CI: rfl: add more tools and steps#128928
Merged
bors merged 6 commits intorust-lang:masterfrom Sep 5, 2024
Merged
Conversation
rustbot
added
A-testsuite
Member
|
@bors try |
21 tasks
Collaborator
bors
added a commit
to rust-lang-ci/rust
that referenced
this pull request
Aug 10, 2024
CI: rfl: add more tools and steps This will add some time for the tool building -- the actual steps should be quick, though, and allows us to cover quite a few more tools and unstable features in use. Please see the individual commits for a few details. Cc: `@GuillaumeGomez` `@tgross35` r? `@Kobzol` try-job: x86_64-rust-for-linux
This comment has been minimized.
This comment has been minimized.
Collaborator
|
💔 Test failed - checks-actions |
bors
added
S-waiting-on-author
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Apparently tools like `rustfmt` require it in order to find the right `librustc_driver.so` without extra tweaks. Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This change will also remove the current warnings in the build due to
`rustfmt` not being available (for `bindgen` output):
error: 'rustfmt' is not installed for the custom toolchain 'local'.
note: this is a custom toolchain, which cannot use `rustup component add`
help: if you built this toolchain from source, and used `rustup toolchain link`, then you may be able to build the component with `x.py`
Failed to run rustfmt: Internal rustfmt error (non-fatal, continuing)
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This particular target does not expand into much code, so it is a good first candidate to see if we could keep this in the CI. Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
It will make it easier to add more in the future. Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
ojeda
force-pushed
the
ci-rfl-more-tools
branch
from
9c011ce to
778ff06
Compare
Contributor
Author
|
@bors try |
bors
added a commit
to rust-lang-ci/rust
that referenced
this pull request
Aug 28, 2024
CI: rfl: add more tools and steps This will add some time for the tool building -- the actual steps should be quick, though, and allows us to cover quite a few more tools and unstable features in use. Please see the individual commits for a few details. Cc: `@GuillaumeGomez` `@tgross35` r? `@Kobzol` try-job: x86_64-rust-for-linux
Collaborator
Collaborator
|
☀️ Try build successful - checks-actions |
Contributor
Author
|
@Kobzol Moving to |
Member
|
This should work with just stage 1. The fact that |
ojeda
added a commit
to ojeda/linux
that referenced
this pull request
Sep 4, 2024
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Member
|
Ok fixing this "bug" (it's probably intended at the moment) would amount to rewriting half of bootstrap, apparently. So let's just use stage2 for now. @bors r+ |
Collaborator
bors
added
S-waiting-on-bors
ojeda
added a commit
to ojeda/linux
that referenced
this pull request
Oct 3, 2024
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
ojeda
added a commit
to Rust-for-Linux/linux
that referenced
this pull request
Oct 7, 2024
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
ojeda
added a commit
to Rust-for-Linux/linux
that referenced
this pull request
Oct 7, 2024
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
alistair23
pushed a commit
to alistair23/linux
that referenced
this pull request
Nov 11, 2024
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
alistair23
pushed a commit
to alistair23/linux
that referenced
this pull request
Nov 12, 2024
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst
pushed a commit
to herrnst/linux-asahi
that referenced
this pull request
Nov 21, 2024
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst
pushed a commit
to herrnst/linux-asahi
that referenced
this pull request
Nov 22, 2024
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
WhatAmISupposedToPutHere
pushed a commit
to WhatAmISupposedToPutHere/linux
that referenced
this pull request
Nov 23, 2024
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst
pushed a commit
to herrnst/linux-asahi
that referenced
this pull request
Nov 23, 2024
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst
pushed a commit
to herrnst/linux-asahi
that referenced
this pull request
Dec 5, 2024
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst
pushed a commit
to herrnst/linux-asahi
that referenced
this pull request
Dec 6, 2024
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
jannau
pushed a commit
to AsahiLinux/linux
that referenced
this pull request
Dec 7, 2024
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst
pushed a commit
to herrnst/linux-asahi
that referenced
this pull request
Dec 21, 2024
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
chadmed
pushed a commit
to chadmed/linux
that referenced
this pull request
Jan 5, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst
pushed a commit
to herrnst/linux-asahi
that referenced
this pull request
Jan 5, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst
pushed a commit
to herrnst/linux-asahi
that referenced
this pull request
Jan 16, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst
pushed a commit
to herrnst/linux-asahi
that referenced
this pull request
Jan 18, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst
pushed a commit
to herrnst/linux-asahi
that referenced
this pull request
Jan 29, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst
pushed a commit
to herrnst/linux-asahi
that referenced
this pull request
Jan 29, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst
pushed a commit
to herrnst/linux-asahi
that referenced
this pull request
Feb 3, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst
pushed a commit
to herrnst/linux-asahi
that referenced
this pull request
Feb 17, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
herrnst
pushed a commit
to herrnst/linux-asahi
that referenced
this pull request
Feb 17, 2025
Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
ojeda
added a commit
to ojeda/linux
that referenced
this pull request
Mar 7, 2025
commit 7d56786 upstream. Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
ojeda
added a commit
to ojeda/linux
that referenced
this pull request
Mar 7, 2025
commit 7d56786 upstream. Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
gregkh
pushed a commit
to gregkh/linux
that referenced
this pull request
Mar 13, 2025
commit 7d56786 upstream. Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
oraclelinuxkernel
pushed a commit
to oracle/linux-uek
that referenced
this pull request
Apr 14, 2025
commit 7d56786 upstream. Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit 503e18c448bff08281a5f7e955335892f144cd36) Signed-off-by: Jack Vogel <jack.vogel@oracle.com>
tuxedo-bot
pushed a commit
to tuxedocomputers/linux
that referenced
this pull request
May 27, 2025
BugLink: https://bugs.launchpad.net/bugs/2107437 commit 7d56786 upstream. Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Noah Wager <noah.wager@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
nvidia-bfigg
pushed a commit
to NVIDIA/NV-Kernels
that referenced
this pull request
Sep 3, 2025
BugLink: https://bugs.launchpad.net/bugs/2117533 commit 7d56786 upstream. Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Noah Wager <noah.wager@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>
junho-falinux
pushed a commit
to junho-falinux/linux-ubuntu
that referenced
this pull request
Sep 11, 2025
BugLink: https://bugs.launchpad.net/bugs/2117533 commit 7d56786 upstream. Some Clippy lints can be configured/tweaked. We will use these knobs to our advantage in later commits. This is done via a configuration file, `.clippy.toml` [1]. The file is currently unstable. This may be a problem in the future, but we can adapt as needed. In addition, we proposed adding Clippy to the Rust CI's RFL job [2], so we should be able to catch issues pre-merge. Thus introduce the file. Link: https://doc.rust-lang.org/clippy/configuration.html [1] Link: rust-lang/rust#128928 [2] Reviewed-by: Alice Ryhl <aliceryhl@google.com> Reviewed-by: Trevor Gross <tmgross@umich.edu> Tested-by: Gary Guo <gary@garyguo.net> Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20240904204347.168520-12-ojeda@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Noah Wager <noah.wager@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
5 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
This will add some time for the tool building -- the actual steps should be quick, though, and allows us to cover quite a few more tools and unstable features in use.
Please see the individual commits for a few details.
Cc: @GuillaumeGomez @tgross35
r? @Kobzol
try-job: x86_64-rust-for-linux