Merge with /pub/scm/linux/kernel/git/torvalds/linux-2.6.git

Signed-off-by: Steve French <sfrench@us.ibm.com>

MAINTAINERS

@@ -536,6 +536,7 @@ P:	Mauro Carvalho Chehab
 M:	mchehab@brturbo.com.br
 L:	video4linux-list@redhat.com
 W:	http://linuxtv.org
+T:	quilt http://www.linuxtv.org/download/quilt/
 S:	Maintained
 
 BUSLOGIC SCSI DRIVER
@@ -833,6 +834,7 @@ P:	LinuxTV.org Project
 M: 	linux-dvb-maintainer@linuxtv.org
 L: 	linux-dvb@linuxtv.org (subscription required)
 W:	http://linuxtv.org/
+T:	quilt http://www.linuxtv.org/download/quilt/
 S:	Supported
 
 EATA-DMA SCSI DRIVER
@@ -1634,6 +1636,15 @@ L:	ldm-devel@lists.sourceforge.net
 W:	http://ldm.sourceforge.net
 S:	Maintained
 
+LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
+P:	Eric Moore
+M:	Eric.Moore@lsil.com
+M:	support@lsil.com
+L:	mpt_linux_developer@lsil.com
+L:	linux-scsi@vger.kernel.org
+W:	http://www.lsilogic.com/support
+S:	Supported
+
 LSILOGIC/SYMBIOS/NCR 53C8XX and 53C1010 PCI-SCSI drivers
 P:	Matthew Wilcox
 M:	matthew@wil.cx
@@ -2885,6 +2896,7 @@ P:	Mauro Carvalho Chehab
 M:	mchehab@brturbo.com.br
 L:	video4linux-list@redhat.com
 W:	http://linuxtv.org
+T:	quilt http://www.linuxtv.org/download/quilt/
 S:	Maintained
 
 W1 DALLAS'S 1-WIRE BUS

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 15
-EXTRAVERSION =-rc4
+EXTRAVERSION =-rc5
 NAME=Affluent Albatross
 
 # *DOCUMENTATION*

arch/arm/configs/spitz_defconfig

@@ -897,7 +897,24 @@ CONFIG_UNIX98_PTYS=y
 #
 # I2C support
 #
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
 
 #
 # Hardware Monitoring support

arch/arm/mach-ixp4xx/ixdp425-setup.c

@@ -85,7 +85,7 @@ static struct plat_serial8250_port ixdp425_uart_data[] = {
 	{
 		.mapbase	= IXP4XX_UART2_BASE_PHYS,
 		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
+		.irq		= IRQ_IXP4XX_UART2,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,

arch/arm/mach-pxa/Kconfig

@@ -77,6 +77,8 @@ config MACH_AKITA
 	depends PXA_SHARPSL_27x
 	select PXA_SHARP_Cxx00
 	select MACH_SPITZ
+	select I2C
+	select I2C_PXA
 
 config MACH_SPITZ
 	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"

arch/arm/mm/flush.c

@@ -155,14 +155,19 @@ static void __flush_dcache_aliases(struct address_space *mapping, struct page *p
  *  space mappings, we can be lazy and remember that we may have dirty
  *  kernel cache lines for later.  Otherwise, we assume we have
  *  aliasing mappings.
+ *
+ * Note that we disable the lazy flush for SMP.
  */
 void flush_dcache_page(struct page *page)
 {
 	struct address_space *mapping = page_mapping(page);
 
+#ifndef CONFIG_SMP
 	if (mapping && !mapping_mapped(mapping))
 		set_bit(PG_dcache_dirty, &page->flags);
-	else {
+	else
+#endif
+	{
 		__flush_dcache_page(mapping, page);
 		if (mapping && cache_is_vivt())
 			__flush_dcache_aliases(mapping, page);

arch/i386/kernel/acpi/boot.c

@@ -638,6 +638,13 @@ static int __init acpi_parse_fadt(unsigned long phys, unsigned long size)
 			return 0;
 
 		pmtmr_ioport = fadt->xpm_tmr_blk.address;
+		/*
+		 * "X" fields are optional extensions to the original V1.0
+		 * fields, so we must selectively expand V1.0 fields if the
+		 * corresponding X field is zero.
+	 	 */
+		if (!pmtmr_ioport)
+			pmtmr_ioport = fadt->V1_pm_tmr_blk;
 	} else {
 		/* FADT rev. 1 */
 		pmtmr_ioport = fadt->V1_pm_tmr_blk;

arch/mips/Kconfig

@@ -6,8 +6,6 @@ config MIPS
 
 mainmenu "Linux/MIPS Kernel Configuration"
 
-source "init/Kconfig"
-
 menu "Machine selection"
 
 choice
@@ -1643,6 +1641,8 @@ config RWSEM_GENERIC_SPINLOCK
 	bool
 	default y
 
+source "init/Kconfig"
+
 menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
 
 config HW_HAS_EISA

arch/mips/au1000/db1x00/board_setup.c

@@ -45,13 +45,12 @@
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-db1x00/db1x00.h>
 
-/* not correct for db1550 */
-static BCSR * const bcsr = (BCSR *)0xAE000000;
+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
 
 void board_reset (void)
 {
 	/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
-	au_writel(0x00000000, 0xAE00001C);
+	bcsr->swreset = 0x0000;
 }
 
 void __init board_setup(void)
@@ -75,7 +74,7 @@ void __init board_setup(void)
 	bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF;
 	au_sync();
 #endif
-	au_writel(0, 0xAE000010); /* turn off pcmcia power */
+	bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */
 
 #ifdef CONFIG_MIPS_MIRAGE
 	/* enable GPIO[31:0] inputs */

arch/mips/au1000/db1x00/init.c

@@ -61,7 +61,17 @@ void __init prom_init(void)
 	prom_envp = (char **) fw_arg2;
 
 	mips_machgroup = MACH_GROUP_ALCHEMY;
-	mips_machtype = MACH_DB1000;	/* set the platform # */
+
+	/* Set the platform # */
+#if	defined (CONFIG_MIPS_DB1550)
+	mips_machtype = MACH_DB1550;
+#elif	defined (CONFIG_MIPS_DB1500)
+	mips_machtype = MACH_DB1500;
+#elif	defined (CONFIG_MIPS_DB1100)
+	mips_machtype = MACH_DB1100;
+#else
+	mips_machtype = MACH_DB1000;
+#endif
 
 	prom_init_cmdline();
 

arch/mips/configs/atlas_defconfig

@@ -1,79 +1,10 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Thu Nov 10 12:14:02 2005
+# Linux kernel version: 2.6.15-rc2
+# Thu Nov 24 01:05:52 2005
 #
 CONFIG_MIPS=y
 
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
 #
 # Machine selection
 #
@@ -214,6 +145,75 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #