Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/…

…kernel/git/jdelvare/staging

Pull hwmon subsystem update from Jean Delvare:
 "There are many improvements to the it87 driver, as well as suspend
  support for the Winbond Super-I/O chips, and a few other fixes."

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon-vid: Add support for AMD family 11h to 15h processors
  hwmon: (it87) Support PECI for additional chips
  hwmon: (it87) Report thermal sensor type as Intel PECI if appropriate
  hwmon: (it87) Manage device specific features with table
  hwmon: (it87) Replace pwm group macro with direct attribute definitions
  hwmon: (it87) Avoid quoted string splits across lines
  hwmon: (it87) Save fan registers in 2-dimensional array
  hwmon: (it87) Introduce support for tempX_offset sysfs attribute
  hwmon: (it87) Replace macro defining tempX_type sensors with direct definitions
  hwmon: (it87) Save voltage register values in 2-dimensional array
  hwmon: (it87) Save temperature registers in 2-dimensional array
  hwmon: (w83627ehf) Get rid of smatch warnings
  hwmon: (w83627hf) Don't touch nonexistent I2C address registers
  hwmon: (w83627ehf) Add support for suspend
  hwmon: (w83627hf) Add support for suspend
  hwmon: Fix PCI device reference leak in quirk

Documentation/hwmon/it87

@@ -209,3 +209,13 @@ doesn't use CPU cycles.
 Trip points must be set properly before switching to automatic fan speed
 control mode. The driver will perform basic integrity checks before
 actually switching to automatic control mode.
+
+
+Temperature offset attributes
+-----------------------------
+
+The driver supports temp[1-3]_offset sysfs attributes to adjust the reported
+temperature for thermal diodes or diode-connected thermal transistors.
+If a temperature sensor is configured for thermistors, the attribute values
+are ignored. If the thermal sensor type is Intel PECI, the temperature offset
+must be programmed to the critical CPU temperature.

drivers/hwmon/hwmon-vid.c

@@ -115,6 +115,12 @@ int vid_from_reg(int val, u8 vrm)
 		return (val < 32) ? 1550 - 25 * val
 			: 775 - (25 * (val - 31)) / 2;
 
+	case 26:		/* AMD family 10h to 15h, serial VID */
+		val &= 0x7f;
+		if (val >= 0x7c)
+			return 0;
+		return DIV_ROUND_CLOSEST(15500 - 125 * val, 10);
+
 	case 91:		/* VRM 9.1 */
 	case 90:		/* VRM 9.0 */
 		val &= 0x1f;
@@ -195,6 +201,10 @@ static struct vrm_model vrm_models[] = {
 	{X86_VENDOR_AMD, 0xF, 0x40, 0x7F, ANY, 24},	/* NPT family 0Fh */
 	{X86_VENDOR_AMD, 0xF, 0x80, ANY, ANY, 25},	/* future fam. 0Fh */
 	{X86_VENDOR_AMD, 0x10, 0x0, ANY, ANY, 25},	/* NPT family 10h */
+	{X86_VENDOR_AMD, 0x11, 0x0, ANY, ANY, 26},	/* family 11h */
+	{X86_VENDOR_AMD, 0x12, 0x0, ANY, ANY, 26},	/* family 12h */
+	{X86_VENDOR_AMD, 0x14, 0x0, ANY, ANY, 26},	/* family 14h */
+	{X86_VENDOR_AMD, 0x15, 0x0, ANY, ANY, 26},	/* family 15h */
 
 	{X86_VENDOR_INTEL, 0x6, 0x0, 0x6, ANY, 82},	/* Pentium Pro,
 							 * Pentium II, Xeon,

drivers/hwmon/hwmon.c

@@ -84,19 +84,21 @@ static void __init hwmon_pci_quirks(void)
 
 	/* Open access to 0x295-0x296 on MSI MS-7031 */
 	sb = pci_get_device(PCI_VENDOR_ID_ATI, 0x436c, NULL);
-	if (sb &&
-	    (sb->subsystem_vendor == 0x1462 &&	/* MSI */
-	     sb->subsystem_device == 0x0031)) {	/* MS-7031 */
-
-		pci_read_config_byte(sb, 0x48, &enable);
-		pci_read_config_word(sb, 0x64, &base);
-
-		if (base == 0 && !(enable & BIT(2))) {
-			dev_info(&sb->dev,
-				 "Opening wide generic port at 0x295\n");
-			pci_write_config_word(sb, 0x64, 0x295);
-			pci_write_config_byte(sb, 0x48, enable | BIT(2));
+	if (sb) {
+		if (sb->subsystem_vendor == 0x1462 &&	/* MSI */
+		    sb->subsystem_device == 0x0031) {	/* MS-7031 */
+			pci_read_config_byte(sb, 0x48, &enable);
+			pci_read_config_word(sb, 0x64, &base);
+
+			if (base == 0 && !(enable & BIT(2))) {
+				dev_info(&sb->dev,
+					 "Opening wide generic port at 0x295\n");
+				pci_write_config_word(sb, 0x64, 0x295);
+				pci_write_config_byte(sb, 0x48,
+						      enable | BIT(2));
+			}
 		}
+		pci_dev_put(sb);
 	}
 #endif
 }