Merge pull request #1 from torvalds/master #211

danysan2000 · 2015-10-22T03:00:25Z

actualizo-1

We can end up allocating a new compression stream with GFP_KERNEL from within the IO path, which may result is nested (recursive) IO operations. That can introduce problems if the IO path in question is a reclaimer, holding some locks that will deadlock nested IOs. Allocate streams and working memory using GFP_NOIO flag, forbidding recursive IO and FS operations. An example: [ 747.233722] inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage. [ 747.233724] git/20158 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 747.233725] (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555 [ 747.233733] {IN-RECLAIM_FS-W} state was registered at: [ 747.233735] [<ffffffff8107b8e9>] __lock_acquire+0x8da/0x117b [ 747.233738] [<ffffffff8107c950>] lock_acquire+0x10c/0x1a7 [ 747.233740] [<ffffffff811e323e>] start_this_handle+0x52d/0x555 [ 747.233742] [<ffffffff811e331a>] jbd2__journal_start+0xb4/0x237 [ 747.233744] [<ffffffff811cc6c7>] __ext4_journal_start_sb+0x108/0x17e [ 747.233748] [<ffffffff811a90bf>] ext4_dirty_inode+0x32/0x61 [ 747.233750] [<ffffffff8115f37e>] __mark_inode_dirty+0x16b/0x60c [ 747.233754] [<ffffffff81150ad6>] iput+0x11e/0x274 [ 747.233757] [<ffffffff8114bfbd>] __dentry_kill+0x148/0x1b8 [ 747.233759] [<ffffffff8114c9d9>] shrink_dentry_list+0x274/0x44a [ 747.233761] [<ffffffff8114d38a>] prune_dcache_sb+0x4a/0x55 [ 747.233763] [<ffffffff8113b1ad>] super_cache_scan+0xfc/0x176 [ 747.233767] [<ffffffff810fa089>] shrink_slab.part.14.constprop.25+0x2a2/0x4d3 [ 747.233770] [<ffffffff810fcccb>] shrink_zone+0x74/0x140 [ 747.233772] [<ffffffff810fd924>] kswapd+0x6b7/0x930 [ 747.233774] [<ffffffff81058887>] kthread+0x107/0x10f [ 747.233778] [<ffffffff814fadff>] ret_from_fork+0x3f/0x70 [ 747.233783] irq event stamp: 138297 [ 747.233784] hardirqs last enabled at (138297): [<ffffffff8107aff3>] debug_check_no_locks_freed+0x113/0x12f [ 747.233786] hardirqs last disabled at (138296): [<ffffffff8107af13>] debug_check_no_locks_freed+0x33/0x12f [ 747.233788] softirqs last enabled at (137818): [<ffffffff81040f89>] __do_softirq+0x2d3/0x3e9 [ 747.233792] softirqs last disabled at (137813): [<ffffffff81041292>] irq_exit+0x41/0x95 [ 747.233794] other info that might help us debug this: [ 747.233796] Possible unsafe locking scenario: [ 747.233797] CPU0 [ 747.233798] ---- [ 747.233799] lock(jbd2_handle); [ 747.233801] <Interrupt> [ 747.233801] lock(jbd2_handle); [ 747.233803] *** DEADLOCK *** [ 747.233805] 5 locks held by git/20158: [ 747.233806] #0: (sb_writers#7){.+.+.+}, at: [<ffffffff81155411>] mnt_want_write+0x24/0x4b [ 747.233811] #1: (&type->i_mutex_dir_key#2/1){+.+.+.}, at: [<ffffffff81145087>] lock_rename+0xd9/0xe3 [ 747.233817] #2: (&sb->s_type->i_mutex_key#11){+.+.+.}, at: [<ffffffff8114f8e2>] lock_two_nondirectories+0x3f/0x6b [ 747.233822] #3: (&sb->s_type->i_mutex_key#11/4){+.+.+.}, at: [<ffffffff8114f909>] lock_two_nondirectories+0x66/0x6b [ 747.233827] #4: (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555 [ 747.233831] stack backtrace: [ 747.233834] CPU: 2 PID: 20158 Comm: git Not tainted 4.1.0-rc7-next-20150615-dbg-00016-g8bdf555-dirty torvalds#211 [ 747.233837] ffff8800a56cea40 ffff88010d0a75f8 ffffffff814f446d ffffffff81077036 [ 747.233840] ffffffff823a84b0 ffff88010d0a7638 ffffffff814f3849 0000000000000001 [ 747.233843] 000000000000000a ffff8800a56cf6f8 ffff8800a56cea40 ffffffff810795dd [ 747.233846] Call Trace: [ 747.233849] [<ffffffff814f446d>] dump_stack+0x4c/0x6e [ 747.233852] [<ffffffff81077036>] ? up+0x39/0x3e [ 747.233854] [<ffffffff814f3849>] print_usage_bug.part.23+0x25b/0x26a [ 747.233857] [<ffffffff810795dd>] ? print_shortest_lock_dependencies+0x182/0x182 [ 747.233859] [<ffffffff8107a9c9>] mark_lock+0x384/0x56d [ 747.233862] [<ffffffff8107ac11>] mark_held_locks+0x5f/0x76 [ 747.233865] [<ffffffffa023d2f3>] ? zcomp_strm_alloc+0x25/0x73 [zram] [ 747.233867] [<ffffffff8107d13b>] lockdep_trace_alloc+0xb2/0xb5 [ 747.233870] [<ffffffff8112bac7>] kmem_cache_alloc_trace+0x32/0x1e2 [ 747.233873] [<ffffffffa023d2f3>] zcomp_strm_alloc+0x25/0x73 [zram] [ 747.233876] [<ffffffffa023d428>] zcomp_strm_multi_find+0xe7/0x173 [zram] [ 747.233879] [<ffffffffa023d58b>] zcomp_strm_find+0xc/0xe [zram] [ 747.233881] [<ffffffffa023f292>] zram_bvec_rw+0x2ca/0x7e0 [zram] [ 747.233885] [<ffffffffa023fa8c>] zram_make_request+0x1fa/0x301 [zram] [ 747.233889] [<ffffffff812142f8>] generic_make_request+0x9c/0xdb [ 747.233891] [<ffffffff8121442e>] submit_bio+0xf7/0x120 [ 747.233895] [<ffffffff810f1c0c>] ? __test_set_page_writeback+0x1a0/0x1b8 [ 747.233897] [<ffffffff811a9d00>] ext4_io_submit+0x2e/0x43 [ 747.233899] [<ffffffff811a9efa>] ext4_bio_write_page+0x1b7/0x300 [ 747.233902] [<ffffffff811a2106>] mpage_submit_page+0x60/0x77 [ 747.233905] [<ffffffff811a25b0>] mpage_map_and_submit_buffers+0x10f/0x21d [ 747.233907] [<ffffffff811a6814>] ext4_writepages+0xc8c/0xe1b [ 747.233910] [<ffffffff810f3f77>] do_writepages+0x23/0x2c [ 747.233913] [<ffffffff810ea5d1>] __filemap_fdatawrite_range+0x84/0x8b [ 747.233915] [<ffffffff810ea657>] filemap_flush+0x1c/0x1e [ 747.233917] [<ffffffff811a3851>] ext4_alloc_da_blocks+0xb8/0x117 [ 747.233919] [<ffffffff811af52a>] ext4_rename+0x132/0x6dc [ 747.233921] [<ffffffff8107ac11>] ? mark_held_locks+0x5f/0x76 [ 747.233924] [<ffffffff811afafd>] ext4_rename2+0x29/0x2b [ 747.233926] [<ffffffff811427ea>] vfs_rename+0x540/0x636 [ 747.233928] [<ffffffff81146a01>] SyS_renameat2+0x359/0x44d [ 747.233931] [<ffffffff81146b26>] SyS_rename+0x1e/0x20 [ 747.233933] [<ffffffff814faa17>] entry_SYSCALL_64_fastpath+0x12/0x6f [minchan: add stable mark] Cc: stable@vger.kernel.org Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>

We can end up allocating a new compression stream with GFP_KERNEL from within the IO path, which may result is nested (recursive) IO operations. That can introduce problems if the IO path in question is a reclaimer, holding some locks that will deadlock nested IOs. Allocate streams and working memory using GFP_NOIO flag, forbidding recursive IO and FS operations. An example: [ 747.233722] inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage. [ 747.233724] git/20158 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 747.233725] (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555 [ 747.233733] {IN-RECLAIM_FS-W} state was registered at: [ 747.233735] [<ffffffff8107b8e9>] __lock_acquire+0x8da/0x117b [ 747.233738] [<ffffffff8107c950>] lock_acquire+0x10c/0x1a7 [ 747.233740] [<ffffffff811e323e>] start_this_handle+0x52d/0x555 [ 747.233742] [<ffffffff811e331a>] jbd2__journal_start+0xb4/0x237 [ 747.233744] [<ffffffff811cc6c7>] __ext4_journal_start_sb+0x108/0x17e [ 747.233748] [<ffffffff811a90bf>] ext4_dirty_inode+0x32/0x61 [ 747.233750] [<ffffffff8115f37e>] __mark_inode_dirty+0x16b/0x60c [ 747.233754] [<ffffffff81150ad6>] iput+0x11e/0x274 [ 747.233757] [<ffffffff8114bfbd>] __dentry_kill+0x148/0x1b8 [ 747.233759] [<ffffffff8114c9d9>] shrink_dentry_list+0x274/0x44a [ 747.233761] [<ffffffff8114d38a>] prune_dcache_sb+0x4a/0x55 [ 747.233763] [<ffffffff8113b1ad>] super_cache_scan+0xfc/0x176 [ 747.233767] [<ffffffff810fa089>] shrink_slab.part.14.constprop.25+0x2a2/0x4d3 [ 747.233770] [<ffffffff810fcccb>] shrink_zone+0x74/0x140 [ 747.233772] [<ffffffff810fd924>] kswapd+0x6b7/0x930 [ 747.233774] [<ffffffff81058887>] kthread+0x107/0x10f [ 747.233778] [<ffffffff814fadff>] ret_from_fork+0x3f/0x70 [ 747.233783] irq event stamp: 138297 [ 747.233784] hardirqs last enabled at (138297): [<ffffffff8107aff3>] debug_check_no_locks_freed+0x113/0x12f [ 747.233786] hardirqs last disabled at (138296): [<ffffffff8107af13>] debug_check_no_locks_freed+0x33/0x12f [ 747.233788] softirqs last enabled at (137818): [<ffffffff81040f89>] __do_softirq+0x2d3/0x3e9 [ 747.233792] softirqs last disabled at (137813): [<ffffffff81041292>] irq_exit+0x41/0x95 [ 747.233794] other info that might help us debug this: [ 747.233796] Possible unsafe locking scenario: [ 747.233797] CPU0 [ 747.233798] ---- [ 747.233799] lock(jbd2_handle); [ 747.233801] <Interrupt> [ 747.233801] lock(jbd2_handle); [ 747.233803] *** DEADLOCK *** [ 747.233805] 5 locks held by git/20158: [ 747.233806] #0: (sb_writers#7){.+.+.+}, at: [<ffffffff81155411>] mnt_want_write+0x24/0x4b [ 747.233811] #1: (&type->i_mutex_dir_key#2/1){+.+.+.}, at: [<ffffffff81145087>] lock_rename+0xd9/0xe3 [ 747.233817] #2: (&sb->s_type->i_mutex_key#11){+.+.+.}, at: [<ffffffff8114f8e2>] lock_two_nondirectories+0x3f/0x6b [ 747.233822] #3: (&sb->s_type->i_mutex_key#11/4){+.+.+.}, at: [<ffffffff8114f909>] lock_two_nondirectories+0x66/0x6b [ 747.233827] #4: (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555 [ 747.233831] stack backtrace: [ 747.233834] CPU: 2 PID: 20158 Comm: git Not tainted 4.1.0-rc7-next-20150615-dbg-00016-g8bdf555-dirty torvalds#211 [ 747.233837] ffff8800a56cea40 ffff88010d0a75f8 ffffffff814f446d ffffffff81077036 [ 747.233840] ffffffff823a84b0 ffff88010d0a7638 ffffffff814f3849 0000000000000001 [ 747.233843] 000000000000000a ffff8800a56cf6f8 ffff8800a56cea40 ffffffff810795dd [ 747.233846] Call Trace: [ 747.233849] [<ffffffff814f446d>] dump_stack+0x4c/0x6e [ 747.233852] [<ffffffff81077036>] ? up+0x39/0x3e [ 747.233854] [<ffffffff814f3849>] print_usage_bug.part.23+0x25b/0x26a [ 747.233857] [<ffffffff810795dd>] ? print_shortest_lock_dependencies+0x182/0x182 [ 747.233859] [<ffffffff8107a9c9>] mark_lock+0x384/0x56d [ 747.233862] [<ffffffff8107ac11>] mark_held_locks+0x5f/0x76 [ 747.233865] [<ffffffffa023d2f3>] ? zcomp_strm_alloc+0x25/0x73 [zram] [ 747.233867] [<ffffffff8107d13b>] lockdep_trace_alloc+0xb2/0xb5 [ 747.233870] [<ffffffff8112bac7>] kmem_cache_alloc_trace+0x32/0x1e2 [ 747.233873] [<ffffffffa023d2f3>] zcomp_strm_alloc+0x25/0x73 [zram] [ 747.233876] [<ffffffffa023d428>] zcomp_strm_multi_find+0xe7/0x173 [zram] [ 747.233879] [<ffffffffa023d58b>] zcomp_strm_find+0xc/0xe [zram] [ 747.233881] [<ffffffffa023f292>] zram_bvec_rw+0x2ca/0x7e0 [zram] [ 747.233885] [<ffffffffa023fa8c>] zram_make_request+0x1fa/0x301 [zram] [ 747.233889] [<ffffffff812142f8>] generic_make_request+0x9c/0xdb [ 747.233891] [<ffffffff8121442e>] submit_bio+0xf7/0x120 [ 747.233895] [<ffffffff810f1c0c>] ? __test_set_page_writeback+0x1a0/0x1b8 [ 747.233897] [<ffffffff811a9d00>] ext4_io_submit+0x2e/0x43 [ 747.233899] [<ffffffff811a9efa>] ext4_bio_write_page+0x1b7/0x300 [ 747.233902] [<ffffffff811a2106>] mpage_submit_page+0x60/0x77 [ 747.233905] [<ffffffff811a25b0>] mpage_map_and_submit_buffers+0x10f/0x21d [ 747.233907] [<ffffffff811a6814>] ext4_writepages+0xc8c/0xe1b [ 747.233910] [<ffffffff810f3f77>] do_writepages+0x23/0x2c [ 747.233913] [<ffffffff810ea5d1>] __filemap_fdatawrite_range+0x84/0x8b [ 747.233915] [<ffffffff810ea657>] filemap_flush+0x1c/0x1e [ 747.233917] [<ffffffff811a3851>] ext4_alloc_da_blocks+0xb8/0x117 [ 747.233919] [<ffffffff811af52a>] ext4_rename+0x132/0x6dc [ 747.233921] [<ffffffff8107ac11>] ? mark_held_locks+0x5f/0x76 [ 747.233924] [<ffffffff811afafd>] ext4_rename2+0x29/0x2b [ 747.233926] [<ffffffff811427ea>] vfs_rename+0x540/0x636 [ 747.233928] [<ffffffff81146a01>] SyS_renameat2+0x359/0x44d [ 747.233931] [<ffffffff81146b26>] SyS_rename+0x1e/0x20 [ 747.233933] [<ffffffff814faa17>] entry_SYSCALL_64_fastpath+0x12/0x6f [minchan@kernel.org: add stable mark] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Kyeongdon Kim <kyeongdon.kim@lge.com> Cc: <stable@vger.kernel.org>

We can end up allocating a new compression stream with GFP_KERNEL from within the IO path, which may result is nested (recursive) IO operations. That can introduce problems if the IO path in question is a reclaimer, holding some locks that will deadlock nested IOs. Allocate streams and working memory using GFP_NOIO flag, forbidding recursive IO and FS operations. An example: [ 747.233722] inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage. [ 747.233724] git/20158 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 747.233725] (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555 [ 747.233733] {IN-RECLAIM_FS-W} state was registered at: [ 747.233735] [<ffffffff8107b8e9>] __lock_acquire+0x8da/0x117b [ 747.233738] [<ffffffff8107c950>] lock_acquire+0x10c/0x1a7 [ 747.233740] [<ffffffff811e323e>] start_this_handle+0x52d/0x555 [ 747.233742] [<ffffffff811e331a>] jbd2__journal_start+0xb4/0x237 [ 747.233744] [<ffffffff811cc6c7>] __ext4_journal_start_sb+0x108/0x17e [ 747.233748] [<ffffffff811a90bf>] ext4_dirty_inode+0x32/0x61 [ 747.233750] [<ffffffff8115f37e>] __mark_inode_dirty+0x16b/0x60c [ 747.233754] [<ffffffff81150ad6>] iput+0x11e/0x274 [ 747.233757] [<ffffffff8114bfbd>] __dentry_kill+0x148/0x1b8 [ 747.233759] [<ffffffff8114c9d9>] shrink_dentry_list+0x274/0x44a [ 747.233761] [<ffffffff8114d38a>] prune_dcache_sb+0x4a/0x55 [ 747.233763] [<ffffffff8113b1ad>] super_cache_scan+0xfc/0x176 [ 747.233767] [<ffffffff810fa089>] shrink_slab.part.14.constprop.25+0x2a2/0x4d3 [ 747.233770] [<ffffffff810fcccb>] shrink_zone+0x74/0x140 [ 747.233772] [<ffffffff810fd924>] kswapd+0x6b7/0x930 [ 747.233774] [<ffffffff81058887>] kthread+0x107/0x10f [ 747.233778] [<ffffffff814fadff>] ret_from_fork+0x3f/0x70 [ 747.233783] irq event stamp: 138297 [ 747.233784] hardirqs last enabled at (138297): [<ffffffff8107aff3>] debug_check_no_locks_freed+0x113/0x12f [ 747.233786] hardirqs last disabled at (138296): [<ffffffff8107af13>] debug_check_no_locks_freed+0x33/0x12f [ 747.233788] softirqs last enabled at (137818): [<ffffffff81040f89>] __do_softirq+0x2d3/0x3e9 [ 747.233792] softirqs last disabled at (137813): [<ffffffff81041292>] irq_exit+0x41/0x95 [ 747.233794] other info that might help us debug this: [ 747.233796] Possible unsafe locking scenario: [ 747.233797] CPU0 [ 747.233798] ---- [ 747.233799] lock(jbd2_handle); [ 747.233801] <Interrupt> [ 747.233801] lock(jbd2_handle); [ 747.233803] *** DEADLOCK *** [ 747.233805] 5 locks held by git/20158: [ 747.233806] #0: (sb_writers#7){.+.+.+}, at: [<ffffffff81155411>] mnt_want_write+0x24/0x4b [ 747.233811] #1: (&type->i_mutex_dir_key#2/1){+.+.+.}, at: [<ffffffff81145087>] lock_rename+0xd9/0xe3 [ 747.233817] #2: (&sb->s_type->i_mutex_key#11){+.+.+.}, at: [<ffffffff8114f8e2>] lock_two_nondirectories+0x3f/0x6b [ 747.233822] #3: (&sb->s_type->i_mutex_key#11/4){+.+.+.}, at: [<ffffffff8114f909>] lock_two_nondirectories+0x66/0x6b [ 747.233827] #4: (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555 [ 747.233831] stack backtrace: [ 747.233834] CPU: 2 PID: 20158 Comm: git Not tainted 4.1.0-rc7-next-20150615-dbg-00016-g8bdf555-dirty torvalds#211 [ 747.233837] ffff8800a56cea40 ffff88010d0a75f8 ffffffff814f446d ffffffff81077036 [ 747.233840] ffffffff823a84b0 ffff88010d0a7638 ffffffff814f3849 0000000000000001 [ 747.233843] 000000000000000a ffff8800a56cf6f8 ffff8800a56cea40 ffffffff810795dd [ 747.233846] Call Trace: [ 747.233849] [<ffffffff814f446d>] dump_stack+0x4c/0x6e [ 747.233852] [<ffffffff81077036>] ? up+0x39/0x3e [ 747.233854] [<ffffffff814f3849>] print_usage_bug.part.23+0x25b/0x26a [ 747.233857] [<ffffffff810795dd>] ? print_shortest_lock_dependencies+0x182/0x182 [ 747.233859] [<ffffffff8107a9c9>] mark_lock+0x384/0x56d [ 747.233862] [<ffffffff8107ac11>] mark_held_locks+0x5f/0x76 [ 747.233865] [<ffffffffa023d2f3>] ? zcomp_strm_alloc+0x25/0x73 [zram] [ 747.233867] [<ffffffff8107d13b>] lockdep_trace_alloc+0xb2/0xb5 [ 747.233870] [<ffffffff8112bac7>] kmem_cache_alloc_trace+0x32/0x1e2 [ 747.233873] [<ffffffffa023d2f3>] zcomp_strm_alloc+0x25/0x73 [zram] [ 747.233876] [<ffffffffa023d428>] zcomp_strm_multi_find+0xe7/0x173 [zram] [ 747.233879] [<ffffffffa023d58b>] zcomp_strm_find+0xc/0xe [zram] [ 747.233881] [<ffffffffa023f292>] zram_bvec_rw+0x2ca/0x7e0 [zram] [ 747.233885] [<ffffffffa023fa8c>] zram_make_request+0x1fa/0x301 [zram] [ 747.233889] [<ffffffff812142f8>] generic_make_request+0x9c/0xdb [ 747.233891] [<ffffffff8121442e>] submit_bio+0xf7/0x120 [ 747.233895] [<ffffffff810f1c0c>] ? __test_set_page_writeback+0x1a0/0x1b8 [ 747.233897] [<ffffffff811a9d00>] ext4_io_submit+0x2e/0x43 [ 747.233899] [<ffffffff811a9efa>] ext4_bio_write_page+0x1b7/0x300 [ 747.233902] [<ffffffff811a2106>] mpage_submit_page+0x60/0x77 [ 747.233905] [<ffffffff811a25b0>] mpage_map_and_submit_buffers+0x10f/0x21d [ 747.233907] [<ffffffff811a6814>] ext4_writepages+0xc8c/0xe1b [ 747.233910] [<ffffffff810f3f77>] do_writepages+0x23/0x2c [ 747.233913] [<ffffffff810ea5d1>] __filemap_fdatawrite_range+0x84/0x8b [ 747.233915] [<ffffffff810ea657>] filemap_flush+0x1c/0x1e [ 747.233917] [<ffffffff811a3851>] ext4_alloc_da_blocks+0xb8/0x117 [ 747.233919] [<ffffffff811af52a>] ext4_rename+0x132/0x6dc [ 747.233921] [<ffffffff8107ac11>] ? mark_held_locks+0x5f/0x76 [ 747.233924] [<ffffffff811afafd>] ext4_rename2+0x29/0x2b [ 747.233926] [<ffffffff811427ea>] vfs_rename+0x540/0x636 [ 747.233928] [<ffffffff81146a01>] SyS_renameat2+0x359/0x44d [ 747.233931] [<ffffffff81146b26>] SyS_rename+0x1e/0x20 [ 747.233933] [<ffffffff814faa17>] entry_SYSCALL_64_fastpath+0x12/0x6f [minchan@kernel.org: add stable mark] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Kyeongdon Kim <kyeongdon.kim@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

We can end up allocating a new compression stream with GFP_KERNEL from within the IO path, which may result is nested (recursive) IO operations. That can introduce problems if the IO path in question is a reclaimer, holding some locks that will deadlock nested IOs. Allocate streams and working memory using GFP_NOIO flag, forbidding recursive IO and FS operations. An example: inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage. git/20158 [HC0[0]:SC0[0]:HE1:SE1] takes: (jbd2_handle){+.+.?.}, at: start_this_handle+0x4ca/0x555 {IN-RECLAIM_FS-W} state was registered at: __lock_acquire+0x8da/0x117b lock_acquire+0x10c/0x1a7 start_this_handle+0x52d/0x555 jbd2__journal_start+0xb4/0x237 __ext4_journal_start_sb+0x108/0x17e ext4_dirty_inode+0x32/0x61 __mark_inode_dirty+0x16b/0x60c iput+0x11e/0x274 __dentry_kill+0x148/0x1b8 shrink_dentry_list+0x274/0x44a prune_dcache_sb+0x4a/0x55 super_cache_scan+0xfc/0x176 shrink_slab.part.14.constprop.25+0x2a2/0x4d3 shrink_zone+0x74/0x140 kswapd+0x6b7/0x930 kthread+0x107/0x10f ret_from_fork+0x3f/0x70 irq event stamp: 138297 hardirqs last enabled at (138297): debug_check_no_locks_freed+0x113/0x12f hardirqs last disabled at (138296): debug_check_no_locks_freed+0x33/0x12f softirqs last enabled at (137818): __do_softirq+0x2d3/0x3e9 softirqs last disabled at (137813): irq_exit+0x41/0x95 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(jbd2_handle); <Interrupt> lock(jbd2_handle); *** DEADLOCK *** 5 locks held by git/20158: #0: (sb_writers#7){.+.+.+}, at: [<ffffffff81155411>] mnt_want_write+0x24/0x4b #1: (&type->i_mutex_dir_key#2/1){+.+.+.}, at: [<ffffffff81145087>] lock_rename+0xd9/0xe3 #2: (&sb->s_type->i_mutex_key#11){+.+.+.}, at: [<ffffffff8114f8e2>] lock_two_nondirectories+0x3f/0x6b #3: (&sb->s_type->i_mutex_key#11/4){+.+.+.}, at: [<ffffffff8114f909>] lock_two_nondirectories+0x66/0x6b #4: (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555 stack backtrace: CPU: 2 PID: 20158 Comm: git Not tainted 4.1.0-rc7-next-20150615-dbg-00016-g8bdf555-dirty #211 Call Trace: dump_stack+0x4c/0x6e mark_lock+0x384/0x56d mark_held_locks+0x5f/0x76 lockdep_trace_alloc+0xb2/0xb5 kmem_cache_alloc_trace+0x32/0x1e2 zcomp_strm_alloc+0x25/0x73 [zram] zcomp_strm_multi_find+0xe7/0x173 [zram] zcomp_strm_find+0xc/0xe [zram] zram_bvec_rw+0x2ca/0x7e0 [zram] zram_make_request+0x1fa/0x301 [zram] generic_make_request+0x9c/0xdb submit_bio+0xf7/0x120 ext4_io_submit+0x2e/0x43 ext4_bio_write_page+0x1b7/0x300 mpage_submit_page+0x60/0x77 mpage_map_and_submit_buffers+0x10f/0x21d ext4_writepages+0xc8c/0xe1b do_writepages+0x23/0x2c __filemap_fdatawrite_range+0x84/0x8b filemap_flush+0x1c/0x1e ext4_alloc_da_blocks+0xb8/0x117 ext4_rename+0x132/0x6dc ? mark_held_locks+0x5f/0x76 ext4_rename2+0x29/0x2b vfs_rename+0x540/0x636 SyS_renameat2+0x359/0x44d SyS_rename+0x1e/0x20 entry_SYSCALL_64_fastpath+0x12/0x6f [minchan@kernel.org: add stable mark] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Kyeongdon Kim <kyeongdon.kim@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit 3d5fe03 ] We can end up allocating a new compression stream with GFP_KERNEL from within the IO path, which may result is nested (recursive) IO operations. That can introduce problems if the IO path in question is a reclaimer, holding some locks that will deadlock nested IOs. Allocate streams and working memory using GFP_NOIO flag, forbidding recursive IO and FS operations. An example: inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage. git/20158 [HC0[0]:SC0[0]:HE1:SE1] takes: (jbd2_handle){+.+.?.}, at: start_this_handle+0x4ca/0x555 {IN-RECLAIM_FS-W} state was registered at: __lock_acquire+0x8da/0x117b lock_acquire+0x10c/0x1a7 start_this_handle+0x52d/0x555 jbd2__journal_start+0xb4/0x237 __ext4_journal_start_sb+0x108/0x17e ext4_dirty_inode+0x32/0x61 __mark_inode_dirty+0x16b/0x60c iput+0x11e/0x274 __dentry_kill+0x148/0x1b8 shrink_dentry_list+0x274/0x44a prune_dcache_sb+0x4a/0x55 super_cache_scan+0xfc/0x176 shrink_slab.part.14.constprop.25+0x2a2/0x4d3 shrink_zone+0x74/0x140 kswapd+0x6b7/0x930 kthread+0x107/0x10f ret_from_fork+0x3f/0x70 irq event stamp: 138297 hardirqs last enabled at (138297): debug_check_no_locks_freed+0x113/0x12f hardirqs last disabled at (138296): debug_check_no_locks_freed+0x33/0x12f softirqs last enabled at (137818): __do_softirq+0x2d3/0x3e9 softirqs last disabled at (137813): irq_exit+0x41/0x95 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(jbd2_handle); <Interrupt> lock(jbd2_handle); *** DEADLOCK *** 5 locks held by git/20158: #0: (sb_writers#7){.+.+.+}, at: [<ffffffff81155411>] mnt_want_write+0x24/0x4b #1: (&type->i_mutex_dir_key#2/1){+.+.+.}, at: [<ffffffff81145087>] lock_rename+0xd9/0xe3 #2: (&sb->s_type->i_mutex_key#11){+.+.+.}, at: [<ffffffff8114f8e2>] lock_two_nondirectories+0x3f/0x6b #3: (&sb->s_type->i_mutex_key#11/4){+.+.+.}, at: [<ffffffff8114f909>] lock_two_nondirectories+0x66/0x6b #4: (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555 stack backtrace: CPU: 2 PID: 20158 Comm: git Not tainted 4.1.0-rc7-next-20150615-dbg-00016-g8bdf555-dirty torvalds#211 Call Trace: dump_stack+0x4c/0x6e mark_lock+0x384/0x56d mark_held_locks+0x5f/0x76 lockdep_trace_alloc+0xb2/0xb5 kmem_cache_alloc_trace+0x32/0x1e2 zcomp_strm_alloc+0x25/0x73 [zram] zcomp_strm_multi_find+0xe7/0x173 [zram] zcomp_strm_find+0xc/0xe [zram] zram_bvec_rw+0x2ca/0x7e0 [zram] zram_make_request+0x1fa/0x301 [zram] generic_make_request+0x9c/0xdb submit_bio+0xf7/0x120 ext4_io_submit+0x2e/0x43 ext4_bio_write_page+0x1b7/0x300 mpage_submit_page+0x60/0x77 mpage_map_and_submit_buffers+0x10f/0x21d ext4_writepages+0xc8c/0xe1b do_writepages+0x23/0x2c __filemap_fdatawrite_range+0x84/0x8b filemap_flush+0x1c/0x1e ext4_alloc_da_blocks+0xb8/0x117 ext4_rename+0x132/0x6dc ? mark_held_locks+0x5f/0x76 ext4_rename2+0x29/0x2b vfs_rename+0x540/0x636 SyS_renameat2+0x359/0x44d SyS_rename+0x1e/0x20 entry_SYSCALL_64_fastpath+0x12/0x6f [minchan@kernel.org: add stable mark] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Kyeongdon Kim <kyeongdon.kim@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

commit 3d5fe03 upstream. We can end up allocating a new compression stream with GFP_KERNEL from within the IO path, which may result is nested (recursive) IO operations. That can introduce problems if the IO path in question is a reclaimer, holding some locks that will deadlock nested IOs. Allocate streams and working memory using GFP_NOIO flag, forbidding recursive IO and FS operations. An example: inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage. git/20158 [HC0[0]:SC0[0]:HE1:SE1] takes: (jbd2_handle){+.+.?.}, at: start_this_handle+0x4ca/0x555 {IN-RECLAIM_FS-W} state was registered at: __lock_acquire+0x8da/0x117b lock_acquire+0x10c/0x1a7 start_this_handle+0x52d/0x555 jbd2__journal_start+0xb4/0x237 __ext4_journal_start_sb+0x108/0x17e ext4_dirty_inode+0x32/0x61 __mark_inode_dirty+0x16b/0x60c iput+0x11e/0x274 __dentry_kill+0x148/0x1b8 shrink_dentry_list+0x274/0x44a prune_dcache_sb+0x4a/0x55 super_cache_scan+0xfc/0x176 shrink_slab.part.14.constprop.25+0x2a2/0x4d3 shrink_zone+0x74/0x140 kswapd+0x6b7/0x930 kthread+0x107/0x10f ret_from_fork+0x3f/0x70 irq event stamp: 138297 hardirqs last enabled at (138297): debug_check_no_locks_freed+0x113/0x12f hardirqs last disabled at (138296): debug_check_no_locks_freed+0x33/0x12f softirqs last enabled at (137818): __do_softirq+0x2d3/0x3e9 softirqs last disabled at (137813): irq_exit+0x41/0x95 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(jbd2_handle); <Interrupt> lock(jbd2_handle); *** DEADLOCK *** 5 locks held by git/20158: #0: (sb_writers#7){.+.+.+}, at: [<ffffffff81155411>] mnt_want_write+0x24/0x4b #1: (&type->i_mutex_dir_key#2/1){+.+.+.}, at: [<ffffffff81145087>] lock_rename+0xd9/0xe3 #2: (&sb->s_type->i_mutex_key#11){+.+.+.}, at: [<ffffffff8114f8e2>] lock_two_nondirectories+0x3f/0x6b #3: (&sb->s_type->i_mutex_key#11/4){+.+.+.}, at: [<ffffffff8114f909>] lock_two_nondirectories+0x66/0x6b #4: (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555 stack backtrace: CPU: 2 PID: 20158 Comm: git Not tainted 4.1.0-rc7-next-20150615-dbg-00016-g8bdf555-dirty torvalds#211 Call Trace: dump_stack+0x4c/0x6e mark_lock+0x384/0x56d mark_held_locks+0x5f/0x76 lockdep_trace_alloc+0xb2/0xb5 kmem_cache_alloc_trace+0x32/0x1e2 zcomp_strm_alloc+0x25/0x73 [zram] zcomp_strm_multi_find+0xe7/0x173 [zram] zcomp_strm_find+0xc/0xe [zram] zram_bvec_rw+0x2ca/0x7e0 [zram] zram_make_request+0x1fa/0x301 [zram] generic_make_request+0x9c/0xdb submit_bio+0xf7/0x120 ext4_io_submit+0x2e/0x43 ext4_bio_write_page+0x1b7/0x300 mpage_submit_page+0x60/0x77 mpage_map_and_submit_buffers+0x10f/0x21d ext4_writepages+0xc8c/0xe1b do_writepages+0x23/0x2c __filemap_fdatawrite_range+0x84/0x8b filemap_flush+0x1c/0x1e ext4_alloc_da_blocks+0xb8/0x117 ext4_rename+0x132/0x6dc ? mark_held_locks+0x5f/0x76 ext4_rename2+0x29/0x2b vfs_rename+0x540/0x636 SyS_renameat2+0x359/0x44d SyS_rename+0x1e/0x20 entry_SYSCALL_64_fastpath+0x12/0x6f [minchan@kernel.org: add stable mark] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Kyeongdon Kim <kyeongdon.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3d5fe03 upstream. We can end up allocating a new compression stream with GFP_KERNEL from within the IO path, which may result is nested (recursive) IO operations. That can introduce problems if the IO path in question is a reclaimer, holding some locks that will deadlock nested IOs. Allocate streams and working memory using GFP_NOIO flag, forbidding recursive IO and FS operations. An example: inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage. git/20158 [HC0[0]:SC0[0]:HE1:SE1] takes: (jbd2_handle){+.+.?.}, at: start_this_handle+0x4ca/0x555 {IN-RECLAIM_FS-W} state was registered at: __lock_acquire+0x8da/0x117b lock_acquire+0x10c/0x1a7 start_this_handle+0x52d/0x555 jbd2__journal_start+0xb4/0x237 __ext4_journal_start_sb+0x108/0x17e ext4_dirty_inode+0x32/0x61 __mark_inode_dirty+0x16b/0x60c iput+0x11e/0x274 __dentry_kill+0x148/0x1b8 shrink_dentry_list+0x274/0x44a prune_dcache_sb+0x4a/0x55 super_cache_scan+0xfc/0x176 shrink_slab.part.14.constprop.25+0x2a2/0x4d3 shrink_zone+0x74/0x140 kswapd+0x6b7/0x930 kthread+0x107/0x10f ret_from_fork+0x3f/0x70 irq event stamp: 138297 hardirqs last enabled at (138297): debug_check_no_locks_freed+0x113/0x12f hardirqs last disabled at (138296): debug_check_no_locks_freed+0x33/0x12f softirqs last enabled at (137818): __do_softirq+0x2d3/0x3e9 softirqs last disabled at (137813): irq_exit+0x41/0x95 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(jbd2_handle); <Interrupt> lock(jbd2_handle); *** DEADLOCK *** 5 locks held by git/20158: #0: (sb_writers#7){.+.+.+}, at: [<ffffffff81155411>] mnt_want_write+0x24/0x4b #1: (&type->i_mutex_dir_key#2/1){+.+.+.}, at: [<ffffffff81145087>] lock_rename+0xd9/0xe3 #2: (&sb->s_type->i_mutex_key#11){+.+.+.}, at: [<ffffffff8114f8e2>] lock_two_nondirectories+0x3f/0x6b #3: (&sb->s_type->i_mutex_key#11/4){+.+.+.}, at: [<ffffffff8114f909>] lock_two_nondirectories+0x66/0x6b #4: (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555 stack backtrace: CPU: 2 PID: 20158 Comm: git Not tainted 4.1.0-rc7-next-20150615-dbg-00016-g8bdf555-dirty #211 Call Trace: dump_stack+0x4c/0x6e mark_lock+0x384/0x56d mark_held_locks+0x5f/0x76 lockdep_trace_alloc+0xb2/0xb5 kmem_cache_alloc_trace+0x32/0x1e2 zcomp_strm_alloc+0x25/0x73 [zram] zcomp_strm_multi_find+0xe7/0x173 [zram] zcomp_strm_find+0xc/0xe [zram] zram_bvec_rw+0x2ca/0x7e0 [zram] zram_make_request+0x1fa/0x301 [zram] generic_make_request+0x9c/0xdb submit_bio+0xf7/0x120 ext4_io_submit+0x2e/0x43 ext4_bio_write_page+0x1b7/0x300 mpage_submit_page+0x60/0x77 mpage_map_and_submit_buffers+0x10f/0x21d ext4_writepages+0xc8c/0xe1b do_writepages+0x23/0x2c __filemap_fdatawrite_range+0x84/0x8b filemap_flush+0x1c/0x1e ext4_alloc_da_blocks+0xb8/0x117 ext4_rename+0x132/0x6dc ? mark_held_locks+0x5f/0x76 ext4_rename2+0x29/0x2b vfs_rename+0x540/0x636 SyS_renameat2+0x359/0x44d SyS_rename+0x1e/0x20 entry_SYSCALL_64_fastpath+0x12/0x6f [minchan@kernel.org: add stable mark] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Kyeongdon Kim <kyeongdon.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

BugLink: http://bugs.launchpad.net/bugs/1540532 commit 3d5fe03 upstream. We can end up allocating a new compression stream with GFP_KERNEL from within the IO path, which may result is nested (recursive) IO operations. That can introduce problems if the IO path in question is a reclaimer, holding some locks that will deadlock nested IOs. Allocate streams and working memory using GFP_NOIO flag, forbidding recursive IO and FS operations. An example: inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage. git/20158 [HC0[0]:SC0[0]:HE1:SE1] takes: (jbd2_handle){+.+.?.}, at: start_this_handle+0x4ca/0x555 {IN-RECLAIM_FS-W} state was registered at: __lock_acquire+0x8da/0x117b lock_acquire+0x10c/0x1a7 start_this_handle+0x52d/0x555 jbd2__journal_start+0xb4/0x237 __ext4_journal_start_sb+0x108/0x17e ext4_dirty_inode+0x32/0x61 __mark_inode_dirty+0x16b/0x60c iput+0x11e/0x274 __dentry_kill+0x148/0x1b8 shrink_dentry_list+0x274/0x44a prune_dcache_sb+0x4a/0x55 super_cache_scan+0xfc/0x176 shrink_slab.part.14.constprop.25+0x2a2/0x4d3 shrink_zone+0x74/0x140 kswapd+0x6b7/0x930 kthread+0x107/0x10f ret_from_fork+0x3f/0x70 irq event stamp: 138297 hardirqs last enabled at (138297): debug_check_no_locks_freed+0x113/0x12f hardirqs last disabled at (138296): debug_check_no_locks_freed+0x33/0x12f softirqs last enabled at (137818): __do_softirq+0x2d3/0x3e9 softirqs last disabled at (137813): irq_exit+0x41/0x95 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(jbd2_handle); <Interrupt> lock(jbd2_handle); *** DEADLOCK *** 5 locks held by git/20158: #0: (sb_writers#7){.+.+.+}, at: [<ffffffff81155411>] mnt_want_write+0x24/0x4b #1: (&type->i_mutex_dir_key#2/1){+.+.+.}, at: [<ffffffff81145087>] lock_rename+0xd9/0xe3 #2: (&sb->s_type->i_mutex_key#11){+.+.+.}, at: [<ffffffff8114f8e2>] lock_two_nondirectories+0x3f/0x6b #3: (&sb->s_type->i_mutex_key#11/4){+.+.+.}, at: [<ffffffff8114f909>] lock_two_nondirectories+0x66/0x6b #4: (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555 stack backtrace: CPU: 2 PID: 20158 Comm: git Not tainted 4.1.0-rc7-next-20150615-dbg-00016-g8bdf555-dirty torvalds#211 Call Trace: dump_stack+0x4c/0x6e mark_lock+0x384/0x56d mark_held_locks+0x5f/0x76 lockdep_trace_alloc+0xb2/0xb5 kmem_cache_alloc_trace+0x32/0x1e2 zcomp_strm_alloc+0x25/0x73 [zram] zcomp_strm_multi_find+0xe7/0x173 [zram] zcomp_strm_find+0xc/0xe [zram] zram_bvec_rw+0x2ca/0x7e0 [zram] zram_make_request+0x1fa/0x301 [zram] generic_make_request+0x9c/0xdb submit_bio+0xf7/0x120 ext4_io_submit+0x2e/0x43 ext4_bio_write_page+0x1b7/0x300 mpage_submit_page+0x60/0x77 mpage_map_and_submit_buffers+0x10f/0x21d ext4_writepages+0xc8c/0xe1b do_writepages+0x23/0x2c __filemap_fdatawrite_range+0x84/0x8b filemap_flush+0x1c/0x1e ext4_alloc_da_blocks+0xb8/0x117 ext4_rename+0x132/0x6dc ? mark_held_locks+0x5f/0x76 ext4_rename2+0x29/0x2b vfs_rename+0x540/0x636 SyS_renameat2+0x359/0x44d SyS_rename+0x1e/0x20 entry_SYSCALL_64_fastpath+0x12/0x6f [minchan@kernel.org: add stable mark] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Kyeongdon Kim <kyeongdon.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com>

This reverts commit 118694c. The reverted commit was causing 50% eunumeration failures for mass_storage gadget with the below backtrace. The commit was supposed to make dwc3 little faster. However, testing with mass storage gadget on am437x-gp-evm (with backing storage in RAM) gives no diffrence in performance with or without the patch. We choose to sacrifice any (minor) performance gain for stability. [ 73.526467] ------------[ cut here ]------------ [ 73.531230] WARNING: CPU: 0 PID: 2195 at drivers/usb/dwc3/ep0.c:306 dwc3_ep0_out_start+0x44/0x50 [dwc3]() [ 73.540854] Modules linked in: g_mass_storage usb_f_mass_storage libcomposite ipv6 xhci_plat_hcd xhci_hcd usbcore evdev joydev dwc3 pru_rproc udc_core ti_am335x_adc kfifo_c [ 73.582299] CPU: 0 PID: 2195 Comm: irq/266-dwc3 Not tainted 4.1.18-00998-ga6a31ce torvalds#211 [ 73.590267] Hardware name: Generic AM43 (Flattened Device Tree) [ 73.596224] Backtrace: [ 73.598751] [<c0012b2c>] (dump_backtrace) from [<c0012cc8>] (show_stack+0x18/0x1c) [ 73.606366] r6:00000000 r5:00000000 r4:20000093 r3:00000000 [ 73.612152] [<c0012cb0>] (show_stack) from [<c0623200>] (dump_stack+0x94/0xb4) [ 73.619448] [<c062316c>] (dump_stack) from [<c0041f40>] (warn_slowpath_common+0x80/0xbc) [ 73.627585] r6:00000132 r5:bf0f6854 r4:00000000 r3:ed1cc000 [ 73.633361] [<c0041ec0>] (warn_slowpath_common) from [<c0041fa0>] (warn_slowpath_null+0x24/0x2c) [ 73.642194] r8:00000000 r7:0000030c r6:00000000 r5:f22c5000 r4:ee494010 [ 73.649073] [<c0041f7c>] (warn_slowpath_null) from [<bf0f6854>] (dwc3_ep0_out_start+0x44/0x50 [dwc3]) [ 73.658434] [<bf0f6810>] (dwc3_ep0_out_start [dwc3]) from [<bf0f6b0c>] (dwc3_ep0_interrupt+0x1dc/0xae4 [dwc3]) [ 73.668570] [<bf0f6930>] (dwc3_ep0_interrupt [dwc3]) from [<bf0f4be8>] (dwc3_thread_interrupt+0x7f4/0x9e4 [dwc3]) [ 73.678890] r10:ed17e380 r9:00000000 r8:00000000 r7:0000030c r6:ee494010 r5:00000004 [ 73.686847] r4:ed66e890 [ 73.689461] [<bf0f43f4>] (dwc3_thread_interrupt [dwc3]) from [<c0081a14>] (irq_thread_fn+0x24/0x3c) [ 73.698558] r10:00000000 r9:00000001 r8:ed4047c0 r7:ed13f780 r6:ed13f780 r5:00000000 [ 73.706513] r4:ed4047c0 [ 73.709094] [<c00819f0>] (irq_thread_fn) from [<c0081be8>] (irq_thread+0x158/0x1b8) [ 73.716795] r6:00000001 r5:00000000 r4:ed4047e0 r3:c00819f0 [ 73.722575] [<c0081a90>] (irq_thread) from [<c005b138>] (kthread+0xdc/0xf8) [ 73.729578] r10:00000000 r9:00000000 r8:00000000 r7:c0081a90 r6:ed4047c0 r5:ed4045c0 [ 73.737531] r4:00000000 [ 73.740121] [<c005b05c>] (kthread) from [<c000fc28>] (ret_from_fork+0x14/0x2c) [ 73.747384] r7:00000000 r6:00000000 r5:c005b05c r4:ed4045c0 [ 73.753140] ---[ end trace 7a5e0f83644dd200 ]--- Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>

(cherry picked from commit 3d5fe03) We can end up allocating a new compression stream with GFP_KERNEL from within the IO path, which may result is nested (recursive) IO operations. That can introduce problems if the IO path in question is a reclaimer, holding some locks that will deadlock nested IOs. Allocate streams and working memory using GFP_NOIO flag, forbidding recursive IO and FS operations. An example: inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage. git/20158 [HC0[0]:SC0[0]:HE1:SE1] takes: (jbd2_handle){+.+.?.}, at: start_this_handle+0x4ca/0x555 {IN-RECLAIM_FS-W} state was registered at: __lock_acquire+0x8da/0x117b lock_acquire+0x10c/0x1a7 start_this_handle+0x52d/0x555 jbd2__journal_start+0xb4/0x237 __ext4_journal_start_sb+0x108/0x17e ext4_dirty_inode+0x32/0x61 __mark_inode_dirty+0x16b/0x60c iput+0x11e/0x274 __dentry_kill+0x148/0x1b8 shrink_dentry_list+0x274/0x44a prune_dcache_sb+0x4a/0x55 super_cache_scan+0xfc/0x176 shrink_slab.part.14.constprop.25+0x2a2/0x4d3 shrink_zone+0x74/0x140 kswapd+0x6b7/0x930 kthread+0x107/0x10f ret_from_fork+0x3f/0x70 irq event stamp: 138297 hardirqs last enabled at (138297): debug_check_no_locks_freed+0x113/0x12f hardirqs last disabled at (138296): debug_check_no_locks_freed+0x33/0x12f softirqs last enabled at (137818): __do_softirq+0x2d3/0x3e9 softirqs last disabled at (137813): irq_exit+0x41/0x95 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(jbd2_handle); <Interrupt> lock(jbd2_handle); *** DEADLOCK *** 5 locks held by git/20158: #0: (sb_writers#7){.+.+.+}, at: [<ffffffff81155411>] mnt_want_write+0x24/0x4b #1: (&type->i_mutex_dir_key#2/1){+.+.+.}, at: [<ffffffff81145087>] lock_rename+0xd9/0xe3 #2: (&sb->s_type->i_mutex_key#11){+.+.+.}, at: [<ffffffff8114f8e2>] lock_two_nondirectories+0x3f/0x6b #3: (&sb->s_type->i_mutex_key#11/4){+.+.+.}, at: [<ffffffff8114f909>] lock_two_nondirectories+0x66/0x6b #4: (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555 stack backtrace: CPU: 2 PID: 20158 Comm: git Not tainted 4.1.0-rc7-next-20150615-dbg-00016-g8bdf555-dirty torvalds#211 Call Trace: dump_stack+0x4c/0x6e mark_lock+0x384/0x56d mark_held_locks+0x5f/0x76 lockdep_trace_alloc+0xb2/0xb5 kmem_cache_alloc_trace+0x32/0x1e2 zcomp_strm_alloc+0x25/0x73 [zram] zcomp_strm_multi_find+0xe7/0x173 [zram] zcomp_strm_find+0xc/0xe [zram] zram_bvec_rw+0x2ca/0x7e0 [zram] zram_make_request+0x1fa/0x301 [zram] generic_make_request+0x9c/0xdb submit_bio+0xf7/0x120 ext4_io_submit+0x2e/0x43 ext4_bio_write_page+0x1b7/0x300 mpage_submit_page+0x60/0x77 mpage_map_and_submit_buffers+0x10f/0x21d ext4_writepages+0xc8c/0xe1b do_writepages+0x23/0x2c __filemap_fdatawrite_range+0x84/0x8b filemap_flush+0x1c/0x1e ext4_alloc_da_blocks+0xb8/0x117 ext4_rename+0x132/0x6dc ? mark_held_locks+0x5f/0x76 ext4_rename2+0x29/0x2b vfs_rename+0x540/0x636 SyS_renameat2+0x359/0x44d SyS_rename+0x1e/0x20 entry_SYSCALL_64_fastpath+0x12/0x6f [minchan@kernel.org: add stable mark] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Kyeongdon Kim <kyeongdon.kim@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Local random address needs to be updated before creating connection if RPA from LE Direct Advertising Report was resolved in host. Otherwise remote device might ignore connection request due to address mismatch. This was affecting following qualification test cases: GAP/CONN/SCEP/BV-03-C, GAP/CONN/GCEP/BV-05-C, GAP/CONN/DCEP/BV-05-C Before patch: < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #11350 [hci0] 84680.231216 Address: 56:BC:E8:24:11:68 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) > HCI Event: Command Complete (0x0e) plen 4 #11351 [hci0] 84680.246022 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #11352 [hci0] 84680.246417 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #11353 [hci0] 84680.248854 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11354 [hci0] 84680.249466 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #11355 [hci0] 84680.253222 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #11356 [hci0] 84680.458387 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:D6:76:8C:DF:82 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) RSSI: -74 dBm (0xb6) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11357 [hci0] 84680.458737 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #11358 [hci0] 84680.469982 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #11359 [hci0] 84680.470444 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #11360 [hci0] 84680.474971 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0 #11361 [hci0] 84682.545385 > HCI Event: Command Complete (0x0e) plen 4 #11362 [hci0] 84682.551014 LE Create Connection Cancel (0x08|0x000e) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #11363 [hci0] 84682.551074 LE Connection Complete (0x01) Status: Unknown Connection Identifier (0x02) Handle: 0 Role: Master (0x00) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Connection interval: 0.00 msec (0x0000) Connection latency: 0 (0x0000) Supervision timeout: 0 msec (0x0000) Master clock accuracy: 0x00 After patch: < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 torvalds#210 [hci0] 667.152459 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 torvalds#211 [hci0] 667.153613 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 torvalds#212 [hci0] 667.153704 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 torvalds#213 [hci0] 667.154584 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 torvalds#214 [hci0] 667.182619 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) RSSI: -70 dBm (0xba) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 torvalds#215 [hci0] 667.182704 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 torvalds#216 [hci0] 667.183599 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 torvalds#217 [hci0] 667.183645 Address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) > HCI Event: Command Complete (0x0e) plen 4 torvalds#218 [hci0] 667.184590 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 torvalds#219 [hci0] 667.184613 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 torvalds#220 [hci0] 667.186558 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 torvalds#221 [hci0] 667.485824 LE Connection Complete (0x01) Status: Success (0x00) Handle: 0 Role: Master (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Master clock accuracy: 0x07 @ MGMT Event: Device Connected (0x000b) plen 13 {0x0002} [hci0] 667.485996 LE Address: 11:22:33:44:55:66 (OUI 11-22-33) Flags: 0x00000000 Data length: 0 Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org

commit 082f230 upstream. Local random address needs to be updated before creating connection if RPA from LE Direct Advertising Report was resolved in host. Otherwise remote device might ignore connection request due to address mismatch. This was affecting following qualification test cases: GAP/CONN/SCEP/BV-03-C, GAP/CONN/GCEP/BV-05-C, GAP/CONN/DCEP/BV-05-C Before patch: < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #11350 [hci0] 84680.231216 Address: 56:BC:E8:24:11:68 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) > HCI Event: Command Complete (0x0e) plen 4 #11351 [hci0] 84680.246022 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #11352 [hci0] 84680.246417 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #11353 [hci0] 84680.248854 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11354 [hci0] 84680.249466 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #11355 [hci0] 84680.253222 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #11356 [hci0] 84680.458387 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:D6:76:8C:DF:82 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) RSSI: -74 dBm (0xb6) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11357 [hci0] 84680.458737 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #11358 [hci0] 84680.469982 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #11359 [hci0] 84680.470444 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #11360 [hci0] 84680.474971 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0 #11361 [hci0] 84682.545385 > HCI Event: Command Complete (0x0e) plen 4 #11362 [hci0] 84682.551014 LE Create Connection Cancel (0x08|0x000e) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #11363 [hci0] 84682.551074 LE Connection Complete (0x01) Status: Unknown Connection Identifier (0x02) Handle: 0 Role: Master (0x00) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Connection interval: 0.00 msec (0x0000) Connection latency: 0 (0x0000) Supervision timeout: 0 msec (0x0000) Master clock accuracy: 0x00 After patch: < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #210 [hci0] 667.152459 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #211 [hci0] 667.153613 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #212 [hci0] 667.153704 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #213 [hci0] 667.154584 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #214 [hci0] 667.182619 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) RSSI: -70 dBm (0xba) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #215 [hci0] 667.182704 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #216 [hci0] 667.183599 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #217 [hci0] 667.183645 Address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) > HCI Event: Command Complete (0x0e) plen 4 #218 [hci0] 667.184590 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #219 [hci0] 667.184613 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #220 [hci0] 667.186558 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #221 [hci0] 667.485824 LE Connection Complete (0x01) Status: Success (0x00) Handle: 0 Role: Master (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Master clock accuracy: 0x07 @ MGMT Event: Device Connected (0x000b) plen 13 {0x0002} [hci0] 667.485996 LE Address: 11:22:33:44:55:66 (OUI 11-22-33) Flags: 0x00000000 Data length: 0 Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 082f230 upstream. Local random address needs to be updated before creating connection if RPA from LE Direct Advertising Report was resolved in host. Otherwise remote device might ignore connection request due to address mismatch. This was affecting following qualification test cases: GAP/CONN/SCEP/BV-03-C, GAP/CONN/GCEP/BV-05-C, GAP/CONN/DCEP/BV-05-C Before patch: < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #11350 [hci0] 84680.231216 Address: 56:BC:E8:24:11:68 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) > HCI Event: Command Complete (0x0e) plen 4 #11351 [hci0] 84680.246022 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #11352 [hci0] 84680.246417 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #11353 [hci0] 84680.248854 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11354 [hci0] 84680.249466 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #11355 [hci0] 84680.253222 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #11356 [hci0] 84680.458387 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:D6:76:8C:DF:82 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) RSSI: -74 dBm (0xb6) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11357 [hci0] 84680.458737 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #11358 [hci0] 84680.469982 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #11359 [hci0] 84680.470444 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #11360 [hci0] 84680.474971 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0 #11361 [hci0] 84682.545385 > HCI Event: Command Complete (0x0e) plen 4 #11362 [hci0] 84682.551014 LE Create Connection Cancel (0x08|0x000e) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #11363 [hci0] 84682.551074 LE Connection Complete (0x01) Status: Unknown Connection Identifier (0x02) Handle: 0 Role: Master (0x00) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Connection interval: 0.00 msec (0x0000) Connection latency: 0 (0x0000) Supervision timeout: 0 msec (0x0000) Master clock accuracy: 0x00 After patch: < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 torvalds#210 [hci0] 667.152459 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 torvalds#211 [hci0] 667.153613 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 torvalds#212 [hci0] 667.153704 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 torvalds#213 [hci0] 667.154584 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 torvalds#214 [hci0] 667.182619 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) RSSI: -70 dBm (0xba) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 torvalds#215 [hci0] 667.182704 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 torvalds#216 [hci0] 667.183599 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 torvalds#217 [hci0] 667.183645 Address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) > HCI Event: Command Complete (0x0e) plen 4 torvalds#218 [hci0] 667.184590 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 torvalds#219 [hci0] 667.184613 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 torvalds#220 [hci0] 667.186558 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 torvalds#221 [hci0] 667.485824 LE Connection Complete (0x01) Status: Success (0x00) Handle: 0 Role: Master (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Master clock accuracy: 0x07 @ MGMT Event: Device Connected (0x000b) plen 13 {0x0002} [hci0] 667.485996 LE Address: 11:22:33:44:55:66 (OUI 11-22-33) Flags: 0x00000000 Data length: 0 Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 082f230 upstream. Local random address needs to be updated before creating connection if RPA from LE Direct Advertising Report was resolved in host. Otherwise remote device might ignore connection request due to address mismatch. This was affecting following qualification test cases: GAP/CONN/SCEP/BV-03-C, GAP/CONN/GCEP/BV-05-C, GAP/CONN/DCEP/BV-05-C Before patch: < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #11350 [hci0] 84680.231216 Address: 56:BC:E8:24:11:68 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) > HCI Event: Command Complete (0x0e) plen 4 #11351 [hci0] 84680.246022 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #11352 [hci0] 84680.246417 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #11353 [hci0] 84680.248854 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11354 [hci0] 84680.249466 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #11355 [hci0] 84680.253222 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #11356 [hci0] 84680.458387 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:D6:76:8C:DF:82 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) RSSI: -74 dBm (0xb6) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11357 [hci0] 84680.458737 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #11358 [hci0] 84680.469982 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #11359 [hci0] 84680.470444 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #11360 [hci0] 84680.474971 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0 #11361 [hci0] 84682.545385 > HCI Event: Command Complete (0x0e) plen 4 #11362 [hci0] 84682.551014 LE Create Connection Cancel (0x08|0x000e) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #11363 [hci0] 84682.551074 LE Connection Complete (0x01) Status: Unknown Connection Identifier (0x02) Handle: 0 Role: Master (0x00) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Connection interval: 0.00 msec (0x0000) Connection latency: 0 (0x0000) Supervision timeout: 0 msec (0x0000) Master clock accuracy: 0x00 After patch: < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #210 [hci0] 667.152459 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #211 [hci0] 667.153613 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #212 [hci0] 667.153704 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #213 [hci0] 667.154584 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #214 [hci0] 667.182619 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) RSSI: -70 dBm (0xba) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #215 [hci0] 667.182704 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #216 [hci0] 667.183599 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #217 [hci0] 667.183645 Address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) > HCI Event: Command Complete (0x0e) plen 4 #218 [hci0] 667.184590 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #219 [hci0] 667.184613 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #220 [hci0] 667.186558 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #221 [hci0] 667.485824 LE Connection Complete (0x01) Status: Success (0x00) Handle: 0 Role: Master (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Master clock accuracy: 0x07 @ MGMT Event: Device Connected (0x000b) plen 13 {0x0002} [hci0] 667.485996 LE Address: 11:22:33:44:55:66 (OUI 11-22-33) Flags: 0x00000000 Data length: 0 Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit ba81043 ] There is a lock inversion and rwsem read-lock recursion in the devfreq target callback which can lead to deadlocks. Specifically, ufshcd_devfreq_scale() already holds a clk_scaling_lock read lock when toggling the write booster, which involves taking the dev_cmd mutex before taking another clk_scaling_lock read lock. This can lead to a deadlock if another thread: 1) tries to acquire the dev_cmd and clk_scaling locks in the correct order, or 2) takes a clk_scaling write lock before the attempt to take the clk_scaling read lock a second time. Fix this by dropping the clk_scaling_lock before toggling the write booster as was done before commit 0e9d4ca ("scsi: ufs: Protect some contexts from unexpected clock scaling"). While the devfreq callbacks are already serialised, add a second serialising mutex to handle the unlikely case where a callback triggered through the devfreq sysfs interface is racing with a request to disable clock scaling through the UFS controller 'clkscale_enable' sysfs attribute. This could otherwise lead to the write booster being left disabled after having disabled clock scaling. Also take the new mutex in ufshcd_clk_scaling_allow() to make sure that any pending write booster update has completed on return. Note that this currently only affects Qualcomm platforms since commit 87bd050 ("scsi: ufs: core: Allow host driver to disable wb toggling during clock scaling"). The lock inversion (i.e. 1 above) was reported by lockdep as: ====================================================== WARNING: possible circular locking dependency detected 6.1.0-next-20221216 torvalds#211 Not tainted ------------------------------------------------------ kworker/u16:2/71 is trying to acquire lock: ffff076280ba98a0 (&hba->dev_cmd.lock){+.+.}-{3:3}, at: ufshcd_query_flag+0x50/0x1c0 but task is already holding lock: ffff076280ba9cf0 (&hba->clk_scaling_lock){++++}-{3:3}, at: ufshcd_devfreq_scale+0x2b8/0x380 which lock already depends on the new lock. [ +0.011606] the existing dependency chain (in reverse order) is: -> #1 (&hba->clk_scaling_lock){++++}-{3:3}: lock_acquire+0x68/0x90 down_read+0x58/0x80 ufshcd_exec_dev_cmd+0x70/0x2c0 ufshcd_verify_dev_init+0x68/0x170 ufshcd_probe_hba+0x398/0x1180 ufshcd_async_scan+0x30/0x320 async_run_entry_fn+0x34/0x150 process_one_work+0x288/0x6c0 worker_thread+0x74/0x450 kthread+0x118/0x120 ret_from_fork+0x10/0x20 -> #0 (&hba->dev_cmd.lock){+.+.}-{3:3}: __lock_acquire+0x12a0/0x2240 lock_acquire.part.0+0xcc/0x220 lock_acquire+0x68/0x90 __mutex_lock+0x98/0x430 mutex_lock_nested+0x2c/0x40 ufshcd_query_flag+0x50/0x1c0 ufshcd_query_flag_retry+0x64/0x100 ufshcd_wb_toggle+0x5c/0x120 ufshcd_devfreq_scale+0x2c4/0x380 ufshcd_devfreq_target+0xf4/0x230 devfreq_set_target+0x84/0x2f0 devfreq_update_target+0xc4/0xf0 devfreq_monitor+0x38/0x1f0 process_one_work+0x288/0x6c0 worker_thread+0x74/0x450 kthread+0x118/0x120 ret_from_fork+0x10/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&hba->clk_scaling_lock); lock(&hba->dev_cmd.lock); lock(&hba->clk_scaling_lock); lock(&hba->dev_cmd.lock); *** DEADLOCK *** Fixes: 0e9d4ca ("scsi: ufs: Protect some contexts from unexpected clock scaling") Cc: stable@vger.kernel.org # 5.12 Cc: Can Guo <quic_cang@quicinc.com> Tested-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230116161201.16923-1-johan+linaro@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit ba81043 upstream. There is a lock inversion and rwsem read-lock recursion in the devfreq target callback which can lead to deadlocks. Specifically, ufshcd_devfreq_scale() already holds a clk_scaling_lock read lock when toggling the write booster, which involves taking the dev_cmd mutex before taking another clk_scaling_lock read lock. This can lead to a deadlock if another thread: 1) tries to acquire the dev_cmd and clk_scaling locks in the correct order, or 2) takes a clk_scaling write lock before the attempt to take the clk_scaling read lock a second time. Fix this by dropping the clk_scaling_lock before toggling the write booster as was done before commit 0e9d4ca ("scsi: ufs: Protect some contexts from unexpected clock scaling"). While the devfreq callbacks are already serialised, add a second serialising mutex to handle the unlikely case where a callback triggered through the devfreq sysfs interface is racing with a request to disable clock scaling through the UFS controller 'clkscale_enable' sysfs attribute. This could otherwise lead to the write booster being left disabled after having disabled clock scaling. Also take the new mutex in ufshcd_clk_scaling_allow() to make sure that any pending write booster update has completed on return. Note that this currently only affects Qualcomm platforms since commit 87bd050 ("scsi: ufs: core: Allow host driver to disable wb toggling during clock scaling"). The lock inversion (i.e. 1 above) was reported by lockdep as: ====================================================== WARNING: possible circular locking dependency detected 6.1.0-next-20221216 torvalds#211 Not tainted ------------------------------------------------------ kworker/u16:2/71 is trying to acquire lock: ffff076280ba98a0 (&hba->dev_cmd.lock){+.+.}-{3:3}, at: ufshcd_query_flag+0x50/0x1c0 but task is already holding lock: ffff076280ba9cf0 (&hba->clk_scaling_lock){++++}-{3:3}, at: ufshcd_devfreq_scale+0x2b8/0x380 which lock already depends on the new lock. [ +0.011606] the existing dependency chain (in reverse order) is: -> #1 (&hba->clk_scaling_lock){++++}-{3:3}: lock_acquire+0x68/0x90 down_read+0x58/0x80 ufshcd_exec_dev_cmd+0x70/0x2c0 ufshcd_verify_dev_init+0x68/0x170 ufshcd_probe_hba+0x398/0x1180 ufshcd_async_scan+0x30/0x320 async_run_entry_fn+0x34/0x150 process_one_work+0x288/0x6c0 worker_thread+0x74/0x450 kthread+0x118/0x120 ret_from_fork+0x10/0x20 -> #0 (&hba->dev_cmd.lock){+.+.}-{3:3}: __lock_acquire+0x12a0/0x2240 lock_acquire.part.0+0xcc/0x220 lock_acquire+0x68/0x90 __mutex_lock+0x98/0x430 mutex_lock_nested+0x2c/0x40 ufshcd_query_flag+0x50/0x1c0 ufshcd_query_flag_retry+0x64/0x100 ufshcd_wb_toggle+0x5c/0x120 ufshcd_devfreq_scale+0x2c4/0x380 ufshcd_devfreq_target+0xf4/0x230 devfreq_set_target+0x84/0x2f0 devfreq_update_target+0xc4/0xf0 devfreq_monitor+0x38/0x1f0 process_one_work+0x288/0x6c0 worker_thread+0x74/0x450 kthread+0x118/0x120 ret_from_fork+0x10/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&hba->clk_scaling_lock); lock(&hba->dev_cmd.lock); lock(&hba->clk_scaling_lock); lock(&hba->dev_cmd.lock); *** DEADLOCK *** Fixes: 0e9d4ca ("scsi: ufs: Protect some contexts from unexpected clock scaling") Cc: stable@vger.kernel.org # 5.12 Cc: Can Guo <quic_cang@quicinc.com> Tested-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230116161201.16923-1-johan+linaro@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>