Skip to content

Commit

Permalink
target/riscv: deprecate riscv set_reset_timeout_sec
Browse files Browse the repository at this point in the history 
Change-Id: I46bf3e4dab2a99c97b7ab133a85c13332365f9b7
Signed-off-by: Evgeniy Naydanov <evgeniy.naydanov@syntacore.com>
  • Loading branch information
@en-sc
en-sc committed Jul 4, 2024
1 parent f5f5f6d commit f3abfe4
Show file tree
Hide file tree
Showing 5 changed files with 41 additions and 77 deletions.
5 changes: 0 additions & 5 deletions doc/openocd.texi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -11290,11 +11290,6 @@ Set the wall-clock timeout (in seconds) for individual commands. The default
should work fine for all but the slowest targets (eg. simulators).
@end deffn

@deffn {Command} {riscv set_reset_timeout_sec} [seconds]
Set the maximum time to wait for a hart to come out of reset after reset is
deasserted.
@end deffn

@deffn {Command} {riscv set_mem_access} method1 [method2] [method3]
Specify which RISC-V memory access method(s) shall be used, and in which order
of priority. At least one method must be specified.
Expand Down
10 changes: 5 additions & 5 deletions src/target/riscv/riscv-011.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -741,7 +741,7 @@ static int wait_for_debugint_clear(struct target *target, bool ignore_first)

if (!bits.interrupt)
return ERROR_OK;
if (time(NULL) - start > riscv_command_timeout_sec) {
if (time(NULL) - start > riscv_get_command_timeout_sec()) {
LOG_ERROR("Timed out waiting for debug int to clear."
"Increase timeout with riscv set_command_timeout_sec.");
return ERROR_FAIL;
Expand Down Expand Up @@ -1025,7 +1025,7 @@ static int wait_for_state(struct target *target, enum target_state state)
return result;
if (target->state == state)
return ERROR_OK;
if (time(NULL) - start > riscv_command_timeout_sec) {
if (time(NULL) - start > riscv_get_command_timeout_sec()) {
LOG_ERROR("Timed out waiting for state %d. "
"Increase timeout with riscv set_command_timeout_sec.", state);
return ERROR_FAIL;
Expand Down Expand Up @@ -1186,7 +1186,7 @@ static int full_step(struct target *target, bool announce)
return result;
if (target->state != TARGET_DEBUG_RUNNING)
break;
if (time(NULL) - start > riscv_command_timeout_sec) {
if (time(NULL) - start > riscv_get_command_timeout_sec()) {
LOG_ERROR("Timed out waiting for step to complete."
"Increase timeout with riscv set_command_timeout_sec");
return ERROR_FAIL;
Expand Down Expand Up @@ -2344,10 +2344,10 @@ static int wait_for_authbusy(struct target *target)
uint32_t dminfo = dbus_read(target, DMINFO);
if (!get_field(dminfo, DMINFO_AUTHBUSY))
break;
if (time(NULL) - start > riscv_command_timeout_sec) {
if (time(NULL) - start > riscv_get_command_timeout_sec()) {
LOG_ERROR("Timed out after %ds waiting for authbusy to go low (dminfo=0x%x). "
"Increase the timeout with riscv set_command_timeout_sec.",
riscv_command_timeout_sec,
riscv_get_command_timeout_sec(),
dminfo);
return ERROR_FAIL;
}
Expand Down
79 changes: 23 additions & 56 deletions src/target/riscv/riscv-013.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -695,12 +695,12 @@ static int dmi_op(struct target *target, uint32_t *data_in,
uint32_t data_out, bool exec, bool ensure_success)
{
int result = dmi_op_timeout(target, data_in, dmi_busy_encountered, op,
address, data_out, riscv_command_timeout_sec, exec, ensure_success);
address, data_out, riscv_get_command_timeout_sec(), exec, ensure_success);
if (result == ERROR_TIMEOUT_REACHED) {
LOG_TARGET_ERROR(target, "DMI operation didn't complete in %d seconds. The target is "
"either really slow or broken. You could increase the "
"timeout with riscv set_command_timeout_sec.",
riscv_command_timeout_sec);
riscv_get_command_timeout_sec());
return ERROR_FAIL;
}
return result;
Expand Down Expand Up @@ -731,17 +731,6 @@ static uint32_t riscv013_get_dmi_address(const struct target *target, uint32_t a
return address + base;
}

static int dm_op_timeout(struct target *target, uint32_t *data_in,
bool *dmi_busy_encountered, int op, uint32_t address,
uint32_t data_out, int timeout_sec, bool exec, bool ensure_success)
{
dm013_info_t *dm = get_dm(target);
if (!dm)
return ERROR_FAIL;
return dmi_op_timeout(target, data_in, dmi_busy_encountered, op, address + dm->base,
data_out, timeout_sec, exec, ensure_success);
}

static int dm_op(struct target *target, uint32_t *data_in,
bool *dmi_busy_encountered, int op, uint32_t address,
uint32_t data_out, bool exec, bool ensure_success)
Expand Down Expand Up @@ -805,11 +794,10 @@ static bool check_dbgbase_exists(struct target *target)
return false;
}

static int dmstatus_read_timeout(struct target *target, uint32_t *dmstatus,
bool authenticated, unsigned timeout_sec)
static int dmstatus_read(struct target *target, uint32_t *dmstatus,
bool authenticated)
{
int result = dm_op_timeout(target, dmstatus, NULL, DMI_OP_READ,
DM_DMSTATUS, 0, timeout_sec, false, true);
int result = dm_read(target, dmstatus, DM_DMSTATUS);
if (result != ERROR_OK)
return result;
int dmstatus_version = get_field(*dmstatus, DM_DMSTATUS_VERSION);
Expand All @@ -827,19 +815,6 @@ static int dmstatus_read_timeout(struct target *target, uint32_t *dmstatus,
return ERROR_OK;
}

static int dmstatus_read(struct target *target, uint32_t *dmstatus,
bool authenticated)
{
int result = dmstatus_read_timeout(target, dmstatus, authenticated,
riscv_command_timeout_sec);
if (result == ERROR_TIMEOUT_REACHED)
LOG_TARGET_ERROR(target, "DMSTATUS read didn't complete in %d seconds. The target is "
"either really slow or broken. You could increase the "
"timeout with `riscv set_command_timeout_sec`.",
riscv_command_timeout_sec);
return result;
}

static int increase_ac_busy_delay(struct target *target)
{
riscv013_info_t *info = get_info(target);
Expand Down Expand Up @@ -890,12 +865,12 @@ static int wait_for_idle(struct target *target, uint32_t *abstractcs)
dm->abstract_cmd_maybe_busy = false;
return ERROR_OK;
}
} while ((time(NULL) - start) < riscv_command_timeout_sec);
} while ((time(NULL) - start) < riscv_get_command_timeout_sec());

LOG_TARGET_ERROR(target,
"Timed out after %ds waiting for busy to go low (abstractcs=0x%" PRIx32 "). "
"Increase the timeout with riscv set_command_timeout_sec.",
riscv_command_timeout_sec,
riscv_get_command_timeout_sec(),
*abstractcs);

if (!dm->abstract_cmd_maybe_busy)
Expand Down Expand Up @@ -1898,10 +1873,10 @@ static int wait_for_authbusy(struct target *target, uint32_t *dmstatus)
*dmstatus = value;
if (!get_field(value, DM_DMSTATUS_AUTHBUSY))
break;
if (time(NULL) - start > riscv_command_timeout_sec) {
if (time(NULL) - start > riscv_get_command_timeout_sec()) {
LOG_TARGET_ERROR(target, "Timed out after %ds waiting for authbusy to go low (dmstatus=0x%x). "
"Increase the timeout with riscv set_command_timeout_sec.",
riscv_command_timeout_sec,
riscv_get_command_timeout_sec(),
value);
return ERROR_FAIL;
}
Expand Down Expand Up @@ -2091,11 +2066,10 @@ static int reset_dm(struct target *target)
if (result != ERROR_OK)
return result;

if (time(NULL) - start > riscv_reset_timeout_sec) {
/* TODO: Introduce a separate timeout for this. */
if (time(NULL) - start > riscv_get_command_timeout_sec()) {
LOG_TARGET_ERROR(target, "DM didn't acknowledge reset in %d s. "
"Increase the timeout with 'riscv set_reset_timeout_sec'.",
riscv_reset_timeout_sec);
"Increase the timeout with 'riscv set_command_timeout_sec'.",
riscv_get_command_timeout_sec());
return ERROR_TIMEOUT_REACHED;
}
} while (get_field32(dmcontrol, DM_DMCONTROL_DMACTIVE));
Expand All @@ -2114,11 +2088,10 @@ static int reset_dm(struct target *target)
if (result != ERROR_OK)
return result;

if (time(NULL) - start > riscv_reset_timeout_sec) {
/* TODO: Introduce a separate timeout for this. */
if (time(NULL) - start > riscv_get_command_timeout_sec()) {
LOG_TARGET_ERROR(target, "Debug Module did not become active in %d s. "
"Increase the timeout with 'riscv set_reset_timeout_sec'.",
riscv_reset_timeout_sec);
"Increase the timeout with 'riscv set_command_timeout_sec'.",
riscv_get_command_timeout_sec());
return ERROR_TIMEOUT_REACHED;
}
} while (!get_field32(dmcontrol, DM_DMCONTROL_DMACTIVE));
Expand Down Expand Up @@ -2810,7 +2783,7 @@ static int batch_run_timeout(struct target *target, struct riscv_batch *batch)
result = increase_dmi_busy_delay(target);
if (result != ERROR_OK)
return result;
} while (time(NULL) - start < riscv_command_timeout_sec);
} while (time(NULL) - start < riscv_get_command_timeout_sec());

assert(result == ERROR_OK);
assert(riscv_batch_was_batch_busy(batch));
Expand All @@ -2825,7 +2798,7 @@ static int batch_run_timeout(struct target *target, struct riscv_batch *batch)
LOG_TARGET_ERROR(target, "DMI operation didn't complete in %d seconds. "
"The target is either really slow or broken. You could increase "
"the timeout with riscv set_command_timeout_sec.",
riscv_command_timeout_sec);
riscv_get_command_timeout_sec());
return ERROR_TIMEOUT_REACHED;
}

Expand Down Expand Up @@ -3225,21 +3198,15 @@ static int deassert_reset(struct target *target)
time_t start = time(NULL);
LOG_TARGET_DEBUG(target, "Waiting for hart to come out of reset.");
do {
result = dmstatus_read_timeout(target, &dmstatus, true,
riscv_reset_timeout_sec);
if (result == ERROR_TIMEOUT_REACHED)
LOG_TARGET_ERROR(target, "Hart didn't complete a DMI read coming "
"out of reset in %ds; Increase the timeout with riscv "
"set_reset_timeout_sec.",
riscv_reset_timeout_sec);
result = dmstatus_read(target, &dmstatus, true);
if (result != ERROR_OK)
return result;

if (time(NULL) - start > riscv_reset_timeout_sec) {
if (time(NULL) - start > riscv_get_command_timeout_sec()) {
LOG_TARGET_ERROR(target, "Hart didn't leave reset in %ds; "
"dmstatus=0x%x (allunavail=%s, allhavereset=%s); "
"Increase the timeout with riscv set_reset_timeout_sec.",
riscv_reset_timeout_sec, dmstatus,
"Increase the timeout with riscv set_command_timeout_sec.",
riscv_get_command_timeout_sec(), dmstatus,
get_field(dmstatus, DM_DMSTATUS_ALLUNAVAIL) ? "true" : "false",
get_field(dmstatus, DM_DMSTATUS_ALLHAVERESET) ? "true" : "false");
return ERROR_TIMEOUT_REACHED;
Expand Down Expand Up @@ -3425,10 +3392,10 @@ static int read_sbcs_nonbusy(struct target *target, uint32_t *sbcs)
return ERROR_FAIL;
if (!get_field(*sbcs, DM_SBCS_SBBUSY))
return ERROR_OK;
if (time(NULL) - start > riscv_command_timeout_sec) {
if (time(NULL) - start > riscv_get_command_timeout_sec()) {
LOG_TARGET_ERROR(target, "Timed out after %ds waiting for sbbusy to go low (sbcs=0x%x). "
"Increase the timeout with riscv set_command_timeout_sec.",
riscv_command_timeout_sec, *sbcs);
riscv_get_command_timeout_sec(), *sbcs);
return ERROR_FAIL;
}
}
Expand Down
16 changes: 11 additions & 5 deletions src/target/riscv/riscv.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -140,10 +140,15 @@ struct tdata1_cache {
};

/* Wall-clock timeout for a command/access. Settable via RISC-V Target commands.*/
int riscv_command_timeout_sec = DEFAULT_COMMAND_TIMEOUT_SEC;
static int riscv_command_timeout_sec_value = DEFAULT_COMMAND_TIMEOUT_SEC;

/* Wall-clock timeout after reset. Settable via RISC-V Target commands.*/
int riscv_reset_timeout_sec = DEFAULT_RESET_TIMEOUT_SEC;
/* DEPRECATED Wall-clock timeout after reset. Settable via RISC-V Target commands.*/
static int riscv_reset_timeout_sec = DEFAULT_COMMAND_TIMEOUT_SEC;

int riscv_get_command_timeout_sec(void)
{
return MAX(riscv_command_timeout_sec_value, riscv_reset_timeout_sec);
}

static bool riscv_enable_virt2phys = true;

Expand Down Expand Up @@ -3853,13 +3858,14 @@ COMMAND_HANDLER(riscv_set_command_timeout_sec)
return ERROR_FAIL;
}

riscv_command_timeout_sec = timeout;
riscv_command_timeout_sec_value = timeout;

return ERROR_OK;
}

COMMAND_HANDLER(riscv_set_reset_timeout_sec)
{
LOG_WARNING("The command 'riscv set_reset_timeout_sec' is deprecated! Please, use 'riscv set_command_timeout_sec'.");
if (CMD_ARGC != 1) {
LOG_ERROR("Command takes exactly 1 parameter.");
return ERROR_COMMAND_SYNTAX_ERROR;
Expand Down Expand Up @@ -5066,7 +5072,7 @@ static const struct command_registration riscv_exec_command_handlers[] = {
.handler = riscv_set_reset_timeout_sec,
.mode = COMMAND_ANY,
.usage = "[sec]",
.help = "Set the wall-clock timeout (in seconds) after reset is deasserted"
.help = "DEPRECATED. Use 'riscv set_command_timeout_sec' instead."
},
{
.name = "set_mem_access",
Expand Down
8 changes: 2 additions & 6 deletions src/target/riscv/riscv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -22,8 +22,7 @@ struct riscv_program;
#define RISCV_MAX_HWBPS 16
#define RISCV_MAX_DMS 100

#define DEFAULT_COMMAND_TIMEOUT_SEC 2
#define DEFAULT_RESET_TIMEOUT_SEC 30
#define DEFAULT_COMMAND_TIMEOUT_SEC 5

#define RISCV_SATP_MODE(xlen) ((xlen) == 32 ? SATP32_MODE : SATP64_MODE)
#define RISCV_SATP_PPN(xlen) ((xlen) == 32 ? SATP32_PPN : SATP64_PPN)
Expand Down Expand Up @@ -340,10 +339,7 @@ typedef struct {
} virt2phys_info_t;

/* Wall-clock timeout for a command/access. Settable via RISC-V Target commands.*/
extern int riscv_command_timeout_sec;

/* Wall-clock timeout after reset. Settable via RISC-V Target commands.*/
extern int riscv_reset_timeout_sec;
int riscv_get_command_timeout_sec(void);

extern bool riscv_enable_virtual;

Expand Down

0 comments on commit f3abfe4

Please sign in to comment.