supported functions

OVC3860(*wareSerial *ser, uint8_t resetPin) // constructor,1st parameter is pointer to serial device (HW,SW), 2nd is pin connected to reset pin of module

~OVC3860() //desctructor

begin(uint32_t baudrate = 115200); //parameter baudrate is communication speed between MCU and arduino, default 115200

sendData(String cmd); //construct string of AT+cmd and send it to serial port

getNextEventFromBT(); //parse data send from module and set internal variales, call this periodicaly, to parse data received from module ASAP

sendRawData(uint8_t _size, uint8_t data[]); //send data[] to serial port

pairingInit(); //initialize pairing mode

pairingExit(); //exit pairing mode

connectHSHF(); //conect to handsfreedevice

disconnectHSHF(); //disconnect handsfree, but it leave A2DP connected

callAnswer(); //accept incomming call

callReject(); //reject incomming call

callHangUp(); //hang up call

callRedial(); //Redial the last outgoing call

voiceDialStart(); //Voice dialing

voiceDialEnd(); //cancel the voice dialing

micToggle(); //Mute/Unmute MIC

transferAudio(); //Transfer audio between HSHF and phone speaker

callReleaseReject(); //causes the module to release held call, and reject waiting call.

callReleaseAccept(); //causes the module to release active call, accept other call.

callHoldAccept(); //causes the module to hold active call, accept other call.

callConference(); //causes the module to make a conference call

pairingDeleteThenInit(); //delete current pairing and then initialize pairing mode

callDialNumber(String number); //causes the module to dial number

sendDTMF(char c); //causes the module to send one DTMF characeter c, supported: 0-9, #, *, A-D

queryHFPStatus(); //queries the module’s HFP current status

reset(); //software reset module

musicTogglePlayPause(); //If the module is connected with a AV Source, this command causes the AV source to play/pause music. If module isn’t connected AV source, this command will cause module try to connected
  current connected mobile’s AV source.

musicStop(); //If the module is connected with a AV Source, this command causes the AV Source to Stop Music.

musicNextTrack(); //If the module is connected with a AV Source, this command causes the AV Source to Play next song.

musicPreviousTrack(); //If the module is connected with a AV Source, this command causes the AV Source to play last song.

queryConfiguration(); //query audo connect and auto answare configuration

autoconnEnable(); //configure auto connect feature to be enabled 

autoconnDisable(); //configure auto connect feature to be disabled

connectA2DP(); //connect A2DP/ Media audio

disconnectA2DP(); //disconnect A2DP / media audio

changeLocalName(String name = ""); //without parameter module should return actual name, did not work for me

changePin(String pin = ""); //without parameter module should return actual pin, did not work for me

queryAvrcpStatus();  //queries the module’s AVRCP current status

autoAnswerEnable(); //configure auto answer call feature to be enabled 

autoAnswerDisable(); //configure auto answer call feature to be disabled 

musicStartFF(); //If the module is connected with a AV Source, this command causes the AV Source to start fast forward.

musicStartRWD(); //If the module is connected with a AV Source, this command causes the AV Source to start rewind.

musicStopFFRWD(); //If the module is connected with a AV Source, this command causes the AV Source to stop fast forward or rewind.

queryA2DPStatus(); //queries the module’s A2DP current status

writeToMemory(String data); //This command causes the module to write a byte into a given memory address.

readFromMemory(String addr); //This command causes the module to read a byte from a given memory address.

switchDevices(); //causes the module to switch two remote devices

queryVersion(); //queries the module’s software version

pbSyncBySim(); //causes the module to synchronize the phonebook which is stored by SIM

pbSyncByPhone(); //causes the module to synchronize the phonebook which is stored by phone

pbReadNextItem(); //causes the module to read next one phonebook item from phone or local

pbReadPreviousItem(); //causes the module to read previous one phonebook item from phone or local

pbSyncByDialer(); //causes the module to synchronize the dialed calls list

pbSyncByReceiver(); //causes the module to synchronize the received calls list

pbSyncByMissed(); causes the module to synchronize the missed calls list

pbSyncByLastCall(); //causes the module to synchronize the last call list

getLocalLastDialedList(); //causes the module to read one of recently dialed call number(record by module)

getLocalLastReceivedList(); //causes the module to read one of recently received call number(record by module)

getLocalLastMissedList(); //causes the module to read one of recently missed call number(record by module)

dialLastReceivedCall(); //causes the module to dial last received phone number

clearLocalCallHistory(); //causes the module to clear call history(record by module)

sppDataTransmit(); //send SPP data to the remote device

setClockdebugMode(); //causes the module to enter clock debug mode

volumeDown(); //causes the module to decrease the speaker volume

enterTestMode(); //not usefull for normal user

setFixedFrequency(); //not usefull for normal user

emcTestMode(); //not usefull for normal user

setRFRegister(); //not usefull for normal user

inquiryStart(); //causes the module to inquiry Bluetooth devices

inquiryStop();  //causes the module to cancel inquiry Bluetooth devices

volumeUp(); //causes the module to increase the speaker volume

shutdown(); //shutdown module, need to be power cycled to start again, HW reset did not work

enterConfigMode(); //reset module (hw way) and enable pskey configuration mode 

quitConfigMode(); //disable pskey configuration mode

readName(); //read name of module in configuration mode

writeName(String NewName); //write name of module in configuration mode

readAllPSK(); //read all pskeys - did not work for me right now, also using pskey config app did not work for this.

readPin(); //read pin of module in configuration mode

writePin(String NewPin); //write pin of module in configuration mode
 
readBaudRate(); //read baudrate of module in configuration mode - did not work for me right now, also using pskey config app did not work for this. 

writeBaudRate(uint8_t NewBaudRate = OVC3860_BAUDRATE_115200); //write baudrate of module in configuration mode - did not work for me right now, also using pskey config app did not work for this.

readSysBTMode(); //read bluetooth mode 

writeSysBTMode(uint8_t mode); //write bluetooth mode, 00-UART,03-HEADSET,04-CARKIT,06-AVSINK,09-MOBILE

readClassOfDevice(); // read class of device

writeClassOfDevice(); // write class of device

readBTAddress(); //read bluetooth address of module

resetModule();//reset module HW way = puting reset pin low and then high

/*
 * taken from https://github.com/tomaskovacik/kicad-library/blob/master/library/datasheet/OVC3860_based_modules/BLK-MD-SPK-B_AT_Command_set_original.pdf
 * did not work on my modules, but I "implemented" it
 */

pbSyncBySim(); //causes the module to synchronize the phonebook which is stored by SIM

pbSyncByPhone(); //causes the module to synchronize the phonebook which is stored by phone

pbReadNextItem(); //causes the module to read next one phonebook item from phone or local

pbReadPreviousItem(); //causes the module to read previous one phonebook item from phone or local

pbSyncByDialer(); //causes the module to synchronize the dialed calls list

pbSyncByReceiver(); //causes the module to synchronize the received calls list

pbSyncByMissed(); causes the module to synchronize the missed calls list

pbSyncByLastCall(); //causes the module to synchronize the last call list

getLocalLastDialedList(); //causes the module to read one of recently dialed call number(record by module)

getLocalLastReceivedList(); //causes the module to read one of recently received call number(record by module)

getLocalLastMissedList(); //causes the module to read one of recently missed call number(record by module)

dialLastReceivedCall(); //causes the module to dial last received phone number

clearLocalCallHistory(); //causes the module to clear call history(record by module)