Smokey-s_Aquila_C2_H32_Firmware

H32 Firmware for the Aquila C2.

Firmware was compiled with Keil MDK using the source code provided by Voxelab. Voxelab C2 GitHub

Features

Acceleration and Jerk settings

Adjusted to help with skipped steps using default settings. Settings were too high in Voxelab firmware.

S-Curve Acceleration enabled

This option eliminates vibration during printing by fitting a Bezier curve to move acceleration, producing much smoother direction changes.

See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained

Manual Probing, Mesh Bed Leveling, and LCD Bed Leveling enabled

The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. Use G29 repeatedly, adjusting the Z height at each point with movement commands or the LCD controller.

Mesh Bed Leveling provides a method to perform leveling in steps so you can manually adjust the Z height at each grid-point. With an LCD controller the process is guided step-by-step.

Additional Preheat Profiles added

1. Leveling
2. PLA
3. PLA+
4. PETG
5. ABS

Scroll Long Filenames in SD card menu

SD Card Alphabetical Sorting and Long Filename scrolling in SD card menu