Skip to content

Latest commit

 

History

History
69 lines (57 loc) · 3.03 KB

FAN.md

File metadata and controls

69 lines (57 loc) · 3.03 KB
Raw

SmartIR Media Player

For this platform to work, we need a .json file containing all the necessary IR or RF commands. Find your device's brand code here and add the number in the device_code field. The compoenent will download it to the correct folder. If your device is not working, you will need to learn your own codes and place the .json file in smartir/codes/fan/ subfolders. Please note that the device_code field only accepts positive numbers. The .json extension is not required.

Configuration variables:

name (Optional): The name of the device
unique_id (Optional): An ID that uniquely identifies this device. If two devices have the same unique ID, Home Assistant will raise an exception.
device_code (Required): ...... (Accepts only positive numbers)
controller_data (Required): The data required for the controller to function. Enter the IP address of the Broadlink device (must be an already configured device) or the MQTT topic on which to send commands.
power_sensor (Optional): entity_id for a sensor that monitors whether your device is actually On or Off. This may be a power monitor sensor. (Accepts only on/off states)

Example (using broadlink controller):

smartir:

switch:
  - platform: broadlink
    host: 192.168.10.10
    mac: '00:00:00:00:00:00'
    
fan:
  - platform: smartir
    name: Bedroom fan
    unique_id: bedroom_fan
    device_code: 1000
    controller_data: 192.168.10.10
    power_sensor: binary_sensor.fan_power

Make sure the broadlink switch is already installed. Go to the Home Assistant UI/dev service, find the broadlink send_packet service and copy the name of it. Add the name of the send_packet service to the controller_send_service field.

Example (using mqtt controller):

smartir:
    
fan:
  - platform: smartir
    name: Bedroom fan
    unique_id: bedroom_fan
    device_code: 2000
    controller_data: home-assistant/bedroom-fan/command
    power_sensor: binary_sensor.fan_power

Available codes for Fan devices:

Below are the code files created by the people in the community. Before you start creating your own code file, try if one of them works for your device. Please open an issue if your device is working and not included in the supported models.

Kaze

Code Supported Models Controller
1000 Unknown Broadlink

Acorn

Code Supported Models Controller
1020 Unknown Broadlink

Lucci Air

Code Supported Models Controller
1040 Aria Broadlink

Super Fan

Code Supported Models Controller
1060 A1 Broadlink