Catchment Modelling Framework, a hydrologic modelling toolbox

Vitens IPHREEQC Adaptation, allowing for more direct access to the Phreeqc calculation engine

projet de réseaux de capteurs, communication à distance, big data, communication full duplex

The output voltage of the sensor is converted by ADC to obtain the ph value.

IPH-ECO water quality model GUI

water quality monitoring system arduino project for monitoring water sources.

[Journal of Healthcare Engineering'22] IoT-Based Water Quality Assessment System for Industrial Waste WaterHealthcare Perspective

The project uses IoT to assess water quality efficiently. A device with GPS collects data from sensors for pH, TDS, temperature, and turbidity. WQI is calculated using Horton's method. Real-time data is sent to ThingSpeak, analyzed in BigQuery, and presented through customized dashboards. WQI predictions are made using BigQuery's ML model.

This project was presented at the AWS Impact Plus Hackathon held at Strathmore University. The project was aimed at Water Conservation to counter the effect of Climate change.

Open-Source Turbidity Meter and Mobile App

medidor de calidad del agua

This project is a low-cost CO₂ automation system for an aquarium.

Материалы проекта по разработке модуля исследования воды

A device that allows you to accurately record ground water temperature using the ESP32S2.

EDP_Project(Engineering Design and Fabrication Project) in sem5 and sem6

A low-cost, automated water sampler (LCS) with Internet of Things (IoT) technology for scalable, near-real-time water quality research developed by the Colorado State University Agricultural Water Quality Program

Underwater stations to monitor the quality of water in rivers and lakes. OpenScience Hub project: https://oshub.network/local_OSHub_CH.html Balise Qualite de l'Eau Developped at fablab On l'fait by Centre de Formation Professionnelle et Technique (CFPT electroonique) et Centre de formation pré-professionnelle (CFPP)

Precise Irrigation and Smart Water Resources Management