Merge branch 'for-linus' into for-5.5/block

Pull on for-linus to resolve what otherwise would have been a conflict
with the cgroups rstat patchset from Tejun.

* for-linus: (942 commits)
  blkcg: make blkcg_print_stat() print stats only for online blkgs
  nvme: change nvme_passthru_cmd64 to explicitly mark rsvd
  nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths
  nvme-rdma: fix a segmentation fault during module unload
  iocost: don't nest spin_lock_irq in ioc_weight_write()
  io_uring: ensure we clear io_kiocb->result before each issue
  um-ubd: Entrust re-queue to the upper layers
  nvme-multipath: remove unused groups_only mode in ana log
  nvme-multipath: fix possible io hang after ctrl reconnect
  io_uring: don't touch ctx in setup after ring fd install
  io_uring: Fix leaked shadow_req
  Linux 5.4-rc5
  riscv: cleanup do_trap_break
  nbd: verify socket is supported during setup
  ata: libahci_platform: Fix regulator_get_optional() misuse
  nbd: handle racing with error'ed out commands
  nbd: protect cmd->status with cmd->lock
  io_uring: fix bad inflight accounting for SETUP_IOPOLL|SETUP_SQTHREAD
  io_uring: used cached copies of sq->dropped and cq->overflow
  ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
  ...

.mailmap

@@ -196,7 +196,8 @@ Oleksij Rempel <linux@rempel-privat.de> <o.rempel@pengutronix.de>
 Oleksij Rempel <linux@rempel-privat.de> <ore@pengutronix.de>
 Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
 Patrick Mochel <mochel@digitalimplant.org>
-Paul Burton <paul.burton@mips.com> <paul.burton@imgtec.com>
+Paul Burton <paulburton@kernel.org> <paul.burton@imgtec.com>
+Paul Burton <paulburton@kernel.org> <paul.burton@mips.com>
 Peter A Jonsson <pj@ludd.ltu.se>
 Peter Oruba <peter@oruba.de>
 Peter Oruba <peter.oruba@amd.com>
@@ -229,6 +230,7 @@ Shuah Khan <shuah@kernel.org> <shuahkhan@gmail.com>
 Shuah Khan <shuah@kernel.org> <shuah.khan@hp.com>
 Shuah Khan <shuah@kernel.org> <shuahkh@osg.samsung.com>
 Shuah Khan <shuah@kernel.org> <shuah.kh@samsung.com>
+Simon Arlott <simon@octiron.net> <simon@fire.lp0.eu>
 Simon Kelley <simon@thekelleys.org.uk>
 Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
 Stephen Hemminger <shemminger@osdl.org>

CREDITS

@@ -1637,6 +1637,10 @@ S: Panoramastrasse 18
 S: D-69126 Heidelberg
 S: Germany
 
+N: Simon Horman
+M: horms@verge.net.au
+D: Renesas ARM/ARM64 SoC maintainer
+
 N: Christopher Horn
 E: chorn@warwick.net
 D: Miscellaneous sysctl hacks

Documentation/admin-guide/cgroup-v2.rst

@@ -615,8 +615,8 @@ on an IO device and is an example of this type.
 Protections
 -----------
 
-A cgroup is protected to be allocated upto the configured amount of
-the resource if the usages of all its ancestors are under their
+A cgroup is protected upto the configured amount of the resource
+as long as the usages of all its ancestors are under their
 protected levels.  Protections can be hard guarantees or best effort
 soft boundaries.  Protections can also be over-committed in which case
 only upto the amount available to the parent is protected among
@@ -1096,7 +1096,10 @@ PAGE_SIZE multiple when read back.
 	is within its effective min boundary, the cgroup's memory
 	won't be reclaimed under any conditions. If there is no
 	unprotected reclaimable memory available, OOM killer
-	is invoked.
+	is invoked. Above the effective min boundary (or
+	effective low boundary if it is higher), pages are reclaimed
+	proportionally to the overage, reducing reclaim pressure for
+	smaller overages.
 
        Effective min boundary is limited by memory.min values of
 	all ancestor cgroups. If there is memory.min overcommitment
@@ -1118,7 +1121,10 @@ PAGE_SIZE multiple when read back.
 	Best-effort memory protection.  If the memory usage of a
 	cgroup is within its effective low boundary, the cgroup's
 	memory won't be reclaimed unless memory can be reclaimed
-	from unprotected cgroups.
+	from unprotected cgroups.  Above the effective low boundary (or
+	effective min boundary if it is higher), pages are reclaimed
+	proportionally to the overage, reducing reclaim pressure for
+	smaller overages.
 
 	Effective low boundary is limited by memory.low values of
 	all ancestor cgroups. If there is memory.low overcommitment
@@ -2482,8 +2488,10 @@ system performance due to overreclaim, to the point where the feature
 becomes self-defeating.
 
 The memory.low boundary on the other hand is a top-down allocated
-reserve.  A cgroup enjoys reclaim protection when it's within its low,
-which makes delegation of subtrees possible.
+reserve.  A cgroup enjoys reclaim protection when it's within its
+effective low, which makes delegation of subtrees possible. It also
+enjoys having reclaim pressure proportional to its overage when
+above its effective low.
 
 The original high boundary, the hard limit, is defined as a strict
 limit that can not budge, even if the OOM killer has to be called.

Documentation/admin-guide/kernel-parameters.txt

@@ -5302,6 +5302,10 @@
 				the unplug protocol
 			never -- do not unplug even if version check succeeds
 
+	xen_legacy_crash	[X86,XEN]
+			Crash from Xen panic notifier, without executing late
+			panic() code such as dumping handler.
+
 	xen_nopvspin	[X86,XEN]
 			Disables the ticketlock slowpath using Xen PV
 			optimizations.

Documentation/arm64/memory.rst

@@ -154,11 +154,18 @@ return virtual addresses to userspace from a 48-bit range.
 
 Software can "opt-in" to receiving VAs from a 52-bit space by
 specifying an mmap hint parameter that is larger than 48-bit.
+
 For example:
-    maybe_high_address = mmap(~0UL, size, prot, flags,...);
+
+.. code-block:: c
+
+   maybe_high_address = mmap(~0UL, size, prot, flags,...);
 
 It is also possible to build a debug kernel that returns addresses
 from a 52-bit space by enabling the following kernel config options:
+
+.. code-block:: sh
+
    CONFIG_EXPERT=y && CONFIG_ARM64_FORCE_52BIT=y
 
 Note that this option is only intended for debugging applications

Documentation/arm64/silicon-errata.rst

@@ -107,6 +107,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX2 SMMUv3| #126            | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
+| Cavium         | ThunderX2 Core  | #219            | CAVIUM_TX2_ERRATUM_219      |
++----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Freescale/NXP  | LS2080A/LS1043A | A-008585        | FSL_ERRATUM_A008585         |
 +----------------+-----------------+-----------------+-----------------------------+

Documentation/core-api/index.rst

@@ -38,6 +38,7 @@ Core utilities
    protection-keys
    ../RCU/index
    gcc-plugins
+   symbol-namespaces
 
 
 Interfaces for kernel debugging

Documentation/core-api/memory-allocation.rst

@@ -98,6 +98,10 @@ limited. The actual limit depends on the hardware and the kernel
 configuration, but it is a good practice to use `kmalloc` for objects
 smaller than page size.
 
+The address of a chunk allocated with `kmalloc` is aligned to at least
+ARCH_KMALLOC_MINALIGN bytes.  For sizes which are a power of two, the
+alignment is also guaranteed to be at least the respective size.
+
 For large allocations you can use :c:func:`vmalloc` and
 :c:func:`vzalloc`, or directly request pages from the page
 allocator. The memory allocated by `vmalloc` and related functions is

Documentation/dev-tools/kasan.rst

@@ -41,6 +41,9 @@ smaller binary while the latter is 1.1 - 2 times faster.
 Both KASAN modes work with both SLUB and SLAB memory allocators.
 For better bug detection and nicer reporting, enable CONFIG_STACKTRACE.
 
+To augment reports with last allocation and freeing stack of the physical page,
+it is recommended to enable also CONFIG_PAGE_OWNER and boot with page_owner=on.
+
 To disable instrumentation for specific files or directories, add a line
 similar to the following to the respective kernel Makefile:
 

Documentation/dev-tools/kselftest.rst

@@ -89,6 +89,22 @@ To build, save output files in a separate directory with KBUILD_OUTPUT ::
 
   $ export KBUILD_OUTPUT=/tmp/kselftest; make TARGETS="size timers" kselftest
 
+Additionally you can use the "SKIP_TARGETS" variable on the make command
+line to specify one or more targets to exclude from the TARGETS list.
+
+To run all tests but a single subsystem::
+
+  $ make -C tools/testing/selftests SKIP_TARGETS=ptrace run_tests
+
+You can specify multiple tests to skip::
+
+  $  make SKIP_TARGETS="size timers" kselftest
+
+You can also specify a restricted list of tests to run together with a
+dedicated skiplist::
+
+  $  make TARGETS="bpf breakpoints size timers" SKIP_TARGETS=bpf kselftest
+
 See the top-level tools/testing/selftests/Makefile for the list of all
 possible targets.
 

Documentation/devicetree/bindings/arm/rockchip.yaml

@@ -496,12 +496,12 @@ properties:
 
       - description: Theobroma Systems RK3368-uQ7 with Haikou baseboard
         items:
-          - const: tsd,rk3368-uq7-haikou
+          - const: tsd,rk3368-lion-haikou
           - const: rockchip,rk3368
 
       - description: Theobroma Systems RK3399-Q7 with Haikou baseboard
         items:
-          - const: tsd,rk3399-q7-haikou
+          - const: tsd,rk3399-puma-haikou
           - const: rockchip,rk3399
 
       - description: Tronsmart Orion R68 Meta

Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt

@@ -1,8 +1,11 @@
 * Advanced Interrupt Controller (AIC)
 
 Required properties:
-- compatible: Should be "atmel,<chip>-aic"
-  <chip> can be "at91rm9200", "sama5d2", "sama5d3" or "sama5d4"
+- compatible: Should be:
+    - "atmel,<chip>-aic" where  <chip> can be "at91rm9200", "sama5d2",
+      "sama5d3" or "sama5d4"
+    - "microchip,<chip>-aic" where <chip> can be "sam9x60"
+
 - interrupt-controller: Identifies the node as an interrupt controller.
 - #interrupt-cells: The number of cells to define the interrupts. It should be 3.
   The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).

Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/allwinner,sun4i-a10-csi.yaml#
+$id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-csi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Allwinner A10 CMOS Sensor Interface (CSI) Device Tree Bindings
@@ -27,14 +27,12 @@ properties:
   clocks:
     items:
       - description: The CSI interface clock
-      - description: The CSI module clock
       - description: The CSI ISP clock
       - description: The CSI DRAM clock
 
   clock-names:
     items:
       - const: bus
-      - const: mod
       - const: isp
       - const: ram
 
@@ -89,9 +87,8 @@ examples:
         compatible = "allwinner,sun7i-a20-csi0";
         reg = <0x01c09000 0x1000>;
         interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI0>,
-                 <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
-        clock-names = "bus", "mod", "isp", "ram";
+        clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
+        clock-names = "bus", "isp", "ram";
         resets = <&ccu RST_CSI0>;
 
         port {

Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml

@@ -33,13 +33,13 @@ patternProperties:
           allOf:
             - $ref: "/schemas/types.yaml#/definitions/string"
             - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
-              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, ESPI,
-              ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1,
-              GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2,
-              GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12,
-              I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7,
-              I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, LPC,
-              LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2,
+              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC,
+              ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0,
+              GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
+              GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, I2C1, I2C10, I2C11,
+              I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6,
+              I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,
+              LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2,
               MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2,
               NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3,
               NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1,
@@ -48,47 +48,45 @@ patternProperties:
               PWM8, PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3,
               RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12,
               SALT13, SALT14, SALT15, SALT16, SALT2, SALT3, SALT4, SALT5,
-              SALT6, SALT7, SALT8, SALT9, SD1, SD2, SD3, SD3DAT4, SD3DAT5,
-              SD3DAT6, SD3DAT7, SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO,
-              SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1,
-              SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11,
-              TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5,
-              TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1,
-              TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13, UART6, UART7,
-              UART8, UART9, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3,
-              WDTRST4, ]
+              SALT6, SALT7, SALT8, SALT9, SD1, SD2, SGPM1, SGPS1, SIOONCTRL,
+              SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,
+              SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1,
+              TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,
+              TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,
+              THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, UART13,
+              UART6, UART7, UART8, UART9, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
+              WDTRST3, WDTRST4, ]
         groups:
           allOf:
             - $ref: "/schemas/types.yaml#/definitions/string"
             - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
-              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, ESPI,
-              ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP, GPIT0,
-              GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
-              GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1,
-              I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3,
-              I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6,
-              JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ,
-              MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3,
-              MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4,
-              NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1,
-              NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE,
-              PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, PWM12G1,
-              PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, PWM3,
-              PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1,
-              QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3,
-              RMII4, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1,
-              SALT11G0, SALT11G1, SALT12G0, SALT12G1, SALT13G0, SALT13G1,
-              SALT14G0, SALT14G1, SALT15G0, SALT15G1, SALT16G0, SALT16G1,
-              SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9G0,
-              SALT9G1, SD1, SD2, SD3, SD3DAT4, SD3DAT5, SD3DAT6, SD3DAT7,
-              SGPM1, SGPS1, SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD,
-              SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2,
-              SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13,
-              TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8,
-              TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4,
-              UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6,
-              UART7, UART8, UART9, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3,
-              WDTRST4, ]
+              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1,
+              EMMCG4, EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID,
+              FWQSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5,
+              GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, GPIU6,
+              GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14,
+              I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9,
+              I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD,
+              LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, MACLINK4,
+              MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1,
+              NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,
+              NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,
+              OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1,
+              PWM12G0, PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0,
+              PWM15G1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1,
+              PWM9G0, PWM9G1, QSPI1, QSPI2, RGMII1, RGMII2, RGMII3, RGMII4,
+              RMII1, RMII2, RMII3, RMII4, RXD1, RXD2, RXD3, RXD4, SALT1,
+              SALT10G0, SALT10G1, SALT11G0, SALT11G1, SALT12G0, SALT12G1,
+              SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, SALT15G1,
+              SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7,
+              SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPS1, SIOONCTRL,
+              SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,
+              SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1,
+              TACH10, TACH11, TACH12, TACH13, TACH14, TACH15, TACH2, TACH3,
+              TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, THRU1, THRU2,
+              THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12G0,
+              UART12G1, UART13G0, UART13G1, UART6, UART7, UART8, UART9, VB,
+              VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4, ]
 
 required:
   - compatible

Documentation/devicetree/bindings/regulator/fixed-regulator.yaml

@@ -30,8 +30,8 @@ if:
 properties:
   compatible:
     enum:
-      - const: regulator-fixed
-      - const: regulator-fixed-clock
+      - regulator-fixed
+      - regulator-fixed-clock
 
   regulator-name: true
 

Documentation/devicetree/bindings/riscv/cpus.yaml

@@ -24,15 +24,17 @@ description: |
 
 properties:
   compatible:
-    items:
-      - enum:
-          - sifive,rocket0
-          - sifive,e5
-          - sifive,e51
-          - sifive,u54-mc
-          - sifive,u54
-          - sifive,u5
-      - const: riscv
+    oneOf:
+      - items:
+          - enum:
+              - sifive,rocket0
+              - sifive,e5
+              - sifive,e51
+              - sifive,u54-mc
+              - sifive,u54
+              - sifive,u5
+          - const: riscv
+      - const: riscv    # Simulator only
     description:
       Identifies that the hart uses the RISC-V instruction set
       and identifies the type of the hart.
@@ -66,12 +68,8 @@ properties:
       insensitive, letters in the riscv,isa string must be all
       lowercase to simplify parsing.
 
-  timebase-frequency:
-    type: integer
-    minimum: 1
-    description:
-      Specifies the clock frequency of the system timer in Hz.
-      This value is common to all harts on a single system image.
+  # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here
+  timebase-frequency: false
 
   interrupt-controller:
     type: object
@@ -93,7 +91,6 @@ properties:
 
 required:
   - riscv,isa
-  - timebase-frequency
   - interrupt-controller
 
 examples: