0.0.7

Hardware state as ordered on 2023-09-26

Main changes:

• SMD Capacitors to reduce assembly cost

Firmware:

• ESPhome: km271-for-friends-factory.bin
• Dwenni's FW (older version): buderus_km271_esp32_flash_v3.2.4.bin
• Test FW: blinkenlights.bin

0.0.6

This is the current state, adding OneWire, I2C and SPI extension capabilities.
Additionally, it has a USB-Connector for powering the board externally.
Many Jumpers have been removed that were used during development and replaced by unpopulated resistors, if still needed.