ve-direct

Read VE.direct data from Victron Solar Chargers

VEDirect data reader via serial USB for MPPT devices

ROS package for MPPT devices

.NET Standard implementation of the protocols (Text and Hex) used by Victron Solar Charge Controllers (BlueSolar/SmartSolar) + Adapter to write streaming data from a Victron solar charge controller to InfluxDB.

🔋⚡ Professional LOAD OUTPUT monitoring for Victron MPPT solar chargers - Real-time kWh tracking of load consumption with ESP82XX + ioBroker + MQTT

Real-time solar charge controller stats using VE.Direct protocol and websockets

Node-RED edge collector for Victron SmartSolar MPPT via VE.Direct USB. Raspberry Pi + InfluxDB with automatic replication to VPS.

Read Victron device settings over BLE GATT (unofficial, not affiliated with Victron Energy)

BLE GATT monitor for the Victron Blue Smart IP65 charger on a Raspberry Pi, posting to openHAB: state, voltage, current, yield, and clamp-on-battery detection - incl. the charge-preset write (0xEDF1) found with an Android HCI snoop of VictronConnect, which proves the clamps on a full battery.

Parses VE-Direct data from Victron MPPT controllers and displays information in a GUI

Monitor Renogy (BT-1/BT-TH over Bluetooth, Modbus-over-BLE) and Victron (SmartShunt, SmartSolar MPPT, VE.Direct) solar & battery gear, exporting to Prometheus and InfluxDB. A modern replacement for the unmaintained gatt-based solar-bt-monitor.