ARM: orion5x: Refactor mpp code to use common orion platform mpp.

Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
torvalds · May 16, 2011 · 554cdae · 554cdae
1 parent b2f427a
commit 554cdae
Show file tree

Hide file tree

Showing 23 changed files with 622 additions and 688 deletions.
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
@@ -267,28 +267,28 @@ static struct platform_device d2net_gpio_buttons = {
  * General Setup
  ****************************************************************************/
 
-static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = {
-	{  0, MPP_GPIO },	/* Board ID (bit 0) */
-	{  1, MPP_GPIO },	/* Board ID (bit 1) */
-	{  2, MPP_GPIO },	/* Board ID (bit 2) */
-	{  3, MPP_GPIO },	/* SATA 0 power */
-	{  4, MPP_UNUSED },
-	{  5, MPP_GPIO },	/* Fan fail detection */
-	{  6, MPP_GPIO },	/* Red front LED */
-	{  7, MPP_UNUSED },
-	{  8, MPP_GPIO },	/* Rear power switch (on|auto) */
-	{  9, MPP_GPIO },	/* Rear power switch (auto|off) */
-	{ 10, MPP_UNUSED },
-	{ 11, MPP_UNUSED },
-	{ 12, MPP_GPIO },	/* SATA 1 power */
-	{ 13, MPP_UNUSED },
-	{ 14, MPP_SATA_LED },	/* SATA 0 active */
-	{ 15, MPP_SATA_LED },	/* SATA 1 active */
-	{ 16, MPP_GPIO },	/* Blue front LED blink control */
-	{ 17, MPP_UNUSED },
-	{ 18, MPP_GPIO },	/* Front button (0 = Released, 1 = Pushed ) */
-	{ 19, MPP_UNUSED },
-	{ -1 }
+static unsigned int d2net_mpp_modes[] __initdata = {
+	MPP0_GPIO,	/* Board ID (bit 0) */
+	MPP1_GPIO,	/* Board ID (bit 1) */
+	MPP2_GPIO,	/* Board ID (bit 2) */
+	MPP3_GPIO,	/* SATA 0 power */
+	MPP4_UNUSED,
+	MPP5_GPIO,	/* Fan fail detection */
+	MPP6_GPIO,	/* Red front LED */
+	MPP7_UNUSED,
+	MPP8_GPIO,	/* Rear power switch (on|auto) */
+	MPP9_GPIO,	/* Rear power switch (auto|off) */
+	MPP10_UNUSED,
+	MPP11_UNUSED,
+	MPP12_GPIO,	/* SATA 1 power */
+	MPP13_UNUSED,
+	MPP14_SATA_LED,	/* SATA 0 active */
+	MPP15_SATA_LED,	/* SATA 1 active */
+	MPP16_GPIO,	/* Blue front LED blink control */
+	MPP17_UNUSED,
+	MPP18_GPIO,	/* Front button (0 = Released, 1 = Pushed ) */
+	MPP19_UNUSED,
+	0,
 	/* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
 	/* 23: Blue front LED off */
 	/* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */

diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -298,28 +298,28 @@ static struct i2c_board_info __initdata db88f5281_i2c_rtc = {
 /*****************************************************************************
  * General Setup
  ****************************************************************************/
-static struct orion5x_mpp_mode db88f5281_mpp_modes[] __initdata = {
-	{  0, MPP_GPIO },		/* USB Over Current */
-	{  1, MPP_GPIO },		/* USB Vbat input */
-	{  2, MPP_PCI_ARB },		/* PCI_REQn[2] */
-	{  3, MPP_PCI_ARB },		/* PCI_GNTn[2] */
-	{  4, MPP_PCI_ARB },		/* PCI_REQn[3] */
-	{  5, MPP_PCI_ARB },		/* PCI_GNTn[3] */
-	{  6, MPP_GPIO },		/* JP0, CON17.2 */
-	{  7, MPP_GPIO },		/* JP1, CON17.1 */
-	{  8, MPP_GPIO },		/* JP2, CON11.2 */
-	{  9, MPP_GPIO },		/* JP3, CON11.3 */
-	{ 10, MPP_GPIO },		/* RTC int */
-	{ 11, MPP_GPIO },		/* Baud Rate Generator */
-	{ 12, MPP_GPIO },		/* PCI int 1 */
-	{ 13, MPP_GPIO },		/* PCI int 2 */
-	{ 14, MPP_NAND },		/* NAND_REn[2] */
-	{ 15, MPP_NAND },		/* NAND_WEn[2] */
-	{ 16, MPP_UART },		/* UART1_RX */
-	{ 17, MPP_UART },		/* UART1_TX */
-	{ 18, MPP_UART },		/* UART1_CTSn */
-	{ 19, MPP_UART },		/* UART1_RTSn */
-	{ -1 },
+static unsigned int db88f5281_mpp_modes[] __initdata = {
+	MPP0_GPIO,		/* USB Over Current */
+	MPP1_GPIO,		/* USB Vbat input */
+	MPP2_PCI_ARB,		/* PCI_REQn[2] */
+	MPP3_PCI_ARB,		/* PCI_GNTn[2] */
+	MPP4_PCI_ARB,		/* PCI_REQn[3] */
+	MPP5_PCI_ARB,		/* PCI_GNTn[3] */
+	MPP6_GPIO,		/* JP0, CON17.2 */
+	MPP7_GPIO,		/* JP1, CON17.1 */
+	MPP8_GPIO,		/* JP2, CON11.2 */
+	MPP9_GPIO,		/* JP3, CON11.3 */
+	MPP10_GPIO,		/* RTC int */
+	MPP11_GPIO,		/* Baud Rate Generator */
+	MPP12_GPIO,		/* PCI int 1 */
+	MPP13_GPIO,		/* PCI int 2 */
+	MPP14_NAND,		/* NAND_REn[2] */
+	MPP15_NAND,		/* NAND_WEn[2] */
+	MPP16_UART,		/* UART1_RX */
+	MPP17_UART,		/* UART1_TX */
+	MPP18_UART,		/* UART1_CTSn */
+	MPP19_UART,		/* UART1_RTSn */
+	0,
 };
 
 static void __init db88f5281_init(void)

diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
@@ -385,76 +385,76 @@ static struct mv_sata_platform_data dns323_sata_data = {
 /****************************************************************************
  * General Setup
  */
-static struct orion5x_mpp_mode dns323a_mpp_modes[] __initdata = {
-	{  0, MPP_PCIE_RST_OUTn },
-	{  1, MPP_GPIO },		/* right amber LED (sata ch0) */
-	{  2, MPP_GPIO },		/* left amber LED (sata ch1) */
-	{  3, MPP_UNUSED },
-	{  4, MPP_GPIO },		/* power button LED */
-	{  5, MPP_GPIO },		/* power button LED */
-	{  6, MPP_GPIO },		/* GMT G751-2f overtemp */
-	{  7, MPP_GPIO },		/* M41T80 nIRQ/OUT/SQW */
-	{  8, MPP_GPIO },		/* triggers power off */
-	{  9, MPP_GPIO },		/* power button switch */
-	{ 10, MPP_GPIO },		/* reset button switch */
-	{ 11, MPP_UNUSED },
-	{ 12, MPP_UNUSED },
-	{ 13, MPP_UNUSED },
-	{ 14, MPP_UNUSED },
-	{ 15, MPP_UNUSED },
-	{ 16, MPP_UNUSED },
-	{ 17, MPP_UNUSED },
-	{ 18, MPP_UNUSED },
-	{ 19, MPP_UNUSED },
-	{ -1 },
+static unsigned int dns323a_mpp_modes[] __initdata = {
+	MPP0_PCIE_RST_OUTn,
+	MPP1_GPIO,		/* right amber LED (sata ch0) */
+	MPP2_GPIO,		/* left amber LED (sata ch1) */
+	MPP3_UNUSED,
+	MPP4_GPIO,		/* power button LED */
+	MPP5_GPIO,		/* power button LED */
+	MPP6_GPIO,		/* GMT G751-2f overtemp */
+	MPP7_GPIO,		/* M41T80 nIRQ/OUT/SQW */
+	MPP8_GPIO,		/* triggers power off */
+	MPP9_GPIO,		/* power button switch */
+	MPP10_GPIO,		/* reset button switch */
+	MPP11_UNUSED,
+	MPP12_UNUSED,
+	MPP13_UNUSED,
+	MPP14_UNUSED,
+	MPP15_UNUSED,
+	MPP16_UNUSED,
+	MPP17_UNUSED,
+	MPP18_UNUSED,
+	MPP19_UNUSED,
+	0,
 };
 
-static struct orion5x_mpp_mode dns323b_mpp_modes[] __initdata = {
-	{  0, MPP_UNUSED },
-	{  1, MPP_GPIO },		/* right amber LED (sata ch0) */
-	{  2, MPP_GPIO },		/* left amber LED (sata ch1) */
-	{  3, MPP_GPIO },		/* system up flag */
-	{  4, MPP_GPIO },		/* power button LED */
-	{  5, MPP_GPIO },		/* power button LED */
-	{  6, MPP_GPIO },		/* GMT G751-2f overtemp */
-	{  7, MPP_GPIO },		/* M41T80 nIRQ/OUT/SQW */
-	{  8, MPP_GPIO },		/* triggers power off */
-	{  9, MPP_GPIO },		/* power button switch */
-	{ 10, MPP_GPIO },		/* reset button switch */
-	{ 11, MPP_UNUSED },
-	{ 12, MPP_SATA_LED },
-	{ 13, MPP_SATA_LED },
-	{ 14, MPP_SATA_LED },
-	{ 15, MPP_SATA_LED },
-	{ 16, MPP_UNUSED },
-	{ 17, MPP_UNUSED },
-	{ 18, MPP_UNUSED },
-	{ 19, MPP_UNUSED },
-	{ -1 },
+static unsigned int dns323b_mpp_modes[] __initdata = {
+	MPP0_UNUSED,
+	MPP1_GPIO,		/* right amber LED (sata ch0) */
+	MPP2_GPIO,		/* left amber LED (sata ch1) */
+	MPP3_GPIO,		/* system up flag */
+	MPP4_GPIO,		/* power button LED */
+	MPP5_GPIO,		/* power button LED */
+	MPP6_GPIO,		/* GMT G751-2f overtemp */
+	MPP7_GPIO,		/* M41T80 nIRQ/OUT/SQW */
+	MPP8_GPIO,		/* triggers power off */
+	MPP9_GPIO,		/* power button switch */
+	MPP10_GPIO,		/* reset button switch */
+	MPP11_UNUSED,
+	MPP12_SATA_LED,
+	MPP13_SATA_LED,
+	MPP14_SATA_LED,
+	MPP15_SATA_LED,
+	MPP16_UNUSED,
+	MPP17_UNUSED,
+	MPP18_UNUSED,
+	MPP19_UNUSED,
+	0,
 };
 
-static struct orion5x_mpp_mode dns323c_mpp_modes[] __initdata = {
-	{  0, MPP_GPIO },		/* ? input */
-	{  1, MPP_GPIO },		/* input power switch (0 = pressed) */
-	{  2, MPP_GPIO },		/* output power off */
-	{  3, MPP_UNUSED },		/* ? output */
-	{  4, MPP_UNUSED },		/* ? output */
-	{  5, MPP_UNUSED },		/* ? output */
-	{  6, MPP_UNUSED },		/* ? output */
-	{  7, MPP_UNUSED },		/* ? output */
-	{  8, MPP_GPIO },		/* i/o right amber LED */
-	{  9, MPP_GPIO },		/* i/o left amber LED */
-	{ 10, MPP_GPIO },		/* input */
-	{ 11, MPP_UNUSED },
-	{ 12, MPP_SATA_LED },
-	{ 13, MPP_SATA_LED },
-	{ 14, MPP_SATA_LED },
-	{ 15, MPP_SATA_LED },
-	{ 16, MPP_UNUSED },
-	{ 17, MPP_GPIO },		/* power button LED */
-	{ 18, MPP_GPIO },		/* fan speed bit 0 */
-	{ 19, MPP_GPIO },		/* fan speed bit 1 */
-	{ -1 },
+static unsigned int dns323c_mpp_modes[] __initdata = {
+	MPP0_GPIO,		/* ? input */
+	MPP1_GPIO,		/* input power switch (0 = pressed) */
+	MPP2_GPIO,		/* output power off */
+	MPP3_UNUSED,		/* ? output */
+	MPP4_UNUSED,		/* ? output */
+	MPP5_UNUSED,		/* ? output */
+	MPP6_UNUSED,		/* ? output */
+	MPP7_UNUSED,		/* ? output */
+	MPP8_GPIO,		/* i/o right amber LED */
+	MPP9_GPIO,		/* i/o left amber LED */
+	MPP10_GPIO,		/* input */
+	MPP11_UNUSED,
+	MPP12_SATA_LED,
+	MPP13_SATA_LED,
+	MPP14_SATA_LED,
+	MPP15_SATA_LED,
+	MPP16_UNUSED,
+	MPP17_GPIO,		/* power button LED */
+	MPP18_GPIO,		/* fan speed bit 0 */
+	MPP19_GPIO,		/* fan speed bit 1 */
+	0,
 };
 
 /* Rev C1 Fan speed notes:

diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -180,31 +180,31 @@ static struct platform_device edmini_v2_gpio_buttons = {
 /*****************************************************************************
  * General Setup
  ****************************************************************************/
-static struct orion5x_mpp_mode edminiv2_mpp_modes[] __initdata = {
-	{  0, MPP_UNUSED },
-	{  1, MPP_UNUSED },
-	{  2, MPP_UNUSED },
-	{  3, MPP_GPIO },	/* RTC interrupt */
-	{  4, MPP_UNUSED },
-	{  5, MPP_UNUSED },
-	{  6, MPP_UNUSED },
-	{  7, MPP_UNUSED },
-	{  8, MPP_UNUSED },
-	{  9, MPP_UNUSED },
-	{ 10, MPP_UNUSED },
-	{ 11, MPP_UNUSED },
-	{ 12, MPP_SATA_LED },	/* SATA 0 presence */
-	{ 13, MPP_SATA_LED },	/* SATA 1 presence */
-	{ 14, MPP_SATA_LED },	/* SATA 0 active */
-	{ 15, MPP_SATA_LED },	/* SATA 1 active */
+static unsigned int edminiv2_mpp_modes[] __initdata = {
+	MPP0_UNUSED,
+	MPP1_UNUSED,
+	MPP2_UNUSED,
+	MPP3_GPIO,	/* RTC interrupt */
+	MPP4_UNUSED,
+	MPP5_UNUSED,
+	MPP6_UNUSED,
+	MPP7_UNUSED,
+	MPP8_UNUSED,
+	MPP9_UNUSED,
+	MPP10_UNUSED,
+	MPP11_UNUSED,
+	MPP12_SATA_LED,	/* SATA 0 presence */
+	MPP13_SATA_LED,	/* SATA 1 presence */
+	MPP14_SATA_LED,	/* SATA 0 active */
+	MPP15_SATA_LED,	/* SATA 1 active */
 	/* 16: Power LED control (0 = On, 1 = Off) */
-	{ 16, MPP_GPIO },
+	MPP16_GPIO,
 	/* 17: Power LED control select (0 = CPLD, 1 = GPIO16) */
-	{ 17, MPP_GPIO },
+	MPP17_GPIO,
 	/* 18: Power button status (0 = Released, 1 = Pressed) */
-	{ 18, MPP_GPIO },
-	{ 19, MPP_UNUSED },
-	{ -1 }
+	MPP18_GPIO,
+	MPP19_UNUSED,
+	0,
 };
 
 static void __init edmini_v2_init(void)

diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -315,28 +315,28 @@ static void kurobox_pro_power_off(void)
 /*****************************************************************************
  * General Setup
  ****************************************************************************/
-static struct orion5x_mpp_mode kurobox_pro_mpp_modes[] __initdata = {
-	{  0, MPP_UNUSED },
-	{  1, MPP_UNUSED },
-	{  2, MPP_GPIO },		/* GPIO Micon */
-	{  3, MPP_GPIO },		/* GPIO Rtc */
-	{  4, MPP_UNUSED },
-	{  5, MPP_UNUSED },
-	{  6, MPP_NAND },		/* NAND Flash REn */
-	{  7, MPP_NAND },		/* NAND Flash WEn */
-	{  8, MPP_UNUSED },
-	{  9, MPP_UNUSED },
-	{ 10, MPP_UNUSED },
-	{ 11, MPP_UNUSED },
-	{ 12, MPP_SATA_LED },		/* SATA 0 presence */
-	{ 13, MPP_SATA_LED },		/* SATA 1 presence */
-	{ 14, MPP_SATA_LED },		/* SATA 0 active */
-	{ 15, MPP_SATA_LED },		/* SATA 1 active */
-	{ 16, MPP_UART },		/* UART1 RXD */
-	{ 17, MPP_UART },		/* UART1 TXD */
-	{ 18, MPP_UART },		/* UART1 CTSn */
-	{ 19, MPP_UART },		/* UART1 RTSn */
-	{ -1 },
+static unsigned int kurobox_pro_mpp_modes[] __initdata = {
+	MPP0_UNUSED,
+	MPP1_UNUSED,
+	MPP2_GPIO,		/* GPIO Micon */
+	MPP3_GPIO,		/* GPIO Rtc */
+	MPP4_UNUSED,
+	MPP5_UNUSED,
+	MPP6_NAND,		/* NAND Flash REn */
+	MPP7_NAND,		/* NAND Flash WEn */
+	MPP8_UNUSED,
+	MPP9_UNUSED,
+	MPP10_UNUSED,
+	MPP11_UNUSED,
+	MPP12_SATA_LED,		/* SATA 0 presence */
+	MPP13_SATA_LED,		/* SATA 1 presence */
+	MPP14_SATA_LED,		/* SATA 0 active */
+	MPP15_SATA_LED,		/* SATA 1 active */
+	MPP16_UART,		/* UART1 RXD */
+	MPP17_UART,		/* UART1 TXD */
+	MPP18_UART,		/* UART1 CTSn */
+	MPP19_UART,		/* UART1 RTSn */
+	0,
 };
 
 static void __init kurobox_pro_init(void)