openOcd stm32g0x 出现连接没有阻塞监听，只是监听了1秒就退出了导致无法下载hex内容

[liushuai05]

$ openocd -f ./ocd-stm32.cfg  -f target/stm32g0x.cfg 
Open On-Chip Debugger 0.12.0
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "swd". To override use 'transport select <transport>'.
Warn : Transport "swd" was already selected
swd
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Info : Using CMSIS-DAPv2 interface with VID:PID=0xc251:0xf00a, serial=1234
Info : CMSIS-DAP: SWD supported
Info : CMSIS-DAP: JTAG supported
Info : CMSIS-DAP: Atomic commands supported
Info : CMSIS-DAP: Test domain timer supported
Info : CMSIS-DAP: FW Version = 2.1.0
Info : CMSIS-DAP: Serial# = 1234
Info : CMSIS-DAP: Interface Initialised (SWD)
Info : SWCLK/TCK = 0 SWDIO/TMS = 1 TDI = 1 TDO = 0 nTRST = 0 nRESET = 1
Info : CMSIS-DAP: Interface ready
Info : clock speed 2000 kHz
Info : SWD DPIDR 0x0bc11477
$
$
$

并且好像设置的速率也没生效，stm32f0x是可以执行出1000khz的
ocd-stm32.cfg如下

# interface cmsis-dap
adapter driver cmsis-dap

source [find target/swj-dp.tcl]
source [find mem_helper.tcl]

adapter speed 1000
transport select swd
# source [find target/stm32g0x.cfg]

下面是stm32f 正常执行的

$ openocd -f ./ocd-stm32.cfg  -f target/stm32f0x.cfg 
Open On-Chip Debugger 0.12.0
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "swd". To override use 'transport select <transport>'.
Warn : Transport "swd" was already selected
swd
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Info : Using CMSIS-DAPv2 interface with VID:PID=0xc251:0xf00a, serial=1234
Info : CMSIS-DAP: SWD supported
Info : CMSIS-DAP: JTAG supported
Info : CMSIS-DAP: Atomic commands supported
Info : CMSIS-DAP: Test domain timer supported
Info : CMSIS-DAP: FW Version = 2.1.0
Info : CMSIS-DAP: Serial# = 1234
Info : CMSIS-DAP: Interface Initialised (SWD)
Info : SWCLK/TCK = 0 SWDIO/TMS = 1 TDI = 0 TDO = 0 nTRST = 0 nRESET = 1
Info : CMSIS-DAP: Interface ready
Info : clock speed 1000 kHz
....... f系列这里会一直等待 

[windowsair]

stm32g0x.cfg 的配置是否把速率给修改了？ 不要用 2M 的，直接用 10M 的试下