v1.3.0

• Optima 270 - Fixed wrong alarm states
• CTS602 - Models with extraction sensors, should now use the correct sensor.
• Many internal changes in the supporting GenvexNabto libary.

v1.2.3.2

• CTS602 - Now uses T10 if T3 sensor is not available on model for extract air temperature.
• CTS602 - Should now correctly show exhaust temperature as seperate sensor. (T4)

v1.2.3.1

• CTS602 (light) - Fixes missing data requests resulting in non working installation for some devices.
• CTS602 - Switched exhaust and extract sensors around.

v1.2.3

• CTS602 light - Fixed new values not getting requested.
• CTS602 light - Corrected from dutycycle to fan speed.
• CTS602 light - Switched exhaust and extract air. Previously they were incorrect.
• CTS602 (light) - Changed inlet from T7 (After heater) to T2 (before heater)
• CTS602 (light) - Added T7 (After heater), disabled by default

v1.2.2

• CTS602light - Added CO2, Controlstate, alarms
• CTS602(light) - Add T9 heater temperature

v1.2.1.1

• Fixes missing state class for sensors introduces in v1.2.1
• Some entities now defaults to being disabled. These can be individually enabled if needed.
• CTS602 - Model name is now shown in device menu
• CTS602 - Added heatpump data for Compact P
• Optima270 - Added rotor RPM for rotating heat exchangers
• FIX - Fixed reloading not working correctly

Full Changelog: v1.2.0...v1.2.1

v1.2.1

• Some entities now defaults to being disabled. These can be individually enabled if needed.
• CTS602 - Model name is now shown in device menu
• CTS602 - Added heatpump data for Compact P
• Optima270 - Added rotor RPM for rotating heat exchangers
• FIX - Fixed reloading not working correctly

Full Changelog: v1.2.0...v1.2.1

v1.2.0

• Running multiple devices should hopefully now work correctly.
• CTS400 - Added alarm readout.
• CTS400 - Fan off now uses ventilation disable internally.
• Optima270 - Fixed filter alarm not working.
• Internal fixes, better handling of communication with device.
• Removed unused config import

v1.0.1

Fixes error in config flow when choosing a discovered device.

v1.0.0

Now supports manual IP and port entry.