Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Couple conflicts resolved here:

1) In the MACB driver, a bug fix to properly initialize the
   RX tail pointer properly overlapped with some changes
   to support variable sized rings.

2) In XGBE we had a "CONFIG_PM" --> "CONFIG_PM_SLEEP" fix
   overlapping with a reorganization of the driver to support
   ACPI, OF, as well as PCI variants of the chip.

3) In 'net' we had several probe error path bug fixes to the
   stmmac driver, meanwhile a lot of this code was cleaned up
   and reorganized in 'net-next'.

4) The cls_flower classifier obtained a helper function in
   'net-next' called __fl_delete() and this overlapped with
   Daniel Borkamann's bug fix to use RCU for object destruction
   in 'net'.  It also overlapped with Jiri's change to guard
   the rhashtable_remove_fast() call with a check against
   tc_skip_sw().

5) In mlx4, a revert bug fix in 'net' overlapped with some
   unrelated changes in 'net-next'.

6) In geneve, a stale header pointer after pskb_expand_head()
   bug fix in 'net' overlapped with a large reorganization of
   the same code in 'net-next'.  Since the 'net-next' code no
   longer had the bug in question, there was nothing to do
   other than to simply take the 'net-next' hunks.

Signed-off-by: David S. Miller <davem@davemloft.net>

CREDITS

@@ -9,7 +9,7 @@
 			Linus
 ----------
 
-M: Matt Mackal
+N: Matt Mackal
 E: mpm@selenic.com
 D: SLOB slab allocator
 
@@ -1910,7 +1910,7 @@ S: Ra'annana, Israel
 
 N: Andi Kleen
 E: andi@firstfloor.org
-U: http://www.halobates.de
+W: http://www.halobates.de
 D: network, x86, NUMA, various hacks
 S: Schwalbenstr. 96
 S: 85551 Ottobrunn
@@ -2089,8 +2089,8 @@ D: ST Microelectronics SPEAr13xx PCI host bridge driver
 D: Synopsys Designware PCI host bridge driver
 
 N: Gabor Kuti
-M: seasons@falcon.sch.bme.hu
-M: seasons@makosteszta.sote.hu
+E: seasons@falcon.sch.bme.hu
+E: seasons@makosteszta.sote.hu
 D: Original author of software suspend
 
 N: Jaroslav Kysela

Documentation/devicetree/bindings/net/ethernet.txt

@@ -9,10 +9,26 @@ The following properties are common to the Ethernet controllers:
 - max-speed: number, specifies maximum speed in Mbit/s supported by the device;
 - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than
   the maximum frame size (there's contradiction in ePAPR).
-- phy-mode: string, operation mode of the PHY interface; supported values are
-  "mii", "gmii", "sgmii", "qsgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id",
-  "rgmii-rxid", "rgmii-txid", "rtbi", "smii", "xgmii", "trgmii"; this is now a
-  de-facto standard property;
+- phy-mode: string, operation mode of the PHY interface. This is now a de-facto
+  standard property; supported values are:
+  * "mii"
+  * "gmii"
+  * "sgmii"
+  * "qsgmii"
+  * "tbi"
+  * "rev-mii"
+  * "rmii"
+  * "rgmii" (RX and TX delays are added by the MAC when required)
+  * "rgmii-id" (RGMII with internal RX and TX delays provided by the PHY, the
+     MAC should not add the RX or TX delays in this case)
+  * "rgmii-rxid" (RGMII with internal RX delay provided by the PHY, the MAC
+     should not add an RX delay in this case)
+  * "rgmii-txid" (RGMII with internal TX delay provided by the PHY, the MAC
+     should not add an TX delay in this case)
+  * "rtbi"
+  * "smii"
+  * "xgmii"
+  * "trgmii"
 - phy-connection-type: the same as "phy-mode" property but described in ePAPR;
 - phy-handle: phandle, specifies a reference to a node representing a PHY
   device; this property is described in ePAPR and so preferred;

Documentation/networking/nf_conntrack-sysctl.txt

@@ -62,10 +62,13 @@ nf_conntrack_generic_timeout - INTEGER (seconds)
 	protocols.
 
 nf_conntrack_helper - BOOLEAN
-	0 - disabled
-	not 0 - enabled (default)
+	0 - disabled (default)
+	not 0 - enabled
 
 	Enable automatic conntrack helper assignment.
+	If disabled it is required to set up iptables rules to assign
+	helpers to connections.  See the CT target description in the
+	iptables-extensions(8) man page for further information.
 
 nf_conntrack_icmp_timeout - INTEGER (seconds)
 	default 30

MAINTAINERS

@@ -9260,11 +9260,12 @@ S:	Maintained
 F:	drivers/pci/host/*layerscape*
 
 PCI DRIVER FOR IMX6
-M:	Richard Zhu <Richard.Zhu@freescale.com>
+M:	Richard Zhu <hongxing.zhu@nxp.com>
 M:	Lucas Stach <l.stach@pengutronix.de>
 L:	linux-pci@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+F:	Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
 F:	drivers/pci/host/*imx6*
 
 PCI DRIVER FOR TI KEYSTONE
@@ -9323,17 +9324,11 @@ F:	drivers/pci/host/pci-exynos.c
 
 PCI DRIVER FOR SYNOPSIS DESIGNWARE
 M:	Jingoo Han <jingoohan1@gmail.com>
-M:	Pratyush Anand <pratyush.anand@gmail.com>
-L:	linux-pci@vger.kernel.org
-S:	Maintained
-F:	drivers/pci/host/*designware*
-
-PCI DRIVER FOR SYNOPSYS PROTOTYPING DEVICE
-M:	Jose Abreu <Jose.Abreu@synopsys.com>
+M:	Joao Pinto <Joao.Pinto@synopsys.com>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/designware-pcie.txt
-F:	drivers/pci/host/pcie-designware-plat.c
+F:	drivers/pci/host/*designware*
 
 PCI DRIVER FOR GENERIC OF HOSTS
 M:	Will Deacon <will.deacon@arm.com>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 9
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Psychotic Stoned Sheep
 
 # *DOCUMENTATION*
@@ -1019,8 +1019,6 @@ prepare2: prepare3 prepare-compiler-check outputmakefile asm-generic
 prepare1: prepare2 $(version_h) include/generated/utsrelease.h \
                    include/config/auto.conf
 	$(cmd_crmodverdir)
-	$(Q)test -e include/generated/autoksyms.h || \
-	    touch   include/generated/autoksyms.h
 
 archprepare: archheaders archscripts prepare1 scripts_basic
 

arch/arc/include/asm/delay.h

@@ -22,10 +22,11 @@
 static inline void __delay(unsigned long loops)
 {
 	__asm__ __volatile__(
-	"	lp  1f	\n"
-	"	nop	\n"
-	"1:		\n"
-	: "+l"(loops));
+	"	mov lp_count, %0	\n"
+	"	lp  1f			\n"
+	"	nop			\n"
+	"1:				\n"
+	: : "r"(loops));
 }
 
 extern void __bad_udelay(void);

arch/arc/include/asm/pgtable.h

@@ -280,7 +280,7 @@ static inline void pmd_set(pmd_t *pmdp, pte_t *ptep)
 
 #define pte_page(pte)		pfn_to_page(pte_pfn(pte))
 #define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
-#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pte(pfn, prot)	__pte(__pfn_to_phys(pfn) | pgprot_val(prot))
 
 /* Don't use virt_to_pfn for macros below: could cause truncations for PAE40*/
 #define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)

arch/arc/mm/cache.c

@@ -23,7 +23,7 @@
 
 static int l2_line_sz;
 static int ioc_exists;
-int slc_enable = 1, ioc_enable = 1;
+int slc_enable = 1, ioc_enable = 0;
 unsigned long perip_base = ARC_UNCACHED_ADDR_SPACE; /* legacy value for boot */
 unsigned long perip_end = 0xFFFFFFFF; /* legacy value */
 

arch/arm/boot/dts/Makefile

@@ -745,7 +745,6 @@ dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-pcduino2.dtb \
 	sun4i-a10-pov-protab2-ips9.dtb
 dtb-$(CONFIG_MACH_SUN5I) += \
-	ntc-gr8-evb.dtb \
 	sun5i-a10s-auxtek-t003.dtb \
 	sun5i-a10s-auxtek-t004.dtb \
 	sun5i-a10s-mk802.dtb \
@@ -761,6 +760,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \
 	sun5i-a13-olinuxino-micro.dtb \
 	sun5i-a13-q8-tablet.dtb \
 	sun5i-a13-utoo-p66.dtb \
+	sun5i-gr8-evb.dtb \
 	sun5i-r8-chip.dtb
 dtb-$(CONFIG_MACH_SUN6I) += \
 	sun6i-a31-app4-evb1.dtb \

arch/arm/boot/dts/stih407-family.dtsi

@@ -283,6 +283,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};
@@ -296,6 +298,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};
@@ -309,6 +313,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c2_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};
@@ -322,6 +328,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};
@@ -335,6 +343,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c4_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};
@@ -348,6 +358,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c5_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};
@@ -363,6 +375,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c10_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};
@@ -376,6 +390,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c11_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 		};

arch/arm/boot/dts/ntc-gr8-evb.dts → arch/arm/boot/dts/sun5i-gr8-evb.dts

@@ -44,7 +44,7 @@
  */
 
 /dts-v1/;
-#include "ntc-gr8.dtsi"
+#include "sun5i-gr8.dtsi"
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>

arch/arm64/boot/dts/arm/juno-base.dtsi

@@ -393,7 +393,7 @@
 		#address-cells = <3>;
 		#size-cells = <2>;
 		dma-coherent;
-		ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>,
+		ranges = <0x01000000 0x00 0x00000000 0x00 0x5f800000 0x0 0x00800000>,
 			 <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>,
 			 <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
 		#interrupt-cells = <1>;

arch/arm64/boot/dts/arm/juno-r1.dts

@@ -76,7 +76,7 @@
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x1010000>;
 				local-timer-stop;
-				entry-latency-us = <300>;
+				entry-latency-us = <400>;
 				exit-latency-us = <1200>;
 				min-residency-us = <2500>;
 			};

arch/arm64/boot/dts/arm/juno-r2.dts

@@ -76,7 +76,7 @@
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x1010000>;
 				local-timer-stop;
-				entry-latency-us = <300>;
+				entry-latency-us = <400>;
 				exit-latency-us = <1200>;
 				min-residency-us = <2500>;
 			};

arch/arm64/boot/dts/arm/juno.dts

@@ -76,7 +76,7 @@
 				compatible = "arm,idle-state";
 				arm,psci-suspend-param = <0x1010000>;
 				local-timer-stop;
-				entry-latency-us = <300>;
+				entry-latency-us = <400>;
 				exit-latency-us = <1200>;
 				min-residency-us = <2500>;
 			};

arch/mips/include/asm/mipsregs.h

@@ -214,6 +214,12 @@
 #error Bad page size configuration for hugetlbfs!
 #endif
 
+/*
+ * Wired register bits
+ */
+#define MIPSR6_WIRED_LIMIT	(_ULCAST_(0xffff) << 16)
+#define MIPSR6_WIRED_WIRED	(_ULCAST_(0xffff) << 0)
+
 /*
  * Values used for computation of new tlb entries
  */

arch/mips/include/asm/tlb.h

@@ -1,6 +1,9 @@
 #ifndef __ASM_TLB_H
 #define __ASM_TLB_H
 
+#include <asm/cpu-features.h>
+#include <asm/mipsregs.h>
+
 /*
  * MIPS doesn't need any special per-pte or per-vma handling, except
  * we need to flush cache for area to be unmapped.
@@ -22,6 +25,16 @@
 		((CKSEG0 + ((idx) << (PAGE_SHIFT + 1))) |		\
 		 (cpu_has_tlbinv ? MIPS_ENTRYHI_EHINV : 0))
 
+static inline unsigned int num_wired_entries(void)
+{
+	unsigned int wired = read_c0_wired();
+
+	if (cpu_has_mips_r6)
+		wired &= MIPSR6_WIRED_WIRED;
+
+	return wired;
+}
+
 #include <asm-generic/tlb.h>
 
 #endif /* __ASM_TLB_H */

arch/mips/mm/fault.c

@@ -209,17 +209,18 @@ static void __kprobes __do_page_fault(struct pt_regs *regs, unsigned long write,
 		if (show_unhandled_signals &&
 		    unhandled_signal(tsk, SIGSEGV) &&
 		    __ratelimit(&ratelimit_state)) {
-			pr_info("\ndo_page_fault(): sending SIGSEGV to %s for invalid %s %0*lx",
+			pr_info("do_page_fault(): sending SIGSEGV to %s for invalid %s %0*lx\n",
 				tsk->comm,
 				write ? "write access to" : "read access from",
 				field, address);
 			pr_info("epc = %0*lx in", field,
 				(unsigned long) regs->cp0_epc);
-			print_vma_addr(" ", regs->cp0_epc);
+			print_vma_addr(KERN_CONT " ", regs->cp0_epc);
+			pr_cont("\n");
 			pr_info("ra  = %0*lx in", field,
 				(unsigned long) regs->regs[31]);
-			print_vma_addr(" ", regs->regs[31]);
-			pr_info("\n");
+			print_vma_addr(KERN_CONT " ", regs->regs[31]);
+			pr_cont("\n");
 		}
 		current->thread.trap_nr = (regs->cp0_cause >> 2) & 0x1f;
 		info.si_signo = SIGSEGV;

arch/mips/mm/init.c

@@ -118,7 +118,7 @@ static void *__kmap_pgprot(struct page *page, unsigned long addr, pgprot_t prot)
 		writex_c0_entrylo1(entrylo);
 	}
 #endif
-	tlbidx = read_c0_wired();
+	tlbidx = num_wired_entries();
 	write_c0_wired(tlbidx + 1);
 	write_c0_index(tlbidx);
 	mtc0_tlbw_hazard();
@@ -147,7 +147,7 @@ void kunmap_coherent(void)
 
 	local_irq_save(flags);
 	old_ctx = read_c0_entryhi();
-	wired = read_c0_wired() - 1;
+	wired = num_wired_entries() - 1;
 	write_c0_wired(wired);
 	write_c0_index(wired);
 	write_c0_entryhi(UNIQUE_ENTRYHI(wired));