ggry

Documentation/devicetree/bindings/ata/marvell.txt

@@ -1,7 +1,7 @@
 * Marvell Orion SATA
 
 Required Properties:
-- compatibility : "marvell,orion-sata"
+- compatibility : "marvell,orion-sata" or "marvell,armada-370-sata"
 - reg           : Address range of controller
 - interrupts    : Interrupt controller is using
 - nr-ports      : Number of SATA ports in use.

Documentation/devicetree/bindings/clock/exynos5250-clock.txt

@@ -159,6 +159,8 @@ clock which they consume.
   mixer			343
   hdmi			344
   g2d			345
+  mdma0			346
+  smmu_mdma0		347
 
 
    [Clock Muxes]

Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt

@@ -5,7 +5,11 @@ Required properties :
 
  - reg             : Offset and length of the register set for the device
  - compatible      : Should be "marvell,mv64xxx-i2c" or "allwinner,sun4i-i2c"
-                     or "marvell,mv78230-i2c"
+                     or "marvell,mv78230-i2c" or "marvell,mv78230-a0-i2c"
+                     Note: Only use "marvell,mv78230-a0-i2c" for a very rare,
+                     initial version of the SoC which had broken offload
+                     support.  Linux auto-detects this and sets it
+                     appropriately.
  - interrupts      : The interrupt number
 
 Optional properties :

Documentation/filesystems/proc.txt

@@ -1376,8 +1376,8 @@ may allocate from based on an estimation of its current memory and swap use.
 For example, if a task is using all allowed memory, its badness score will be
 1000.  If it is using half of its allowed memory, its score will be 500.
 
-There is an additional factor included in the badness score: root
-processes are given 3% extra memory over other tasks.
+There is an additional factor included in the badness score: the current memory
+and swap usage is discounted by 3% for root processes.
 
 The amount of "allowed" memory depends on the context in which the oom killer
 was called.  If it is due to the memory assigned to the allocating task's cpuset

Documentation/i2c/busses/i2c-piix4

@@ -13,7 +13,7 @@ Supported adapters:
   * AMD SP5100 (SB700 derivative found on some server mainboards)
     Datasheet: Publicly available at the AMD website
     http://support.amd.com/us/Embedded_TechDocs/44413.pdf
-  * AMD Hudson-2, CZ
+  * AMD Hudson-2, ML, CZ
     Datasheet: Not publicly available
   * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
     Datasheet: Publicly available at the SMSC website http://www.smsc.com

Documentation/kernel-parameters.txt

@@ -1515,6 +1515,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 			* atapi_dmadir: Enable ATAPI DMADIR bridge support
 
+			* disable: Disable this device.
+
 			If there are multiple matching configurations changing
 			the same attribute, the last one is used.
 

Documentation/networking/ip-sysctl.txt

@@ -588,9 +588,6 @@ tcp_limit_output_bytes - INTEGER
 	typical pfifo_fast qdiscs.
 	tcp_limit_output_bytes limits the number of bytes on qdisc
 	or device to reduce artificial RTT/cwnd and reduce bufferbloat.
-	Note: For GSO/TSO enabled flows, we try to have at least two
-	packets in flight. Reducing tcp_limit_output_bytes might also
-	reduce the size of individual GSO packet (64KB being the max)
 	Default: 131072
 
 tcp_challenge_ack_limit - INTEGER

Documentation/networking/packet_mmap.txt

@@ -123,6 +123,16 @@ Transmission process is similar to capture as shown below.
 [shutdown]  close() --------> destruction of the transmission socket and
                               deallocation of all associated resources.
 
+Socket creation and destruction is also straight forward, and is done
+the same way as in capturing described in the previous paragraph:
+
+ int fd = socket(PF_PACKET, mode, 0);
+
+The protocol can optionally be 0 in case we only want to transmit
+via this socket, which avoids an expensive call to packet_rcv().
+In this case, you also need to bind(2) the TX_RING with sll_protocol = 0
+set. Otherwise, htons(ETH_P_ALL) or any other protocol, for example.
+
 Binding the socket to your network interface is mandatory (with zero copy) to
 know the header size of frames used in the circular buffer.
 

Documentation/sysctl/kernel.txt

@@ -290,13 +290,24 @@ Default value is "/sbin/hotplug".
 kptr_restrict:
 
 This toggle indicates whether restrictions are placed on
-exposing kernel addresses via /proc and other interfaces.  When
-kptr_restrict is set to (0), there are no restrictions.  When
-kptr_restrict is set to (1), the default, kernel pointers
-printed using the %pK format specifier will be replaced with 0's
-unless the user has CAP_SYSLOG.  When kptr_restrict is set to
-(2), kernel pointers printed using %pK will be replaced with 0's
-regardless of privileges.
+exposing kernel addresses via /proc and other interfaces.
+
+When kptr_restrict is set to (0), the default, there are no restrictions.
+
+When kptr_restrict is set to (1), kernel pointers printed using the %pK
+format specifier will be replaced with 0's unless the user has CAP_SYSLOG
+and effective user and group ids are equal to the real ids. This is
+because %pK checks are done at read() time rather than open() time, so
+if permissions are elevated between the open() and the read() (e.g via
+a setuid binary) then %pK will not leak kernel pointers to unprivileged
+users. Note, this is a temporary solution only. The correct long-term
+solution is to do the permission checks at open() time. Consider removing
+world read permissions from files that use %pK, and using dmesg_restrict
+to protect against uses of %pK in dmesg(8) if leaking kernel pointer
+values to unprivileged users is a concern.
+
+When kptr_restrict is set to (2), kernel pointers printed using
+%pK will be replaced with 0's regardless of privileges.
 
 ==============================================================
 

Makefile

@@ -1,6 +1,6 @@
 VERSION = 3
 PATCHLEVEL = 12
-SUBLEVEL = 0
+SUBLEVEL = 13
 EXTRAVERSION =
 NAME = One Giant Leap for Frogkind
 

arch/alpha/lib/csum_partial_copy.c

@@ -378,6 +378,11 @@ csum_partial_copy_from_user(const void __user *src, void *dst, int len,
 __wsum
 csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
 {
-	return csum_partial_copy_from_user((__force const void __user *)src,
-			dst, len, sum, NULL);
+	__wsum checksum;
+	mm_segment_t oldfs = get_fs();
+	set_fs(KERNEL_DS);
+	checksum = csum_partial_copy_from_user((__force const void __user *)src,
+						dst, len, sum, NULL);
+	set_fs(oldfs);
+	return checksum;
 }

arch/arm/boot/dts/armada-370-db.dts

@@ -99,22 +99,22 @@
 					spi-max-frequency = <50000000>;
 				};
 			};
+		};
 
-			pcie-controller {
+		pcie-controller {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * both standard PCIe slots and mini-PCIe
+			 * slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
 				status = "okay";
-				/*
-				 * The two PCIe units are accessible through
-				 * both standard PCIe slots and mini-PCIe
-				 * slots on the board.
-				 */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-				pcie@2,0 {
-					/* Port 1, Lane 0 */
-					status = "okay";
-				};
 			};
 		};
 	};

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -117,7 +117,7 @@
 
 			coherency-fabric@20200 {
 				compatible = "marvell,coherency-fabric";
-				reg = <0x20200 0xb0>, <0x21810 0x1c>;
+				reg = <0x20200 0xb0>, <0x21010 0x1c>;
 			};
 
 			serial@12000 {
@@ -143,7 +143,7 @@
 			};
 
 			sata@a0000 {
-				compatible = "marvell,orion-sata";
+				compatible = "marvell,armada-370-sata";
 				reg = <0xa0000 0x5000>;
 				interrupts = <55>;
 				clocks = <&gateclk 15>, <&gateclk 30>;

arch/arm/boot/dts/armada-xp-mv78230.dtsi

@@ -47,7 +47,7 @@
 		/*
 		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
 		 * configured as x4 or quad x1 lanes. One unit is
-		 * x4/x1.
+		 * x1 only.
 		 */
 		pcie-controller {
 			compatible = "marvell,armada-xp-pcie";
@@ -61,10 +61,10 @@
 
 			ranges =
 			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
 				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
 				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
 				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
 				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
 				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
 				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
@@ -73,8 +73,8 @@
 				0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
 				0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
 				0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-				0x82000000 0x9 0       MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
-				0x81000000 0x9 0       MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
+				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
 
 			pcie@1,0 {
 				device_type = "pci";
@@ -144,20 +144,20 @@
 				status = "disabled";
 			};
 
-			pcie@9,0 {
+			pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
-				marvell,pcie-port = <2>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
+				clocks = <&gateclk 9>;
 				status = "disabled";
 			};
 		};