Add puppet doc for network::bond

manifests/bond.pp

@@ -4,6 +4,109 @@
 #
 # == Parameters
 #
+# === interface parameters
+#
+# [*ensure*]
+#
+# The ensure value for the bonding interface.
+#
+# Default: present
+#
+# [*ipaddress*]
+#
+# The IPv4 address of the interface.
+#
+# [*netmask*]
+#
+# The IPv4 network mask of the interface.
+#
+# [*method*]
+#
+# The network configuration method.
+#
+# [*onboot*]
+#
+# Whether to bring the interface up on boot.
+#
+# === bonding parameters
+#
+# [*slaves*]
+#
+# A list of slave interfaces to combine for the bonded interface.
+#
+# [*mode*]
+#
+# The interface bond mode. The value can be either the human readable term,
+# such as 'active-backup' or the numeric representation, such as '1'.
+#
+# Default: 'active-backup'
+#
+# Options:
+#   - balance-rr/0
+#   - active-backup/1
+#   - blancer-xor/2
+#   - broadcast/3
+#   - 802.3ad/4
+#   - balance-tlb/5
+#   - balance-alb/6
+#
+# [*miimon*]
+#
+# The MII link monitoring frequency in milliseconds.
+#
+# Default: 100
+#
+# [*downdelay*]
+#
+# The time in milliseconds, to wait before disabling a slave after a link
+# failure has been detected.
+#
+# Default: 200
+#
+# [*updelay*]
+#
+# The time in millisceonds to wait before enabling a slave after a link
+# recovery has been detected.
+#
+# [*lacp_rate*]
+#
+#
+# Option specifying the rate in which we'll ask our link partner to transmit
+# LACPDU packets in 802.3ad mode. Only applicable when mode is '802.3ad'.
+#
+# Options:
+#   - slow/0: Request partner to transmit LACPDUs every 30 seconds
+#   - fast/1: Request partner to transmit LACPDUs every 1 second
+#
+#
+# [*primary*]
+#
+# The primary interface to use when the mode is 'active-backup'. All other
+# interfaces will be offline by default. Only applicable when mode is '802.3ad'.
+#
+# Default: $slaves[0]
+#
+# [*primary_reselect*]
+#
+# Specifies the reselection policy for the primary slave. This affects how
+# the primary slave is chosen to become the active slave when failure of the
+# active slave or recovery of the primary slave occurs. This option is
+# designed to prevent flip-flopping between the primary slave and other slaves.
+#
+# Options:
+#   - always/0
+#   - better/1
+#   - failure/2
+#
+# [*xmit_hash_policy*]
+#
+# Selects the transmit hash policy to use for slave selection in balance-xor
+# and 802.3ad modes.
+#
+# Options:
+#   - layer2
+#   - layer2+3
+#   - layer3+4
 #
 # == Examples
 #