Merge tag 'wireless-drivers-next-for-davem-2018-07-23' of git://git.k…

…ernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.19

The first set of patches for 4.19. Only smaller features and bug
fixes, not really anything major. Also included are changes to
include/linux/bitfield.h, we agreed with Johannes that it makes sense
to apply them via wireless-drivers-next.

Major changes:

ath10k

* support channel 173

* fix spectral scan for QCA9984 and QCA9888 chipsets

ath6kl

* add support for Dell Wireless 1537

ti wlcore

* add support for runtime PM

* enable runtime PM autosuspend support

qtnfmac

* support changing MAC address

* enable source MAC address randomization support

libertas

* fix suspend and resume for SDIO cards

mt76

* add software DFS radar pattern detector for mt76x2 based devices
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/wireless/ath/ath10k/Kconfig

@@ -1,15 +1,15 @@
 config ATH10K
-        tristate "Atheros 802.11ac wireless cards support"
-        depends on MAC80211 && HAS_DMA
+	tristate "Atheros 802.11ac wireless cards support"
+	depends on MAC80211 && HAS_DMA
 	select ATH_COMMON
 	select CRC32
 	select WANT_DEV_COREDUMP
 	select ATH10K_CE
-        ---help---
-          This module adds support for wireless adapters based on
-          Atheros IEEE 802.11ac family of chipsets.
+	---help---
+	  This module adds support for wireless adapters based on
+	  Atheros IEEE 802.11ac family of chipsets.
 
-          If you choose to build a module, it'll be called ath10k.
+	  If you choose to build a module, it'll be called ath10k.
 
 config ATH10K_CE
 	bool
@@ -41,12 +41,12 @@ config ATH10K_USB
 	  work in progress and will not fully work.
 
 config ATH10K_SNOC
-        tristate "Qualcomm ath10k SNOC support (EXPERIMENTAL)"
-        depends on ATH10K && ARCH_QCOM
-        ---help---
-          This module adds support for integrated WCN3990 chip connected
-          to system NOC(SNOC). Currently work in progress and will not
-          fully work.
+	tristate "Qualcomm ath10k SNOC support (EXPERIMENTAL)"
+	depends on ATH10K && ARCH_QCOM
+	---help---
+	  This module adds support for integrated WCN3990 chip connected
+	  to system NOC(SNOC). Currently work in progress and will not
+	  fully work.
 
 config ATH10K_DEBUG
 	bool "Atheros ath10k debugging"

drivers/net/wireless/ath/ath10k/ce.c

@@ -1512,7 +1512,7 @@ ath10k_ce_alloc_src_ring_64(struct ath10k *ar, unsigned int ce_id,
 		ret = ath10k_ce_alloc_shadow_base(ar, src_ring, nentries);
 		if (ret) {
 			dma_free_coherent(ar->dev,
-					  (nentries * sizeof(struct ce_desc) +
+					  (nentries * sizeof(struct ce_desc_64) +
 					   CE_DESC_RING_ALIGN),
 					  src_ring->base_addr_owner_space_unaligned,
 					  base_addr);

drivers/net/wireless/ath/ath10k/ce.h

@@ -383,4 +383,46 @@ static inline u32 ath10k_ce_interrupt_summary(struct ath10k *ar)
 		return CE_INTERRUPT_SUMMARY;
 }
 
+/* Host software's Copy Engine configuration. */
+#define CE_ATTR_FLAGS 0
+
+/*
+ * Configuration information for a Copy Engine pipe.
+ * Passed from Host to Target during startup (one per CE).
+ *
+ * NOTE: Structure is shared between Host software and Target firmware!
+ */
+struct ce_pipe_config {
+	__le32 pipenum;
+	__le32 pipedir;
+	__le32 nentries;
+	__le32 nbytes_max;
+	__le32 flags;
+	__le32 reserved;
+};
+
+/*
+ * Directions for interconnect pipe configuration.
+ * These definitions may be used during configuration and are shared
+ * between Host and Target.
+ *
+ * Pipe Directions are relative to the Host, so PIPEDIR_IN means
+ * "coming IN over air through Target to Host" as with a WiFi Rx operation.
+ * Conversely, PIPEDIR_OUT means "going OUT from Host through Target over air"
+ * as with a WiFi Tx operation. This is somewhat awkward for the "middle-man"
+ * Target since things that are "PIPEDIR_OUT" are coming IN to the Target
+ * over the interconnect.
+ */
+#define PIPEDIR_NONE    0
+#define PIPEDIR_IN      1  /* Target-->Host, WiFi Rx direction */
+#define PIPEDIR_OUT     2  /* Host->Target, WiFi Tx direction */
+#define PIPEDIR_INOUT   3  /* bidirectional */
+
+/* Establish a mapping between a service/direction and a pipe. */
+struct service_to_pipe {
+	__le32 service_id;
+	__le32 pipedir;
+	__le32 pipenum;
+};
+
 #endif /* _CE_H_ */

drivers/net/wireless/ath/ath10k/core.c

@@ -41,10 +41,8 @@ static bool uart_print;
 static bool skip_otp;
 static bool rawmode;
 
-/* Enable ATH10K_FW_CRASH_DUMP_REGISTERS and ATH10K_FW_CRASH_DUMP_CE_DATA
- * by default.
- */
-unsigned long ath10k_coredump_mask = 0x3;
+unsigned long ath10k_coredump_mask = BIT(ATH10K_FW_CRASH_DUMP_REGISTERS) |
+				     BIT(ATH10K_FW_CRASH_DUMP_CE_DATA);
 
 /* FIXME: most of these should be readonly */
 module_param_named(debug_mask, ath10k_debug_mask, uint, 0644);
@@ -82,6 +80,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.hw_ops = &qca988x_ops,
 		.decap_align_bytes = 4,
 		.spectral_bin_discard = 0,
+		.spectral_bin_offset = 0,
 		.vht160_mcs_rx_highest = 0,
 		.vht160_mcs_tx_highest = 0,
 		.n_cipher_suites = 8,
@@ -113,6 +112,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.hw_ops = &qca988x_ops,
 		.decap_align_bytes = 4,
 		.spectral_bin_discard = 0,
+		.spectral_bin_offset = 0,
 		.vht160_mcs_rx_highest = 0,
 		.vht160_mcs_tx_highest = 0,
 		.n_cipher_suites = 8,
@@ -145,6 +145,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.hw_ops = &qca988x_ops,
 		.decap_align_bytes = 4,
 		.spectral_bin_discard = 0,
+		.spectral_bin_offset = 0,
 		.vht160_mcs_rx_highest = 0,
 		.vht160_mcs_tx_highest = 0,
 		.n_cipher_suites = 8,
@@ -176,6 +177,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.hw_ops = &qca988x_ops,
 		.decap_align_bytes = 4,
 		.spectral_bin_discard = 0,
+		.spectral_bin_offset = 0,
 		.vht160_mcs_rx_highest = 0,
 		.vht160_mcs_tx_highest = 0,
 		.n_cipher_suites = 8,
@@ -207,6 +209,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.hw_ops = &qca988x_ops,
 		.decap_align_bytes = 4,
 		.spectral_bin_discard = 0,
+		.spectral_bin_offset = 0,
 		.vht160_mcs_rx_highest = 0,
 		.vht160_mcs_tx_highest = 0,
 		.n_cipher_suites = 8,
@@ -238,6 +241,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.hw_ops = &qca988x_ops,
 		.decap_align_bytes = 4,
 		.spectral_bin_discard = 0,
+		.spectral_bin_offset = 0,
 		.vht160_mcs_rx_highest = 0,
 		.vht160_mcs_tx_highest = 0,
 		.n_cipher_suites = 8,
@@ -272,6 +276,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.target_cpu_freq = 176000000,
 		.decap_align_bytes = 4,
 		.spectral_bin_discard = 0,
+		.spectral_bin_offset = 0,
 		.vht160_mcs_rx_highest = 0,
 		.vht160_mcs_tx_highest = 0,
 		.n_cipher_suites = 8,
@@ -309,6 +314,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.hw_ops = &qca99x0_ops,
 		.decap_align_bytes = 1,
 		.spectral_bin_discard = 4,
+		.spectral_bin_offset = 0,
 		.vht160_mcs_rx_highest = 0,
 		.vht160_mcs_tx_highest = 0,
 		.n_cipher_suites = 11,
@@ -347,6 +353,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.hw_ops = &qca99x0_ops,
 		.decap_align_bytes = 1,
 		.spectral_bin_discard = 12,
+		.spectral_bin_offset = 8,
 
 		/* Can do only 2x2 VHT160 or 80+80. 1560Mbps is 4x4 80Mhz
 		 * or 2x2 160Mhz, long-guard-interval.
@@ -388,6 +395,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.hw_ops = &qca99x0_ops,
 		.decap_align_bytes = 1,
 		.spectral_bin_discard = 12,
+		.spectral_bin_offset = 8,
 
 		/* Can do only 1x1 VHT160 or 80+80. 780Mbps is 2x2 80Mhz or
 		 * 1x1 160Mhz, long-guard-interval.
@@ -423,6 +431,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.hw_ops = &qca988x_ops,
 		.decap_align_bytes = 4,
 		.spectral_bin_discard = 0,
+		.spectral_bin_offset = 0,
 		.vht160_mcs_rx_highest = 0,
 		.vht160_mcs_tx_highest = 0,
 		.n_cipher_suites = 8,
@@ -456,6 +465,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.target_cpu_freq = 176000000,
 		.decap_align_bytes = 4,
 		.spectral_bin_discard = 0,
+		.spectral_bin_offset = 0,
 		.vht160_mcs_rx_highest = 0,
 		.vht160_mcs_tx_highest = 0,
 		.n_cipher_suites = 8,
@@ -494,6 +504,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.hw_ops = &qca99x0_ops,
 		.decap_align_bytes = 1,
 		.spectral_bin_discard = 4,
+		.spectral_bin_offset = 0,
 		.vht160_mcs_rx_highest = 0,
 		.vht160_mcs_tx_highest = 0,
 		.n_cipher_suites = 11,

drivers/net/wireless/ath/ath10k/core.h

@@ -48,7 +48,8 @@
 #define WMI_READY_TIMEOUT (5 * HZ)
 #define ATH10K_FLUSH_TIMEOUT_HZ (5 * HZ)
 #define ATH10K_CONNECTION_LOSS_HZ (3 * HZ)
-#define ATH10K_NUM_CHANS 40
+#define ATH10K_NUM_CHANS 41
+#define ATH10K_MAX_5G_CHAN 173
 
 /* Antenna noise floor */
 #define ATH10K_DEFAULT_NOISE_FLOOR -95

drivers/net/wireless/ath/ath10k/debug.c

@@ -1727,7 +1727,9 @@ int ath10k_debug_start(struct ath10k *ar)
 			ath10k_warn(ar, "failed to disable pktlog: %d\n", ret);
 	}
 
-	if (ar->debug.nf_cal_period) {
+	if (ar->debug.nf_cal_period &&
+	    !test_bit(ATH10K_FW_FEATURE_NON_BMI,
+		      ar->normal_mode_fw.fw_file.fw_features)) {
 		ret = ath10k_wmi_pdev_set_param(ar,
 						ar->wmi.pdev_param->cal_period,
 						ar->debug.nf_cal_period);
@@ -1744,7 +1746,9 @@ void ath10k_debug_stop(struct ath10k *ar)
 {
 	lockdep_assert_held(&ar->conf_mutex);
 
-	ath10k_debug_cal_data_fetch(ar);
+	if (!test_bit(ATH10K_FW_FEATURE_NON_BMI,
+		      ar->normal_mode_fw.fw_file.fw_features))
+		ath10k_debug_cal_data_fetch(ar);
 
 	/* Must not use _sync to avoid deadlock, we do that in
 	 * ath10k_debug_destroy(). The check for htt_stats_mask is to avoid
@@ -2367,15 +2371,18 @@ int ath10k_debug_register(struct ath10k *ar)
 	debugfs_create_file("fw_dbglog", 0600, ar->debug.debugfs_phy, ar,
 			    &fops_fw_dbglog);
 
-	debugfs_create_file("cal_data", 0400, ar->debug.debugfs_phy, ar,
-			    &fops_cal_data);
+	if (!test_bit(ATH10K_FW_FEATURE_NON_BMI,
+		      ar->normal_mode_fw.fw_file.fw_features)) {
+		debugfs_create_file("cal_data", 0400, ar->debug.debugfs_phy, ar,
+				    &fops_cal_data);
+
+		debugfs_create_file("nf_cal_period", 0600, ar->debug.debugfs_phy, ar,
+				    &fops_nf_cal_period);
+	}
 
 	debugfs_create_file("ani_enable", 0600, ar->debug.debugfs_phy, ar,
 			    &fops_ani_enable);
 
-	debugfs_create_file("nf_cal_period", 0600, ar->debug.debugfs_phy, ar,
-			    &fops_nf_cal_period);
-
 	if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED)) {
 		debugfs_create_file("dfs_simulate_radar", 0200, ar->debug.debugfs_phy,
 				    ar, &fops_simulate_radar);

drivers/net/wireless/ath/ath10k/htt_tx.c

@@ -1202,7 +1202,7 @@ static int ath10k_htt_tx_32(struct ath10k_htt *htt,
 	case ATH10K_HW_TXRX_RAW:
 	case ATH10K_HW_TXRX_NATIVE_WIFI:
 		flags0 |= HTT_DATA_TX_DESC_FLAGS0_MAC_HDR_PRESENT;
-		/* pass through */
+		/* fall through */
 	case ATH10K_HW_TXRX_ETHERNET:
 		if (ar->hw_params.continuous_frag_desc) {
 			ext_desc_t = htt->frag_desc.vaddr_desc_32;
@@ -1404,7 +1404,7 @@ static int ath10k_htt_tx_64(struct ath10k_htt *htt,
 	case ATH10K_HW_TXRX_RAW:
 	case ATH10K_HW_TXRX_NATIVE_WIFI:
 		flags0 |= HTT_DATA_TX_DESC_FLAGS0_MAC_HDR_PRESENT;
-		/* pass through */
+		/* fall through */
 	case ATH10K_HW_TXRX_ETHERNET:
 		if (ar->hw_params.continuous_frag_desc) {
 			ext_desc_t = htt->frag_desc.vaddr_desc_64;

drivers/net/wireless/ath/ath10k/hw.h

@@ -586,6 +586,9 @@ struct ath10k_hw_params {
 
 	/* target supporting retention restore on ddr */
 	bool rri_on_ddr;
+
+	/* Number of bytes to be the offset for each FFT sample */
+	int spectral_bin_offset;
 };
 
 struct htt_rx_desc;

drivers/net/wireless/ath/ath10k/mac.c

@@ -7737,7 +7737,7 @@ static void ath10k_sta_statistics(struct ieee80211_hw *hw,
 		return;
 
 	sinfo->rx_duration = arsta->rx_duration;
-	sinfo->filled |= 1ULL << NL80211_STA_INFO_RX_DURATION;
+	sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_DURATION);
 
 	if (!arsta->txrate.legacy && !arsta->txrate.nss)
 		return;
@@ -7750,7 +7750,7 @@ static void ath10k_sta_statistics(struct ieee80211_hw *hw,
 		sinfo->txrate.bw = arsta->txrate.bw;
 	}
 	sinfo->txrate.flags = arsta->txrate.flags;
-	sinfo->filled |= 1ULL << NL80211_STA_INFO_TX_BITRATE;
+	sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE);
 }
 
 static const struct ieee80211_ops ath10k_ops = {
@@ -7870,6 +7870,9 @@ static const struct ieee80211_channel ath10k_5ghz_channels[] = {
 	CHAN5G(161, 5805, 0),
 	CHAN5G(165, 5825, 0),
 	CHAN5G(169, 5845, 0),
+	CHAN5G(173, 5865, 0),
+	/* If you add more, you may need to change ATH10K_MAX_5G_CHAN */
+	/* And you will definitely need to change ATH10K_NUM_CHANS in core.h */
 };
 
 struct ath10k *ath10k_mac_create(size_t priv_size)

drivers/net/wireless/ath/ath10k/pci.h

@@ -86,48 +86,6 @@ struct pcie_state {
 /* PCIE_CONFIG_FLAG definitions */
 #define PCIE_CONFIG_FLAG_ENABLE_L1  0x0000001
 
-/* Host software's Copy Engine configuration. */
-#define CE_ATTR_FLAGS 0
-
-/*
- * Configuration information for a Copy Engine pipe.
- * Passed from Host to Target during startup (one per CE).
- *
- * NOTE: Structure is shared between Host software and Target firmware!
- */
-struct ce_pipe_config {
-	__le32 pipenum;
-	__le32 pipedir;
-	__le32 nentries;
-	__le32 nbytes_max;
-	__le32 flags;
-	__le32 reserved;
-};
-
-/*
- * Directions for interconnect pipe configuration.
- * These definitions may be used during configuration and are shared
- * between Host and Target.
- *
- * Pipe Directions are relative to the Host, so PIPEDIR_IN means
- * "coming IN over air through Target to Host" as with a WiFi Rx operation.
- * Conversely, PIPEDIR_OUT means "going OUT from Host through Target over air"
- * as with a WiFi Tx operation. This is somewhat awkward for the "middle-man"
- * Target since things that are "PIPEDIR_OUT" are coming IN to the Target
- * over the interconnect.
- */
-#define PIPEDIR_NONE    0
-#define PIPEDIR_IN      1  /* Target-->Host, WiFi Rx direction */
-#define PIPEDIR_OUT     2  /* Host->Target, WiFi Tx direction */
-#define PIPEDIR_INOUT   3  /* bidirectional */
-
-/* Establish a mapping between a service/direction and a pipe. */
-struct service_to_pipe {
-	__le32 service_id;
-	__le32 pipedir;
-	__le32 pipenum;
-};
-
 /* Per-pipe state. */
 struct ath10k_pci_pipe {
 	/* Handle of underlying Copy Engine */