-
-
Notifications
You must be signed in to change notification settings - Fork 519
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Default Fan speed ignored #3380
Comments
"Full fan speed at layer" is definitely confusing. It means, that at layer 4, this limiter will stop limiting and fan will be on its target speed. Thus:
|
What is the purpose of default fan speed then? It doesn't affect the "minimum PWM that my fan needs to work" as explained in the details. I also checked |
default fan speed is used for extrusion roles that currently don't have a fan sped override set |
. now easier to add new control and do complicate stuff in the cooling buffer. . less overall number of lines of code for better results. . add 6 new fan control. . now if the disable_fan_first_layers is at 0 and full_fan_speed_layer at more than 1, the first layer has some fan speed. . updated fan speeds that cannot be increased even with low layer time (top solid, ironing, support, support interface) . updated fan speeds that cannot be reduced by full_fan_speed_layer (bridge, infill bridge, overhangs, support interface) . updated extrusion speed that can't be reduced (overhang, bridge) . updated extrusion speed that shouldn't be reduced if possible (external, ironing, infill bridge, thin wall, support interface) . better name for CoolingBuffer::process_layer variables #3735 #3608 #3568 #3415 #3408 #3380 #3367 #3361 #3271 #3152 #2872 #2696 #2419 #2326
. now easier to add new control and do complicate stuff in the cooling buffer. . less overall number of lines of code for better results. . add 6 new fan control. . now if the disable_fan_first_layers is at 0 and full_fan_speed_layer at more than 1, the first layer has some fan speed. . updated fan speeds that cannot be increased even with low layer time (top solid, ironing, support, support interface) . updated fan speeds that cannot be reduced by full_fan_speed_layer (bridge, infill bridge, overhangs, support interface) . updated extrusion speed that can't be reduced (overhang, bridge) . updated extrusion speed that shouldn't be reduced if possible (external, ironing, infill bridge, thin wall, support interface) . better name for CoolingBuffer::process_layer variables supermerill#3735 supermerill#3608 supermerill#3568 supermerill#3415 supermerill#3408 supermerill#3380 supermerill#3367 supermerill#3361 supermerill#3271 supermerill#3152 supermerill#2872 supermerill#2696 supermerill#2419 supermerill#2326
What happened?
min_fan_speed
is set at 35%, but gcode is created starting from 0%Project file & How to reproduce
Any project behave the same.
Filament settings -> Default fan speed: 35%
Gcode Preview -> View Fan speed -> Values below default fan speed
Version
2.4.58.5
Operating system
windows 10
Printer model
No response
The text was updated successfully, but these errors were encountered: