rf433mhz

esphome component for a tuya rf and ir bridge

Node Red nodes for Energenie ENER314-RT Raspberry Pi board

How to control RF 433Hz Outlet switches with Harmony Hub

Home Assistant smart doorbell sensor for 433Mhz wireless doorbell

This Homebridge plug-in transforms standard remote-controlled lights to smart lights with Python scripts.

This is a simple project with arduino unor3

Replace your ACM-125C-1 RF433 remote to control pool lights (skimmer or return jet) using ESPHome. This project transmits the RF signals captured from the original remote, allowing integration with Home Assistant.

Home Assistant custom integration to control your RF pool lights (replaces the ACM-125C-1 RF Remote)

Aggregates multiple RFLink devices (433MHz & 868MHz) from across your home into a single TCP stream — letting Home Assistant connect to all your RF sensors through one unified endpoint. Runs on a Raspberry Pi Zero W.

Receive and transmit protocol used by Dooya tubular motors

Home alarm system based on raspberry hardware

Learn and decode RF433 remote button codes using STX882 transmitter; capture, analyze & use commands for DIY home automation.

iOS client for configuring alarm system

Using RF433MHz Transmitter and Receiver, the system can detect if the person wears helmet or not with the help of Pulse Sensor or a Limit Switch. Till the person wears helmet, the bike can start/stop. If the person removes helmet for more than 5 seconds, the key access will get disconnected.

An implementation of secure communication through RF modules, using a cryptography library and a message exchange library.

emulate Oregon V1 RF433 sensor on ESP8266/ESP32 to transmit temperature reading received via MQTT

ESP32 RainMaker firmware to control 4-relay devices via app, RF433 remote, and physical buttons (ideal for roller doors/garage).

RF light switch controller

Smart accident detection with STM32F4, Bluetooth, and LCD for instant alerts.