Ssavickiy (#47)

* Add TMC micro-steps sanity check (MarlinFirmware#17044)

Co-authored-by: Scott Lahteine <github@thinkyhead.com>

* Suppress thisItemNr warning (MarlinFirmware#17049)

* Don't define 'valptr' if unused (MarlinFirmware#17048)

* Fix ambiguous type

Co-Authored-By: Andrew Kroll <xxxajk@gmail.com>

* fix #33

* Fix G34 probing range/error bug (MarlinFirmware#17052)

* Default on/off for Power Loss Recovery (MarlinFirmware#17051)

* Fix nested comment warning (MarlinFirmware#17045)

* Keep name around for old configs

* Finish M900 updates

* Add single extruder LIN_ADVANCE test

* Neopixel on LPC uses GPIO toggling

* [cron] Bump distribution date (2020-03-03)

* Fix MMU test

* fix #34

* No more direct G28 calls

* Asynchronous M114 and (R)ealtime position option (MarlinFirmware#17032)

* Minor EEPROM cleanup

* Software SPI for 12864 fix #31

* fix #1

* General code cleanup

* mftest: Set machine name

* Fix EEPROM compile errors

* Use BED_MAXTEMP for PTC_MAX_BED_TEMP (MarlinFirmware#17061)

* Update FYSETC S6 pins/variants (MarlinFirmware#17056)

* Fix TEMP_PROBE_PIN for SKR 1.4

Co-Authored-By: Anthrix <anthrix@users.noreply.github.com>

* fix #36

* [cron] Bump distribution date (2020-03-04)

* fix #35 в основном за счет кеширования

* Move shared code to wait_for_bed_heating

* Avoid name conflict with 'UART'

* Allow Z_STOP_PIN override on SKR 1.4 (MarlinFirmware#17063)

* SAMD51 SoftwareSerial (MarlinFirmware#17041)

* [cron] Bump distribution date (2020-03-05)

* Move SENSORLESS_PROBING to the probes section

Fixes a bug with HAS_BED_PROBE not being set before use.

* Fix SKR test for ONBOARD SD

* Fix CI test for SENSORLESS_PROBING

* Define Z_MIN_PROBE_PIN for Cohesion 3D Remix

* Update Turkish language (MarlinFirmware#17070)

* Update Chinese (TW) language (MarlinFirmware#17071)

* [cron] Bump distribution date (2020-03-06)

* Add pins to the pins debug list

* Clean up pins debugging

* Fix M0/M1 message string

* Non-blocking Max7219 test pattern

* Change PID dummy value to NAN

Fixes MarlinFirmware#17078

* [cron] Bump distribution date (2020-03-07)

* Pins debug followup

* Max7219 init last

* Max7219 suspend/resume

* More pins debugging cleanup

* Emergency Parser dumb terminal compatibility

* Add / correct comments

* [cron] Bump distribution date (2020-03-08)

* More useful ENABLED / DISABLED macros (MarlinFirmware#17054)

* Revert that wack backoff

* More general SD_DETECT_INVERTED override

* [ToolChanger] Lock the current tool at power-up (MarlinFirmware#17093)

* Fixes for Z4 axis, CS pins (MarlinFirmware#17097)

* [cron] Bump distribution date (2020-03-09)

* fix #37

* Add debug logging for setup()

* Move 'last_pause_state' closer to usage

* Additional numtostr functions

* DOGM SPI delay is less common

* Make BOOTSCREEN_TIMEOUT generally available

* Ensure welcome message

* [cron] Bump distribution date (2020-03-10)

* SD_DETECT_INVERTED => SD_DETECT_STATE (MarlinFirmware#17112)

* Fix Z4 stepper indirection macros (MarlinFirmware#17107)

* Always look for PLR file, but more quickly

* Fix broken enqueue_P

* [cron] Bump distribution date (2020-03-11)

* Tweaks to finishSDPrinting (MarlinFirmware#17082)

* Fix G34, add HOME_AFTER_G34 option (MarlinFirmware#17108)

Co-authored-by: Scott Lahteine <github@thinkyhead.com>

* Fix pio environments for Anet 1.x (MarlinFirmware#17109)

* M220 print FR percentage (MarlinFirmware#17101)

* fix #38

* fix #23

* Announce SD file open

Requested in MarlinFirmware#17110

* Apply soft limits to joystick jogging (MarlinFirmware#17114)

* Fix and update DGUS displays (MarlinFirmware#17072)

* Revert Anet 1.x envs change (MarlinFirmware#17120)

* Non-const REMEMBER needed for RESTORE

* More explicit EEPROM types (MarlinFirmware#17127)

* Fix STM32 _WRITE macro parameter (MarlinFirmware#17121)

* Fix M810 macro multiple use

Fixes MarlinFirmware#17125

* [cron] Bump distribution date (2020-03-12)

* [cron] Bump distribution date (2020-03-13)

* Use arduinoststm32 3.x for FYSETC S6 (MarlinFirmware#17131)

* Fix BAUD_RATE_GCODE, etc. (MarlinFirmware#17135)

* Fix DUGS / DGUS typo

* Add OnPidTuning event to Malyan LCD (MarlinFirmware#17143)

All ExtUI LCDs need to keep up with ExtUI API changes.

* Shorten German BLTouch menu item names (MarlinFirmware#17151)

* Fix Emergency Parser stuck state

* Fix end of short (auto0.g) prints

* M0 Q preserve status

* Shorter paths to HAL, ExtUI (MarlinFirmware#17156)

* [cron] Bump distribution date (2020-03-14)

* Fix G26 corrupted position

* Apply loop shorthand macros (MarlinFirmware#17159)

* Quad Z leveling, G34 (R)ecalculate (MarlinFirmware#17122)

* Config version 020005

* Allow Tool Offset adjustments to have another digit of precision

Some of the items in the Tool Offset Adjustment menu (in particular, the Z Offset!!!) were only adjustable with .1mm accuracy.
This is not enough.    So the edit menu is switched to float52 to fix the issue.

* [cron] Bump distribution date (2020-03-15)

* Fix LCD progress bar

Fixes MarlinFirmware#17162

* Add EEPROM_BOOT_SILENT option

* Do later mounting of LCD-based SD

* Add a global machine state

* #39 - скорость и слои

* #35 improved

* Fix incorrect type on ubl_storage_slot (MarlinFirmware#17170)

* Fix Z after ABL Bilinear G29 with fade

Co-Authored-By: Alan T <interstellarmisfit@users.noreply.github.com>

* Fix G34 Z lower, extra "BLTOUCH" debug line (MarlinFirmware#17175)

* Configurable SLOWDOWN divisor (MarlinFirmware#17171)

* [cron] Bump distribution date (2020-03-16)

* Shorter LCD remaining time to prevent overlap (MarlinFirmware#17181)

* LPC1768 EEPROM fallback to flash, add overrides (MarlinFirmware#17184)

* Fix Z_MIN_PROBE_PIN on SKR 1.4 (MarlinFirmware#17187)

* [cron] Bump distribution date (2020-03-17)

* мелкие исправления

* Fix MKS SBASE 1.6 E1 heater pin (MarlinFirmware#17191)

* ARMED support for TMC UART, probe temp (MarlinFirmware#17186)

* Apply HAS_TMC_UART to pins files

* More decimal places for babystep / Z probe offset (MarlinFirmware#17195)

* Add Copymaster3D board (MarlinFirmware#17188)

* [cron] Bump distribution date (2020-03-18)

* Tweak some lambdas

* New Controller Fan options and M710 gcode (MarlinFirmware#17149)

* Implement CONTROLLER_FAN_USE_Z_ONLY

Followup to MarlinFirmware#17149

* Add M42 M, improve M43 (MarlinFirmware#17173)

* [cron] Bump distribution date (2020-03-19)

* #41 исправлена порча памяти в меню движения по оси Z

* Fix FYSETC mini 12864 init / glitches (MarlinFirmware#17209)

* [cron] Bump distribution date (2020-03-20)

* fix #41

* fix #26

* [cron] Bump distribution date (2020-03-21)

* Split up STM32 pins files (MarlinFirmware#17212)

* [cron] Bump distribution date (2020-03-22)

* Stay at v0.91 of USBComposite for STM32F1

* whitespace

* Use pin/port names for CHITU pins

* Add a pins formatting script

* Format some pins files

* fix #39

* Fix custom version file include

* Tweak serial port descriptions

* [cron] Bump distribution date (2020-03-23)

* Fix Copymaster Y_MAX pin (MarlinFirmware#17267)

* Fix CONTROLLER_FAN options compile

* Skip impossible PWM sanity-checks

* Fix an unused var warning

* Add USB serial support to SERIAL_PORT_2 on DUE (MarlinFirmware#17245)

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

* DGUS updates (MarlinFirmware#17260)

* Fix extra M114 output line

Fixes MarlinFirmware#17255

* [cron] Bump distribution date (2020-03-24)

* Delay after homing_backoff for CoreXY sensorless homing (MarlinFirmware#17273)

* Sanity-check CORE backlash axes (MarlinFirmware#17279)

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

* Fix limits on acceleration editing (MarlinFirmware#17280)

* Fix Emergency Parser on DUE (MarlinFirmware#17276)

Co-authored-by: Scott Lahteine <github@thinkyhead.com>

* Add SoftwareSerialM for MKS Robin (MarlinFirmware#17207)

* Sanity check CONTROLLERFAN_SECS

* Adjust for timing shift on Max7219 displays on AVR's

Something has shifted.   The previous timing delays on the Max7219 debug displays is too tight without this correction.
I suspect something has been optimized and roughly 50ns of needed setup and hold time has disappeared.
This corrects the issue and the display results are clean again.

* Update LCD timing on Formbot T-Rex 2+ machines

The code is slightly more optimized than it used to be and this has caused the setup and hold times on the Formbot T-Rex 2+ machines to be insufficient.   This change gives sufficient margin and the LCD Display is clean again.

* [cron] Bump distribution date (2020-03-25)

* Allow PID_DEBUG to be turned on and off (MarlinFirmware#17284)

M303 D will now toggle activation of PID_DEBUG output.   This allows the debug capability to be built into the firmware, but turned on and off as needed.

* M303 followup

- Put 'D' before other params for clean exit.
- Use serial on/off for debug status.

* Drop old comment

* [cron] Bump distribution date (2020-03-26)

* Use "dist" instead of "delta" for clarity

* Allow G2_PWM to be slimmer

* motion.cpp: HAS_DIST_MM_ARG

* Fix M0 unused var warning

* Update Russian language (MarlinFirmware#17290)

* Update Italian language (MarlinFirmware#17293)

* Tweak eeprom storage type

* Tweak ui.finish_status

* [cron] Bump distribution date (2020-03-27)

* small fixes after merge

* Fix SD finished ExtUI / host action (MarlinFirmware#17285)

* QSPI EEPROM for SAMD51 (MarlinFirmware#17292)

* Fix Stepper PWM menu (MarlinFirmware#17298)

* Store case light brightness in EEPROM (MarlinFirmware#17307)

* [cron] Bump distribution date (2020-03-28)

* Add Funmat HT V4.0 board support (MarlinFirmware#17305)

Co-authored-by: Scott Lahteine <github@thinkyhead.com>

* Limited backlash editing with Core kinematics (MarlinFirmware#17281)

* Simplify TWIBus debug

* Clean up user-wait, SD completion (MarlinFirmware#17315)

* fix #42

* Fix typo...

* [cron] Bump distribution date (2020-03-29)

* Fix Trigorilla 1.4 missing spaces

* Fix STM32F1 USB Composite Dependency

Co-authored-by: Lord-Quake <Lord-Quake@users.noreply.github.com>

* Fix extra unskew call

Fixes MarlinFirmware#17264

* do_pause_e_move => unscaled_e_move

* Minor HAL cleanup

* No unscaled_e_move for CNC

* Load balance some tests

* [cron] Bump distribution date (2020-03-30)

* [cron] Bump distribution date (2020-03-31)

* Pulldown for all FastIO headers

Co-Authored-By: borsegbr <borsegbr@users.noreply.github.com>

* Fix last arc segment

Co-Authored-By: ellensp <ellensp@hotmail.com>

* Additional TERN macros

* Fix Fysetc stm32flash usage (MarlinFirmware#17331)

* STM32F1: Restore M43 build support (MarlinFirmware#17336)

* Improve / fix FTDI EVE Touch UI (MarlinFirmware#17338)

- Fix timeout and debugging string
- Fix check for whether `LCD_TIMEOUT_TO_STATUS` is valid
- Fix incorrect debugging message
- Make capitalization of callbacks consistent.
- Allow Touch UI to use hardware SPI on Einsy boards
- Move print stats to About Printer page.
- More generic about screen with GPL license.
- Add missing handler for power loss event
- Less code duplication on status screen and main/advanced menu; more legible
- Reorganize advanced and main menu to add more features
- Hide home Z button when using Z_SAFE_HOMING
- Fix compilation errors when certain features enabled
- Fix missing labels in UI
- Improve color scheme
- Add new preheat menus
- Fix incorrect rendering of Marlin logo on boot
- Add Level X Axis and Auto calibrate buttons

* Shorten some internal pin names

* [cron] Bump distribution date (2020-04-01)

* Fix M710 report formatting (MarlinFirmware#17356)

* Fix extra TMC serial begin calls (MarlinFirmware#17351)

* [cron] Bump distribution date (2020-04-02)

* More 8 extruders (TMC) support

* Minor code cleanup

* Fix up 'system' includes

* Fix ESP32 eeprom flag

* Clean up UI declarations, apply TERN_

* fix #32

* fix #45

* voltage

* fix #33

* fix #33

* fix typo in #34

* уточнил оранжевый и желтый цвета под свой дисплей

* Переключил TMC2208 UART на 256 шагов вместо 16

* отключил интерполяцию для всех, принудительно 64 микрошага на экструдер, пересчитал шаги для бмг

* таймаут дисплея измени до 15 минут, отрабатывал не так как надо в начале печати

* Revert "Переключил TMC2208 UART на 256 шагов вместо 16"

This reverts commit c32f37f.

* Revert "отключил интерполяцию для всех, принудительно 64 микрошага на экструдер, пересчитал шаги для бмг"

This reverts commit 4b20493.

* вернул настройки tmc как было до экспериментов с микрошагами

* поправил под актуальный pid e

* fix #46

* 10 минут таймаут дисплея

* убрал la понизил скорость кулера на хотенде

* двигатели 900 ма

* Update Configuration_adv.h

* update

* Revert "Merge branch 'bugfix-2.0.x-UltiSteel-ssavickiy' into ssavickiy"

This reverts commit bd0938a, reversing
changes made to a95b5db.

Co-authored-by: Jason Smith <jason.inet@gmail.com>
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
Co-authored-by: ellensp <ellensp@hotmail.com>
Co-authored-by: Andrew Kroll <xxxajk@gmail.com>
Co-authored-by: Юрий Першин <ursoft2004@mail.ru>
Co-authored-by: jufimu12 <jufimu12@gmail.com>
Co-authored-by: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Co-authored-by: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Co-authored-by: thinkyhead <thinkyhead@users.noreply.github.com>
Co-authored-by: George Fu <nailao_5918@163.com>
Co-authored-by: Anthrix <anthrix@users.noreply.github.com>
Co-authored-by: MangaValk <patrickvalkmanga@hotmail.com>
Co-authored-by: Vert <vert@vertshobbies.com>
Co-authored-by: Daniel Kreuzhofer (@danieldotnet) <daniel@kreuzhofer.de>
Co-authored-by: Gurmeet Athwal <gurmeet.athwal@gmail.com>
Co-authored-by: Jamie <vector76@users.noreply.github.com>
Co-authored-by: BigTreeTech <38851044+bigtreetech@users.noreply.github.com>
Co-authored-by: nick-diel <35879080+nick-diel@users.noreply.github.com>
Co-authored-by: Erkan Colak <erkanc@gmx.de>
Co-authored-by: Roxy-3D <Roxy-3D@users.noreply.github.com>
Co-authored-by: Karl Andersson <karl@iaccess.se>
Co-authored-by: Alan T <interstellarmisfit@users.noreply.github.com>
Co-authored-by: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Co-authored-by: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Co-authored-by: Joe Prints <33383148+JoePrints@users.noreply.github.com>
Co-authored-by: RasmusAaen <rasmus@aaen.net>
Co-authored-by: rado79 <51396577+rado79@users.noreply.github.com>
Co-authored-by: mkpfalz <50922721+mkpfalz@users.noreply.github.com>
Co-authored-by: MarkMan0 <38912829+MarkMan0@users.noreply.github.com>
Co-authored-by: Acenotass <44540957+Acenotass@users.noreply.github.com>
Co-authored-by: Mathias Rasmussen <mathiasvr@gmail.com>
Co-authored-by: oscarsan1 <oscarsan1@users.noreply.github.com>
Co-authored-by: thisiskeithb <thisiskeithb@outlook.com>
Co-authored-by: Lord-Quake <Lord-Quake@users.noreply.github.com>
Co-authored-by: borsegbr <borsegbr@users.noreply.github.com>
Co-authored-by: Eric Ptak <trouch@trouch.com>
Co-authored-by: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Co-authored-by: Marcio T <mlt4356-github@yahoo.com>
Co-authored-by: Marcelo Castagna <margaale@users.noreply.github.com>
Co-authored-by: Simon Jouet <simon-jouet@users.noreply.github.com>
Co-authored-by: Юрий Першин <build@vmpsoft.com>

.editorconfig

@@ -0,0 +1,19 @@
+# editorconfig.org
+root = true
+
+[{*.patch,syntax_test_*}]
+trim_trailing_whitespace = false
+
+[{*.c,*.cpp,*.h}]
+charset = utf-8
+
+[{*.c,*.cpp,*.h,Makefile}]
+trim_trailing_whitespace = true
+insert_final_newline = true
+end_of_line = lf
+indent_style = space
+indent_size = 2
+
+[{*.py,*.conf,*.sublime-project}]
+indent_style = tab
+indent_size = 4

.github/workflows/test-builds.yml

@@ -29,29 +29,31 @@ jobs:
         - DUE
         - esp32
         - linux_native
-        - megaatmega2560
+        - mega2560
         - teensy31
         - teensy35
+        - SAMD51_grandcentral_m4
 
         # Extended AVR Environments
 
         - FYSETC_F6_13
-        - megaatmega1280
+        - mega1280
         - rambo
-        - sanguino_atmega1284p
-        - sanguino_atmega644p
+        - sanguino1284p
+        - sanguino644p
 
         # Extended STM32 Environments
 
-        - STM32F103RC_bigtree
-        - STM32F103RC_bigtree_USB
-        - STM32F103RE_bigtree
-        - STM32F103RE_bigtree_USB
+        - STM32F103RC_btt
+        - STM32F103RC_btt_USB
+        - STM32F103RE_btt
+        - STM32F103RE_btt_USB
         - STM32F103RC_fysetc
         - jgaurora_a5s_a1
         - STM32F103VE_longer
         - STM32F407VE_black
         - BIGTREE_SKR_PRO
+        - BIGTREE_GTR_V1_0
         - mks_robin
         - ARMED
         - FYSETC_S6
@@ -75,7 +77,6 @@ jobs:
         #- mks_robin_lite
         #- mks_robin_mini
         #- mks_robin_nano
-        #- SAMD51_grandcentral_m4
 
     steps:
 

.gitignore

@@ -1,6 +1,6 @@
 #
 # Marlin 3D Printer Firmware
-# Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+# Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 #
 # Based on Sprinter and grbl.
 # Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -146,6 +146,9 @@ Marlin/*/*/readme.txt
 Marlin/*/*/*/readme.txt
 Marlin/*/*/*/*/readme.txt
 
+# Secure Credentials
+Configuration_Secure.h
+
 #Visual Studio
 *.sln
 *.vcxproj