This example demonstrates how to use the protection units to isolate the CM0+ from CM4.

This example demonstrates the fault handling functionality of PSoC 6 MCU using Peripheral Driver Library (PDL) System Library (SysLib) and ModusToolbox integrated development environment (IDE).

This example uses a SPI resource and Smart I/O in PSoC 6 MCU to implement the Serial General Purpose Input/Output (SGPIO) Target interface, which is a four-signal bus defined in the SFF-8485 standard. Another SPI resource is used to implement the SGPIO Initiator, which drives the clock on the SGPIO bus.

This community code example (CCE) demonstrates the implementation of LTE CAT M1 connectivity to PSoC6 via Point-to-Point Protocol (PPP). This CCE demonstrates the steps to add LTE connectivity to any existing Wi-Fi based code example. mtb-example-anycloud-mqtt-client is taken as a reference here. GM01Q_Sequans Module is used for providing LTE co…

mtb-example-lz4-demo

Deprecated. Use https://github.com/Infineon/mtb-example-usb-device-msc-filesystem-freertos. This example demonstrates how to configure the USB block in a PSoC 6 MCU device as a Mass Storage (MSC) device and run a file system (FatFs) through an external memory (microSD). This example uses FreeRTOS.

Deprecated. Use https://github.com/Infineon/mtb-example-usb-device-hid-mouse. This example demonstrates how to configure the USB block in a PSoC 6 MCU as a Human Interface Device (HID). The device enumerates as a 3-button mouse.

Deprecated. Use https://github.com/Infineon/mtb-example-usb-device-hid-generic. This example demonstrates how to configure the USB block in a PSoC 6 MCU as a Human Interface Device (HID). The device enumerates as a Generic HID device.

Deprecated. Use https://github.com/Infineon/mtb-example-usb-device-suspend. This example demonstrates how PSoC 6 MCU detects a USB suspend condition, enters a low power state, and restores normal operation when USB activity resumes.

This example demonstrates how to configure the USB block as a Human Interface Device (HID). The device enumerates as a generic HID device.

This example demonstrates the UART transmit and receive operation using DMA in PSoC 6 MCU.

This repository is deprecated. Use the ModusToolbox™ example available here - https://github.com/Infineon/mtb-example-usb-device-audio-recorder-freertos. This example demonstrates the use of PSoC 6 MCU to implement an audio recorder using the USB Audio Device Class.

mtb-example-usb-device-hid-mouse

This example demonstrates how to use the I2S hardware block in PSoC 6 MCU to interface with an audio codec.

This example demonstrates how to transition PSoC 6 MCU to the following power modes - Low Power Active, Low Power Sleep, Ultra Low Power Active, Ultra Low Power Sleep, and Deep Sleep.

mtb-example-usb-host-cdc-echo

This example demonstrates interfacing with an external NOR flash memory in Quad-SPI mode using the Serial Memory Interface (SMIF) block in PSoC® 6 MCU. This example uses the Serial Flash Discoverable Parameters (SFDP) standard to auto-discover the flash parameters and the commands for read, program, and erase operations.

This code example demonstrates displaying 2D graphics on an OLED display using EmWin graphics library.