Known Issues

[tablatronix]

Wall Mount

• There are 2 intersecting holes, make sure your supports are going to come out, be conservative on the interface or type of supports
• There is only 1 mounting hole to the wall, the recess should be big enough to add a washer for strength. This was by design, as I needed them to be specific size, and there was not enough room for 2 screws, and I intended this to work at angles also. The body is wide so it does not rock on the surface, a slim alt version is provided it can be interspaced I imagine, it also allows a secondary hole for securing to rails if you need it to hold more, (untested)
• Another hole could be added behind the rail if it needed to be more secure, and not spin

Spool holder

• The spool need to be captive, I might add a hole or something that can be locked in with a pin, if the spool rotates then all the spools on it rotates, so preventing this helps things not unroll