[NETFILTER]: Add CONFIG_NETFILTER_ADVANCED option

The NETFILTER_ADVANCED option hides lots of the rather obscure netfilter
options when disabled and provides defaults (M) that should allow to
run a distribution firewall without further thinking.

Defaults to 'y' to avoid breaking current configurations.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/Kconfig

@@ -144,9 +144,21 @@ config NETFILTER_DEBUG
 	  You can say Y here if you want to get additional messages useful in
 	  debugging the netfilter code.
 
+config NETFILTER_ADVANCED
+	bool "Advanced netfilter configuration"
+	depends on NETFILTER
+	default y
+	help
+	  If you say Y here you can select between all the netfilter modules.
+	  If you say N the more ununsual ones will not be shown and the
+	  basic ones needed by most people will default to 'M'.
+
+	  If unsure, say Y.
+
 config BRIDGE_NETFILTER
 	bool "Bridged IP/ARP packets filtering"
 	depends on BRIDGE && NETFILTER && INET
+	depends on NETFILTER_ADVANCED
 	default y
 	---help---
 	  Enabling this option will let arptables resp. iptables see bridged

net/bridge/netfilter/Kconfig

@@ -3,7 +3,7 @@
 #
 
 menu "Bridge: Netfilter Configuration"
-	depends on BRIDGE && NETFILTER
+	depends on BRIDGE && BRIDGE_NETFILTER
 
 config BRIDGE_NF_EBTABLES
 	tristate "Ethernet Bridge tables (ebtables) support"

net/decnet/netfilter/Kconfig

@@ -4,6 +4,7 @@
 
 menu "DECnet: Netfilter Configuration"
 	depends on DECNET && NETFILTER && EXPERIMENTAL
+	depends on NETFILTER_ADVANCED
 
 config DECNET_NF_GRABULATOR
 	tristate "Routing message grabulator (for userland routing daemon)"

net/ipv4/netfilter/Kconfig

@@ -8,6 +8,7 @@ menu "IP: Netfilter Configuration"
 config NF_CONNTRACK_IPV4
 	tristate "IPv4 connection tracking support (required for NAT)"
 	depends on NF_CONNTRACK
+	default m if NETFILTER_ADVANCED=n
 	---help---
 	  Connection tracking keeps a record of what packets have passed
 	  through your machine, in order to figure out how they are related
@@ -32,6 +33,7 @@ config NF_CONNTRACK_PROC_COMPAT
 
 config IP_NF_QUEUE
 	tristate "IP Userspace queueing via NETLINK (OBSOLETE)"
+	depends on NETFILTER_ADVANCED
 	help
 	  Netfilter has the ability to queue packets to user space: the
 	  netlink device can be used to access them using this driver.
@@ -44,6 +46,7 @@ config IP_NF_QUEUE
 
 config IP_NF_IPTABLES
 	tristate "IP tables support (required for filtering/masq/NAT)"
+	default m if NETFILTER_ADVANCED=n
 	select NETFILTER_XTABLES
 	help
 	  iptables is a general, extensible packet identification framework.
@@ -57,6 +60,7 @@ config IP_NF_IPTABLES
 config IP_NF_MATCH_IPRANGE
 	tristate '"iprange" match support'
 	depends on IP_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This option makes possible to match IP addresses against IP address
 	  ranges.
@@ -66,6 +70,7 @@ config IP_NF_MATCH_IPRANGE
 config IP_NF_MATCH_RECENT
 	tristate '"recent" match support'
 	depends on IP_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This match is used for creating one or many lists of recently
 	  used addresses and then matching against that/those list(s).
@@ -78,6 +83,7 @@ config IP_NF_MATCH_RECENT
 config IP_NF_MATCH_ECN
 	tristate '"ecn" match support'
 	depends on IP_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This option adds a `ECN' match, which allows you to match against
 	  the IPv4 and TCP header ECN fields.
@@ -87,6 +93,7 @@ config IP_NF_MATCH_ECN
 config IP_NF_MATCH_AH
 	tristate '"ah" match support'
 	depends on IP_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This match extension allows you to match a range of SPIs
 	  inside AH header of IPSec packets.
@@ -96,6 +103,7 @@ config IP_NF_MATCH_AH
 config IP_NF_MATCH_TTL
 	tristate '"ttl" match support'
 	depends on IP_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This adds CONFIG_IP_NF_MATCH_TTL option, which enabled the user
 	  to match packets by their TTL value.
@@ -105,17 +113,19 @@ config IP_NF_MATCH_TTL
 config IP_NF_MATCH_ADDRTYPE
 	tristate '"addrtype" address type match support'
 	depends on IP_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This option allows you to match what routing thinks of an address,
 	  eg. UNICAST, LOCAL, BROADCAST, ...
-	
+
 	  If you want to compile it as a module, say M here and read
 	  <file:Documentation/kbuild/modules.txt>.  If unsure, say `N'.
 
 # `filter', generic and specific targets
 config IP_NF_FILTER
 	tristate "Packet filtering"
 	depends on IP_NF_IPTABLES
+	default m if NETFILTER_ADVANCED=n
 	help
 	  Packet filtering defines a table `filter', which has a series of
 	  rules for simple packet filtering at local input, forwarding and
@@ -126,6 +136,7 @@ config IP_NF_FILTER
 config IP_NF_TARGET_REJECT
 	tristate "REJECT target support"
 	depends on IP_NF_FILTER
+	default m if NETFILTER_ADVANCED=n
 	help
 	  The REJECT target allows a filtering rule to specify that an ICMP
 	  error should be issued in response to an incoming packet, rather
@@ -136,6 +147,7 @@ config IP_NF_TARGET_REJECT
 config IP_NF_TARGET_LOG
 	tristate "LOG target support"
 	depends on IP_NF_IPTABLES
+	default m if NETFILTER_ADVANCED=n
 	help
 	  This option adds a `LOG' target, which allows you to create rules in
 	  any iptables table which records the packet header to the syslog.
@@ -145,6 +157,7 @@ config IP_NF_TARGET_LOG
 config IP_NF_TARGET_ULOG
 	tristate "ULOG target support"
 	depends on IP_NF_IPTABLES
+	default m if NETFILTER_ADVANCED=n
 	---help---
 
 	  This option enables the old IPv4-only "ipt_ULOG" implementation
@@ -165,6 +178,7 @@ config IP_NF_TARGET_ULOG
 config NF_NAT
 	tristate "Full NAT"
 	depends on IP_NF_IPTABLES && NF_CONNTRACK_IPV4
+	default m if NETFILTER_ADVANCED=n
 	help
 	  The Full NAT option allows masquerading, port forwarding and other
 	  forms of full Network Address Port Translation.  It is controlled by
@@ -180,6 +194,7 @@ config NF_NAT_NEEDED
 config IP_NF_TARGET_MASQUERADE
 	tristate "MASQUERADE target support"
 	depends on NF_NAT
+	default m if NETFILTER_ADVANCED=n
 	help
 	  Masquerading is a special case of NAT: all outgoing connections are
 	  changed to seem to come from a particular interface's address, and
@@ -192,6 +207,7 @@ config IP_NF_TARGET_MASQUERADE
 config IP_NF_TARGET_REDIRECT
 	tristate "REDIRECT target support"
 	depends on NF_NAT
+	depends on NETFILTER_ADVANCED
 	help
 	  REDIRECT is a special case of NAT: all incoming connections are
 	  mapped onto the incoming interface's address, causing the packets to
@@ -203,6 +219,7 @@ config IP_NF_TARGET_REDIRECT
 config IP_NF_TARGET_NETMAP
 	tristate "NETMAP target support"
 	depends on NF_NAT
+	depends on NETFILTER_ADVANCED
 	help
 	  NETMAP is an implementation of static 1:1 NAT mapping of network
 	  addresses. It maps the network address part, while keeping the host
@@ -214,6 +231,7 @@ config IP_NF_TARGET_NETMAP
 config NF_NAT_SNMP_BASIC
 	tristate "Basic SNMP-ALG support (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && NF_NAT
+	depends on NETFILTER_ADVANCED
 	---help---
 
 	  This module implements an Application Layer Gateway (ALG) for
@@ -277,6 +295,7 @@ config NF_NAT_SIP
 config IP_NF_MANGLE
 	tristate "Packet mangling"
 	depends on IP_NF_IPTABLES
+	default m if NETFILTER_ADVANCED=n
 	help
 	  This option adds a `mangle' table to iptables: see the man page for
 	  iptables(8).  This table is used for various packet alterations
@@ -287,6 +306,7 @@ config IP_NF_MANGLE
 config IP_NF_TARGET_ECN
 	tristate "ECN target support"
 	depends on IP_NF_MANGLE
+	depends on NETFILTER_ADVANCED
 	---help---
 	  This option adds a `ECN' target, which can be used in the iptables mangle
 	  table.  
@@ -301,6 +321,7 @@ config IP_NF_TARGET_ECN
 config IP_NF_TARGET_TTL
 	tristate  'TTL target support'
 	depends on IP_NF_MANGLE
+	depends on NETFILTER_ADVANCED
 	help
 	  This option adds a `TTL' target, which enables the user to modify
 	  the TTL value of the IP header.
@@ -316,6 +337,7 @@ config IP_NF_TARGET_CLUSTERIP
 	tristate "CLUSTERIP target support (EXPERIMENTAL)"
 	depends on IP_NF_MANGLE && EXPERIMENTAL
 	depends on NF_CONNTRACK_IPV4
+	depends on NETFILTER_ADVANCED
 	select NF_CONNTRACK_MARK
 	help
 	  The CLUSTERIP target allows you to build load-balancing clusters of
@@ -328,6 +350,7 @@ config IP_NF_TARGET_CLUSTERIP
 config IP_NF_RAW
 	tristate  'raw table support (required for NOTRACK/TRACE)'
 	depends on IP_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This option adds a `raw' table to iptables. This table is the very
 	  first in the netfilter framework and hooks in at the PREROUTING
@@ -340,6 +363,7 @@ config IP_NF_RAW
 config IP_NF_ARPTABLES
 	tristate "ARP tables support"
 	select NETFILTER_XTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  arptables is a general, extensible packet identification framework.
 	  The ARP packet filtering and mangling (manipulation)subsystems

net/ipv6/netfilter/Kconfig

@@ -8,6 +8,7 @@ menu "IPv6: Netfilter Configuration (EXPERIMENTAL)"
 config NF_CONNTRACK_IPV6
 	tristate "IPv6 connection tracking support (EXPERIMENTAL)"
 	depends on INET && IPV6 && EXPERIMENTAL && NF_CONNTRACK
+	default m if NETFILTER_ADVANCED=n
 	---help---
 	  Connection tracking keeps a record of what packets have passed
 	  through your machine, in order to figure out how they are related
@@ -22,6 +23,7 @@ config NF_CONNTRACK_IPV6
 config IP6_NF_QUEUE
 	tristate "IP6 Userspace queueing via NETLINK (OBSOLETE)"
 	depends on INET && IPV6 && NETFILTER && EXPERIMENTAL
+	depends on NETFILTER_ADVANCED
 	---help---
 
 	  This option adds a queue handler to the kernel for IPv6
@@ -44,6 +46,7 @@ config IP6_NF_IPTABLES
 	tristate "IP6 tables support (required for filtering)"
 	depends on INET && IPV6 && EXPERIMENTAL
 	select NETFILTER_XTABLES
+	default m if NETFILTER_ADVANCED=n
 	help
 	  ip6tables is a general, extensible packet identification framework.
 	  Currently only the packet filtering and packet mangling subsystem
@@ -56,6 +59,7 @@ config IP6_NF_IPTABLES
 config IP6_NF_MATCH_RT
 	tristate '"rt" Routing header match support'
 	depends on IP6_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  rt matching allows you to match packets based on the routing
 	  header of the packet.
@@ -65,6 +69,7 @@ config IP6_NF_MATCH_RT
 config IP6_NF_MATCH_OPTS
 	tristate '"hopbyhop" and "dst" opts header match support'
 	depends on IP6_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This allows one to match packets based on the hop-by-hop
 	  and destination options headers of a packet.
@@ -74,6 +79,7 @@ config IP6_NF_MATCH_OPTS
 config IP6_NF_MATCH_FRAG
 	tristate '"frag" Fragmentation header match support'
 	depends on IP6_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  frag matching allows you to match packets based on the fragmentation
 	  header of the packet.
@@ -83,6 +89,7 @@ config IP6_NF_MATCH_FRAG
 config IP6_NF_MATCH_HL
 	tristate '"hl" match support'
 	depends on IP6_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  HL matching allows you to match packets based on the hop
 	  limit of the packet.
@@ -92,6 +99,7 @@ config IP6_NF_MATCH_HL
 config IP6_NF_MATCH_IPV6HEADER
 	tristate '"ipv6header" IPv6 Extension Headers Match'
 	depends on IP6_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This module allows one to match packets based upon
 	  the ipv6 extension headers.
@@ -101,6 +109,7 @@ config IP6_NF_MATCH_IPV6HEADER
 config IP6_NF_MATCH_AH
 	tristate '"ah" match support'
 	depends on IP6_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This module allows one to match AH packets.
 
@@ -109,6 +118,7 @@ config IP6_NF_MATCH_AH
 config IP6_NF_MATCH_MH
 	tristate '"mh" match support'
 	depends on IP6_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This module allows one to match MH packets.
 
@@ -117,6 +127,7 @@ config IP6_NF_MATCH_MH
 config IP6_NF_MATCH_EUI64
 	tristate '"eui64" address check'
 	depends on IP6_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This module performs checking on the IPv6 source address
 	  Compares the last 64 bits with the EUI64 (delivered
@@ -128,6 +139,7 @@ config IP6_NF_MATCH_EUI64
 config IP6_NF_FILTER
 	tristate "Packet filtering"
 	depends on IP6_NF_IPTABLES
+	default m if NETFILTER_ADVANCED=n
 	help
 	  Packet filtering defines a table `filter', which has a series of
 	  rules for simple packet filtering at local input, forwarding and
@@ -138,6 +150,7 @@ config IP6_NF_FILTER
 config IP6_NF_TARGET_LOG
 	tristate "LOG target support"
 	depends on IP6_NF_FILTER
+	default m if NETFILTER_ADVANCED=n
 	help
 	  This option adds a `LOG' target, which allows you to create rules in
 	  any iptables table which records the packet header to the syslog.
@@ -147,6 +160,7 @@ config IP6_NF_TARGET_LOG
 config IP6_NF_TARGET_REJECT
 	tristate "REJECT target support"
 	depends on IP6_NF_FILTER
+	default m if NETFILTER_ADVANCED=n
 	help
 	  The REJECT target allows a filtering rule to specify that an ICMPv6
 	  error should be issued in response to an incoming packet, rather
@@ -157,6 +171,7 @@ config IP6_NF_TARGET_REJECT
 config IP6_NF_MANGLE
 	tristate "Packet mangling"
 	depends on IP6_NF_IPTABLES
+	default m if NETFILTER_ADVANCED=n
 	help
 	  This option adds a `mangle' table to iptables: see the man page for
 	  iptables(8).  This table is used for various packet alterations
@@ -167,27 +182,29 @@ config IP6_NF_MANGLE
 config IP6_NF_TARGET_HL
 	tristate  'HL (hoplimit) target support'
 	depends on IP6_NF_MANGLE
+	depends on NETFILTER_ADVANCED
 	help
 	  This option adds a `HL' target, which enables the user to decrement
 	  the hoplimit value of the IPv6 header or set it to a given (lower)
 	  value.
-	
+
 	  While it is safe to decrement the hoplimit value, this option also
 	  enables functionality to increment and set the hoplimit value of the
 	  IPv6 header to arbitrary values.  This is EXTREMELY DANGEROUS since
 	  you can easily create immortal packets that loop forever on the
-	  network.  
+	  network.
 
 	  To compile it as a module, choose M here.  If unsure, say N.
 
 config IP6_NF_RAW
 	tristate  'raw table support (required for TRACE)'
 	depends on IP6_NF_IPTABLES
+	depends on NETFILTER_ADVANCED
 	help
 	  This option adds a `raw' table to ip6tables. This table is the very
 	  first in the netfilter framework and hooks in at the PREROUTING
 	  and OUTPUT chains.
-	
+
 	  If you want to compile it as a module, say M here and read
 	  <file:Documentation/kbuild/modules.txt>.  If unsure, say `N'.