Remove duplicated checks of vhost queue limit

deps/rabbit/src/rabbit_amqp_management.erl

@@ -142,7 +142,6 @@ handle_http_req(HttpMethod = <<"PUT">>,
         {ok, Result} ->
             Result;
         {error, not_found} ->
-            ok = check_vhost_queue_limit(QName),
             PermCache2 = check_dead_letter_exchange(QName, QArgs, User, PermCache1),
             case rabbit_amqqueue:declare(
                    QName, Durable, AutoDelete, QArgs, Owner, Username) of
@@ -160,6 +159,10 @@ handle_http_req(HttpMethod = <<"PUT">>,
                     %% Must have been created in the meantime. Loop around again.
                     handle_http_req(HttpMethod, PathSegments, Query, ReqPayload,
                                     Vhost, User, ConnPid, {PermCache2, TopicPermCache});
+                {error, queue_limit_exceeded, Reason, ReasonArgs} ->
+                    throw(<<"403">>,
+                          Reason,
+                          ReasonArgs);
                 {protocol_error, _ErrorType, Reason, ReasonArgs} ->
                     throw(<<"400">>, Reason, ReasonArgs)
             end;
@@ -676,17 +679,6 @@ prohibit_reserved_amq(Res = #resource{name = <<"amq.", _/binary>>}) ->
 prohibit_reserved_amq(#resource{}) ->
     ok.
 
-check_vhost_queue_limit(QName = #resource{virtual_host = Vhost}) ->
-    case rabbit_vhost_limit:is_over_queue_limit(Vhost) of
-        false ->
-            ok;
-        {true, Limit} ->
-            throw(<<"403">>,
-                  "refused to declare ~ts because vhost queue limit ~b is reached",
-                  [rabbit_misc:rs(QName), Limit])
-    end.
-
-
 check_dead_letter_exchange(QName = #resource{virtual_host = Vhost}, QArgs, User, PermCache0) ->
     case rabbit_misc:r_arg(Vhost, exchange, QArgs, ?DEAD_LETTER_EXCHANGE_KEY) of
         undefined ->

deps/rabbit/src/rabbit_amqp_session.erl

@@ -71,7 +71,7 @@
 -export([init/1,
          terminate/2,
          handle_call/3,
-         handle_cast/2, 
+         handle_cast/2,
          handle_info/2,
          format_status/1]).
 
@@ -2612,7 +2612,6 @@ declare_queue(QNameBin,
               PermCache0) ->
     QName = rabbit_misc:r(Vhost, queue, QNameBin),
     PermCache = check_resource_access(QName, configure, User, PermCache0),
-    check_vhost_queue_limit(Vhost, QName),
     rabbit_core_metrics:queue_declared(QName),
     Q0 = amqqueue:new(QName,
                       _Pid = none,
@@ -2628,6 +2627,11 @@ declare_queue(QNameBin,
             rabbit_core_metrics:queue_created(QName);
         {existing, _Q} ->
             ok;
+        {error, queue_limit_exceeded, Reason, ReasonArgs} ->
+            protocol_error(
+              ?V_1_0_AMQP_ERROR_RESOURCE_LIMIT_EXCEEDED,
+              Reason,
+              ReasonArgs);
         Other ->
             protocol_error(?V_1_0_AMQP_ERROR_INTERNAL_ERROR,
                            "Failed to declare ~s: ~p",
@@ -2867,17 +2871,6 @@ check_topic_authorisation(#exchange{type = topic,
 check_topic_authorisation(_, _, _, _, Cache) ->
     Cache.
 
-check_vhost_queue_limit(Vhost, QName) ->
-    case rabbit_vhost_limit:is_over_queue_limit(Vhost) of
-        false ->
-            ok;
-        {true, Limit} ->
-            protocol_error(
-              ?V_1_0_AMQP_ERROR_RESOURCE_LIMIT_EXCEEDED,
-              "cannot declare ~ts: vhost queue limit (~p) is reached",
-              [rabbit_misc:rs(QName), Limit])
-    end.
-
 check_user_id(Mc, User) ->
     case rabbit_access_control:check_user_id(Mc, User) of
         ok ->

deps/rabbit/src/rabbit_amqqueue.erl

@@ -201,6 +201,7 @@ find_recoverable_queues() ->
     {'new' | 'existing' | 'owner_died', amqqueue:amqqueue()} |
     {'new', amqqueue:amqqueue(), rabbit_fifo_client:state()} |
     {'absent', amqqueue:amqqueue(), absent_reason()} |
+    {'error', Type :: atom(), Reason :: string(), Args :: term()} |
     {protocol_error, Type :: atom(), Reason :: string(), Args :: term()}.
 declare(QueueName, Durable, AutoDelete, Args, Owner, ActingUser) ->
     declare(QueueName, Durable, AutoDelete, Args, Owner, ActingUser, node()).
@@ -219,6 +220,7 @@ declare(QueueName, Durable, AutoDelete, Args, Owner, ActingUser) ->
               node() | {'ignore_location', node()}) ->
     {'new' | 'existing' | 'owner_died', amqqueue:amqqueue()} |
     {'absent', amqqueue:amqqueue(), absent_reason()} |
+    {'error', Type :: atom(), Reason :: string(), Args :: term()} |
     {protocol_error, Type :: atom(), Reason :: string(), Args :: term()}.
 declare(QueueName = #resource{virtual_host = VHost}, Durable, AutoDelete, Args,
         Owner, ActingUser, Node) ->

deps/rabbit/src/rabbit_channel.erl

@@ -2503,6 +2503,8 @@ handle_method(#'queue.declare'{queue       = QueueNameBin,
                     %% connection has died. Pretend the queue exists though,
                     %% just so nothing fails.
                     {ok, QueueName, 0, 0};
+                {error, queue_limit_exceeded, Reason, ReasonArgs} ->
+                    rabbit_misc:precondition_failed(Reason, ReasonArgs);
                 {protocol_error, ErrorType, Reason, ReasonArgs} ->
                     rabbit_misc:protocol_error(ErrorType, Reason, ReasonArgs)
             end;

deps/rabbit/src/rabbit_queue_type.erl

@@ -304,6 +304,7 @@ is_compatible(Type, Durable, Exclusive, AutoDelete) ->
     {'new' | 'existing' | 'owner_died', amqqueue:amqqueue()} |
     {'absent', amqqueue:amqqueue(), rabbit_amqqueue:absent_reason()} |
     {protocol_error, Type :: atom(), Reason :: string(), Args :: term()} |
+    {'error', Type :: atom(), Reason :: string(), Args :: term()} |
     {'error', Err :: term() }.
 declare(Q0, Node) ->
     Q = rabbit_queue_decorator:set(rabbit_policy:set(Q0)),
@@ -774,7 +775,7 @@ known_queue_type_names() ->
 
 -spec check_queue_limits(amqqueue:amqqueue()) ->
           ok |
-          {protocol_error, Type :: atom(), Reason :: string(), Args :: term()}.
+          {error, queue_limit_exceeded, Reason :: string(), Args :: term()}.
 check_queue_limits(Q) ->
     maybe
         ok ?= check_vhost_queue_limit(Q),
@@ -788,10 +789,9 @@ check_vhost_queue_limit(Q) ->
         false ->
             ok;
         {true, Limit} ->
-            {protocol_error, precondition_failed,
-             "cannot declare queue '~ts': "
-             "queue limit in vhost '~ts' (~tp) is reached",
-             [QueueName, VHost, Limit]}
+            queue_limit_error("cannot declare queue '~ts': "
+                              "queue limit in vhost '~ts' (~tp) is reached",
+                              [QueueName, VHost, Limit])
     end.
 
 check_cluster_queue_limit(Q) ->
@@ -802,11 +802,13 @@ check_cluster_queue_limit(Q) ->
         Limit ->
             case rabbit_db_queue:count() >= Limit of
                 true ->
-                    {protocol_error, precondition_failed,
-                     "cannot declare queue '~ts': "
-                     "queue limit in cluster (~tp) is reached",
-                     [QueueName, Limit]};
+                    queue_limit_error("cannot declare queue '~ts': "
+                                      "queue limit in cluster (~tp) is reached",
+                                      [QueueName, Limit]);
                 false ->
                     ok
             end
     end.
+
+queue_limit_error(Reason, ReasonArgs) ->
+    {error, queue_limit_exceeded, Reason, ReasonArgs}.

deps/rabbit/test/amqp_auth_SUITE.erl

@@ -727,7 +727,7 @@ v1_vhost_queue_limit(Config) ->
                        Session1, <<"test-sender-1">>, TargetAddress),
     ExpectedErr = amqp_error(
                     ?V_1_0_AMQP_ERROR_RESOURCE_LIMIT_EXCEEDED,
-                    <<"cannot declare queue 'q1' in vhost 'test vhost': vhost queue limit (0) is reached">>),
+                    <<"cannot declare queue 'q1': queue limit in vhost 'test vhost' (0) is reached">>),
     receive {amqp10_event, {session, Session1, {ended, ExpectedErr}}} -> ok
     after 5000 -> flush(missing_ended),
                   ct:fail("did not receive expected error")
@@ -831,8 +831,7 @@ declare_queue_vhost_queue_limit(Config) ->
     ?assertMatch(#{subject := <<"403">>}, amqp10_msg:properties(Resp)),
     ?assertEqual(
        #'v1_0.amqp_value'{
-          content = {utf8, <<"refused to declare queue '", QName/binary, "' in vhost 'test vhost' ",
-                             "because vhost queue limit 0 is reached">>}},
+          content = {utf8, <<"cannot declare queue '", QName/binary, "': queue limit in vhost 'test vhost' (0) is reached">>}},
        amqp10_msg:body(Resp)),
 
     ok = cleanup_pair(Init),

deps/rabbitmq_mqtt/src/rabbit_mqtt_processor.erl

@@ -1354,32 +1354,27 @@ create_queue(QNamePart, QOwner, QArgs, QType,
                           Err0 -> Err0
                       end
               end,
-        case rabbit_vhost_limit:is_over_queue_limit(VHost) of
-            false ->
-                rabbit_core_metrics:queue_declared(QName),
-                Q0 = amqqueue:new(QName,
-                                  none,
-                                  _Durable = true,
-                                  _AutoDelete = false,
-                                  QOwner,
-                                  QArgs,
-                                  VHost,
-                                  #{user => Username},
-                                  QType),
-                case rabbit_queue_type:declare(Q0, node()) of
-                    {new, Q} when ?is_amqqueue(Q) ->
-                        rabbit_core_metrics:queue_created(QName),
-                        {ok, Q};
-                    Other ->
-                        ?LOG_ERROR("Failed to declare ~s: ~p",
-                                   [rabbit_misc:rs(QName), Other]),
-                        {error, queue_declare}
-                end;
-            {true, Limit} ->
-                ?LOG_ERROR("cannot declare ~s because "
-                           "queue limit ~p in vhost '~s' is reached",
-                           [rabbit_misc:rs(QName), Limit, VHost]),
-                {error, queue_limit_exceeded}
+        rabbit_core_metrics:queue_declared(QName),
+        Q0 = amqqueue:new(QName,
+                          none,
+                          _Durable = true,
+                          _AutoDelete = false,
+                          QOwner,
+                          QArgs,
+                          VHost,
+                          #{user => Username},
+                          QType),
+        case rabbit_queue_type:declare(Q0, node()) of
+            {new, Q} when ?is_amqqueue(Q) ->
+                rabbit_core_metrics:queue_created(QName),
+                {ok, Q};
+            {error, queue_limit_exceeded, Reason, ReasonArgs} ->
+                ?LOG_ERROR(Reason, ReasonArgs),
+                {error, queue_limit_exceeded};
+            Other ->
+                ?LOG_ERROR("Failed to declare ~s: ~p",
+                           [rabbit_misc:rs(QName), Other]),
+                {error, queue_declare}
         end
     else
         {error, access_refused} = Err ->

deps/rabbitmq_stream/src/rabbit_stream_manager.erl

@@ -524,15 +524,6 @@ handle_info(Info, State) ->
 create_stream(VirtualHost, Reference, Arguments, Username) ->
     StreamQueueArguments = stream_queue_arguments(Arguments),
     maybe
-        ok ?= case rabbit_vhost_limit:is_over_queue_limit(VirtualHost) of
-                  false ->
-                      ok;
-                  {true, Limit} ->
-                      rabbit_log:warning("Cannot declare stream ~tp because "
-                                         "queue limit ~tp in vhost '~tp' is reached",
-                                         [Reference, Limit, VirtualHost]),
-                      {error, validation_failed}
-              end,
         ok ?= validate_stream_queue_arguments(StreamQueueArguments),
         do_create_stream(VirtualHost, Reference, StreamQueueArguments, Username)
     else
@@ -581,6 +572,12 @@ do_create_stream(VirtualHost, Reference, StreamQueueArguments, Username) ->
                             rabbit_log:warning("Error while creating ~tp stream, ~tp",
                                                [Reference, Err]),
                             {error, internal_error};
+                        {error,
+                         queue_limit_exceeded, Reason, ReasonArg} ->
+                            rabbit_log:warning("Cannot declare stream ~tp because, "
+                                               ++ Reason,
+                                               [Reference] ++ ReasonArg),
+                            {error, validation_failed};
                         {protocol_error,
                          precondition_failed,
                          Msg,