Merge tag 'iommu-updates-v4.5' of git://git.kernel.org/pub/scm/linux/…

…kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:
 "The updates include:

   - Small code cleanups in the AMD IOMMUv2 driver

   - Scalability improvements for the DMA-API implementation of the AMD
     IOMMU driver.  This is just a starting point, but already showed
     some good improvements in my tests.

   - Removal of the unused Renesas IPMMU/IPMMUI driver

   - Updates for ARM-SMMU include:
      * Some fixes to get the driver working nicely on Broadcom hardware
      * A change to the io-pgtable API to indicate the unit in which to
        flush (all callers converted, with Ack from Laurent)
      * Use of devm_* for allocating/freeing the SMMUv3 buffers

   - Some other small fixes and improvements for other drivers"

* tag 'iommu-updates-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (46 commits)
  iommu/vt-d: Fix up error handling in alloc_iommu
  iommu/vt-d: Check the return value of iommu_device_create()
  iommu/amd: Remove an unneeded condition
  iommu/amd: Preallocate dma_ops apertures based on dma_mask
  iommu/amd: Use trylock to aquire bitmap_lock
  iommu/amd: Make dma_ops_domain->next_index percpu
  iommu/amd: Relax locking in dma_ops path
  iommu/amd: Initialize new aperture range before making it visible
  iommu/amd: Build io page-tables with cmpxchg64
  iommu/amd: Allocate new aperture ranges in dma_ops_alloc_addresses
  iommu/amd: Optimize dma_ops_free_addresses
  iommu/amd: Remove need_flush from struct dma_ops_domain
  iommu/amd: Iterate over all aperture ranges in dma_ops_area_alloc
  iommu/amd: Flush iommu tlb in dma_ops_free_addresses
  iommu/amd: Rename dma_ops_domain->next_address to next_index
  iommu/amd: Remove 'start' parameter from dma_ops_area_alloc
  iommu/amd: Flush iommu tlb in dma_ops_aperture_alloc()
  iommu/amd: Retry address allocation within one aperture
  iommu/amd: Move aperture_range.offset to another cache-line
  iommu/amd: Add dma_ops_aperture_alloc() function
  ...

Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt

@@ -7,7 +7,15 @@ connected to the IPMMU through a port called micro-TLB.
 
 Required Properties:
 
-  - compatible: Must contain "renesas,ipmmu-vmsa".
+  - compatible: Must contain SoC-specific and generic entries from below.
+
+    - "renesas,ipmmu-r8a73a4" for the R8A73A4 (R-Mobile APE6) IPMMU.
+    - "renesas,ipmmu-r8a7790" for the R8A7790 (R-Car H2) IPMMU.
+    - "renesas,ipmmu-r8a7791" for the R8A7791 (R-Car M2-W) IPMMU.
+    - "renesas,ipmmu-r8a7793" for the R8A7793 (R-Car M2-N) IPMMU.
+    - "renesas,ipmmu-r8a7794" for the R8A7794 (R-Car E2) IPMMU.
+    - "renesas,ipmmu-vmsa" for generic R-Car Gen2 VMSA-compatible IPMMU.
+
   - reg: Base address and size of the IPMMU registers.
   - interrupts: Specifiers for the MMU fault interrupts. For instances that
     support secure mode two interrupts must be specified, for non-secure and
@@ -27,7 +35,7 @@ node with the following property:
 Example: R8A7791 IPMMU-MX and VSP1-D0 bus master
 
 	ipmmu_mx: mmu@fe951000 {
-		compatible = "renasas,ipmmu-vmsa";
+		compatible = "renasas,ipmmu-r8a7791", "renasas,ipmmu-vmsa";
 		reg = <0 0xfe951000 0 0x1000>;
 		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 221 IRQ_TYPE_LEVEL_HIGH>;

drivers/iommu/Kconfig

@@ -263,81 +263,6 @@ config EXYNOS_IOMMU_DEBUG
 
 	  Say N unless you need kernel log message for IOMMU debugging.
 
-config SHMOBILE_IPMMU
-	bool
-
-config SHMOBILE_IPMMU_TLB
-	bool
-
-config SHMOBILE_IOMMU
-	bool "IOMMU for Renesas IPMMU/IPMMUI"
-	default n
-	depends on ARM && MMU
-	depends on ARCH_SHMOBILE || COMPILE_TEST
-	select IOMMU_API
-	select ARM_DMA_USE_IOMMU
-	select SHMOBILE_IPMMU
-	select SHMOBILE_IPMMU_TLB
-	help
-	  Support for Renesas IPMMU/IPMMUI. This option enables
-	  remapping of DMA memory accesses from all of the IP blocks
-	  on the ICB.
-
-	  Warning: Drivers (including userspace drivers of UIO
-	  devices) of the IP blocks on the ICB *must* use addresses
-	  allocated from the IPMMU (iova) for DMA with this option
-	  enabled.
-
-	  If unsure, say N.
-
-choice
-	prompt "IPMMU/IPMMUI address space size"
-	default SHMOBILE_IOMMU_ADDRSIZE_2048MB
-	depends on SHMOBILE_IOMMU
-	help
-	  This option sets IPMMU/IPMMUI address space size by
-	  adjusting the 1st level page table size. The page table size
-	  is calculated as follows:
-
-	      page table size = number of page table entries * 4 bytes
-	      number of page table entries = address space size / 1 MiB
-
-	  For example, when the address space size is 2048 MiB, the
-	  1st level page table size is 8192 bytes.
-
-	config SHMOBILE_IOMMU_ADDRSIZE_2048MB
-		bool "2 GiB"
-
-	config SHMOBILE_IOMMU_ADDRSIZE_1024MB
-		bool "1 GiB"
-
-	config SHMOBILE_IOMMU_ADDRSIZE_512MB
-		bool "512 MiB"
-
-	config SHMOBILE_IOMMU_ADDRSIZE_256MB
-		bool "256 MiB"
-
-	config SHMOBILE_IOMMU_ADDRSIZE_128MB
-		bool "128 MiB"
-
-	config SHMOBILE_IOMMU_ADDRSIZE_64MB
-		bool "64 MiB"
-
-	config SHMOBILE_IOMMU_ADDRSIZE_32MB
-		bool "32 MiB"
-
-endchoice
-
-config SHMOBILE_IOMMU_L1SIZE
-	int
-	default 8192 if SHMOBILE_IOMMU_ADDRSIZE_2048MB
-	default 4096 if SHMOBILE_IOMMU_ADDRSIZE_1024MB
-	default 2048 if SHMOBILE_IOMMU_ADDRSIZE_512MB
-	default 1024 if SHMOBILE_IOMMU_ADDRSIZE_256MB
-	default 512 if SHMOBILE_IOMMU_ADDRSIZE_128MB
-	default 256 if SHMOBILE_IOMMU_ADDRSIZE_64MB
-	default 128 if SHMOBILE_IOMMU_ADDRSIZE_32MB
-
 config IPMMU_VMSA
 	bool "Renesas VMSA-compatible IPMMU"
 	depends on ARM_LPAE

drivers/iommu/Makefile

@@ -22,7 +22,5 @@ obj-$(CONFIG_ROCKCHIP_IOMMU) += rockchip-iommu.o
 obj-$(CONFIG_TEGRA_IOMMU_GART) += tegra-gart.o
 obj-$(CONFIG_TEGRA_IOMMU_SMMU) += tegra-smmu.o
 obj-$(CONFIG_EXYNOS_IOMMU) += exynos-iommu.o
-obj-$(CONFIG_SHMOBILE_IOMMU) += shmobile-iommu.o
-obj-$(CONFIG_SHMOBILE_IPMMU) += shmobile-ipmmu.o
 obj-$(CONFIG_FSL_PAMU) += fsl_pamu.o fsl_pamu_domain.o
 obj-$(CONFIG_S390_IOMMU) += s390-iommu.o