Add support for my board XMOTO with STM8L151G4xx

boards.txt

@@ -67,6 +67,38 @@ Nucleo_8L152R8.menu.upload_method.stm8Flasher=stm8Flasher
 Nucleo_8L152R8.menu.upload_method.stm8Flasher.upload.protocol=stm8Tools
 Nucleo_8L152R8.menu.upload_method.stm8Flasher.upload.tool=stm8Flasher
 
+################################################################################
+#  STM8L151Gx
+XMOTO_8L151G4.name=XMOTO_8L151G4
+
+XMOTO_8L151G4.build.core=arduino
+XMOTO_8L151G4.build.board=XMOTO_8L151G4
+XMOTO_8L151G4.build.extra_flags=-d{build.product_line} {build.xSerial}
+
+# XMOTO_8L151G4 board
+# Support: Serial1 (USART1 on PA2, PA3)
+XMOTO_8L151G4=XMOTO_8L151G4
+XMOTO_8L151G4.device=STM8L15xG4
+XMOTO_8L151G4.node=NODE_8L151
+XMOTO_8L151G4.upload.maximum_size=32768
+XMOTO_8L151G4.upload.maximum_data_size=2048
+XMOTO_8L151G4.build.mcu=8-bit
+XMOTO_8L151G4.build.board=XMOTO_8L151G4
+XMOTO_8L151G4.build.series=STM8Lxx
+XMOTO_8L151G4.build.splibraryPrefix=_StdPeriph_Driver
+XMOTO_8L151G4.build.product_line=STM8L15X_HD
+XMOTO_8L151G4.build.variant=XMOTO_8L151G4
+XMOTO_8L151G4.build.f_cpu=16000000
+
+XMOTO_8L151G4.menu.upload_method.MassStorage=Mass Storage
+XMOTO_8L151G4.menu.upload_method.MassStorage.upload.protocol=
+XMOTO_8L151G4.menu.upload_method.MassStorage.upload.tool=massStorageCopy
+
+XMOTO_8L151G4.menu.upload_method.stm8Flasher=stm8Flasher
+XMOTO_8L151G4.menu.upload_method.stm8Flasher.upload.protocol=stm8Tools
+XMOTO_8L151G4.menu.upload_method.stm8Flasher.upload.tool=stm8Flasher
+
+
 ################################################################################
 # Serialx activation
 Nucleo_8S208RB.menu.xserial.generic=Enabled with generic Serial

variants/XMOTO_8L151G4/PeripheralPins.c

@@ -0,0 +1,158 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2018, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ * Automatically generated from STM8L152R8Tx.xml
+ */
+#include "Arduino.h"
+#include "PeripheralPins.h"
+
+/* =====
+ * Note: Commented lines are alternative possibilities which are not used per default.
+ *       If you change them, you will have to know what you do
+ * =====
+ */
+
+//*** ADC ***
+
+#if !defined(NO_HWADC)
+const PinMap PinMap_ADC[] = {
+    {PA_4,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_Mode_In_FL_No_IT, 0, 2, 0)}, // ADC1_IN2
+    {PA_5,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_Mode_In_FL_No_IT, 0, 1, 0)}, // ADC1_IN1
+    {PB_2,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_Mode_In_FL_No_IT, 0, 16, 0)}, // ADC1_IN16
+    {PB_3,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_Mode_In_FL_No_IT, 0, 15, 0)}, // ADC1_IN15
+    {PB_4,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_Mode_In_FL_No_IT, 0, 14, 0)}, // ADC1_IN14
+    {PB_5,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_Mode_In_FL_No_IT, 0, 13, 0)}, // ADC1_IN13
+    {PB_6,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_Mode_In_FL_No_IT, 0, 12, 0)}, // ADC1_IN12
+    {PB_7,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_Mode_In_FL_No_IT, 0, 11, 0)}, // ADC1_IN11
+    {PC_2,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_Mode_In_FL_No_IT, 0, 6, 0)}, // ADC1_IN6
+    {PC_3,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_Mode_In_FL_No_IT, 0, 5, 0)}, // ADC1_IN5
+    {PC_4,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_Mode_In_FL_No_IT, 0, 4, 0)}, // ADC1_IN4
+    {PC_7,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_Mode_In_FL_No_IT, 0, 3, 0)}, // ADC1_IN3
+    {PD_0,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_Mode_In_FL_No_IT, 0, 22, 0)}, // ADC1_IN22
+    {PD_1,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_Mode_In_FL_No_IT, 0, 21, 0)}, // ADC1_IN21
+    {PD_3,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_Mode_In_FL_No_IT, 0, 19, 0)}, // ADC1_IN19
+    {NC,    NP,    0}
+};
+#endif
+
+//*** DAC ***
+
+#if !defined(NO_HWDAC)
+const PinMap PinMap_DAC[] = {
+    {PB_4,  DAC, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_Mode_In_FL_No_IT, 0, 1, 0)}, // DAC_OUT
+    {NC,   NP,    0}
+};
+#endif
+
+//*** I2C ***
+
+#if !defined(NO_HWI2C)
+const PinMap PinMap_I2C_SDA[] = {
+    {PC_0,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_Mode_In_FL_No_IT, AFIO_NONE)},
+    {NC,    NP,    0}
+};
+#endif
+
+#if !defined(NO_HWI2C)
+const PinMap PinMap_I2C_SCL[] = {
+    {PC_1,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_Mode_In_FL_No_IT, AFIO_NONE)},
+    {NC,    NP,    0}
+};
+#endif
+
+//*** PWM ***
+
+#if !defined(NO_HWTIM)
+const PinMap PinMap_PWM[] = {
+    {PB_0,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_Mode_Out_PP_Low_Fast, AFIO_NONE, 1, 0)},  // TIM2_CH1
+    {PB_1,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_Mode_Out_PP_Low_Fast, AFIO_NONE, 1, 0)},  // TIM3_CH1
+    {PB_2,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_Mode_Out_PP_Low_Fast, AFIO_NONE, 2, 0)},  // TIM2_CH2
+    {PD_0,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_Mode_Out_PP_Low_Fast, AFIO_NONE, 2, 0)},  // TIM3_CH2
+    {PD_2,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_Mode_Out_PP_Low_Fast, AFIO_NONE, 1, 0)},  // TIM1_CH1
+    {PD_4,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_Mode_Out_PP_Low_Fast, AFIO_NONE, 2, 0)},  // TIM1_CH2
+    {PD_1,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_Mode_Out_PP_Low_Fast, AFIO_NONE, 3, 0)},  // TIM1_CH3
+    {PB_3,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_Mode_Out_PP_Low_Fast, AFIO_NONE, 1, 1)},  // TIM1_CH1N
+    {NC,    NP,    0}
+};
+#endif
+
+//*** SERIAL ***
+
+#if !defined(NO_HWSERIAL)
+const PinMap PinMap_UART_TX[] = {
+    {PA_2,  USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_Mode_Out_PP_Low_Fast, AFIO_USART1_PORTA_ENABLE)},
+    {NC,    NP,    0}
+};
+#endif
+
+#if !defined(NO_HWSERIAL)
+const PinMap PinMap_UART_RX[] = {
+    {PA_3,  USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_Mode_In_PU_No_IT, AFIO_USART1_PORTA_ENABLE)},
+    {NC,    NP,    0}
+};
+#endif
+
+//*** SPI ***
+
+#if !defined(NO_HWSPI)
+const PinMap PinMap_SPI_MOSI[] = {
+    {PB_6,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_Mode_In_PU_No_IT, AFIO_NONE)},
+    {NC,    NP,    0}
+};
+#endif
+
+#if !defined(NO_HWSPI)
+const PinMap PinMap_SPI_MISO[] = {
+    {PB_7,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_Mode_In_PU_No_IT, AFIO_NONE)},
+    {NC,    NP,    0}
+};
+#endif
+
+#if !defined(NO_HWSPI)
+const PinMap PinMap_SPI_SCLK[] = {
+    {PB_5,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_Mode_In_PU_No_IT, AFIO_NONE)},
+    {NC,    NP,    0}
+};
+#endif
+
+#if !defined(NO_HWSPI)
+const PinMap PinMap_SPI_SSEL[] = {
+    {PB_4,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_Mode_In_PU_No_IT, AFIO_NONE)},
+    {NC,    NP,    0}
+};
+#endif
+
+//*** CAN ***
+
+//*** No CAN_RD ***
+
+//*** No CAN_TD ***
+
+//*** QUADSPI ***
+
+//*** No QUADSPI ***

variants/XMOTO_8L151G4/lkfscript.lkf

@@ -0,0 +1,27 @@
+#	link command file for STM8S105C6
+#	Copyright (c) 2017 by COSMIC Software
+#
++seg .vector -b0x8000 -m0x8000 -n .vector -cs code -k	# interrupt and rest vectors
++seg .const -a .vector -n .const			# constants follow vectors
++seg ._construct_ -a .const -n .construct -k		# constructor table
++seg .text -a .construct -n .text			# code follow constants
++seg .eeprom -b 0x1000 -m 0x800	-cs eeprom		# internal eeprom
++seg .bsct -b 0x0 -m 0x100 -n .bsct -cs data		# internal ram
++seg .ubsct -a .bsct -n .ubsct
++seg .bit -a .ubsct -n .bit -id
++seg .data -a .bit -m 0xcff -n .data
++seg .bss -a .data -n .bss
+crtspi0.sm8
+@*
+libcppsl0.sm8
+libfsl0.sm8
+libisl0.sm8
+libll.sm8
+libm0.sm8
++def __memory=@.bss
++def __endzp=@.ubsct
++def __stack=0xfff
++def __startmem=@.bss
++def __endmem=0xdfe
++def __ctorstart=start(.construct)
++def __ctorend=end(.construct)

variants/XMOTO_8L151G4/stm8l15x_conf.h

@@ -0,0 +1,91 @@
+/**
+  ******************************************************************************
+  * @file    Project/STM8L15x_StdPeriph_Template/stm8l15x_conf.h
+  * @author  MCD Application Team
+  * @version V1.6.1
+  * @date    10-August-2018
+  * @brief   Library configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2018 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software
+  * distributed under the License is distributed on an "AS IS" BASIS,
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM8L15x_CONF_H
+#define __STM8L15x_CONF_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm8l15x.h"
+
+/* Uncomment the line below to enable peripheral header file inclusion */
+#include "stm8l15x_adc.h"
+#include "stm8l15x_aes.h"
+#include "stm8l15x_beep.h"
+#include "stm8l15x_clk.h"
+#include "stm8l15x_comp.h"
+#include "stm8l15x_dac.h"
+#include "stm8l15x_dma.h"
+#include "stm8l15x_exti.h"
+#include "stm8l15x_flash.h"
+#include "stm8l15x_gpio.h"
+#include "stm8l15x_i2c.h"
+#include "stm8l15x_irtim.h"
+#include "stm8l15x_itc.h"
+#include "stm8l15x_iwdg.h"
+#include "stm8l15x_lcd.h"
+#include "stm8l15x_pwr.h"
+#include "stm8l15x_rst.h"
+#include "stm8l15x_rtc.h"
+#include "stm8l15x_spi.h"
+#include "stm8l15x_syscfg.h"
+#include "stm8l15x_tim1.h"
+#include "stm8l15x_tim2.h"
+#include "stm8l15x_tim3.h"
+#include "stm8l15x_tim4.h"
+#include "stm8l15x_tim5.h"
+#include "stm8l15x_usart.h"
+#include "stm8l15x_wfe.h"
+#include "stm8l15x_wwdg.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Uncomment the line below to expanse the "assert_param" macro in the
+   Standard Peripheral Library drivers code */
+/* #define USE_FULL_ASSERT    (1) */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param expr: If expr is false, it calls assert_failed function
+  *   which reports the name of the source file and the source
+  *   line number of the call that failed.
+  *   If expr is true, it returns no value.
+  * @retval : None
+  */
+  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#endif /* __STM8L15x_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

variants/XMOTO_8L151G4/stm8l15x_it.c

@@ -0,0 +1,63 @@
+/**
+  ******************************************************************************
+  * @file    Project/STM8L15x_StdPeriph_Template/stm8l15x_it.c
+  * @author  MCD Application Team
+  * @version V1.6.1
+  * @date    30-September-2014
+  * @brief   Main Interrupt Service Routines.
+  *          This file provides template for all peripherals interrupt service routine.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software
+  * distributed under the License is distributed on an "AS IS" BASIS,
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm8_it.h"
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Public functions ----------------------------------------------------------*/
+
+#ifdef _COSMIC_
+extern void _stext();         /* startup routine */
+
+#pragma section const {vector}
+
+void (* const @vector _vectab[32])() = {
+	_stext,					/* RESET       */
+  I2C1_SPI2_IRQHandler
+  };
+#endif
+/**
+  * @}
+  */
+#ifdef __cplusplus
+}
+#endif
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/