Error Opening Device RTB2004 #101

Problem:

I tried to connect to the RTB2004 with hameg-hmo driver and TCP Raw.
Pulseview gets stuck with the query ':LOG3:STAT? ' The oscilloscope responds with -114, "Header suffix out of range"

The osciloscope is listed as a compatipel: Link
It seems that the LOG3 Querry is not supported on the RTB2004. Firmware 02.400
Is it possible to skip this section? I Only need the Analog Inputs.

I tried the stable and nightly version of Pulsviwe
With the VXI protocol I did not get any connection at all.

Versions, libraries and features:

PulseView | 0.5.0-git-e2fe9df
Qt | 5.7.1
glibmm | 2.42.0
Boost | 1_60
exprtk | 20200101
libsigrok | 0.6.0-git/4:0:0 (rt: 0.6.0-git-f06f788/4:0:0)

• glib | 2.44.1 (rt: 2.44.1/4401:1)
• zlib | 1.2.11
• libzip | 1.5.2
• minilzo | 2.10
• libserialport | 0.1.1/1:0:1 (rt: 0.1.1/1:0:1)
• libusb-1.0 | 1.0.20.11003-rc3 API 0x01000104
• hidapi | 0.11.0-dev
• libftdi | 1.4
• Host | x86_64-w64-mingw32.static.posix, little-endian
• SCPI backends | TCP, serial, USBTMC
  libsigrokdecode | 0.6.0-git-71f4514/4:0:0 (rt: 0.6.0-git-71f4514/4:0:0)
• glib | 2.44.1 (rt: 2.44.1/4401:1)
• Python | 3.4.4 / 0x30404f0 (API 1013, ABI 3)
• Host | x86_64-w64-mingw32.static.posix, little-endian

Full Log:

sr: asix-omega-rtm-cli: Cannot execute RTM CLI process: Failed to execute helper program (Invalid argument)
sr: log: libsigrok loglevel set to 4.
srd: libsigrokdecode loglevel set to 4.
sr: log: libsigrok loglevel set to 5.
srd: libsigrokdecode loglevel set to 5.
sr: hwdriver: sr_config_list(): key 2147418112 (NULL) sdi 0000000000000000 cg NULL -> [uint32 20000, 20001]
sr: serial: Parsed serial device: tcp-raw/192.168.178.85/5025.
sr: scpi: Opening RAW TCP device tcp-raw/192.168.178.85/5025.
sr: scpi_tcp: Successfully sent SCPI command: '*IDN? '.
sr: scpi: Got response: 'Rohde&Schwarz,RTB2004,1333.1005k04/201958,02.400', length 48.
sr: hwdriver: Scan found 1 devices (hameg-hmo).
sr: device: demo: Closing device instance.
sr: device: hameg-hmo: Opening device instance.
sr: hameg-hmo: Fetching scope state
sr: scpi_tcp: Successfully sent SCPI command: ':CHAN1:STAT? '.
sr: scpi: Got response: '1', length 1.
sr: scpi_tcp: Successfully sent SCPI command: ':CHAN1:SCAL? '.
sr: scpi: Got response: '1.00E+00', length 8.
sr: scpi_tcp: Successfully sent SCPI command: ':CHAN1:POS? '.
sr: scpi: Got response: '-9.700E-01', length 10.
sr: scpi_tcp: Successfully sent SCPI command: ':CHAN1:COUP? '.
sr: scpi: Got response: 'DCL', length 3.
sr: scpi_tcp: Successfully sent SCPI command: ':PROB1:SET:ATT:UNIT? '.
sr: scpi: Got response: 'V', length 1.
sr: scpi_tcp: Successfully sent SCPI command: ':CHAN2:STAT? '.
sr: scpi: Got response: '1', length 1.
sr: scpi_tcp: Successfully sent SCPI command: ':CHAN2:SCAL? '.
sr: scpi: Got response: '1.00E+00', length 8.
sr: scpi_tcp: Successfully sent SCPI command: ':CHAN2:POS? '.
sr: scpi: Got response: '0.00E+00', length 8.
sr: scpi_tcp: Successfully sent SCPI command: ':CHAN2:COUP? '.
sr: scpi: Got response: 'DCL', length 3.
sr: scpi_tcp: Successfully sent SCPI command: ':PROB2:SET:ATT:UNIT? '.
sr: scpi: Got response: 'V', length 1.
sr: scpi_tcp: Successfully sent SCPI command: ':CHAN3:STAT? '.
sr: scpi: Got response: '1', length 1.
sr: scpi_tcp: Successfully sent SCPI command: ':CHAN3:SCAL? '.
sr: scpi: Got response: '2.00E-01', length 8.
sr: scpi_tcp: Successfully sent SCPI command: ':CHAN3:POS? '.
sr: scpi: Got response: '1.700E-01', length 9.
sr: scpi_tcp: Successfully sent SCPI command: ':CHAN3:COUP? '.
sr: scpi: Got response: 'DCL', length 3.
sr: scpi_tcp: Successfully sent SCPI command: ':PROB3:SET:ATT:UNIT? '.
sr: scpi: Got response: 'A', length 1.
sr: scpi_tcp: Successfully sent SCPI command: ':CHAN4:STAT? '.
sr: scpi: Got response: '1', length 1.
sr: scpi_tcp: Successfully sent SCPI command: ':CHAN4:SCAL? '.
sr: scpi: Got response: '1.00E+00', length 8.
sr: scpi_tcp: Successfully sent SCPI command: ':CHAN4:POS? '.
sr: scpi: Got response: '0.00E+00', length 8.
sr: scpi_tcp: Successfully sent SCPI command: ':CHAN4:COUP? '.
sr: scpi: Got response: 'DCL', length 3.
sr: scpi_tcp: Successfully sent SCPI command: ':PROB4:SET:ATT:UNIT? '.
sr: scpi: Got response: 'V', length 1.
sr: scpi_tcp: Successfully sent SCPI command: ':LOG0:STAT? '.
sr: scpi: Got response: '1', length 1.
sr: scpi_tcp: Successfully sent SCPI command: ':LOG1:STAT? '.
sr: scpi: Got response: '1', length 1.
sr: scpi_tcp: Successfully sent SCPI command: ':LOG2:STAT? '.
sr: scpi: Got response: '1', length 1.
sr: scpi_tcp: Successfully sent SCPI command: ':LOG3:STAT? '.
scpi_tcp: Receive error: Bad file descriptor
sr: scpi: Incompletely read SCPI response.
Notifying user of session error: "Fehler beim Öffnen des Gerätes" ; "generic/unspecified error"