Maintainer: Nils Wistoff nwistoff@iis.ee.ethz.ch
This repository contains commonly used cells and headers for use in various projects.
This repository currently contains the following cells, ordered by categories. Please note that cells with status deprecated are not to be used for new designs and only serve to provide compatibility with old code.
Name | Description | Status | Superseded By |
---|---|---|---|
clk_int_div |
Arbitrary integer clock divier with config interface and 50% output clock duty cycle | active | |
clk_div |
Clock divider with integer divisor | deprecated | clk_int_div |
clock_divider |
Clock divider with configuration registers | deprecated | clk_int_div |
clock_divider_counter |
Clock divider using a counter | deprecated | clk_int_div |
rstgen |
Reset synchronizer | active | |
rstgen_bypass |
Reset synchronizer with dedicated test reset bypass | active |
Name | Description | Status | Superseded By |
---|---|---|---|
cdc_4phase |
Clock domain crossing using 4-phase handshake, with ready/valid interface | active | |
cdc_2phase |
Clock domain crossing using two-phase handshake, with ready/valid interface | active | |
cdc_2phase_clearable |
Identical to cdc_2phase but supports one-sided async/sync resetting of either src or dst |
active | |
cdc_fifo_2phase |
Clock domain crossing FIFO using two-phase handshake, with ready/valid interface | active | |
cdc_fifo_gray |
Clock domain crossing FIFO using a gray-counter, with ready/valid interface | active | |
cdc_fifo_gray_clearable |
Identical to cdc_fifo_gray but supports one-sided async/sync resetting of either src or dst |
active | |
cdc_reset_ctrlr |
Lock-step reset sequencer accross clock domains (internally used by clearable CDCs) | active | |
edge_detect |
Rising/falling edge detector | active | |
edge_propagator |
Propagates a single-cycle pulse across an asynchronous clock domain crossing | active | |
edge_propagator_ack |
edge_propagator with sender-synchronous acknowledge pin (flags received pulse) |
active | |
edge_propagator_rx |
Receive slice of edge_propagator , requires only the receiver clock |
active | |
edge_propagator_tx |
Transmit slice of edge_propagator , requires only the sender clock |
active | |
isochronous_spill_register |
Isochronous clock domain crossing and full handshake (like spill_register ) |
active | |
isochronous_4phase_handshake |
Isochronous four-phase handshake. | active | |
pulp_sync |
Serial line synchronizer | deprecated | sync |
pulp_sync_wedge |
Serial line synchronizer with edge detector | deprecated | sync_wedge |
serial_deglitch |
Serial line deglitcher | active | |
sync |
Serial line synchronizer | active | |
sync_wedge |
Serial line synchronizer with edge detector | active |
Name | Description | Status | Superseded By |
---|---|---|---|
counter |
Generic up/down counter with overflow detection | active | |
delta_counter |
Up/down counter with variable delta and overflow detection | active | |
generic_LFSR_8bit |
8-bit linear feedback shift register (LFSR) | deprecated | lfsr_8bit |
lfsr_8bit |
8-bit linear feedback shift register (LFSR) | active | |
lfsr_16bit |
16-bit linear feedback shift register (LFSR) | active | |
lfsr |
4...64-bit parametric Galois LFSR with optional whitening feature | active | |
max_counter |
Up/down counter with variable delta that tracks its maximum value | active | |
mv_filter |
ZARUBAF ADD DESCRIPTION | active |
Name | Description | Status | Superseded By |
---|---|---|---|
addr_decode |
Address map decoder | active | |
ecc_decode |
SECDED Decoder (Single Error Correction, Double Error Detection) | active | |
ecc_encode |
SECDED Encoder (Single Error Correction, Double Error Detection) | active | |
binary_to_gray |
Binary to gray code converter | active | |
find_first_one |
Leading-one finder / leading-zero counter | deprecated | lzc |
gray_to_binary |
Gray code to binary converter | active | |
lzc |
Leading/trailing-zero counter | active | |
onehot_to_bin |
One-hot to binary converter | active | |
shift_reg |
Shift register for arbitrary types | active | |
rr_arb_tree |
Round-robin arbiter for req/gnt and vld/rdy interfaces with optional priority | active | |
rrarbiter |
Round-robin arbiter for req/ack interface with look-ahead | deprecated | rr_arb_tree |
prioarbiter |
Priority arbiter arbiter for req/ack interface with look-ahead | deprecated | rr_arb_tree |
fall_through_register |
Fall-through register with ready/valid interface | active | |
spill_register_flushable |
Register with ready/valid interface to cut all combinational interface paths and additional flush signal. | active | |
spill_register |
Register with ready/valid interface to cut all combinational interface paths | active | |
stream_arbiter |
Round-robin arbiter for ready/valid stream interface | active | |
stream_arbiter_flushable |
Round-robin arbiter for ready/valid stream interface and flush functionality | active | |
stream_demux |
Ready/valid interface demultiplexer | active | |
stream_join |
Ready/valid handshake join multiple to one common | active | |
stream_mux |
Ready/valid interface multiplexer | active | |
stream_register |
Register with ready/valid interface | active | |
stream_fork |
Ready/valid fork | active | |
stream_fork_dynamic |
Ready/valid fork, with selection mask for partial forking | active | |
stream_filter |
Ready/valid filter | active | |
stream_delay |
Randomize or delay ready/valid interface | active | |
stream_to_mem |
Use memories without flow control for output data in streams. | active | |
stream_xbar |
Fully connected crossbar with ready/valid interface. | active | |
stream_omega_net |
One-way stream omega-net with ready/valid interface. Isomorphic to a butterfly. | active | |
sub_per_hash |
Substitution-permutation hash function | active | |
popcount |
Combinatorial popcount (hamming weight) | active |
Name | Description | Status | Superseded By |
---|---|---|---|
cb_filter |
Counting-Bloom-Filter with combinational lookup | active | |
fifo |
FIFO register with upper threshold | deprecated | fifo_v3 |
fifo_v2 |
FIFO register with upper and lower threshold | deprecated | fifo_v3 |
fifo_v3 |
FIFO register with generic fill counts | active | |
stream_fifo |
FIFO register with ready/valid interface | active | |
generic_fifo |
FIFO register without thresholds | deprecated | fifo_v3 |
generic_fifo_adv |
FIFO register without thresholds | deprecated | fifo_v3 |
sram |
SRAM behavioral model | active | |
plru_tree |
Pseudo least recently used tree | active | |
unread |
Empty module to sink unconnected outputs into | active |
This repository currently contains the following header files.
The header file registers.svh
contains macros that expand to descriptions of registers.
To avoid misuse of always_ff
blocks, only the following macros shall be used to describe sequential behavior.
The use of linter rules that flag explicit uses of always_ff
in source code is encouraged.
Macro | Arguments | Description |
---|---|---|
`FF |
q_sig , d_sig , rst_val , (clk_sig , arstn_sig ) |
Flip-flop with asynchronous active-low reset |
`FFAR |
q_sig , d_sig , rst_val , clk_sig , arst_sig |
Flip-flop with asynchronous active-high reset |
`FFARN |
q_sig , d_sig , rst_val , clk_sig , arstn_sig |
deprecated Flip-flop with asynchronous active-low reset |
`FFSR |
q_sig , d_sig , rst_val , clk_sig , rst_sig |
Flip-flop with synchronous active-high reset |
`FFSRN |
q_sig , d_sig , rst_val , clk_sig , rstn_sig |
Flip-flop with synchronous active-low reset |
`FFNR |
q_sig , d_sig , clk_sig |
Flip-flop without reset |
`FFL |
q_sig , d_sig , load_ena , rst_val , (clk_sig , arstn_sig ) |
Flip-flop with load-enable and asynchronous active-low reset |
`FFLAR |
q_sig , d_sig , load_ena , rst_val , clk_sig , arst_sig |
Flip-flop with load-enable and asynchronous active-high reset |
`FFLARN |
q_sig , d_sig , load_ena , rst_val , clk_sig , arstn_sig |
deprecated Flip-flop with load-enable and asynchronous active-low reset |
`FFLSR |
q_sig , d_sig , load_ena , rst_val , clk_sig , rst_sig |
Flip-flop with load-enable and synchronous active-high reset |
`FFLSRN |
q_sig , d_sig , load_ena , rst_val , clk_sig , rstn_sig |
Flip-flop with load-enable and synchronous active-low reset |
`FFLNR |
q_sig , d_sig , load_ena , clk_sig |
Flip-flop with load-enable without reset |
- The name of the clock and reset signals for implicit variants is
clk_i
andrst_ni
, respectively. - Argument suffix
_sig
indicates signal names for present and next state as well as clocks and resets. - Argument
rst_val
specifies the value literal to be assigned upon reset. - Argument
load_ena
specifies the boolean expression that forms the load enable of the register.
The header file assertions.svh
contains macros that expand to assertion blocks.
These macros should recduce the effort in writing many assertions and make it
easier to use them. They are identical with the macros used by lowrisc
and just re-implemented here for the sake of easier use in PULP projects (the same include guard is used so they should not clash).
Macro | Arguments | Description |
---|---|---|
`ASSERT_I |
__name , __prop |
Immediate assertion |
`ASSERT_INIT |
__name , __prop |
Assertion in initial block. Can be used for things like parameter checking |
`ASSERT_FINAL |
__name , __prop |
Assertion in final block |
`ASSERT |
__name , __prop , (__clk , __rst ) |
Assert a concurrent property directly |
`ASSERT_NEVER |
__name , __prop , (__clk , __rst ) |
Assert a concurrent property NEVER happens |
`ASSERT_KNOWN |
__name , __sig , (__clk , __rst ) |
Concurrent clocked assertion with custom error message |
`COVER |
__name , __prop , (__clk , __rst ) |
Cover a concurrent property |
- The name of the clock and reset signals for implicit variants is
clk_i
andrst_ni
, respectively.
Macro | Arguments | Description |
---|---|---|
`ASSERT_PULSE |
__name , __sig , (__clk , __rst ) |
Assert that signal is an active-high pulse with pulse length of 1 clock cycle |
`ASSERT_IF |
__name , __prop , __enable , (__clk , __rst ) |
Assert that a property is true only when an enable signal is set |
`ASSERT_KNOWN_IF |
__name , __sig , __enable , (__clk , __rst ) |
Assert that signal has a known value (each bit is either '0' or '1') after reset if enable is set |
- The name of the clock and reset signals for implicit variants is
clk_i
andrst_ni
, respectively.
Macro | Arguments | Description |
---|---|---|
`ASSUME |
__name , __prop , (__clk , __rst ) |
Assume a concurrent property |
`ASSUME_I |
__name , __prop |
Assume an immediate property |
- The name of the clock and reset signals for implicit variants is
clk_i
andrst_ni
, respectively.
Macro | Arguments | Description |
---|---|---|
`ASSUME_FPV |
__name , __prop , (__clk , __rst ) |
Assume a concurrent property during formal verification only |
`ASSUME_I_FPV |
__name , __prop |
Assume a concurrent property during formal verification only |
`COVER_FPV |
__name , __prop , (__clk , __rst ) |
Cover a concurrent property during formal verification |
- The name of the clock and reset signals for implicit variants is
clk_i
andrst_ni
, respectively.