outlook.com>
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ */
+
+/ {
+	chosen {
+		zephyr,camera = &dcmi;
+	};
+};
+
+&dcmi {
+	status = "okay";
+	sensor = <&ov5640>;
+
+	bus-width = <8>;
+	hsync-active = <0>;
+	vsync-active = <0>;
+	pixelclk-active = <1>;
+	capture-rate = <1>;
+
+	port {
+		dcmi_ep_in: endpoint {
+			compatible = "zephyr,video-interfaces";
+			remote-endpoint-label = "ov5640_ep_out";
+		};
+	};
+};

samples/drivers/video/capture_to_lvgl/boards/stm32h7b3i_dk.conf

@@ -0,0 +1,13 @@
+#
+# Copyright (c) 2024 Charles Dias <charlesdias.cd@outlook.com>
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+
+CONFIG_LOG_BUFFER_SIZE=2048
+
+CONFIG_VIDEO_BUFFER_POOL_NUM_MAX=2
+
+CONFIG_VIDEO_WIDTH=480
+CONFIG_VIDEO_HEIGHT=272
+CONFIG_VIDEO_BUFFER_POOL_SZ_MAX=262144

samples/drivers/video/capture_to_lvgl/boards/stm32h7b3i_dk.overlay

@@ -0,0 +1,13 @@
+/*
+ * Copyright (c) 2024 Charles Dias <charlesdias.cd@outlook.com>
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ */
+
+/delete-node/ &sram1;
+/delete-node/ &sram2;
+
+&sram0 {
+	reg = <0x24000000 DT_SIZE_K(1024)>;
+};