Camera saves preset names but does not go to..

[PAOK1926]

hello all,

i have a couple of these cameras, using your hack, but i have a problem.
when i try to save preset, it saves the name.
but when i ask to go to this preset, it does not go.
the same with the initial preset. when camera reboots, looks at the ceiling, always :)

[roleoroleo]

Please, post your ptz_presets.conf
cat /mnt/mmc/sonoff-hack/etc/ptz_presets.conf

[solidar-it]

[root@Camera2]# cat /mnt/mmc/sonoff-hack/etc/ptz_presets.conf
0=workplace1|2293|1350
1=entrance2|1752|1350
2=entrance|1783|1350
3=Kaliv2|2355|1350
4=phil|2154|1350
5=phil2|2154|1350
6=empty|-1|-1
7=empty|-1|-1
8=empty|-1|-1
9=empty|-1|-1

[roleoroleo]

I fixed a couple of errors.
Please try this binary.
You have to test which file is correct for your cam (ptz_h or ptz_p). It depends on the hardware.
Then, overwrite current /mnt/mmc/sonoff-hack/bin/ptz
ptz.tgz

[w35m17h]

Hi, how do you determine which bin is the correct file?

Note: I ended up doing this:

SSH into camera after first boot

/tmp/ptz_p -a right # if camera moves, use ptz_p
/tmp/ptz_h -a right # if camera moves, use ptz_h

ptz_p ended up being the one that moved my camera, so I replaced /mnt/mmc/sonoff-hack/bin/ptz with ptz_p.

I can confirm that the new binary fixed my preset issue. Thank You!

[github-actions]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.