slide-switch translates slide switch position changes into normal button presses and releases for OpenWrt devices.
After installing slide-switch, follow the instructions in the OpenWrt
User Guide to add scripts for each switch position. Both
procd scripts (in /etc/rc.button) and hotplug scripts (in
/etc/hotplug.d/button) are supported.
Each switch position has a corresponding button name in the form
<switch name>-<switch position>. For example, the TP-Link TL-MR3020
has a switch named mode with positions "3g", "wisp" and "ap"; button
names for the positions would be mode-3g, mode-wisp and mode-ap.
See Supported Devices for a list of switch names
and positions.
slide-switch will trigger both button presses and releases. For example,
if the mode switch is moved from "3g" to "wisp", a release action will
be triggered for "3g" (BUTTON=mode-3g ACTION=released), and a press
action will be triggered for "wisp" (BUTTON=mode-wisp ACTION=pressed).
Note that the timeout action is not supported at this time.
On boot, slide-switch will also trigger a button press for the active
position of each switch. To disable or re-enable this behaviour, run
slide-switch boot disable or slide-switch boot enable, respectively.
slide-switch 0.9.0 has been tested with OpenWrt 15.05 (Chaos Calmer) and LEDE 17.01 (Reboot).
0.9.1 and higher should work with OpenWrt 18.06 and newer.
| Device | Switch Name | Switch Positions | Verified | Notes |
|---|---|---|---|---|
| Buffalo WZR-HP-AG300H | movie-engine | on / off | ||
| Buffalo WZR-HP-AG300H | router | on / off / auto | ||
| Buffalo WZR-HP-G300NH | movie-engine | on / off | ✔️ | |
| Buffalo WZR-HP-G300NH | router | on / off / auto | ✔️ | |
| GLI (GL.iNet) GL-AR150 | switch | left / center / right | ||
| GLI (GL.iNet) GL-AR300M | switch | left / center / right | ✔️ | |
| GLI (GL.iNet) GL-AR750 | switch | left / right | ✔️ | |
| GLI (GL.iNet) GL-AR750S | switch | left / right | ||
| GLI (GL.iNet) GL-MT300A | switch | left / center / right | ✔️ | |
| GLI (GL.iNet) GL-MT300N | switch | left / center / right | ✔️ | v1 (unverified) and v2 |
| HooToo HT-TM02 | mode | wired / wireless | ✔️ | |
| TP-Link TL-MR12U | mode | 3g / router / ap | ||
| TP-Link TL-MR13U | mode | 3g / router / ap | ||
| TP-Link TL-MR3020 | mode | 3g / wisp / ap | ✔️ | v1 and v3 |
| TP-Link TL-MR3040 | mode | 3g / wisp / ap | ✔️ | v2.0 and later |
| TP-Link TL-WR720N | mode | ap / 3g / router | v3 and v4 (Chinese version) | |
| TP-Link TL-WR810N | mode | router-ap / repeater / client | ✔️ | v1.1 (EU) and v2 (unverified) |
| TP-Link TL-WR902AC | mode | share-eth / share-hotspot / ap | ✔️ | v1 and v3 |
For most devices, switch data is initially collected from the OpenWrt wiki and from OpenWrt's source code. The Verified column indicates cases where the switch data has been tested and verified correct by users.
See NEWS.
Beyond code for bug fixes or new features, any help to verify switch data or add data for new devices would be greatly appreciated.
Copyright (C) 2016-2019 The slide-switch authors
https://github.com/jefferyto/openwrt-slide-switch
slide-switch is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License version 2 as published by the Free Software Foundation.
slide-switch is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with slide-switch. If not, see http://www.gnu.org/licenses/.