[DRIVER][RUNTIME] Make runtime fully device agnostic (apache#23)

include/vta/driver.h

@@ -1,7 +1,9 @@
 /*!
  *  Copyright (c) 2018 by Contributors
  * \file vta_driver.h
- * \brief General driver interface.
+ * \brief Driver interface that is used by runtime.
+ *
+ * Driver's implementation is device specific.
  */
 
 #ifndef VTA_DRIVER_H_
@@ -11,16 +13,50 @@
 extern "C" {
 #endif
 
-#include <stdlib.h>
 #include <stdint.h>
+#include <stdlib.h>
 
-/*! \brief Memory management constants */
+/*! \brief Memory management constants for cached memory */
 #define VTA_CACHED 1
-/*! \brief Memory management constants */
+/*! \brief Memory management constants for non-cached memory */
 #define VTA_NOT_CACHED 0
 
-/*! \brief VTA command handle */
-typedef void * VTAHandle;
+/*! \brief Physically contiguous buffer size limit */
+#ifndef VTA_MAX_XFER
+#define VTA_MAX_XFER (1<<22)
+#endif
+
+/*! \brief Device resource context  */
+typedef void * VTADeviceHandle;
+
+/*! \brief physical address */
+typedef uint32_t vta_phy_addr_t;
+
+/*!
+ * \brief Allocate a device resource handle
+ * \return The device handle.
+ */
+VTADeviceHandle VTADeviceAlloc();
+
+/*!
+ * \brief Free a device handle
+ * \param handle The device handle to be freed.
+ */
+void VTADeviceFree(VTADeviceHandle handle);
+
+/*!
+ * \brief Launch the instructions block until done.
+ * \param The device handle.
+ * \param insn_phy_addr The physical address of instruction stream.
+ * \param insn_count Instruction count.
+ * \param wait_cycles The maximum of cycles to wait
+ *
+ * \return 0 if running is successful, 1 if timeout.
+ */
+int VTADeviceRun(VTADeviceHandle device,
+                 vta_phy_addr_t insn_phy_addr,
+                 uint32_t insn_count,
+                 uint32_t wait_cycles);
 
 /*!
  * \brief Allocates physically contiguous region in memory (limited by MAX_XFER).
@@ -41,52 +77,23 @@ void VTAMemFree(void* buf);
  * \param buf Pointer to memory region allocated with VTAMemAlloc.
  * \return The physical address of the memory region.
  */
-uint32_t VTAGetMemPhysAddr(void* buf);
+vta_phy_addr_t VTAGetMemPhysAddr(void* buf);
 
 /*!
  * \brief Flushes the region of memory out of the CPU cache to DRAM.
  * \param buf Pointer to memory region allocated with VTAMemAlloc to be flushed.
+ *            This need to be the physical address.
  * \param size Size of the region to flush in Bytes.
  */
-void VTAFlushCache(void* buf, int size);
+void VTAFlushCache(vta_phy_addr_t buf, int size);
 
 /*!
  * \brief Invalidates the region of memory that is cached.
  * \param buf Pointer to memory region allocated with VTAMemAlloc to be invalidated.
+ *            This need to be the physical address.
  * \param size Size of the region to invalidate in Bytes.
  */
-void VTAInvalidateCache(void* buf, int size);
-
-/*!
- * \brief Returns a memory map to FPGA configuration registers.
- * \param addr The base physical address of the configuration registers.
- * \param length The size of the memory mapped region in bytes.
- * \return A pointer to the memory mapped region.
- */
-void *VTAMapRegister(unsigned addr, size_t length);
-
-/*!
- * \brief Deletes the configuration register memory map.
- * \param vta The memory mapped region.
- * \param length The size of the memory mapped region in bytes.
- */
-void VTAUnmapRegister(void *vta, size_t length);
-
-/*!
- * \brief Writes to a memory mapped configuration register.
- * \param vta_base The handle to the memory mapped configuration registers.
- * \param offset The offset of the register to write to.
- * \param val The value to be written to the memory mapped register.
- */
-void VTAWriteMappedReg(VTAHandle vta_base, unsigned offset, unsigned val);
-
-/*!
- * \brief Reads from the memory mapped configuration register.
- * \param vta_base The handle to the memory mapped configuration registers.
- * \param offset The offset of the register to read from.
- * \return The value read from the memory mapped register.
- */
-unsigned VTAReadMappedReg(VTAHandle vta_base, unsigned offset);
+void VTAInvalidateCache(vta_phy_addr_t buf, int size);
 
 /*!
  * \brief Programming the bit stream on the FPGA.

src/data_buffer.h

@@ -35,7 +35,7 @@ struct DataBuffer {
    */
   void InvalidateCache(size_t offset, size_t size) {
     if (!kBufferCoherent) {
-      VTAInvalidateCache(reinterpret_cast<void*>(phy_addr_ + offset), size);
+      VTAInvalidateCache(phy_addr_ + offset, size);
     }
   }
   /*!
@@ -45,7 +45,7 @@ struct DataBuffer {
    */
   void FlushCache(size_t offset, size_t size) {
     if (!kBufferCoherent) {
-      VTAFlushCache(reinterpret_cast<void*>(phy_addr_ + offset), size);
+      VTAFlushCache(phy_addr_ + offset, size);
     }
   }
   /*!

src/pynq/pynq_driver.cc

@@ -5,6 +5,7 @@
  */
 
 #include <vta/driver.h>
+#include <thread>
 #include "./pynq_driver.h"
 
 
@@ -16,16 +17,16 @@ void VTAMemFree(void* buf) {
   cma_free(buf);
 }
 
-uint32_t VTAGetMemPhysAddr(void* buf) {
+vta_phy_addr_t VTAGetMemPhysAddr(void* buf) {
   return cma_get_phy_addr(buf);
 }
 
-void VTAFlushCache(void* buf, int size) {
-  xlnkFlushCache(buf, size);
+void VTAFlushCache(vta_phy_addr_t buf, int size) {
+  xlnkFlushCache(reinterpret_cast<void*>(buf), size);
 }
 
-void VTAInvalidateCache(void* buf, int size) {
-  xlnkInvalidateCache(buf, size);
+void VTAInvalidateCache(vta_phy_addr_t buf, int size) {
+  xlnkInvalidateCache(reinterpret_cast<void*>(buf), size);
 }
 
 void *VTAMapRegister(uint32_t addr, size_t length) {
@@ -57,33 +58,112 @@ uint32_t VTAReadMappedReg(void* base_addr, uint32_t offset) {
   return *((volatile uint32_t *) (reinterpret_cast<char *>(base_addr) + offset));
 }
 
+class VTADevice {
+ public:
+  VTADevice() {
+    // VTA stage handles
+    vta_fetch_handle_ = VTAMapRegister(VTA_FETCH_ADDR, VTA_RANGE);
+    vta_load_handle_ = VTAMapRegister(VTA_LOAD_ADDR, VTA_RANGE);
+    vta_compute_handle_ = VTAMapRegister(VTA_COMPUTE_ADDR, VTA_RANGE);
+    vta_store_handle_ = VTAMapRegister(VTA_STORE_ADDR, VTA_RANGE);
+  }
+
+  ~VTADevice() {
+    // Close VTA stage handle
+    VTAUnmapRegister(vta_fetch_handle_, VTA_RANGE);
+    VTAUnmapRegister(vta_load_handle_, VTA_RANGE);
+    VTAUnmapRegister(vta_compute_handle_, VTA_RANGE);
+    VTAUnmapRegister(vta_store_handle_, VTA_RANGE);
+  }
+
+  int Run(vta_phy_addr_t insn_phy_addr,
+          uint32_t insn_count,
+          uint32_t wait_cycles) {
+    // NOTE: Register address map is derived from the auto-generated
+    // driver files available under hardware/build/vivado/<design>/export/driver
+    // FETCH @ 0x10 : Data signal of insn_count_V
+    VTAWriteMappedReg(vta_fetch_handle_, 0x10, insn_count);
+    // FETCH @ 0x18 : Data signal of insns_V
+    VTAWriteMappedReg(vta_fetch_handle_, 0x18, insn_phy_addr);
+    // LOAD @ 0x10 : Data signal of inputs_V
+    VTAWriteMappedReg(vta_load_handle_, 0x10, 0);
+    // LOAD @ 0x18 : Data signal of weight_V
+    VTAWriteMappedReg(vta_load_handle_, 0x18, 0);
+    // COMPUTE @ 0x20 : Data signal of uops_V
+    VTAWriteMappedReg(vta_compute_handle_, 0x20, 0);
+    // COMPUTE @ 0x28 : Data signal of biases_V
+    VTAWriteMappedReg(vta_compute_handle_, 0x28, 0);
+    // STORE @ 0x10 : Data signal of outputs_V
+    VTAWriteMappedReg(vta_store_handle_, 0x10, 0);
+
+    // VTA start
+    VTAWriteMappedReg(vta_fetch_handle_, 0x0, VTA_START);
+    VTAWriteMappedReg(vta_load_handle_, 0x0, VTA_AUTORESTART);
+    VTAWriteMappedReg(vta_compute_handle_, 0x0, VTA_AUTORESTART);
+    VTAWriteMappedReg(vta_store_handle_, 0x0, VTA_AUTORESTART);
+
+    // Loop until the VTA is done
+    unsigned t, flag = 0;
+    for (t = 0; t < wait_cycles; ++t) {
+      flag = VTAReadMappedReg(vta_compute_handle_, 0x18);
+      if (flag == VTA_DONE) break;
+      std::this_thread::yield();
+    }
+    // Report error if timeout
+    return t < wait_cycles ? 0 : 1;
+  }
+
+ private:
+  // VTA handles (register maps)
+  void* vta_fetch_handle_{nullptr};
+  void* vta_load_handle_{nullptr};
+  void* vta_compute_handle_{nullptr};
+  void* vta_store_handle_{nullptr};
+};
+
+VTADeviceHandle VTADeviceAlloc() {
+  return new VTADevice();
+}
+
+void VTADeviceFree(VTADeviceHandle handle) {
+  delete static_cast<VTADevice*>(handle);
+}
+
+int VTADeviceRun(VTADeviceHandle handle,
+                 vta_phy_addr_t insn_phy_addr,
+                 uint32_t insn_count,
+                 uint32_t wait_cycles) {
+  return static_cast<VTADevice*>(handle)->Run(
+      insn_phy_addr, insn_count, wait_cycles);
+}
+
 void VTAProgram(const char* bitstream) {
-    int elem;
-    FILE *src, *dst, *partial;
-    partial = fopen(VTA_PYNQ_BS_IS_PARTIAL, "w");
-    if (partial == NULL) {
-        printf("Cannot open partial config file %s\n", VTA_PYNQ_BS_IS_PARTIAL);
+  int elem;
+  FILE *src, *dst, *partial;
+  partial = fopen(VTA_PYNQ_BS_IS_PARTIAL, "w");
+  if (partial == NULL) {
+    printf("Cannot open partial config file %s\n", VTA_PYNQ_BS_IS_PARTIAL);
         fclose(partial);
         exit(1);
-    }
-    fputc('0', partial);
-    fclose(partial);
-    src = fopen(bitstream, "rb");
-    if (src == NULL) {
-        printf("Cannot open bitstream %s\n", bitstream);
-        exit(1);
-    }
-    dst = fopen(VTA_PYNQ_BS_XDEVCFG, "wb");
-    if (dst == NULL) {
-        printf("Cannot open device file %s\n", VTA_PYNQ_BS_XDEVCFG);
-        fclose(dst);
-        exit(1);
-    }
-    elem = fgetc(src);
-    while (elem != EOF) {
-        fputc(elem, dst);
-        elem = fgetc(src);
-    }
-    fclose(src);
+  }
+  fputc('0', partial);
+  fclose(partial);
+  src = fopen(bitstream, "rb");
+  if (src == NULL) {
+    printf("Cannot open bitstream %s\n", bitstream);
+    exit(1);
+  }
+  dst = fopen(VTA_PYNQ_BS_XDEVCFG, "wb");
+  if (dst == NULL) {
+    printf("Cannot open device file %s\n", VTA_PYNQ_BS_XDEVCFG);
     fclose(dst);
+    exit(1);
+  }
+  elem = fgetc(src);
+  while (elem != EOF) {
+    fputc(elem, dst);
+    elem = fgetc(src);
+  }
+  fclose(src);
+  fclose(dst);
 }

src/pynq/pynq_driver.h

@@ -32,6 +32,11 @@ void xlnkFlushCache(void* buf, int size);
 void xlnkInvalidateCache(void* buf, int size);
 #endif
 
+void *VTAMapRegister(uint32_t addr, size_t length);
+void VTAUnmapRegister(void *vta, size_t length);
+void VTAWriteMappedReg(void* base_addr, uint32_t offset, uint32_t val);
+uint32_t VTAReadMappedReg(void* base_addr, uint32_t offset);
+
 /*! \brief (Pynq only) Partial bitstream status file path */
 #define VTA_PYNQ_BS_IS_PARTIAL "/sys/devices/soc0/amba/f8007000.devcfg/is_partial_bitstream"
 /*! \brief (Pynq only) Bitstream destination file path */
@@ -44,9 +49,6 @@ void xlnkInvalidateCache(void* buf, int size);
 /*! \brief (Pynq only) MMIO driver constant */
 #define VTA_PYNQ_MMIO_WORD_MASK (~(MMIO_WORD_LENGTH - 1))
 
-/*! \brief Physically contiguous buffer size limit */
-#define VTA_MAX_XFER (1<<22)
-
 /*! \brief VTA configuration register address range */
 #define VTA_RANGE 0x100
 /*! \brief VTA configuration register start value */