PTZ not working

[WildRat]

Could you, please, help me solve missing PTZ problem? Other functions are working. I try swapping ptz bin - camera self calibrates, but PTZ controls did not work.

Reported at webpage info:
Firmware Version 0.1.2
Base Version V5520.2053.0402build20220712
Model
Device ID a63001b3fb
In eWelink app i see firmware name as GK-200MP2D

I can make fylesystem dumps if needed.

[roleoroleo]

Which control are you using to test PTZ?
onvif, web page, ...?

[WildRat]

ONVIF. Web page show message PTZ not supported.

[roleoroleo]

GK-200MP2D is not supported at the moment.
If you have a backup of the flash I could check if I can support it.

[WildRat]

Please take a look when you have time. Here (backup.zip) are the files obtained through the script (Dump your backup firmware (SD card)). And this is a new version of the firmware that they sent with corrected time zones: Time zone issue Fix package.zip.

[roleoroleo]

Sorry but, after checking your backup, I found an error in the backup script at this page:
https://github.com/roleoroleo/sonoff-hack/wiki/Dump-your-backup-firmware-(SD-card))

Now, I updated it.
Please download it again and repeat the procedure.

[WildRat]

I made a dump using the new version of the script: LINK REMOVED

[roleoroleo]

Your cam is the same as in this post:
#85

Sorry but I cannot support it, at the moment.

[WildRat]

I understand, thanks. Apparently this is a new version of this model. If there is an opportunity to work on this version, I can help check the functionality.

[roleoroleo]

To work on this version, we need to apply a lot of changes.
But a cam is needed.
And these changes must not break compatibility with the old version.
@puuu is working on it.

[ConorIA]

This should be fixed in 0.1.3.
#85 (comment)

[WildRat]

But which version should I use?

[roleoroleo]

Based on the backup you shared with me, use GK-200MP2-B.

[roleoroleo]

@puuu @ConorIA
Please reinstall 0.1.3 from scratch to avoid problem of future updates.
If you already installed a beta.

[WildRat]

It's working without errors, but VERY slow. Video frame in 3-5 seconds. PTZ controls reacts once in 30-70 seconds.