Merge branch 'pci/controller/qcom'

- Enable MSI interrupts if 'global' IRQ is supported, since a previous
  commit unintentionally masked them (Manivannan Sadhasivam)

- Move endpoint controller cleanups that depend on refclk from the host to
  the notifier that tells us the host has deasserted PERST# (Manivannan
  Sadhasivam)

- Add DT binding and driver support for IPQ9574, with Synopsys IP v5.80a
  and Qcom IP 1.27.0 (devi priya)

- Move the OPP "operating-points-v2" table from the qcom,pcie-sm8450.yaml
  DT binding to qcom,pcie-common.yaml, where it can be used by other Qcom
  platforms (Qiang Yu)

- Add 'global' SPI interrupt for events like link-up, link-down to
  qcom,pcie-x1e80100 DT binding so we can start enumeration when the link
  comes up (Qiang Yu)

- Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned to
  support this (Qiang Yu)

- Add ops_1_21_0 for SC8280X family SoC, which doesn't use the 'iommu-map'
  DT property and doesn't need BDF-to-SID translation (Qiang Yu)

* pci/controller/qcom:
  PCI: qcom: Disable ASPM L0s for X1E80100
  PCI: qcom: Remove BDF2SID mapping config for SC8280X family SoC
  dt-bindings: PCI: qcom,pcie-x1e80100: Add 'global' interrupt
  dt-bindings: PCI: qcom: Move OPP table to qcom,pcie-common.yaml
  PCI: qcom: Add support for IPQ9574
  dt-bindings: PCI: qcom: Document the IPQ9574 PCIe controller
  PCI: qcom-ep: Move controller cleanups to qcom_pcie_perst_deassert()
  PCI: qcom: Enable MSI interrupts together with Link up if 'Global IRQ' is supported

Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml

@@ -81,6 +81,10 @@ properties:
   vddpe-3v3-supply:
     description: PCIe endpoint power supply
 
+  operating-points-v2: true
+  opp-table:
+    type: object
+
 required:
   - reg
   - reg-names

Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml

@@ -70,10 +70,6 @@ properties:
       - const: msi7
       - const: global
 
-  operating-points-v2: true
-  opp-table:
-    type: object
-
   resets:
     maxItems: 1
 

Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml

@@ -47,9 +47,10 @@ properties:
 
   interrupts:
     minItems: 8
-    maxItems: 8
+    maxItems: 9
 
   interrupt-names:
+    minItems: 8
     items:
       - const: msi0
       - const: msi1
@@ -59,6 +60,7 @@ properties:
       - const: msi5
       - const: msi6
       - const: msi7
+      - const: global
 
   resets:
     minItems: 1
@@ -130,9 +132,10 @@ examples:
                          <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
             interrupt-names = "msi0", "msi1", "msi2", "msi3",
-                              "msi4", "msi5", "msi6", "msi7";
+                              "msi4", "msi5", "msi6", "msi7", "global";
             #interrupt-cells = <1>;
             interrupt-map-mask = <0 0 0 0x7>;
             interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */

Documentation/devicetree/bindings/pci/qcom,pcie.yaml

@@ -26,6 +26,7 @@ properties:
           - qcom,pcie-ipq8064-v2
           - qcom,pcie-ipq8074
           - qcom,pcie-ipq8074-gen3
+          - qcom,pcie-ipq9574
           - qcom,pcie-msm8996
           - qcom,pcie-qcs404
           - qcom,pcie-sdm845
@@ -164,6 +165,7 @@ allOf:
             enum:
               - qcom,pcie-ipq6018
               - qcom,pcie-ipq8074-gen3
+              - qcom,pcie-ipq9574
     then:
       properties:
         reg:
@@ -400,6 +402,53 @@ allOf:
             - const: axi_m_sticky # AXI Master Sticky reset
             - const: axi_s_sticky # AXI Slave Sticky reset
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq9574
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          maxItems: 6
+        clock-names:
+          items:
+            - const: axi_m # AXI Master clock
+            - const: axi_s # AXI Slave clock
+            - const: axi_bridge
+            - const: rchng
+            - const: ahb
+            - const: aux
+
+        resets:
+          minItems: 8
+          maxItems: 8
+        reset-names:
+          items:
+            - const: pipe # PIPE reset
+            - const: sticky # Core Sticky reset
+            - const: axi_s_sticky # AXI Slave Sticky reset
+            - const: axi_s # AXI Slave reset
+            - const: axi_m_sticky # AXI Master Sticky reset
+            - const: axi_m # AXI Master reset
+            - const: aux # AUX Reset
+            - const: ahb # AHB Reset
+
+        interrupts:
+          minItems: 8
+        interrupt-names:
+          items:
+            - const: msi0
+            - const: msi1
+            - const: msi2
+            - const: msi3
+            - const: msi4
+            - const: msi5
+            - const: msi6
+            - const: msi7
+
   - if:
       properties:
         compatible:
@@ -510,6 +559,7 @@ allOf:
                 - qcom,pcie-ipq8064v2
                 - qcom,pcie-ipq8074
                 - qcom,pcie-ipq8074-gen3
+                - qcom,pcie-ipq9574
                 - qcom,pcie-qcs404
     then:
       required:

drivers/pci/controller/dwc/pcie-qcom-ep.c

@@ -396,6 +396,10 @@ static int qcom_pcie_perst_deassert(struct dw_pcie *pci)
 		return ret;
 	}
 
+	/* Perform cleanup that requires refclk */
+	pci_epc_deinit_notify(pci->ep.epc);
+	dw_pcie_ep_cleanup(&pci->ep);
+
 	/* Assert WAKE# to RC to indicate device is ready */
 	gpiod_set_value_cansleep(pcie_ep->wake, 1);
 	usleep_range(WAKE_DELAY_US, WAKE_DELAY_US + 500);
@@ -540,8 +544,6 @@ static void qcom_pcie_perst_assert(struct dw_pcie *pci)
 {
 	struct qcom_pcie_ep *pcie_ep = to_pcie_ep(pci);
 
-	pci_epc_deinit_notify(pci->ep.epc);
-	dw_pcie_ep_cleanup(&pci->ep);
 	qcom_pcie_disable_resources(pcie_ep);
 	pcie_ep->link_status = QCOM_PCIE_EP_LINK_DISABLED;
 }

drivers/pci/controller/dwc/pcie-qcom.c

@@ -133,6 +133,7 @@
 
 /* PARF_INT_ALL_{STATUS/CLEAR/MASK} register fields */
 #define PARF_INT_ALL_LINK_UP			BIT(13)
+#define PARF_INT_MSI_DEV_0_7			GENMASK(30, 23)
 
 /* PARF_NO_SNOOP_OVERIDE register fields */
 #define WR_NO_SNOOP_OVERIDE_EN			BIT(1)
@@ -1364,6 +1365,16 @@ static const struct qcom_pcie_ops ops_1_9_0 = {
 	.config_sid = qcom_pcie_config_sid_1_9_0,
 };
 
+/* Qcom IP rev.: 1.21.0  Synopsys IP rev.: 5.60a */
+static const struct qcom_pcie_ops ops_1_21_0 = {
+	.get_resources = qcom_pcie_get_resources_2_7_0,
+	.init = qcom_pcie_init_2_7_0,
+	.post_init = qcom_pcie_post_init_2_7_0,
+	.host_post_init = qcom_pcie_host_post_init_2_7_0,
+	.deinit = qcom_pcie_deinit_2_7_0,
+	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
+};
+
 /* Qcom IP rev.: 2.9.0  Synopsys IP rev.: 5.00a */
 static const struct qcom_pcie_ops ops_2_9_0 = {
 	.get_resources = qcom_pcie_get_resources_2_9_0,
@@ -1411,7 +1422,7 @@ static const struct qcom_pcie_cfg cfg_2_9_0 = {
 };
 
 static const struct qcom_pcie_cfg cfg_sc8280xp = {
-	.ops = &ops_1_9_0,
+	.ops = &ops_1_21_0,
 	.no_l0s = true,
 };
 
@@ -1716,7 +1727,8 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 			goto err_host_deinit;
 		}
 
-		writel_relaxed(PARF_INT_ALL_LINK_UP, pcie->parf + PARF_INT_ALL_MASK);
+		writel_relaxed(PARF_INT_ALL_LINK_UP | PARF_INT_MSI_DEV_0_7,
+			       pcie->parf + PARF_INT_ALL_MASK);
 	}
 
 	qcom_pcie_icc_opp_update(pcie);
@@ -1828,6 +1840,7 @@ static const struct of_device_id qcom_pcie_match[] = {
 	{ .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 },
 	{ .compatible = "qcom,pcie-ipq8074", .data = &cfg_2_3_3 },
 	{ .compatible = "qcom,pcie-ipq8074-gen3", .data = &cfg_2_9_0 },
+	{ .compatible = "qcom,pcie-ipq9574", .data = &cfg_2_9_0 },
 	{ .compatible = "qcom,pcie-msm8996", .data = &cfg_2_3_2 },
 	{ .compatible = "qcom,pcie-qcs404", .data = &cfg_2_4_0 },
 	{ .compatible = "qcom,pcie-sa8540p", .data = &cfg_sc8280xp },
@@ -1843,7 +1856,7 @@ static const struct of_device_id qcom_pcie_match[] = {
 	{ .compatible = "qcom,pcie-sm8450-pcie0", .data = &cfg_1_9_0 },
 	{ .compatible = "qcom,pcie-sm8450-pcie1", .data = &cfg_1_9_0 },
 	{ .compatible = "qcom,pcie-sm8550", .data = &cfg_1_9_0 },
-	{ .compatible = "qcom,pcie-x1e80100", .data = &cfg_1_9_0 },
+	{ .compatible = "qcom,pcie-x1e80100", .data = &cfg_sc8280xp },
 	{ }
 };