This is a dual miner for Ethereum and AmoVeo. You can configure EthVeoDualMiner for many different hash rates of Ethereum and Amoveo:
- 75% of Amoveo plus 70% of Ethereum with -erat 128 and -vrat value from table below
- 98% of Ethminer plus 50-40% of AmoVeo with -erat 192 and -vrat value from table below
- 90% of Amoveo plus 15% of Ethereum with -erat 128 and -vrat 200
EthVeoDualMiner has builds for Windows and Ubuntu, and it works with both NVidia and AMD GPUs.
Optimal GPU model efficiency for -vrat is usually found by setting -erat 192, and then let -vrat auto-tune until the Ethereum hash rate drops below 98%. The console will print where the VeoRatio finalizes. This gives you the optimal GPU model efficiency. If you want very high AmoVeo hash rates instead of targetting maximum efficiency, you can set very high -vrat values manually.
The deafult settings of -erat at 128 and not setting -vrat values will put EthVeoDualMiner in a "AmoVeo greedy" mode. The -vrat will increase aggressively until AmoVeo hash rate has deminishing returns, and Ethereum hash rate will decrease significantly. On most GPU models, this configuration will auto-tune the -vrat values to 80-85% AmoVeo speed + 20-25% Ethereum hash rates.
Download EthVeoDualMiner Releases
- 75% of Amoveo plus 70% of Ethereum with -erat 128 and -vrat value from table below
- 98% of Ethminer plus 50-40% of AmoVeo with -erat 192 and -vrat value from table below
(It is recommended to test other -vrat values near these to see if these values are optimal for your mining rig. These are only guidelines.)
| GPU | -vrat |
|---|---|
| 1080TI | ?? |
| 1070TI | 40 |
| 1060 | 28 |
| Vega 64 | 25 |
| Vega 56 | 25 |
| Tesla M60 | 96 |
EthVeoDualMiner.exe -ewal ETH_ADDRESS -vwal AMOVEO_ADDRESS
- -ewal Ethereum Wallet
- -epool Ethereum Pool
- -epsw Ethereum Stratum Password
- -vwal AmoVeo Wallet
- -vpool AmoVeo Pool
- -vpsw AmoVeo Stratum Password
- -erat Ethereum Ratio controls Ethereum work versus AmoVeo. Default 128. Allowed Range: 60-256. Typical: 128 or 192
- -vrat AmoVeo Ratio controls Veo work amount per GPU thread. Default: Auto-tune. Allowed Range: 1-400+. Typical: 28-96
- -dveo Device List to Mine AmoVeo Only
- -dskip Device Skip List for no mining
- -pool Print pool info with New Work events
- -date Print timestamp with New Work events
EthVeoDualMiner.exe -ewal 0xF8991390e8089173C0365b6bf8e2dfdA54998BC8 -epool stratum+tcp://eu1.ethermine.org:4444 -vwal BOyTm/uIxBUfK5WFb3HA05mk+0kKUEMvrmLTmd/fYx/+g+lK+YmUeah08N63mCqvTieQS5mxXkhQ6SW1irdQbvc= -vpool stratum+tcp://stratum.amoveopool.com:8822
EthVeoDualMiner.exe -ewal 0xF8991390e8089173C0365b6bf8e2dfdA54998BC8 -epool stratum+tcp://eu1.ethermine.org:4444 -vwal BOyTm/uIxBUfK5WFb3HA05mk+0kKUEMvrmLTmd/fYx/+g+lK+YmUeah08N63mCqvTieQS5mxXkhQ6SW1irdQbvc= -vpool stratum+tcp://stratum.amoveopool.com:8822 -vrat 1:28,2:40 -dveo 3,4 -dskip 0,5 -date -pool
This example shows:
- Veo ratio (-vrat) of 28 on device 1, and 40 on device 2
- Only mine AmoVeo on device 2 and 3. (No Ethereum.)
- Do not use device 0 and 5 for any mining
- Print pool and timestamp info with New Work events
- NVidia GPU requires CUDA installed.
- AMD GPU require OpenCL installed.
- Windows release zips contain the required DLLs.
- Ubuntu requires these packages installed:
sudo apt-get install libcurl4-gnutls-dev libjansson-dev libssl-dev
- EthVeoDualMiner supports both Getwork and Stratum protocol for AmoVeo
- EthVeoDualMiner supports Stratum and ETH-Proxy protocols for Ethereum. It has been tested against Ethermine and DwarfPool.
This software has an effective total developer fee under 1%. It mines with a 0% Eth mining fee and a 2% AmoVeo mining fee.