Merge tag 'fbdev-3.19' of git://git.kernel.org/pub/scm/linux/kernel/g…

…it/tomba/linux

Pull fbdev updates from Tomi Valkeinen:
 - support for mx6sl and mx6sx
 - OMAP HDMI audio rewrite to make it finally work
 - OMAP video PLL work to prepare for new DRA7xx SoCs
 - simplefb DT related improvements

* tag 'fbdev-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (81 commits)
  video: uvesafb: Deletion of an unnecessary check before the function call "platform_device_put"
  video: fbdev-VIA: Deletion of an unnecessary check before the function call "framebuffer_release"
  video: fbdev-MMP: Deletion of an unnecessary check before the function call "mmp_unregister_path"
  video: mx3fb: Deletion of an unnecessary check before the function call "backlight_device_unregister"
  video: fbdev-OMAP2: Deletion of unnecessary checks before the function call "i2c_put_adapter"
  video: fbdev-SIS: Deletion of unnecessary checks before the function call "pci_dev_put"
  video: smscufx: Deletion of unnecessary checks before the function call "vfree"
  video: udlfb: Deletion of unnecessary checks before the function call "vfree"
  video: uvesafb: Deletion of an unnecessary check before the function call "uvesafb_free"
  video: fbdev-LCDC: Deletion of an unnecessary check before the function call "vfree"
  video: fbdev: arkfb: suppress build warning
  video: fbdev: s3fb: suppress build warning
  video: fbdev: vt8623fb: suppress build warning
  OMAPDSS: hdmi5: Fix bit field for IEC958_AES2_CON_SOURCE
  OMAPDSS: hdmi: Remove __exit qualifier from hdmi_uninit_output()
  OMAPDSS: hdmi5: Change hdmi_wp idlemode to to no_idle for audio playback
  OMAPDSS: Remove all references to obsolete HDMI audio callbacks
  ASoC: omap: Remove obsolete HDMI audio code and Kconfig options
  OMAPDSS: hdmi5: Register ASoC platform device for omap hdmi audio
  OMAPDSS: hdmi5: Remove callbacks for the old ASoC DAI driver
  ...

Documentation/devicetree/bindings/video/simple-framebuffer-sunxi.txt

@@ -0,0 +1,33 @@
+Sunxi specific Simple Framebuffer bindings
+
+This binding documents sunxi specific extensions to the simple-framebuffer
+bindings. The sunxi simplefb u-boot code relies on the devicetree containing
+pre-populated simplefb nodes.
+
+These extensions are intended so that u-boot can select the right node based
+on which pipeline is being used. As such they are solely intended for
+firmware / bootloader use, and the OS should ignore them.
+
+Required properties:
+- compatible: "allwinner,simple-framebuffer"
+- allwinner,pipeline, one of:
+  "de_be0-lcd0"
+  "de_be1-lcd1"
+  "de_be0-lcd0-hdmi"
+  "de_be1-lcd1-hdmi"
+
+Example:
+
+chosen {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	framebuffer@0 {
+		compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+		allwinner,pipeline = "de_be0-lcd0-hdmi";
+		clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+			 <&ahb_gates 44>;
+		status = "disabled";
+	};
+};

Documentation/devicetree/bindings/video/simple-framebuffer.txt

@@ -1,8 +1,40 @@
 Simple Framebuffer
 
-A simple frame-buffer describes a raw memory region that may be rendered to,
-with the assumption that the display hardware has already been set up to scan
-out from that buffer.
+A simple frame-buffer describes a frame-buffer setup by firmware or
+the bootloader, with the assumption that the display hardware has already
+been set up to scan out from the memory pointed to by the reg property.
+
+Since simplefb nodes represent runtime information they must be sub-nodes of
+the chosen node (*). Simplefb nodes must be named "framebuffer@<address>".
+
+If the devicetree contains nodes for the display hardware used by a simplefb,
+then the simplefb node must contain a property called "display", which
+contains a phandle pointing to the primary display hw node, so that the OS
+knows which simplefb to disable when handing over control to a driver for the
+real hardware. The bindings for the hw nodes must specify which node is
+considered the primary node.
+
+It is advised to add display# aliases to help the OS determine how to number
+things. If display# aliases are used, then if the simplefb node contains a
+"display" property then the /aliases/display# path must point to the display
+hw node the "display" property points to, otherwise it must point directly
+to the simplefb node.
+
+If a simplefb node represents the preferred console for user interaction,
+then the chosen node's stdout-path property should point to it, or to the
+primary display hw node, as with display# aliases. If display aliases are
+used then it should be set to the alias instead.
+
+It is advised that devicetree files contain pre-filled, disabled framebuffer
+nodes, so that the firmware only needs to update the mode information and
+enable them. This way if e.g. later on support for more display clocks get
+added, the simplefb nodes will already contain this info and the firmware
+does not need to be updated.
+
+If pre-filled framebuffer nodes are used, the firmware may need extra
+information to find the right node. In that case an extra platform specific
+compatible and platform specific properties should be used and documented,
+see e.g. simple-framebuffer-sunxi.txt .
 
 Required properties:
 - compatible: "simple-framebuffer"
@@ -14,13 +46,41 @@ Required properties:
   - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b).
   - a8b8g8r8 (32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r).
 
+Optional properties:
+- clocks : List of clocks used by the framebuffer. Clocks listed here
+           are expected to already be configured correctly. The OS must
+           ensure these clocks are not modified or disabled while the
+           simple framebuffer remains active.
+- display : phandle pointing to the primary display hardware node
+
 Example:
 
-	framebuffer {
+aliases {
+	display0 = &lcdc0;
+}
+
+chosen {
+	framebuffer0: framebuffer@1d385000 {
 		compatible = "simple-framebuffer";
 		reg = <0x1d385000 (1600 * 1200 * 2)>;
 		width = <1600>;
 		height = <1200>;
 		stride = <(1600 * 2)>;
 		format = "r5g6b5";
+		clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>;
+		display = <&lcdc0>;
+	};
+	stdout-path = "display0";
+};
+
+soc@01c00000 {
+	lcdc0: lcdc@1c0c000 {
+		compatible = "allwinner,sun4i-a10-lcdc";
+		...
 	};
+};
+
+
+*) Older devicetree files may have a compatible = "simple-framebuffer" node
+in a different place, operating systems must first enumerate any compatible
+nodes found under chosen and then check for other compatible nodes.

MAINTAINERS

@@ -8586,6 +8586,14 @@ F:	drivers/media/usb/siano/
 F:	drivers/media/usb/siano/
 F:	drivers/media/mmc/siano/
 
+SIMPLEFB FB DRIVER
+M:	Hans de Goede <hdegoede@redhat.com>
+L:	linux-fbdev@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/video/simple-framebuffer.txt
+F:	drivers/video/fbdev/simplefb.c
+F:	include/linux/platform_data/simplefb.h
+
 SH_VEU V4L2 MEM2MEM DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan

drivers/video/console/fbcon.c

@@ -3624,7 +3624,7 @@ static int __init fb_console_init(void)
 	return 0;
 }
 
-module_init(fb_console_init);
+fs_initcall(fb_console_init);
 
 #ifdef MODULE
 

drivers/video/fbdev/Kconfig

@@ -2408,7 +2408,7 @@ config FB_JZ4740
 
 config FB_MXS
 	tristate "MXS LCD framebuffer support"
-	depends on FB && ARCH_MXS
+	depends on FB && (ARCH_MXS || ARCH_MXC)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT

drivers/video/fbdev/amba-clcd.c

@@ -27,7 +27,6 @@
 #include <linux/bitops.h>
 #include <linux/clk.h>
 #include <linux/hardirq.h>
-#include <linux/dma-mapping.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_graph.h>

drivers/video/fbdev/arkfb.c

@@ -1016,7 +1016,7 @@ static int ark_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 
 	pcibios_bus_to_resource(dev->bus, &vga_res, &bus_reg);
 
-	par->state.vgabase = (void __iomem *) vga_res.start;
+	par->state.vgabase = (void __iomem *) (unsigned long) vga_res.start;
 
 	/* FIXME get memsize */
 	regval = vga_rseq(par->state.vgabase, 0x10);

drivers/video/fbdev/mmp/core.c

@@ -223,10 +223,10 @@ struct mmp_path *mmp_register_path(struct mmp_path_info *info)
 EXPORT_SYMBOL_GPL(mmp_register_path);
 
 /*
- * mmp_unregister_path - unregister and destory path
- * @p: path to be destoried.
+ * mmp_unregister_path - unregister and destroy path
+ * @p: path to be destroyed.
  *
- * this function registers path and destorys it.
+ * this function registers path and destroys it.
  */
 void mmp_unregister_path(struct mmp_path *path)
 {

drivers/video/fbdev/mmp/hw/mmp_ctrl.c

@@ -441,8 +441,7 @@ static void path_deinit(struct mmphw_path_plat *path_plat)
 	if (!path_plat)
 		return;
 
-	if (path_plat->path)
-		mmp_unregister_path(path_plat->path);
+	mmp_unregister_path(path_plat->path);
 }
 
 static int mmphw_probe(struct platform_device *pdev)

drivers/video/fbdev/mx3fb.c

@@ -334,8 +334,7 @@ static void mx3fb_init_backlight(struct mx3fb_data *fbd)
 
 static void mx3fb_exit_backlight(struct mx3fb_data *fbd)
 {
-	if (fbd->bl)
-		backlight_device_unregister(fbd->bl);
+	backlight_device_unregister(fbd->bl);
 }
 
 static void mx3fb_dma_done(void *);

drivers/video/fbdev/mxsfb.c

@@ -172,6 +172,8 @@ struct mxsfb_info {
 	struct fb_info fb_info;
 	struct platform_device *pdev;
 	struct clk *clk;
+	struct clk *clk_axi;
+	struct clk *clk_disp_axi;
 	void __iomem *base;	/* registers */
 	unsigned allocated_size;
 	int enabled;
@@ -331,6 +333,11 @@ static void mxsfb_enable_controller(struct fb_info *fb_info)
 		}
 	}
 
+	if (host->clk_axi)
+		clk_prepare_enable(host->clk_axi);
+
+	if (host->clk_disp_axi)
+		clk_prepare_enable(host->clk_disp_axi);
 	clk_prepare_enable(host->clk);
 	clk_set_rate(host->clk, PICOS2KHZ(fb_info->var.pixclock) * 1000U);
 
@@ -374,6 +381,10 @@ static void mxsfb_disable_controller(struct fb_info *fb_info)
 	writel(reg & ~VDCTRL4_SYNC_SIGNALS_ON, host->base + LCDC_VDCTRL4);
 
 	clk_disable_unprepare(host->clk);
+	if (host->clk_disp_axi)
+		clk_disable_unprepare(host->clk_disp_axi);
+	if (host->clk_axi)
+		clk_disable_unprepare(host->clk_axi);
 
 	host->enabled = 0;
 
@@ -867,6 +878,14 @@ static int mxsfb_probe(struct platform_device *pdev)
 		goto fb_release;
 	}
 
+	host->clk_axi = devm_clk_get(&host->pdev->dev, "axi");
+	if (IS_ERR(host->clk_axi))
+		host->clk_axi = NULL;
+
+	host->clk_disp_axi = devm_clk_get(&host->pdev->dev, "disp_axi");
+	if (IS_ERR(host->clk_disp_axi))
+		host->clk_disp_axi = NULL;
+
 	host->reg_lcd = devm_regulator_get(&pdev->dev, "lcd");
 	if (IS_ERR(host->reg_lcd))
 		host->reg_lcd = NULL;

drivers/video/fbdev/omap2/displays-new/connector-dvi.c

@@ -262,8 +262,7 @@ static int dvic_probe_pdata(struct platform_device *pdev)
 
 	in = omap_dss_find_output(pdata->source);
 	if (in == NULL) {
-		if (ddata->i2c_adapter)
-			i2c_put_adapter(ddata->i2c_adapter);
+		i2c_put_adapter(ddata->i2c_adapter);
 
 		dev_err(&pdev->dev, "Failed to find video source\n");
 		return -EPROBE_DEFER;
@@ -352,8 +351,7 @@ static int dvic_probe(struct platform_device *pdev)
 err_reg:
 	omap_dss_put_device(ddata->in);
 
-	if (ddata->i2c_adapter)
-		i2c_put_adapter(ddata->i2c_adapter);
+	i2c_put_adapter(ddata->i2c_adapter);
 
 	return r;
 }
@@ -371,8 +369,7 @@ static int __exit dvic_remove(struct platform_device *pdev)
 
 	omap_dss_put_device(in);
 
-	if (ddata->i2c_adapter)
-		i2c_put_adapter(ddata->i2c_adapter);
+	i2c_put_adapter(ddata->i2c_adapter);
 
 	return 0;
 }

drivers/video/fbdev/omap2/displays-new/connector-hdmi.c

@@ -170,98 +170,6 @@ static bool hdmic_detect(struct omap_dss_device *dssdev)
 		return in->ops.hdmi->detect(in);
 }
 
-static int hdmic_audio_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	/* enable audio only if the display is active */
-	if (!omapdss_device_is_enabled(dssdev))
-		return -EPERM;
-
-	r = in->ops.hdmi->audio_enable(in);
-	if (r)
-		return r;
-
-	dssdev->audio_state = OMAP_DSS_AUDIO_ENABLED;
-
-	return 0;
-}
-
-static void hdmic_audio_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	in->ops.hdmi->audio_disable(in);
-
-	dssdev->audio_state = OMAP_DSS_AUDIO_DISABLED;
-}
-
-static int hdmic_audio_start(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	/*
-	 * No need to check the panel state. It was checked when trasitioning
-	 * to AUDIO_ENABLED.
-	 */
-	if (dssdev->audio_state != OMAP_DSS_AUDIO_ENABLED)
-		return -EPERM;
-
-	r = in->ops.hdmi->audio_start(in);
-	if (r)
-		return r;
-
-	dssdev->audio_state = OMAP_DSS_AUDIO_PLAYING;
-
-	return 0;
-}
-
-static void hdmic_audio_stop(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	in->ops.hdmi->audio_stop(in);
-
-	dssdev->audio_state = OMAP_DSS_AUDIO_ENABLED;
-}
-
-static bool hdmic_audio_supported(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_enabled(dssdev))
-		return false;
-
-	return in->ops.hdmi->audio_supported(in);
-}
-
-static int hdmic_audio_config(struct omap_dss_device *dssdev,
-		struct omap_dss_audio *audio)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	/* config audio only if the display is active */
-	if (!omapdss_device_is_enabled(dssdev))
-		return -EPERM;
-
-	r = in->ops.hdmi->audio_config(in, audio);
-	if (r)
-		return r;
-
-	dssdev->audio_state = OMAP_DSS_AUDIO_CONFIGURED;
-
-	return 0;
-}
-
 static int hdmic_set_hdmi_mode(struct omap_dss_device *dssdev, bool hdmi_mode)
 {
 	struct panel_drv_data *ddata = to_panel_data(dssdev);
@@ -296,13 +204,6 @@ static struct omap_dss_driver hdmic_driver = {
 	.detect			= hdmic_detect,
 	.set_hdmi_mode		= hdmic_set_hdmi_mode,
 	.set_hdmi_infoframe	= hdmic_set_infoframe,
-
-	.audio_enable		= hdmic_audio_enable,
-	.audio_disable		= hdmic_audio_disable,
-	.audio_start		= hdmic_audio_start,
-	.audio_stop		= hdmic_audio_stop,
-	.audio_supported	= hdmic_audio_supported,
-	.audio_config		= hdmic_audio_config,
 };
 
 static int hdmic_probe_pdata(struct platform_device *pdev)